Working as an arborist. Enjoying about life with family and friends. -------- Arboristin työhön liittyvä. Elämästä nauttiminen perheen ja ystävien kanssa.
Ei lähde pölli heilahtelemaa niin paljo nosturilla nostettaessa.
@matej577510 күн бұрын
The better quality one.
@Arboristfi7 күн бұрын
Not russian one
@aerialrescuesolutions327719 күн бұрын
Excellent work. I really like that pole thing to push the tree as it goes over, very cool.
@Arboristfi19 күн бұрын
Thank you. I like it also. Really handy with trees we have over here. This model is pushing with force 2500 kg. Biggest we have does it 3600 kg. But that one is not usually with, because it is much heavier.
@aerialrescuesolutions327719 күн бұрын
@@Arboristfi What is the tool called, and where did you get it? Or did you make it? I would like one please. Jim, Oregon State, USA
@Arboristfi19 күн бұрын
@@aerialrescuesolutions3277 Hi Jim. It is tree jack. Brand of this one is RH-pusher. Model is nro 4. There is models from 1 to 6. Minimum in my opinion is 4 and 6 is biggest we have, but heavy to have every day use. Nro 4 has 2500 kg (5500 punds) and 6 is 3600 kg (7900 pounds). I have bought these from Uittokalusto, Finland. Another brand which is good is Stalpen 3500 kg (7700 pounds). There is also a lot of crap on market, but these two are for work.
@aerialrescuesolutions327718 күн бұрын
@@Arboristfi Thank you for the information. Jim
@matej577519 күн бұрын
Good job, that stick has some power to it.
@matej577519 күн бұрын
Perkele.
@Arboristfi19 күн бұрын
Thank you. It really has. This is pushing with 2500 kg force.
@Arboristfi19 күн бұрын
@@matej5775 🤣
@ekoprotec184320 күн бұрын
Elegantly 😎
@Arboristfi20 күн бұрын
😊👍
@JanfeyАй бұрын
menikö sinne nukkumaan?
@Arboristfi20 күн бұрын
Se nukahti vähä pidemmäksi aikaa 😐
@muddemondАй бұрын
Where can I find the video of the grinder falling through and the recovery?
@LauriYlimaki2 ай бұрын
Kuumottiko ollenkaan?
@Arboristfi2 ай бұрын
Aina pieni kutka tollasen p...an kans. Ei siitä ihan varmaksi voi sanoo. Sen verran lupasin, että tuvan päälle ei sen anneta mennä. Sinne se olis tykänny.
@anonyymi96952 ай бұрын
Aika hyvin osu
@Arboristfi2 ай бұрын
👍. Tuuria mukana 😉
@TheToolnut3 ай бұрын
👍💪🪓🌲🇫🇮 🇮🇪
@Arboristfi3 ай бұрын
😁💪
@gaylordsuckballs50963 ай бұрын
Yeah its gonna take a while to find a BACK handle electric saw that can out match a razor sharp 261/500i 😆🤘
@Arboristfi3 ай бұрын
That is true. Time for that is not yet.
@MrFerrushA4 ай бұрын
Retriever?
@Arboristfi4 ай бұрын
?
@MrFerrushA4 ай бұрын
New van - new chance to make it better😊
@Arboristfi4 ай бұрын
That is true 😁
@user-yl9he4ex2u5 ай бұрын
😎 cool
@Arboristfi5 ай бұрын
😊🙏
@VETSKI0335 ай бұрын
Happy new year🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
@user-zr9yy7ln6g5 ай бұрын
is 2024 bo
@Arboristfi5 ай бұрын
?
@pasilehtimaki4536 ай бұрын
tien ylitse ammuttiin. ei taida olla ihan laillista
@tarmosavola98686 ай бұрын
Pääkiinni sankari. Yksityinen tie niin hyvin saa ampua ylitte..
@pasilehtimaki4536 ай бұрын
vai että yksityistie...niin kuin ne kaikki muutkin metsäautotiet...@@tarmosavola9868
@Arboristfi5 ай бұрын
Se oli yksityistie. On laillista.
@Fredrik_ST_wagon7 ай бұрын
Niiiice one👌🏻💪🏻
@Arboristfi7 ай бұрын
Thanks bro 😁🙏
@Seppo_raty127 ай бұрын
Tuo 360 kamera on kyllä näppärä
@Arboristfi7 ай бұрын
Niin on. Ei tarvi tietää missä suunnassa tapahtuu.
