Пікірлер

• 
  @allnoyz141412 күн бұрын

  Damn... fighting for every millimeter.

• 
  @DaishonBeckins29 күн бұрын

  Not everyone has a welder. I have an easier way a long chisel & large hammer few whacks she'll come out

• 
  @arveljohnson2770Ай бұрын

  What are the special pliers called?

• 
  @makeitwork2650Ай бұрын

  Lock ring pliers.

• 
  @makeitwork2650Ай бұрын

  Lock ring pliers

• 
  @silviosestak2048Ай бұрын

  Its now good? Fix?

• 
  @makeitwork2650Ай бұрын

  Is good. Need a little time to hear what the machine is saying

• 
  @silviosestak2048Ай бұрын

  @@makeitwork2650 on my equinox 900 iron ton cracking not clear ton

• 
  @danygarage8805Ай бұрын

  Where can i get that bolt ?

• 
  @makeitwork2650Ай бұрын

  E bay

• 
  @richperkins51922 ай бұрын

  Badass. Thanks brother

• 
  @makeitwork26502 ай бұрын

  No problem 👍

• 
  @DarwinGmr-gz4tp2 ай бұрын

  Y si uno no tiene esa erramients con que se puede dar ayuda para sacar

• 
  @dylanwaller68423 ай бұрын

  Is the primary clutch bolt normal thread or reverse threaded?

• 
  @wallyyuriy8912Ай бұрын

  Just did my 2016 450 can am. The bolt head will show an arrow if it’s left hand thread.

• 
  @markmcnabb96303 ай бұрын

  Do you have a link for the tool by chance??

• 
  @markmcnabb96303 ай бұрын

  Also did you buy a gasket and if so do you have the link for it as well?

• 
  @hunterslifestyle6253 ай бұрын

  Built one this weekend and two pops she was out

• 
  @bobthebuilder94162 ай бұрын

  How bro

• 
  @hunterslifestyle6252 ай бұрын

  @@bobthebuilder9416 how did I build it ?

• 
  @bobthebuilder94162 ай бұрын

  @@hunterslifestyle625 i found some screws ons on Amazon thank u

• 
  @Dig_it_1234 ай бұрын

  Just got the 900 and was wondering why my Legend blows it out of the water TY for that video first one i seen about the issue...

• 
  @happyviking88885 ай бұрын

  how do you manage to get that much rust im an area where its suppose to be greased up? was your wheels able to turn?

• 
  @user-dw2eo6jt4v5 ай бұрын

  Glad my canAm was easy

• 
  @jacehirst32995 ай бұрын

  Thank you 🙏🏻 only video we could find

• 
  @makeitwork26505 ай бұрын

  Glad it helped

• 
  @762GhosT06 ай бұрын

  Is that a clutch puller you used?

• 
  @makeitwork26506 ай бұрын

  No that’s not for the clutch. i’m pulling the secondary pulley off it was rusty. They generally slide off by hand.

• 
  @762GhosT06 ай бұрын

  @@makeitwork2650 cool thanks a lot for the info! gonna pull my secondary off this week because my sportsman is creeping when In gear and was not sure if I needed a clutch puller for the secondary

• 
  @naturosaur6 ай бұрын

  Fucking hate this machine!!! Fuck you Minelab!

• 
  @mccarterjg6 ай бұрын

  m50 x 1.5

• 
  @mccarterjg6 ай бұрын

  now do you remember how you made that socket?

• 
  @mccarterjg6 ай бұрын

  guessing used water pump shaft

• 
  @mccarterjg6 ай бұрын

  i hat a 600 mile ls engine like that they said to send it on out, cam gear sheared and caused the ticket

• 
  @450outtygang6 ай бұрын

  Where’s the spring for the primary

• 
  @FlipTheBacon7 ай бұрын

  I have upgraded to a Equinox 700 and a buddy of mine had his equinox 800 break and he gave me his 6 inch from it. I been able to dig up some pretty deep targets so far.

• 
  @jamesrivers68537 ай бұрын

  Oh boy I’ve been there about 1 million times with Polaris and stuck CV axles

• 
  @robertpetterson65528 ай бұрын

  Thanks for your video! Have you any update on this? Mine does the same thing. Fe on minimum or maximum does not change anything for me on air test or in-ground test. Is it the machine or the coil? Have you contacted Minelab?

• 
  @JasonGoddard-yy8pk8 ай бұрын

  Do you have the whole video??

• 
  @ccarr6568 ай бұрын

  Thank you!

• 
  @iori19878 ай бұрын

  Donde podre conseguir el reten primario del clutch para una can am 450 2015

• 
  @carolrice20639 ай бұрын

  Looks like you're using the Full Sensitivity and getting ground Feedback from the detector and I have just recently got the X-Terra Pro and the Equinox 600 and also a First Minelab owner and I don't have the Detector's on the Full Sensitivity without expecting the ground Feedback and the Jumpy VDI and I started with 12 Sensitivity and worked my way up to get a better idea of what it was trying to tell me what the target is and I'm at 18 Sensitivity Now and like you when you get a Jumpy VDI it's going to be a Junk Target, but just lower it down just below the Full Sensitivity Mark and I'm not sure what it is on your detector but on the X-Terra Pro it's 20 and 😲 WoW it is a totally different Detector than the All the Time being jumpy VDI and Not locking to Any kind of Numbers but just lower the Sensitivity down and I found a target that was in the 6 inch range and I have lowered the Sensitivity down until I lost the target and then I raised it up until I found it again and it was At 12 Sensitivity and I have worked my way back up and I can really tell when I get a Junk Target And I don't need to be able to Dig a hole to China Anyway and the Full Sensitivity without any kind of ground Feedback.....

