this channel is dedicated to my lure building and fishing stuff, i hope people that check out these baits i've made will get inspired in there own lures.
I am re watching this epic video. Canot believe that 6 years went by. I am following you for more than than 8 years. IMPRESSIVE. Love your work and I learned a LOT from you. THANKS
@SolarfallBaits13 сағат бұрын
@@MarcosMVlures thank you for the continuous support thru out the years Marcos
@DonnieLuve15 сағат бұрын
btw, my friend, do you have a trashed laser printer in your stash? maybe the silicon heat resistan roll can help you in substitution of the sponge, cheers!
@SolarfallBaits15 сағат бұрын
@@DonnieLuve i dont have a printer of any kind
@DonnieLuve15 сағат бұрын
wow, toutght i was the only one using legos to do resine's contention walls =P
@kirkallen1246Күн бұрын
What a work of art, really beautiful. New Sub.
@boognish.Күн бұрын
A dead chicken 😂
@nolanpeter2748Күн бұрын
I applaud your patience and skills.
@raygann65632 күн бұрын
You need to learn how to use a Table Saw the way you did. It was very dangerous.
@SolarfallBaits2 күн бұрын
Its a work in progress like everything in life.
@ClaytonDarwin2 күн бұрын
Half the reason I have watched all these years is because I find your narration so relaxing. Always glad to see you've posted something new.
@SolarfallBaits2 күн бұрын
Thanks for watching Clayton
@alexandreespindulaferreira32982 күн бұрын
O importante foi o resultado final,ficou bom demais,espero ver em breve,usar nas suas iscas 👏🏽👏🏽👏🏽👏🏽👏🏽
@kestutispauksta722 күн бұрын
¡Gracias!
@SolarfallBaits2 күн бұрын
thanks for watching and supporting the channel
@BrunoGuiard2 күн бұрын
Why do you use epoxy resin and not UV resin to seal the lure ?
@SolarfallBaits2 күн бұрын
UV resin is not made to be used with fishing lures. True coat epoxy is. thats basically why
@magcolor3 күн бұрын
👍👍👍👍👍
@earnestbass12323 күн бұрын
Wouldn’t the foil pattern be smoothed out some when putting it on the bait. I mean when you are pushing it down to make sure it has good contact with the adhesive. I put the foil on the bait then roll it with a pattern works good ,but then my baits aren’t up to the standard of your baits.
@SolarfallBaits3 күн бұрын
@@earnestbass1232 you shall see on the next episode.
@gionatafurini6903 күн бұрын
congratulations, a true artist! What wood would you recommend? Thanks
@ChipEstrada3 күн бұрын
More crafting tips, stack the clay higher than the Legos. then make a cutter with a hacksaw. Get an electric guitar string like the B string, second from the bottom. Use the guitar string in place of the blade and cut excess clay off. Keep up the good work.
@ukkonen833 күн бұрын
pystytkö kertomaan tuon mold clayn nimen tai laittamaan linkkiä mistä se on homattu?
@SolarfallBaits3 күн бұрын
@@ukkonen83 tämän nimistä tavaraa mie käytän chavant.com/le-beau-touche-1
@ChipEstrada3 күн бұрын
Never leave the piece unsupported between the saw and the fence for safety and reduce friction and heat on the blade. Always push the piece all the way through.and make different push sticks for making thinner cuts. Make and use a cross cut sled to make small cuts instead of a miter saw. You are doing a great job! Ive been using tablesaws and doing fine woodworking since the 1970's.
@SolarfallBaits3 күн бұрын
@@ChipEstrada i agree.
@RyanMclain3 күн бұрын
Ahh good. Been waiting. I guessed rather wrongly too it seems. Oh well, nothing new; 'suppose.
@mattietiger29595 күн бұрын
Amazing work of art; as usual !
@SolarfallBaits5 күн бұрын
Thank you! Cheers!
@mattietiger29596 күн бұрын
No weight?
@SolarfallBaits5 күн бұрын
There is weight in just didn’t show that part
@PaulFCalder13 күн бұрын
Can't pour led into a lure because it's dangerous, but can drill holes in it while holding it.
@SolarfallBaits13 күн бұрын
We all have our lure making strengths. Mine is holding small baits while drilling holes into them.