@user-yn5rg8wg6t7 ай бұрын
Idealny strzał Darz Bór 😊
@Arboristfi6 ай бұрын
Thank you 🙏
@jussi69057 ай бұрын
Hienoa kuvaustekniikkaa
@Arboristfi7 ай бұрын
Tekniikka menny tosiaan eteenpäin. Kuvattu Insta360-kameralla, jolla pystyy jälkeenpäin editoimaan mihin suuntaan ja minkälaisella zoomauksella vain haluaa. Tietysti alkaa olemaan vähän kökköä jo tollasessa tummassa kuusikossa.
@roblescurbappealconcrete7 ай бұрын
What country are you in? Congratulations on a nice cow, lots of organic meat for the family. Nice shot too. Thank you for posting.
@Arboristfi7 ай бұрын
Thank you very much. This is from Finland.
@roblescurbappealconcrete7 ай бұрын
@@Arboristfi thank you. I was going to guess Finland,
@Arboristfi7 ай бұрын
@@roblescurbappealconcrete :)
@user-eh5ks8uz7m7 ай бұрын
No tienen maiz no se pegan un tiro ya saben donde porque no se lo atinan.
@johnrobb94089 ай бұрын
Got one for TR soloing, it's great. A lot of times when beginning to lower it feels sudden. I always use 2 hands, one opening the cam,and a a brake hand on the rope like a normal rapel.
@bocomoto10 ай бұрын
Nice!,..simple-i have wondered (and asked others before,..but-) Why are falling cuts (at base) always down low??,.why can’t the saw do all that work up at let’s say waist height instead of bending over down low????,thanks
@Arboristfi7 ай бұрын
Height doesnt matter that much if you use timber for firewood. Sometimes we make logs and then it matters. If we are using tree jack (rh-pusher or stalpen) and it is pushing tree with example 3500 kg force then it matters also. The higher you make cuts with tree jack, the less power you will have.
@peterbarlow891210 ай бұрын
I stand off 90 degrees from the fall line even with the stump. Make a vertical stick equivalent to the tree. Rotate stick to horizontal and sight through the tip to the proposed fall line. Anything between that point and the stump will be under the felled tree.
@Arboristfi2 ай бұрын
That works also. If you dont have just one place where to fell the tree. Example between 2 buildings.
@peterbarlow89122 ай бұрын
@@Arboristfi boom truck advised for your example.
@Arboristfi2 ай бұрын
@@peterbarlow8912 😁
@harrpohj11 ай бұрын
Good Job👍
@P.E.J. Жыл бұрын
very nice trick 😉
@BMProvenzano Жыл бұрын
Cool.
@metsanpoika675 Жыл бұрын
Miekassa oli suomen Kuva Suomi suiii
@daveoseas Жыл бұрын
Wonderful. Thank you
@verticalfeel Жыл бұрын
I would say... good bye zigzag and others....Its a great device// they told me that with the trango cinch it can do this too/ hugs , great video
@mattukko Жыл бұрын
Komee tuli mutta raot oli kyllä pineet.
@jonashandyman9059 Жыл бұрын
Unos de mis video favoritos 👨🚒
@tavolo22 Жыл бұрын
Will it work for a midget?
@Arboristfi5 ай бұрын
Sure
@timower58506 күн бұрын
You need to measure the height of a midget? There are simpler ways.
@OskariKosonen-dv5fb Жыл бұрын
Onko tuo pienempi Echo 501sx? Ihan mielenkiinnosta, onko mitä kaikkea tehty ku kuulostaa suht kireältä... 🤔😃
@daveglover1553 Жыл бұрын
Nice, me likey✌️ thanks👍
@qza65 Жыл бұрын
Hyvä harraste tuokin. Antaa vähän suuntaa, minkälaisella hammasmuodolla tuo homma voi toimia. Testissä on vaan paljon muuttujia. Jos laittais liimapuupölkyn sahattavaksi ja ketjunopeuden vakioksi. Ketjulle vakio paine sahaukseen vielä, niin jää sahaajasta riippuvat tekijät pois. Klapikoneen sahamoottorin pystyy vakioimaan tuollaiseen helposti. Ketjun teroitus myös samaksi, 4,8 vie vähemmän purua kuin 5,5. Voi olla mahdollinen lopputulos myös se, että ajat ovat hyvin lähellä toisiaan, sekunnin sisällä kaikki testatut. Näin insinöörinä vain tuota testausta pähkäilin.
