Пікірлер

• 
  @kevinkeller6512Сағат бұрын

  I didn’t see anything about the thread tension; can you please explain if you use certain setting and also for the stitch length. Thank you I enjoyed it

• 
  @stephenburton97662 күн бұрын

  Having filled my bobbin with new thread, I cannot lift it off. Can you help me find a solution?

• 
  @EmeliaPieterse10 күн бұрын

  How much does this machine cost

• 
  @franknuttsewingmachines79418 күн бұрын

  Hi! This machine is available from our website for £449 🙂

• 
  @letelilyfantfant459011 күн бұрын

  Can this machine sew straight through five levels of fabric when two of them are folded, like when i make patchwork? I bought a Brother fs60x last year that sews clothes just great. But when i try to sew patchwork it takes one little stitch-width to the side over the humps where the seams meet. The humps have been ironed and pressed beforehand. It`s only about one millimetre of difference, but this is enough to disrupt the patchwork pattern when i sew blankets and i end up with folds when i quilt. When i spend 50-60 hours on making something; i want a perfect result. The fs60x, which in other things i mostly love, did NOT. Can the Innov-is A16 do the job?

• 
  @tristanstephens332212 күн бұрын

  Could you use this for Sashiko Boro ?

• 
  @jessicapp17 күн бұрын

  The best video I have seen on unloading and describing everything… Thank you so much….❤❤❤🎉😊

• 
  @annanixon357823 күн бұрын

  I just bought a slightly older version of this second hand and this helped me a lot! The original instruction booklet was a little confusing. Thank you so much!❤

• 
  @randykoger464626 күн бұрын

  Lovely shop and I’m getting very strong Acorn Antiques vibes.

• 
  @paigeturner165Ай бұрын

  I’m so torn between 725 and 423 and I wish I could get some good advice. Some folk say top loader is more reliable and others say side loader gives better stitching…. Help?! Also I think I want sturdy so is 423 better because of full metal body? I’m used to vertical thread holder. Helpppppppp 😅

• 
  @catherinenganga6019Ай бұрын

  Thank you dear. Well explained.

• 
  @MichaelFlynn0Ай бұрын

  topz

• 
  @patriciaspates4663Ай бұрын

  I just purchased a new/previously owned but never once used xp1 (eBay!) Thank you for sharing! This is the very first video I’ve watched since receiving my machine earlier today. Very informative and helpful. I look forward to watching your next ones. I’ve only used the xp3 in a quilting class at our local shop but this was the best deal I could find and I plan to buy the upgrades.

• 
  @linzjan4276Ай бұрын

  You haven’t shown which way the cotton should come off the reel.

• 
  @mjremy2605Ай бұрын

  That was a perfect demo! Soothing voice, no music, well explained, covered all the basic. Very nice. Thank you, Clare. Now I know. Love your Bernina!

• 
  @yaowamarnjunlapun5514Ай бұрын

  Hi I just got PR 670 and watched the lovely video setting up thread on the (which)needle. I noticed that there is one needle that wasn’t set up. As I tried to set up mine I can set up only 5 not six is that the case.

• 
  @autumnpolk6348Ай бұрын

  I’ve tried this and I keep having issues with nesting…I’m not sure if I’m going too fast or too slow or if my tension is off…gotta keep troubleshooting cause ya girl can’t afford an embroidery machine! 😅

• 
  @beccssmith62852 ай бұрын

  Fabulous tutorial. Thanks

• 
  @Beatriz-cl8vg2 ай бұрын

  Buenas ¿Qué diferencia hay entre la 2200 y la 2300? Muchas gracias

• 
  @theresaauguste49102 ай бұрын

  Preparing for free motion embroidery

• 
  @contactleroux18202 ай бұрын

  Je ne réussissais pas à comprendre mon problème car mes points étaient trop lâches . Grâce à vous, j’ai réussi. Un grand merci 🙏

• 
  @t.ch.p93272 ай бұрын

  I really love how this lady speaks.. the voice, the accent.. how s is sound

• 
  @Elaine-yk5uh2 ай бұрын

  Hi, love all your videos the're so in formative, they have really helped me get started on my new machine. I have the same innov-is F420 as in your vid. But I have a problem I'm hoping you can help with. My back tacks from the bobbin thread all seem to look so tangled, the underneath just looks like a mess of bunched up tangled thread, that's sewn down. Is there something I'm doing or can do to sort it out so it looks neat,and not tangled. Thank you. Elaine. x

• 
  @Richardjaymz2 ай бұрын

  At the price of a car lol

• 
  @emcbabe2 ай бұрын

  Beautifully clear video. My 2010 is my go-to; I've never heard b4 of a 2200 Mini. I bought a Juki because I'd seen an online quilting mentor at work. The second, and even more important reason for my purchase is that the TL Jukis come with a scant quarter foot. In my extensive search for a machine with such a foot, I found that only the Juki comes with one - no fussing with a computer guided needle position that cannot get your needle position right where you need it to go. The 2010 does not come with other feet, so I have bought the regular quarter inch but and I bought the wonderful 1/8 inch foot, which is a work of art. Thank you for a great and instructive video

• 
  @user-zf1fb3gf3k2 ай бұрын

  Bonjour ou trouver une cle usb avec motif intégré jai la meme machine que vous merci a vous

• 
  @elainevenier16243 ай бұрын

  Thank you, Claire, exactly the instruction I needed, and I'm going to start right now!