@curdneve364419 күн бұрын
Dear, what is the thickness of that bait? Thanks
@SolarfallBaits17 күн бұрын
Sorry but i cant recall that the thickness was
@juancarlosnadermora71619 күн бұрын
Woudn’t be easier to install the weigth along with the wife during the two pieces process?
@SolarfallBaits19 күн бұрын
@@juancarlosnadermora716 sure you could do that. I’m not sure if it would be easier per se
@robkoons189121 күн бұрын
Wow. Just started really getting into lure making and you are by far the best. Your lures are true pieces of fine art that actually work in real life!
@SolarfallBaits20 күн бұрын
@@robkoons1891 thank you. I appreciate the kind words, there are plenty more youtubers that make pretty nice stuff too.
@robkoons189121 күн бұрын
Wow. I love this design. So realistic with the colors.
@st.lawrencemuskyshop28522 күн бұрын
Awesome video I learned a lot!
@SolarfallBaits22 күн бұрын
@@st.lawrencemuskyshop285 thanks for checking out the video
@ssidskiy26 күн бұрын
Отличная работа
@user-ii4tf8oy9gАй бұрын
The master baiter!
@punci22Ай бұрын
I already see it casting too far, getting snagged in some bushes and that was it. lol
@kemalserter4136Ай бұрын
Dizayn ve pul deseninde el yapımı olarak 1 numarasın dostum. Seni örnek alıyorum bende.Ellerine sağlık harika olmuş.👏👏👏👏
@colebradley2724Ай бұрын
What clear coat do you use
@matthewferguson2515Ай бұрын
Absolute wonderful job.
@SolarfallBaitsАй бұрын
thank you Matthew
@Pandemicrs2Ай бұрын
Can you please tell me proportion how much grams of Titanium Deoxide to mix on how much liters or Laquer?
@SolarfallBaitsАй бұрын
A tea spoon worth of titanium white will make a liter of lacquer pretty opaque so you wont need alot
@Pandemicrs2Ай бұрын
@@SolarfallBaits Thanks mate for answer! What are your thoghts about Abachi wood for glidebaits?
@dendaerbushiАй бұрын
True art! Your videos are always a joy to watch and very inspirational. Thank you!
@SolarfallBaitsАй бұрын
Hey thanks for watching and thanks for the kind words, I appreciate it.
@canadianian2282Ай бұрын
Fantastic! I like the pink, it works.
@piololnepiololne4157Ай бұрын
long and meticulous work with an excellent result, I would always keep my mask and fins ready in case of stranding! 😅👍👍👍
@m.o.s6275Ай бұрын
I like that movements 🤞
@SolarfallBaitsАй бұрын
Thanks, i dig it too
@m.o.s6275Ай бұрын
@@SolarfallBaits you have planted seed in my brain... I want make my own lures to and i have made 1 1/2 half and soon maybe 2 1/2 😅 This lure looks 2 good 👍
@SolarfallBaitsАй бұрын
@@m.o.s6275 great, go for it 😀
@ianmooonАй бұрын
J'ai apprécié mon café du matin devant la conception de ce chef-d'œuvre, rare sont ceux aussi pointilleux dans les détails, au point de sculpter les ecailles ainsi. Si on m'offrait ce leurre, je serais tellement partagé entre le plaisir de pouvoir prendre un poisson avec, et la peur de le perdre dans le fond de l'eau, donc je pense que je ne pêcherais pas avec.. vous pouvez être fier de votre travail ! Bravo l'artiste ! 👏
@tmetz44Ай бұрын
Osp makes a lure called the bent minnow which is very similar
Пікірлер
I am re watching this epic video. Canot believe that 6 years went by. I am following you for more than than 8 years. IMPRESSIVE. Love your work and I learned a LOT from you. THANKS
@@MarcosMVlures thank you for the continuous support thru out the years Marcos
btw, my friend, do you have a trashed laser printer in your stash? maybe the silicon heat resistan roll can help you in substitution of the sponge, cheers!
@@DonnieLuve i dont have a printer of any kind
wow, toutght i was the only one using legos to do resine's contention walls =P
What a work of art, really beautiful. New Sub.
A dead chicken 😂
I applaud your patience and skills.
You need to learn how to use a Table Saw the way you did. It was very dangerous.
Its a work in progress like everything in life.
Half the reason I have watched all these years is because I find your narration so relaxing. Always glad to see you've posted something new.