@Arboristfi Жыл бұрын
Tuosta oksattomasta liimapuupalkista ja muuttujista olikin kommentti videossa. Jos saat aikaiseksi rakentaa tuollaisen testipenkin, niin tullaan kyllä mielellään sahailemaan ;). Siihen asti mennään näillä ;). Muuttujia on aina, mutta koska nyt saatiin kuitenkin keskenään noinkin tarkkoja aikoja, oli testi omasta mielestä ihan onnistunut. 4,8-5,5 mm kommenttia en ihan tajunnut. Niitä 325 ja 3/8 ketjujahan ei keskenään vertailtu. Jos ketjunopeus ja paine vakioidaan, niin ei saada todellista tulosta kuinka ketju toimii moottorisahalla. Sahatessa ketju vaikuttaa nimenomaan kierrosnopeuteen. Kaikki vaikuttaa kaikkeen... Tällaset testit ei koskaan tule olemaan sellasia, että tyydyttää kaikkia. Meille käytännön hommiin silti riittävää ja mielenkiintoista tietoa.
@qza65 Жыл бұрын
@@Arboristfi Jep.Tuo testihän näyttää sen työtilanteen hyvin. Eihän tuosta saa mitenkään täydellistä, kun sahattavaa tavaraa ei helposti saa vakioksi. Tuo ketjukokoero on selkeä. Pienemmän hampaan alla on vähemmän tilaa kuljettaa lastua poispäin. Ketju ja sahaaja vaikuttaa kierrosnopeuteen, sahaaja enemmän. Tänään painan seitsemän kilon voimalla, huomenna vaan kuudella. Tuo ihminen on suurin vaihteleva parametri. Klapikone voisi olla hyvä testipenkki, niissä ketjun pyörityksen saa pidettyä aika tasaisena ja laipankäännön sylinterin painetta on mahdollista seurata. Hyvä tentti tuo oli, kun näytti noiden hampaiden eroja. Mittasitko noiden hampaiden paksuutta leikkauspinnasta. Voisi selittää tuota sihlun hitautta, kun on vähän paksumpi. Kuten tuolla välissä jo oli ihan hyvä testaus, ei tarvitse välttämättä hankkia sitä kalleinta ketjua, jonka kauppias tarjoaa.
@qza65 Жыл бұрын
Tuollaista vastaava kun edellisessä elämässä näytti suoraan tehoista huonon teräpalan. kzread.info/dash/bejne/Y2ull7iafcy2cZM.html. Mazak pieni sorvi numero 630. Tuosta johtuen noiden terien tenttiä mietin.
@christianarcos4333 Жыл бұрын
😅
@ivanavijatov9266 Жыл бұрын
Bravo Mika!!!
@ivanavijatov9266 Жыл бұрын
Bravo, Mika!
@pasilehtimaki453 Жыл бұрын
Tukkivannesahurit ryhmä löytyy Facebookista jos aihe kiinnostaa. Meitä on jo yli 6000 jäsentä siinä
@Arboristfi Жыл бұрын
Juu, itse olen ollu mukana seuraamassa hyviä keskusteluita.
@andrewmcgillivray1881 Жыл бұрын
remember, the main cause of death among beavers is falling trees..
@dertyjerz3 Жыл бұрын
Very cool. Working in the snow sucks but makes for some great footage. Replayed the first top 10x.
@murimurimrui Жыл бұрын
Is this a yearly hunt or is this like a draw system like in North America?
@Arboristfi Жыл бұрын
Every year we hunt with the same group and in same area. Just amount of the moose permissions comes from government.
@mrtreejunkie Жыл бұрын
How much is that Jacket alone man with the saw pants! I do tree work and can't afford any of that & I climb! Living the dream
@kissthesky40 Жыл бұрын
sped up it sounded like there were 100,000 angry hornets in that fallen tree.
@dunnkruger8825 Жыл бұрын
Thanks
@Anders_HeymSR302 жыл бұрын
Affirmative nod! 😁
@Arboristfi2 жыл бұрын
Indeed 😁
@chipper4422 жыл бұрын
:40 someone was just in that tree………scary prospect
@Arboristfi2 жыл бұрын
There was no climbers in that tree. We were using cherry picker to take canopy off.
Пікірлер
Hyvä pätkä. Mitä etua tuosta v sahauksesta on?
Ei lähde pölli heilahtelemaa niin paljo nosturilla nostettaessa.
The better quality one.
Not russian one
Excellent work. I really like that pole thing to push the tree as it goes over, very cool.
