Пікірлер

• 
  @Redneckcountrycowboy493 күн бұрын

  I would like to know if you would ever consider helping someone out that's less fortunate but has pretty much the products he would need to design the same exact desk setup that you made. Only reason I'm asking is because I need all the help I can get to design one just like yours. I'm not good at measuring at all or reading any measuring devices really at all. Have you ever gave it a thought on helping someone that needs some help on building things. If you and your girlfriend would give it a thought and see if you would consider something like this I really appreciate it very much. I have two Stack-On metal reloading benches that I would like to turn into a desk just like yours I think they would work pretty good for this project. But I need some major help redesigning them. I don't have a house or a garage of any kind I live in an apartment and I can't really do projects like this in a apartment I don't have the tours at all either. If you could just give it a thought and let me know if you would be willing to help I know you don't live near where I live but maybe there's a way we can make some arrangements to get it done. Hope to hear from you too soon

• 
  @user-of3wb9sz3x6 күн бұрын

  what kind of wood is that? why aren't you talking about measurements? why aren't you explaining ANYTHING????

• 
  @adelineblackwell33199 күн бұрын

  How much did all the wood cost?

• 
  @jayneal815410 күн бұрын

  you never did an update on this! Would love to see what you put in it and how it works.

• 
  @allye785415 күн бұрын

  Okay someone tell me if im doing this wrong because i am trying so hard but you say you use paper mache with flour glue and water HOW?! because when u add glue it goes all thick and lumpy af im sooo lost D8

• 
  @JustinStanley14 күн бұрын

  Sounds like you need more water, you need it pretty liquefied.

• 
  @allye785414 күн бұрын

  @@JustinStanley Okay thank you its my first tester of doing this lol but i seen you used wood glue see i was using gorilla glue and it was just going all chunky lol also is pancake flour okay to use or not please help D: i wanna do this right

• 
  @tonyd302917 күн бұрын

  And what the mattress being vertical for a long time when not in use?

• 
  @tonyd302917 күн бұрын

  Very nice. Where were the gas pistons used?

• 
  @cynvisionАй бұрын

  Would love to find one of these to buy. I'm currently using a Stanley expanding and rolling toolbox

• 
  @cynvisionАй бұрын

  Maybe the PVC idea is something I can adapt. I do miss having light hanging. I might manage to build a folding top to put on my toolbox upper level with cut out to still reach in top tier...

• 
  @IOSARBXАй бұрын

  Justin Built, Yay! I liked this video so much, it made me smile!

• 
  @karakrantz1391Ай бұрын

  Oh, Congratulations on the new addition to your family!!! Babies are such great ways to start people. :) This was a timely post, I have been thinking about putting in a murphy bet cabinet. thank you so much.

• 
  @JustinStanleyАй бұрын

  Thank you so much!

• 
  @user-ri7ee2dy7yАй бұрын

  What size prop did you use? I am currently building 5 planes for the Boys I work with, I take kids that have gotten into some trouble and some who might be heading into trouble. Your set up seems to be the simplest and easiest to maintain, I have a great bunch of guys and gals and I would love to “ Streamline “ their planes, if you could give some parts and spec I would be very grateful! I thank you and My Guys and Gals also Thank you!

• 
  @jacrispiejackson69Ай бұрын

  They could’ve just turned the engine light off

• 
  @victoriousfoxАй бұрын

  Gmn mau lawan negara lain, lawan OPM aja ga selesai2, gimana mau lawan OPM, lawan parkir liar aja ga beres2.

• 
  @sherralclayton578Ай бұрын

  The purpose of people watching these videos is to get step by step instructions. NOT just see YOU build a fence. This was a WADTE OF MY TIME.

• 
  @patrickploenzke489Ай бұрын

  Do you have plans?

• 
  @thejoesterАй бұрын

  A “how to” video that does NOT SHOW HOW TO. 😂😂😂😂

• 
  @agentofficerthomasa.porter107Ай бұрын

  Great Build Justin. always, Tommy🤠

• 
  @pd_8888Ай бұрын

  One question if I may - how do you secure that the bed frame will not fall? Is there a mechanism that is keeping it upright? What if somebody (like a kid) tries to pull it - will the bed be somehow "locked" in place until we decide to unfold it? Thank you for the feedback.

• 
  @shopdayzon1641Ай бұрын

  Could you provide the project drawing

• 
  @timkinney96902 ай бұрын

  Awsome build. If you are still concerned about drivers behind you, you could install a blue tooth camera above your door.