• 
  @LongIslandsHardcoreDetectorist9 ай бұрын

  Interesting method, I will give it a try. Thanks 👍🏼

• 
  @johndoee38509 ай бұрын

  Thanks 😊

• 
  @markridings92099 ай бұрын

  I've got the 700 and set my fe of 1 and have no problems

• 
  @matt19731009 ай бұрын

  No-fake. It would pull the cv joint apart at the boot.

• 
  @makeitwork26509 ай бұрын

  Some times it will. But not all the time. I’ve pulled the boot apart by hand before. when that happens, you have to go to another resource for method.

• 
  @frankg57142 ай бұрын

  1st thing that came to mind..lol

• 
  @grandmakellymcdonald10 ай бұрын

  Let’s go let’s go treasure and adventure 💕🌺✌️👵

• 
  @paul7796610 ай бұрын

  Is that a 36mm thread ?

• 
  @Isosceles37110 ай бұрын

  Gotta push Ian. Got it👍

• 
  @BuildBreakFix10 ай бұрын

  Da...😂 only been that way for last 29 years

• 
  @markridings920910 ай бұрын

  Wow, mine 6" that i always used with my 600 works perfectly fine with my 700

• 
  @augustusgloop933010 ай бұрын

  Hey I just bought one of these. Are they supposed to be wobbly?

• 
  @makeitwork265010 ай бұрын

  Yes. they are a constant velocity joint. They have to move up and down with your suspension.

• 
  @augustusgloop933010 ай бұрын

  @@makeitwork2650 ok maybe it’s that. We bought it used and it sounds like a belt is squeaking. The boots on the axle look like they’re cracking. One side of the axle moves up and down the other side doesn’t

• 
  @makeitwork265010 ай бұрын

  @@augustusgloop9330 yeah, it’s definitely bad.

• 
  @augustusgloop933010 ай бұрын

  @@makeitwork2650 fuck lol. Thanks for getting back to me man

• 
  @danimccarron841311 ай бұрын

  Shocking

• 
  @ohdannyboyjustadiggin11 ай бұрын

  Lots of Bells and Whistles on these Detectors. Thanks for sharing.. Peace

• 
  @davidberan47011 ай бұрын

  To get the stub shaft out of the cv axle I used the square tube on the tow hitch and a 4 way lug nut bar and 10 pound hammer after I cut the boot it knocked it right out

• 
  @Dhammawitt Жыл бұрын

  My brand new Nox 700 had a horrible depth of about 1-2" after several hunts before I realized it wasn't doing much. Not only the depth but the readings were all over the place and couldn't be trusted. I returned it for the 900 which is obviously greater but mostly because the 700 was clearly defective, whether it was the 11" coil or the 700. I wonder if there's just bad coils out there.

• 
  @dianarose2 Жыл бұрын

  How did you change it?

• 
  @makeitwork2650 Жыл бұрын

  Sorry, I didn’t show that on the video. Use your setting button go over to where you set to tone five tones. and all tones it’s at the very top.

• 
  @nebelix9 ай бұрын

  What were the sound settings before DP? 5 tones or multitone?

• 
  @phillipcollins5268 Жыл бұрын

  My 700 is the same way. I have an old house and the yard is loaded with iron. For 14 years I have dug every non ferrous signal with multiple machines. Including the 800. I just got this 700 and I cannot believe how much non ferrous I have found with it. But it loves some nails, all bolts and screws even small ones, even when they are out of the ground. I cannot knock them out horseshoe or not and with ferrous maxed out. I don’t mind in my yard as I found a coins recently with it, a silver dime and a Indian head and several wheats and some relics. I can dig as many holes as I want in my yard. I found it is more of a pain in parks though. I really wish it had more adjustability. Because I used the 900 with a iron bias of zero and dug less iron than this 700 with it maxed out. The 700 will knock out rusty bottle caps effectively though for some reason.

• 
  @libtardismtruth9315 Жыл бұрын

  They ever fix this issue as im wanting to get a 900. I'f not ill just keep my xp deus 2

• 
  @makeitwork2650 Жыл бұрын

  Keep your Deus2

• 
  @makeitwork2650 Жыл бұрын

  @@JC-gd3cc definitely a very good machine! is faster than 800

• 
  @mnech777 Жыл бұрын

  Also, thanks for posting this video. Everybody else seems to see this thing is incredible.

• 
  @mnech777 Жыл бұрын

  I am experiencing the same thing. Unacceptable. I sold my Garrett Apex to get this thing WTF

• 
  @nevinkuser9892 Жыл бұрын

  How did you attach it to the vice grips?

• 
  @makeitwork2650 Жыл бұрын

  Welded a adapter to the end .

• 
  @nevinkuser9892 Жыл бұрын

  @@makeitwork2650 Cool. I see that's the only way to do it but it's a great tool worth having. I'm having trouble getting into the tight axle space on my Toyota Agya. It's an Asian market hatchback. Cramped as all hell down there.

• 
  @bobthebuilder94162 ай бұрын

  Why is this damn tool not sold online or at any repair shops when its sometimes the only damn tool that will get the damn half shaft out

• 
  @p1315 Жыл бұрын

  Park 1 special "Loren Lemcke" program. 🤫

• 
  @GENOBURRITO1 Жыл бұрын

  Seems that a $1000+ detector should have had this already taken care of. Do they not test these machines in research and development?

• 
  @skytrooper506 Жыл бұрын

  Any wiring under there?

• 
  @makeitwork2650 Жыл бұрын

  No, no wiring nothing