Thank you. I like it also. Really handy with trees we have over here. This model is pushing with force 2500 kg. Biggest we have does it 3600 kg. But that one is not usually with, because it is much heavier.
@@Arboristfi What is the tool called, and where did you get it? Or did you make it? I would like one please. Jim, Oregon State, USA
@@aerialrescuesolutions3277 Hi Jim. It is tree jack. Brand of this one is RH-pusher. Model is nro 4. There is models from 1 to 6. Minimum in my opinion is 4 and 6 is biggest we have, but heavy to have every day use. Nro 4 has 2500 kg (5500 punds) and 6 is 3600 kg (7900 pounds). I have bought these from Uittokalusto, Finland. Another brand which is good is Stalpen 3500 kg (7700 pounds). There is also a lot of crap on market, but these two are for work.
@@Arboristfi Thank you for the information. Jim
Good job, that stick has some power to it.
Perkele.
Thank you. It really has. This is pushing with 2500 kg force.
@@matej5775 🤣
Elegantly 😎
😊👍
menikö sinne nukkumaan?
Se nukahti vähä pidemmäksi aikaa 😐
Where can I find the video of the grinder falling through and the recovery?
Kuumottiko ollenkaan?
Aina pieni kutka tollasen p...an kans. Ei siitä ihan varmaksi voi sanoo. Sen verran lupasin, että tuvan päälle ei sen anneta mennä. Sinne se olis tykänny.
Aika hyvin osu
👍. Tuuria mukana 😉
👍💪🪓🌲🇫🇮 🇮🇪
😁💪
Yeah its gonna take a while to find a BACK handle electric saw that can out match a razor sharp 261/500i 😆🤘
That is true. Time for that is not yet.
Retriever?
?
New van - new chance to make it better😊
That is true 😁
😎 cool
😊🙏
Happy new year🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
is 2024 bo
?
tien ylitse ammuttiin. ei taida olla ihan laillista
Pääkiinni sankari. Yksityinen tie niin hyvin saa ampua ylitte..
vai että yksityistie...niin kuin ne kaikki muutkin metsäautotiet...@@tarmosavola9868
Se oli yksityistie. On laillista.
Niiiice one👌🏻💪🏻
Thanks bro 😁🙏
Tuo 360 kamera on kyllä näppärä
Niin on. Ei tarvi tietää missä suunnassa tapahtuu.
Idealny strzał Darz Bór 😊
Thank you 🙏
Hienoa kuvaustekniikkaa
Tekniikka menny tosiaan eteenpäin. Kuvattu Insta360-kameralla, jolla pystyy jälkeenpäin editoimaan mihin suuntaan ja minkälaisella zoomauksella vain haluaa. Tietysti alkaa olemaan vähän kökköä jo tollasessa tummassa kuusikossa.
What country are you in? Congratulations on a nice cow, lots of organic meat for the family. Nice shot too. Thank you for posting.
Thank you very much. This is from Finland.
@@Arboristfi thank you. I was going to guess Finland,
@@roblescurbappealconcrete :)
No tienen maiz no se pegan un tiro ya saben donde porque no se lo atinan.
Got one for TR soloing, it's great. A lot of times when beginning to lower it feels sudden. I always use 2 hands, one opening the cam,and a a brake hand on the rope like a normal rapel.
Nice!,..simple-i have wondered (and asked others before,..but-) Why are falling cuts (at base) always down low??,.why can’t the saw do all that work up at let’s say waist height instead of bending over down low????,thanks
Height doesnt matter that much if you use timber for firewood. Sometimes we make logs and then it matters. If we are using tree jack (rh-pusher or stalpen) and it is pushing tree with example 3500 kg force then it matters also. The higher you make cuts with tree jack, the less power you will have.
I stand off 90 degrees from the fall line even with the stump. Make a vertical stick equivalent to the tree. Rotate stick to horizontal and sight through the tip to the proposed fall line. Anything between that point and the stump will be under the felled tree.
That works also. If you dont have just one place where to fell the tree. Example between 2 buildings.
@@Arboristfi boom truck advised for your example.
@@peterbarlow8912 😁
Good Job👍
very nice trick 😉
Cool.
Miekassa oli suomen Kuva Suomi suiii
Wonderful. Thank you
I would say... good bye zigzag and others....Its a great device// they told me that with the trango cinch it can do this too/ hugs , great video
Komee tuli mutta raot oli kyllä pineet.
