Your the man! Just the help I needed, thanks for sharing
@bobit87422 ай бұрын
how come yours set look perfect, received mine new and they all have light scratches. The bigger wrenches open end have like line/scratches or pits in the open end 😒.
@skrivehole2 ай бұрын
did you put the new bushing back in same way you took them out?
@richperkins51922 ай бұрын
I have a press and this still looks like the way to go! Your the man
@vintagemoto14 ай бұрын
I had to add a little heat to mine but than again they were in there since 1971 . Great tip !!
@fixityaon97745 ай бұрын
Nice trick. Tks
@angelm0076 ай бұрын
You've saved people lots of time and effort. Thanks!
@zo6rwhp7 ай бұрын
I sent back a whole set the etching was horrible 😢
@zo6rwhp8 ай бұрын
They are as tuff as a tank
@zraker78 ай бұрын
Have you ever had to replace the capacitor?
@janmichaeloliveros76079 ай бұрын
this is a great DIY'er tip if you don't have a bushing puller.. thanks for the tip..
@nordicpride97089 ай бұрын
You can just come out and say Snap On. Stop beating around the bush lol. Anyways, you are grossly incorrect regarding them being flashy and not about quality. I can tell you aren’t a technician with some of the comments. You need to tour a few of Snap On’s plants and your “opinion” would change. Yeah Wright makes badass industrial tools. I happen to own some. The fact is some of their stuff, namely the impacts are made beefier for industrial equipment where size is of zero consequence. Sure you can use some of those on cars but you absolutely cannot say Wright impacts are analogous to Snap On or many automotive specific brands. I recall you talking about this, however you kept on about value and quality and danced around the elephant in the room “snap on”. Apples and oranges dude. Nobody will argue the quality for money spent. Hell I own Wright Grip2.0 wrenches and they are about the best made. But certain sockets need automative broaching and super thin walls vs industrial shit you use to work on the old John Deere tractor or CAT excavator.
@johnsoncountytree513110 ай бұрын
I like Wright wrenches but when shopping for a flex head ratchet I didn't like the Wrights. I paid 150 around the time this was made and bought a Snap On long handle flex head. Worth every penny
@johnsoncountytree513110 ай бұрын
I like Snap On Sockets And Wright Wrenches
@johnsoncountytree513110 ай бұрын
These are better than Snap On. I have lots of Wright tools including these wrenches
@gingebrien240811 ай бұрын
Finally have my set on the way. Waited 6 months. But from the reviews and testing video these best out good old snap on. Albeit the Snap on’s are a little longer. And the price difference will break your pocket. 😁
@johnsoncountytree513110 ай бұрын
These are way better than Snap On
@anglegrinder4630 Жыл бұрын
22mm hole saw worked for me,all 6 bushing gets everything out even that hard metal sleeve that was IMPOSSIBLE
@peterchristlieb Жыл бұрын
My Dad had the same Wright round head ratchet, about a 7” handle with what looked like a piece of heater hose over the grip. Always clicked positive and never changed direction when you palmed it, it just fucking worked. We didn’t get carried away with tooth count back then and when we needed something bigger or smaller we reached for the correct drive size. I’m also a huge fan of the Snow Shoe head Proto ratchets, 24 teeth but smooth as glass and close to zero backdrag.
@The_BIG_salad Жыл бұрын
Screwdrivers are one of those tools in which there are literally thousands to choose from but it's weirdly not easy to find one that feels comfortable. Idk if that's just me, or what.
@Bruskoll Жыл бұрын
That is weird why doesn’t the 12 have 2.0 on it
@DSW-kt1fp Жыл бұрын
anything on that regulator yet ?
@TalkinTools Жыл бұрын
I love my Wright 2.0's! solid wrench for the money
@pharmdog1 Жыл бұрын
These wrenches are better than snap on wrenches by far! They are even at a better price too!
@johnsoncountytree513110 ай бұрын
That is exactly what I said! I have the SAE set and far more superior than Snap On.
@Death2Weebs Жыл бұрын
Beautiful chroming. It last forever
@onthepegs Жыл бұрын
Awesome! "official" kawasaki tool is EUR350...
@thatsmydawg Жыл бұрын
Is there special air fittings i need to attach my lines to the quick connect fittings? The ones im using on my other compressor wont work
@SuperProhibited Жыл бұрын
Would you know where the serial number on kobalt 26 gal. quiet tech air compressor are?
@donwolfjr1 Жыл бұрын
Awesome!!! Yes, simular has been done, like for bushings in my car, I've done this before but... it still applies here!!! Thanks for the video!!!