• 
  @BaljitSingh-xc5sz2 ай бұрын

  Thanks it was helpful

• 
  @johnkim10432 ай бұрын

  Really creative and skilled.

• 
  @handprintlady2 ай бұрын

  Can you PLEASE link the SMALL pocket hole jig you are actually USING??

• 
  @aladrasullivan90182 ай бұрын

  Hobbit height 🤷‍♂️

• 
  @robbrown64952 ай бұрын

  I generally make it a rule never to take advice from someone who wear a cap backwards but I watched the video and have to say I was impressed. I'm looking for a solution for my daughters studio and I like this build.

• 
  @isaneterrier66782 ай бұрын

  Hy, very beautiful job.

• 
  @mpd04523 ай бұрын

  Awesome job on the bed! The FT Guinea in the back is what’s up!!

• 
  @tluva10203 ай бұрын

  2020 goodwill mirror $6 2024 goodwill mirror $66

• 
  @zappa41533 ай бұрын

  Very nice I like it a lot, however I would have put the draws on the bottom for better access and the stove up the top because you will less likely to be putting the stove in and out all the time.

• 
  @tarikfadly87493 ай бұрын

  is this a parody? The CEL needs reset with the same scanner that gave you the code. - You can easily crack your housing and destroy your engine simply by over tightening the sensor - also, needs checked for leaks after install. wtf

• 
  @user-go1cs1id5t3 ай бұрын

  Cool video. One day I'll have some tools that cut things. In the meantime, I feel confident enough to know what's supposed to happen when I hire someone to do this very thing. LOL.

• 
  @jonathanesquives4 ай бұрын

  Where's the How?…no instructions at all during video?

• 
  @RonaldDCass4 ай бұрын

  1971 we had a VW bus. I built a camp cook box that was almost as wide & tall as the rear opening. We used it for many years & donated it to our friends when we moved. They continued to use it for decades. It was super to tent camp & have a kitchen wherever we went. We now have used a class A motorhome for the past decade or so, but hard to beat the setup we had then.

• 
  @fly249g4 ай бұрын

  Add FPV

• 
  @anthonyseiler96364 ай бұрын

  This is going to be a weird question on this quite old video, but do you know what model this sink is? We have the same sink amd itnhas started to crack (i found your video by searching with google lens). I'd love to try and find an exact replacement so i dont have to recut the granite countertop. Ours is undermounted. Thanks!!

• 
  @stephanefraga25994 ай бұрын

  How often should I oil my wood countertop?

• 
  @kashmclain25814 ай бұрын

  Looks great but for educational purposes such as someone watching the video to see how to do certain things that they may not know how to do such as line up the framing on both sides or something. You should record every little detail of every process to be more thorough . That way whatever content somebody's watching for is included

• 
  @dreadfulonmonday4 ай бұрын

  Your whole head shrunk. 😮

• 
  @HouseofHammersLLC4 ай бұрын

  Nice job! I kind of cringed when u out down masking tape before using the router, but then noticed you switched to painters tape. Wondering if you had issues when pulling off regular masking tape or was the stain able to resist the glue adhesive. No diss, just curious. Again, door came out great

• 
  @craig122725 ай бұрын

  Love the boat swivel idea did you not use pistons or hot from Amazon it’s kinda pricey.

• 
  @demiancarras69385 ай бұрын

  😂😂😂😂😂👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👌👌👌👌👌👌👌👌👌👏👏🇨🇱

• 
  @vixxnmusicofficial5 ай бұрын

  Nice job. I’m curious what you eat in a day!? Keep it going

• 
  @olemo7035 ай бұрын

  Good job, the bed is a Full size, the correct size for guests, I would like to do it but I don't have your experience, what would be the measurements of the bed? Is there a plan with the cuts, if you have them, could you publish them? Thank you.

• 
  @ArturoMontor-dz5nf5 ай бұрын

  Nice job boss man

• 
  @caeciliusmetellus30386 ай бұрын

  very nice we all beg for plans 😁😁

• 
  @mamamacgyver54016 ай бұрын

  Do you happen to have a cut list for this chick box? It’s absolutely perfect.

• 
  @user-pp1cx1qq6c6 ай бұрын

  6:17 best part of the entire video!!!

• 
  @ethancruz28216 ай бұрын

  Does this make it easier to prime?

• 
  @glasshammer2916 ай бұрын

  Did you have kids yet?

• 
  @tuckerandi6 ай бұрын

  Looking to build something similar to this have subscribed to check for ideas