Unos de mis video favoritos 👨🚒
Will it work for a midget?
Sure
You need to measure the height of a midget? There are simpler ways.
Onko tuo pienempi Echo 501sx? Ihan mielenkiinnosta, onko mitä kaikkea tehty ku kuulostaa suht kireältä... 🤔😃
Nice, me likey✌️ thanks👍
Hyvä harraste tuokin. Antaa vähän suuntaa, minkälaisella hammasmuodolla tuo homma voi toimia. Testissä on vaan paljon muuttujia. Jos laittais liimapuupölkyn sahattavaksi ja ketjunopeuden vakioksi. Ketjulle vakio paine sahaukseen vielä, niin jää sahaajasta riippuvat tekijät pois. Klapikoneen sahamoottorin pystyy vakioimaan tuollaiseen helposti. Ketjun teroitus myös samaksi, 4,8 vie vähemmän purua kuin 5,5. Voi olla mahdollinen lopputulos myös se, että ajat ovat hyvin lähellä toisiaan, sekunnin sisällä kaikki testatut. Näin insinöörinä vain tuota testausta pähkäilin.
Tuosta oksattomasta liimapuupalkista ja muuttujista olikin kommentti videossa. Jos saat aikaiseksi rakentaa tuollaisen testipenkin, niin tullaan kyllä mielellään sahailemaan ;). Siihen asti mennään näillä ;). Muuttujia on aina, mutta koska nyt saatiin kuitenkin keskenään noinkin tarkkoja aikoja, oli testi omasta mielestä ihan onnistunut. 4,8-5,5 mm kommenttia en ihan tajunnut. Niitä 325 ja 3/8 ketjujahan ei keskenään vertailtu. Jos ketjunopeus ja paine vakioidaan, niin ei saada todellista tulosta kuinka ketju toimii moottorisahalla. Sahatessa ketju vaikuttaa nimenomaan kierrosnopeuteen. Kaikki vaikuttaa kaikkeen... Tällaset testit ei koskaan tule olemaan sellasia, että tyydyttää kaikkia. Meille käytännön hommiin silti riittävää ja mielenkiintoista tietoa.
@@Arboristfi Jep.Tuo testihän näyttää sen työtilanteen hyvin. Eihän tuosta saa mitenkään täydellistä, kun sahattavaa tavaraa ei helposti saa vakioksi. Tuo ketjukokoero on selkeä. Pienemmän hampaan alla on vähemmän tilaa kuljettaa lastua poispäin. Ketju ja sahaaja vaikuttaa kierrosnopeuteen, sahaaja enemmän. Tänään painan seitsemän kilon voimalla, huomenna vaan kuudella. Tuo ihminen on suurin vaihteleva parametri. Klapikone voisi olla hyvä testipenkki, niissä ketjun pyörityksen saa pidettyä aika tasaisena ja laipankäännön sylinterin painetta on mahdollista seurata. Hyvä tentti tuo oli, kun näytti noiden hampaiden eroja. Mittasitko noiden hampaiden paksuutta leikkauspinnasta. Voisi selittää tuota sihlun hitautta, kun on vähän paksumpi. Kuten tuolla välissä jo oli ihan hyvä testaus, ei tarvitse välttämättä hankkia sitä kalleinta ketjua, jonka kauppias tarjoaa.
Tuollaista vastaava kun edellisessä elämässä näytti suoraan tehoista huonon teräpalan. kzread.info/dash/bejne/Y2ull7iafcy2cZM.html. Mazak pieni sorvi numero 630. Tuosta johtuen noiden terien tenttiä mietin.
😅
Bravo Mika!!!
Bravo, Mika!
Tukkivannesahurit ryhmä löytyy Facebookista jos aihe kiinnostaa. Meitä on jo yli 6000 jäsentä siinä
Juu, itse olen ollu mukana seuraamassa hyviä keskusteluita.
remember, the main cause of death among beavers is falling trees..
Very cool. Working in the snow sucks but makes for some great footage. Replayed the first top 10x.
Is this a yearly hunt or is this like a draw system like in North America?
Every year we hunt with the same group and in same area. Just amount of the moose permissions comes from government.
How much is that Jacket alone man with the saw pants! I do tree work and can't afford any of that & I climb! Living the dream
sped up it sounded like there were 100,000 angry hornets in that fallen tree.
Thanks
Affirmative nod! 😁
Indeed 😁
:40 someone was just in that tree………scary prospect
There was no climbers in that tree. We were using cherry picker to take canopy off.