Thanks for watching Clayton
O importante foi o resultado final,ficou bom demais,espero ver em breve,usar nas suas iscas 👏🏽👏🏽👏🏽👏🏽👏🏽
¡Gracias!
thanks for watching and supporting the channel
Why do you use epoxy resin and not UV resin to seal the lure ?
UV resin is not made to be used with fishing lures. True coat epoxy is. thats basically why
👍👍👍👍👍
Wouldn’t the foil pattern be smoothed out some when putting it on the bait. I mean when you are pushing it down to make sure it has good contact with the adhesive. I put the foil on the bait then roll it with a pattern works good ,but then my baits aren’t up to the standard of your baits.
@@earnestbass1232 you shall see on the next episode.
congratulations, a true artist! What wood would you recommend? Thanks
More crafting tips, stack the clay higher than the Legos. then make a cutter with a hacksaw. Get an electric guitar string like the B string, second from the bottom. Use the guitar string in place of the blade and cut excess clay off. Keep up the good work.
pystytkö kertomaan tuon mold clayn nimen tai laittamaan linkkiä mistä se on homattu?
@@ukkonen83 tämän nimistä tavaraa mie käytän chavant.com/le-beau-touche-1
Never leave the piece unsupported between the saw and the fence for safety and reduce friction and heat on the blade. Always push the piece all the way through.and make different push sticks for making thinner cuts. Make and use a cross cut sled to make small cuts instead of a miter saw. You are doing a great job! Ive been using tablesaws and doing fine woodworking since the 1970's.
@@ChipEstrada i agree.
Ahh good. Been waiting. I guessed rather wrongly too it seems. Oh well, nothing new; 'suppose.
Amazing work of art; as usual !
Thank you! Cheers!
No weight?
There is weight in just didn’t show that part
Can't pour led into a lure because it's dangerous, but can drill holes in it while holding it.
We all have our lure making strengths. Mine is holding small baits while drilling holes into them.
Dear, what is the thickness of that bait? Thanks
Sorry but i cant recall that the thickness was
Woudn’t be easier to install the weigth along with the wife during the two pieces process?
@@juancarlosnadermora716 sure you could do that. I’m not sure if it would be easier per se
Wow. Just started really getting into lure making and you are by far the best. Your lures are true pieces of fine art that actually work in real life!
@@robkoons1891 thank you. I appreciate the kind words, there are plenty more youtubers that make pretty nice stuff too.
Wow. I love this design. So realistic with the colors.
Awesome video I learned a lot!
@@st.lawrencemuskyshop285 thanks for checking out the video
Отличная работа
The master baiter!
I already see it casting too far, getting snagged in some bushes and that was it. lol
Dizayn ve pul deseninde el yapımı olarak 1 numarasın dostum. Seni örnek alıyorum bende.Ellerine sağlık harika olmuş.👏👏👏👏
What clear coat do you use
Absolute wonderful job.
thank you Matthew
Can you please tell me proportion how much grams of Titanium Deoxide to mix on how much liters or Laquer?
A tea spoon worth of titanium white will make a liter of lacquer pretty opaque so you wont need alot
@@SolarfallBaits Thanks mate for answer! What are your thoghts about Abachi wood for glidebaits?
True art! Your videos are always a joy to watch and very inspirational. Thank you!
Hey thanks for watching and thanks for the kind words, I appreciate it.
Fantastic! I like the pink, it works.
long and meticulous work with an excellent result, I would always keep my mask and fins ready in case of stranding! 😅👍👍👍
I like that movements 🤞
Thanks, i dig it too
@@SolarfallBaits you have planted seed in my brain... I want make my own lures to and i have made 1 1/2 half and soon maybe 2 1/2 😅 This lure looks 2 good 👍
@@m.o.s6275 great, go for it 😀
J'ai apprécié mon café du matin devant la conception de ce chef-d'œuvre, rare sont ceux aussi pointilleux dans les détails, au point de sculpter les ecailles ainsi. Si on m'offrait ce leurre, je serais tellement partagé entre le plaisir de pouvoir prendre un poisson avec, et la peur de le perdre dans le fond de l'eau, donc je pense que je ne pêcherais pas avec.. vous pouvez être fier de votre travail ! Bravo l'artiste ! 👏
Osp makes a lure called the bent minnow which is very similar
I really enjoyed the story along with the build
Thanks Matt
Thank you for sharing!
Beautiful
Good work!
Thank you