• 
  @luisjochoa3 ай бұрын

  Coming from the "rest of the world", I stop watching when they don't use centimeterts !!!!

• 
  @jennilynbatis70754 ай бұрын

  Bakit tumitigil ang tahi

• 
  @susanmagner35814 ай бұрын

  Does the needle and machine get sticky

• 
  @user-ov3gh9nl8t4 ай бұрын

  How much this

• 
  @jordandavies64184 ай бұрын

  Odd question, can you use stabiliser only if you want an embroidery design that's see through? Or does it require a a material to work?

• 
  @barbmartin41764 ай бұрын

  I'm new and she goes too fast for me.

• 
  @dianneunderwood84564 ай бұрын

  Very informational and enjoyable to watch. Have not done hoop embroidery on my sewing machine and wondered how one would do it. When you had trouble getting your hoop under your foot, I realized the same would happen with me. Would it work to position the hoop under the needle before putting on the new foot (and while the other foot was already off)? Thanks for a well presented video!

• 
  @nickynonque54824 ай бұрын

  Thank you so much for this - have been sat getting very frustrated by wasting time on other useless videos and yours was perfect!!! 🤩 🫶 Quick question, if I may 😊 I have Brother 380D, and only 5 or so automatic embroidery patterns are marked for being ok for water soluble stabilser… the majority of the rest look pretty much chunky enough around the edges and fillings etc to be able to be held together enough -would they work and it’s just Brother being overly cautious? 🤭 Anyway, having watched your video, I now see that the world is my oyster! 😁 Thanks tons from a Brit who’s been living in France for so many years, that it was warming to hear your accent, as the majority of my crowd are French 😂❤

• 
  @Fattiapples4 ай бұрын

  not sure if i should get this model or the 114

• 
  @KevSwan4 ай бұрын

  I'm looking to start my embroidery business, Is there any other machines that you would reccomend for a small start up? Might be a tad above my budget :p

• 
  @cinziamus18744 ай бұрын

  Hello I have this machine and have been using for the last couple of month. However Ive been having a bit of trouble lately where there is a bit of nesting at the start of a straight stitch from the underside of the fabric. I tried to change the tension, clean the bobbin but the issue still persists. Anyone has any recommendations please ?

• 
  @helensalas70934 ай бұрын

  Pero muchas gracias es mi máquina favorita

• 
  @helensalas70934 ай бұрын

  Me gustaría más videos con subtitulos

• 
  @CharleneTaylor-kz8lz5 ай бұрын

  Hi my name is Charlene to

• 
  @deannag81585 ай бұрын

  It would be a good video if it was focused in on the “most important part” of the threading, as you called it.

• 
  @healingwithshania5 ай бұрын

  I agree with the current comments and look forward to more demonstrations

• 
  @FoxySparkles5 ай бұрын

  Great video, Miss Claire. What would you suggest for the "thick thread" as far as they type and size, I have a lot of yards and embroidery floss, but I don't know if they may be "too thick" for this method? Many thanks! kzread.info/dron/1v-pVQyO7l0v80c73pc6Cw.html

• 
  @brigittamatis98275 ай бұрын

  Very useful video. Thank you 👏. Did I understand well that bernina 475 is the first model that has automatic cutter?

• 
  @ponuyyq12425 ай бұрын

  how it even looks beautiful as a practice. thank you ladies! salute from Seoul

• 
  @Lisanah35 ай бұрын

  As others have said, you are a great teacher Clare. It actually feels as though you’re just talking to me, anticipating what I’m thinking, and answering it. Thank you so much. I’m actually really looking forward to getting out my sewing machine. 🙏

• 
  @marilyncoram26655 ай бұрын

  Thanks for the intro. I’d like to see how to design a simple pattern on the laptop and use the memory stick to transfer it to the machine please. Thankyou

• 
  @isaiah45.35 ай бұрын

  Great review, thank you. Are the bobbins for the TL-2200QVP Mini the standard size, or larger, please?

• 
  @ro88o000o5 ай бұрын

  That was so good! I love your videos I wish I could come on your course but Im in Sydney

• 
  @shakilahussain91736 ай бұрын

  Hi do you do payment plans thanks

• 
  @traceymcintyre6265Ай бұрын

  Yes, they do it's on their website.