OdysseyOverland4x4 is a channel that takes the fear out of DIY repairs and builds to your overland vehicle. Follow the build of our 1992 VW Vanagon Syncro & 1985 Chevrolet K5 Blazer (CUCV M1009) as well as our 4x4 Overland Adventures through the states!
Пікірлер
How many quarts of oil does it turbo 400 takes because I noticed when you put it out no fluid came out
Saved me so much time. I fiddled with it and could not figure it out. Thank you for doing the step by step. 💪
Saved me so much time. I fiddled with it and could not figure it out. Thank you for doing the step by step. 💪
Subscribed
Great video, I'm rehearsing for my own "vent heaven" tear down. I've subbed, I have an '84 C20 and it's been a slow methodical rebirth. Thanks a lot for this!
I'm finished, after the first one, it actually became easier once I knew what to expect. I used a can of silicone, just a bit it really tight spots and that helped a lot. The latches go on today and then all of it goes back into the body of the truck and I do the rest of the rubber around the windows.
Nice rig!
What roof rack do you have?
Wow. A local locksmith was gonna charge me $300 to install this for me. Thank you 🙏
Hey there, is your rig carburated? If so how reliable is it overlanding?
It’s a diesel (6.2L). It’s been plenty reliable! The trouble I had drive train wise was my transmission had to be rebuilt like 4 times (mostly due to the shop being incompetent) I did have an NP208 blow up on me. To some extent it’s the luck of the draw this these things
Everything is awesome but that roof rack dude i can hook you up😅
What kind of rivets and tool did you use? Help pls
Saved me time and money!! Thanks for video
How do you remove the crank from the tail gate
Nice bro ! Good talking points
This is very helpful even compared to beterr rated videos. Allot of the upper rated videos are all pisazz. This video actually showed me the steps
I built my own flips for my 1ton and pull the 9500lb dustless media blasting system and a full pallet of media with no problems. Ord equipment is stout too I’m sure they are being honest too.
All these idiots thinking a candle loosened the nut. 🤣🤣🤣. It’s the heat that broke the rust loose by making the metal expand. If you don’t know this please get some common knowledge.
Sorry but that roof rack is an eye sore and the intro wow really an hour long?
This is the best. I spent over an hour trying to figure this out a couple of weeks ago and couldn’t get it. Finally had time to watch this again and followed step by step. Bingo!
No need to adjust?
What exactly was your issue ? Did transmission not upshift unless accelerating full throttle ?
bro that is a beautiful rack where i can buy one for my Jimmy91 4x4?
nice SUV bro i will try to do the same thing to mine truck
For anyone struggling with this if you look closely his tumbler is gutted. There is a feature on the tumbler that retracts when a key is inserted that allows it to rotate. I had to drill mine out in the end.. the new key wouldn't retract that feature.
Those "shackles" are tie downs and they will pull right off the truck.... and snap off. Get a mount plate and do it correctly. The only reason those are on the truck are to tie it down during transport they are NOT tow shackles and using them like this is dangerous. In fact the mount plate you bought from HF can be trimmed down to mount prperly on the frame AND be hidden behind the bumper... instead of this dangerous nonsense.
i have the same setup on mine and i have a 14k winch and i do hard pulls with it and nothing has ever happened
Changed my vacuum modulator, had the old original style so when I pulled it out ,about a quart od transmission fluid came out . Is that normal? Never seen it before on other videos 😮😮videos .
Same... ever find an answer. I've seen post and they never say anything about a bunch of fluid coming out
With the 6.2L! That is my dream drivetrain I wanna put in my G3500 van! 👍👍
One of the most well done tutorials I’ve seen ! Thanks
My Jeep j10 had this as well.. i was wondering what the heck the transmission was doing with a vacuum line
Awesome video, and awesome 70s watchband as well.
I don’t have a heat gun like shown in the video, what can I use instead?
My dad put a Clark 5 speed transmission behind a 453 Detroit it was I think a 77 banaza,one ton. Everybody ask why it could pull anything and outrun them. He had a two speed rear-end.
Best in depth video I've seen. Includes all necessary steps and no irrelevant steps.
Hey just wondering what roof top rack you have. I have a 1986 Jimmy which is similar and have been looking for one for a bit.
Lose the music.
I'm missing the part you removed. Any idea what it's called and where to get it?
Does your line go straight into your intake with a elbow????
Thanks! Super helpful
Where does the wiring harness to starter attach it is a tube
Are the ones that are riveted in a one or two piece?
Thanks man, it's worked
REAR WINDOW CRANK MISSING LOCK !!!!
Thanks , it worked 😭😭👌👌👌
Great video, ditch the music.
Well black screen can see nothing don’t what wrong with video but it’s black out !
I keyed in on the lock replacement. Your explanation is the best one, by far, that I've seen on YT. The company that I bought my part from told me that I'm on my own as to how it all goes together. Mine did come with 2 springs which tripped me up. One bit of advice, start the roll pin into the hole before you start the assembly, it just makes it much easier to hammer it in. Thank you for the vid!
Where did you get that roof rack?
You forgot to say 87 to 91
If penetrating fluid wont break the bond, what is wax going to do? I'll tell you. Nothing. Skip the wax.
Great camera work.