@randomnav Жыл бұрын
First words out of your mouth with the foul language. Bye
@haryetteperez1555 Жыл бұрын
Nice one idea! Amazing..
@nathan3647 Жыл бұрын
Hey just wanted to say i think this was a really great video and well worth it. Thank you so much.. i am in the market for purchase and was just wondering any updates? Any additional pros or cons regarding this unit? For me, I was looking at this unit, and the HF Fortress 27gal high performance, and the HF Fortress 26 ultra quiet version for comparisons. I see that the HF 27gal is in the upwards of 459.00 in my area, the HF 26gal is 299.99, and right now the Kobalt is 339.00. In addition though, the kobalt by default has a 3yr warranty where as the HF has 90 days before spending extra on extended warranty. As for my usage. Im looking to do some paint spraying HLVP for some woodworking. My husky gun advises 27gal minimum 4.5 SCFM at 90psi. Whats your opinion on compressor ? And do you have a link for that air filtration M30 ? All advise is greatly appreciated.
@spawnandbatman6975 Жыл бұрын
Where do you buy your Wright Tools?
@johnsoncountytree513110 ай бұрын
Harry J Epstein in Kansas City or Clark Tool in Kansas City
@spawnandbatman6975 Жыл бұрын
Honestly the best tools in the market and they are hard to find. I want a torque wrench from them and a set of impacts.
@dublelung1 Жыл бұрын
Very nice! I've got to try this on my swing arm bushing that's stuck.
@scottme6615 Жыл бұрын
Nice job tks
@kaseasdasd5053 Жыл бұрын
*Construction seemed sturdier than other units I considered **MyBest.Tools** Noise level was reasonable. Good pressure and cfm capacity for a small reasonably light compressor.*
@aaronc33892 жыл бұрын
Its $379 at lowes. I bought mine for $240 from a friend who had only used it twice so its basically brand new. Still had the plastic cover it came with out of the box.
@shawnmahmoudi87052 жыл бұрын
Dude $$$$ I have to try this.
@cardo11112 жыл бұрын
Good honest review 👍🏽
@slimesspeedshoptv2 жыл бұрын
what size is the socket you used to push the bushing through? I see to clear it on the left its a 7/8th
@enesdnmz2 жыл бұрын
*This does exactly what I was wanting **MyBest.Tools** Price was fantastic, lower than Harbor Freight-and it included hose and attachments, and IT IS MADE IN AMERICA, unlike Harbor Freight*
@DeltaThreeOne2 жыл бұрын
Nice house bro
@taylorrogich92442 жыл бұрын
What is the duty cycle of this compressor? I can’t find it anywhere. How long should you wait between cycling?
@Zyphen4866 Жыл бұрын
I usually feel it, I wanna say 60% any more than 6 minutes every 10 minutes it starts to get hot enough to make a guy worry
@michaeldeel79982 жыл бұрын
I guess you could say the Wright tool is the right tool...ha ha ha . . . , now i have to do the right thing and go get me one..
@Death2Weebs2 жыл бұрын
Nice ratchets. I agree that most Wright ratchets are new old stock. But it speaks to there character
@lukedrifter12 жыл бұрын
Harbor Freight it ain't !
@waelesmair62502 жыл бұрын
Thanks guys, I have no access to my channel anymore. Wish I did, cause it's wild to see how many people have watched these old videos loool
Пікірлер
Your the man! Just the help I needed, thanks for sharing
how come yours set look perfect, received mine new and they all have light scratches. The bigger wrenches open end have like line/scratches or pits in the open end 😒.
did you put the new bushing back in same way you took them out?
I have a press and this still looks like the way to go! Your the man
I had to add a little heat to mine but than again they were in there since 1971 . Great tip !!
Nice trick. Tks
You've saved people lots of time and effort. Thanks!
I sent back a whole set the etching was horrible 😢
They are as tuff as a tank
Have you ever had to replace the capacitor?
this is a great DIY'er tip if you don't have a bushing puller.. thanks for the tip..
You can just come out and say Snap On. Stop beating around the bush lol. Anyways, you are grossly incorrect regarding them being flashy and not about quality. I can tell you aren’t a technician with some of the comments. You need to tour a few of Snap On’s plants and your “opinion” would change. Yeah Wright makes badass industrial tools. I happen to own some. The fact is some of their stuff, namely the impacts are made beefier for industrial equipment where size is of zero consequence. Sure you can use some of those on cars but you absolutely cannot say Wright impacts are analogous to Snap On or many automotive specific brands. I recall you talking about this, however you kept on about value and quality and danced around the elephant in the room “snap on”. Apples and oranges dude. Nobody will argue the quality for money spent. Hell I own Wright Grip2.0 wrenches and they are about the best made. But certain sockets need automative broaching and super thin walls vs industrial shit you use to work on the old John Deere tractor or CAT excavator.
I like Wright wrenches but when shopping for a flex head ratchet I didn't like the Wrights. I paid 150 around the time this was made and bought a Snap On long handle flex head. Worth every penny
I like Snap On Sockets And Wright Wrenches
These are better than Snap On. I have lots of Wright tools including these wrenches
Finally have my set on the way. Waited 6 months. But from the reviews and testing video these best out good old snap on. Albeit the Snap on’s are a little longer. And the price difference will break your pocket. 😁
These are way better than Snap On
22mm hole saw worked for me,all 6 bushing gets everything out even that hard metal sleeve that was IMPOSSIBLE
My Dad had the same Wright round head ratchet, about a 7” handle with what looked like a piece of heater hose over the grip. Always clicked positive and never changed direction when you palmed it, it just fucking worked. We didn’t get carried away with tooth count back then and when we needed something bigger or smaller we reached for the correct drive size. I’m also a huge fan of the Snow Shoe head Proto ratchets, 24 teeth but smooth as glass and close to zero backdrag.
Screwdrivers are one of those tools in which there are literally thousands to choose from but it's weirdly not easy to find one that feels comfortable. Idk if that's just me, or what.
That is weird why doesn’t the 12 have 2.0 on it
anything on that regulator yet ?
I love my Wright 2.0's! solid wrench for the money
These wrenches are better than snap on wrenches by far! They are even at a better price too!
That is exactly what I said! I have the SAE set and far more superior than Snap On.
Beautiful chroming. It last forever
Awesome! "official" kawasaki tool is EUR350...
Is there special air fittings i need to attach my lines to the quick connect fittings? The ones im using on my other compressor wont work
Would you know where the serial number on kobalt 26 gal. quiet tech air compressor are?
Awesome!!! Yes, simular has been done, like for bushings in my car, I've done this before but... it still applies here!!! Thanks for the video!!!
First words out of your mouth with the foul language. Bye
Nice one idea! Amazing..
Hey just wanted to say i think this was a really great video and well worth it. Thank you so much.. i am in the market for purchase and was just wondering any updates? Any additional pros or cons regarding this unit? For me, I was looking at this unit, and the HF Fortress 27gal high performance, and the HF Fortress 26 ultra quiet version for comparisons. I see that the HF 27gal is in the upwards of 459.00 in my area, the HF 26gal is 299.99, and right now the Kobalt is 339.00. In addition though, the kobalt by default has a 3yr warranty where as the HF has 90 days before spending extra on extended warranty. As for my usage. Im looking to do some paint spraying HLVP for some woodworking. My husky gun advises 27gal minimum 4.5 SCFM at 90psi. Whats your opinion on compressor ? And do you have a link for that air filtration M30 ? All advise is greatly appreciated.
Where do you buy your Wright Tools?
Harry J Epstein in Kansas City or Clark Tool in Kansas City
Honestly the best tools in the market and they are hard to find. I want a torque wrench from them and a set of impacts.
Very nice! I've got to try this on my swing arm bushing that's stuck.
Nice job tks
*Construction seemed sturdier than other units I considered **MyBest.Tools** Noise level was reasonable. Good pressure and cfm capacity for a small reasonably light compressor.*
Its $379 at lowes. I bought mine for $240 from a friend who had only used it twice so its basically brand new. Still had the plastic cover it came with out of the box.
Dude $$$$ I have to try this.
Good honest review 👍🏽
what size is the socket you used to push the bushing through? I see to clear it on the left its a 7/8th
*This does exactly what I was wanting **MyBest.Tools** Price was fantastic, lower than Harbor Freight-and it included hose and attachments, and IT IS MADE IN AMERICA, unlike Harbor Freight*
Nice house bro
What is the duty cycle of this compressor? I can’t find it anywhere. How long should you wait between cycling?
I usually feel it, I wanna say 60% any more than 6 minutes every 10 minutes it starts to get hot enough to make a guy worry
I guess you could say the Wright tool is the right tool...ha ha ha . . . , now i have to do the right thing and go get me one..
Nice ratchets. I agree that most Wright ratchets are new old stock. But it speaks to there character
Harbor Freight it ain't !
Thanks guys, I have no access to my channel anymore. Wish I did, cause it's wild to see how many people have watched these old videos loool
Thanks brother from India
Very nicely done. Quick and painless. You da man!
Life saver :"v