Пікірлер

• 
  @jackglossop485911 ай бұрын

  Hahaha I thought this was an actual crash for a second. Still, sorry to see you break your model 🤣

• 
  @anthonymoore4335 Жыл бұрын

  Gald to see it restored! I saw it at Blakesburg, Iowa in 2012 I believe and it was faded and ratty.

• 
  @nova4747 Жыл бұрын

  That sounded like a helicopter

• 
  @boxer9512 жыл бұрын

  When he reved it up and walked away I thought that bench was gonna take off flying 🤣

• 
  @miguelaltamirano88992 жыл бұрын

  Con otro motor

• 
  @kiwiflyer37972 жыл бұрын

  hmm is the motor always connected to the engine? if so, why

• 
  @gsmith68792 жыл бұрын

  The motor and gear train disengages from the engine using a clutch bearing in the main gear. The Clutch bearing locks to start the engine and freewheels when the engine starts and runs.

• 
  @kiwiflyer37972 жыл бұрын

  @@gsmith6879 owh yeah good to know. thanks for the answer

• 
  @hillscanlon27172 жыл бұрын

  Thanks what size battery are you using Thanks.

• 
  @gsmith68792 жыл бұрын

  3 cell 1000mah 40C LiPo pack

• 
  @ronwillets14712 жыл бұрын

  Hi i have a dl 100 ...would you have any idea if this woyld be compatible i have two other eme autostarts on dle 55 's T i a Ron

• 
  @ricardomartins7123 жыл бұрын

  I believe the same starter will work on dle 120 and dle 85, right? I have a dle 85 but I'm not sure if I can use this

• 
  @gsmith68793 жыл бұрын

  It won't fit the DLE 85 and will fit the 120 with some modifications.

• 
  @hillscanlon27173 жыл бұрын

  Great work, do you have any instructions on how to fit this as I've got one but never came with any information thanks 😊

• 
  @gsmith68793 жыл бұрын

  No instructions but fairly intuitive to install. You will have to pull the original hub and then install the starter hub. I did mine with a gear puller.

• 
  @hillscanlon27173 жыл бұрын

  Any information on fitting this as I'm looking for installation and i didn't get any? Looks great.

• 
  @gsmith68793 жыл бұрын

  Your on your own. No instructions but it is pretty easy to install. The hardest part is removing the original hub. I used a set of gear pullers.

• 
  @over2seeyer3 жыл бұрын

  Can it be use as alternator to recharge the batteries?

• 
  @gsmith68793 жыл бұрын

  No.

• 
  @JuanSpeedAudio13 жыл бұрын

  👏🏼👏🏼👏🏼👍👍👍👌🏼👌🏼👌🏼

• 
  @gsmith68793 жыл бұрын

  Thank you.

• 
  @flychip40013 жыл бұрын

  will this work on a dle40 twin?

• 
  @gsmith68793 жыл бұрын

  No.

• 
  @flychip40013 жыл бұрын

  will this work on a dle 40 twin? if so where do i order it?

• 
  @gsmith68793 жыл бұрын

  No.

• 
  @AN-ce1nd3 жыл бұрын

  Great job! I gave up on mine. Manual for me

• 
  @wildgoobsid54 жыл бұрын

  I hope this is for real. How about one for all the DLE twins. Please.

• 
  @gsmith68794 жыл бұрын

  Only for the 111 and 120s. Do an Ebay search for EME Starters

• 
  @ja2706pw6u4 жыл бұрын

  Dear Mr.Gaines Smith Is this starter still available , Sir ?

• 
  @gsmith68794 жыл бұрын

  No longer available.

• 
  @ja2706pw6u4 жыл бұрын

  Thank you so much for your reply .

• 
  @btomas2254 жыл бұрын

  Looks great!

• 
  @dgable20075 жыл бұрын

  Now that is sweet music, Gaines

• 
  @gsmith68795 жыл бұрын

  Thanks, Danny.

• 
  @johnkinnane5475 жыл бұрын

  Thanks a lovely plane with classic looks. Nice to hear a petrol engine in it thanks for filming it, it must be a joy to fly regards John Tasmania Australia

• 
  @josiascloete5 жыл бұрын

  nice!! what is the rpm on this motor

• 
  @gsmith68795 жыл бұрын

  6300 rpm on a 24 x 10 Xoar prop

• 
  @Stone1775 жыл бұрын

  Elevator problem

• 
  @gsmith68795 жыл бұрын

  Too soon to tell but I think it could have been a battery system failure. I got a low battery warning and RSSI critical warning at the same time just before it quit responding and went in.

• 
  @Stone1775 жыл бұрын

  @@gsmith6879 What radio system? always run two batteries

• 
  @gsmith68795 жыл бұрын

  @@Stone177 I was running dual redundant A123 2500mah packs through a 42% Batshare. Radio is a FrSky Horus with redundancy receivers.

• 
  @ScaleAero5 жыл бұрын

  Gotta love the 180 toward the end... :^)

• 
  @gsmith68795 жыл бұрын

  Yea, just showing off:-)

• 
  @StevenCain226 жыл бұрын

  We get it, you're trying to make the test stand fly, it's not going to fly man!

• 
  @AliGbk6 жыл бұрын

  Will this starter work on dla 112?

• 
  @gsmith68796 жыл бұрын

  I don't know. The crankshaft and crankcase will have to be identical.

• 
  @AliGbk6 жыл бұрын

  Will this fit dla 112?

• 
  @gsmith68796 жыл бұрын

  I don't know. The crankcase and crankshaft has to be idential.

• 
  @marklong73197 жыл бұрын

  www.dxhobby.com/electric-starter-for-dle111dle120-da100-3w106-gasoline-engines-p-442.html

• 
  @niklaswallin94787 жыл бұрын

  reciever? my s6r did that on one ch last time I tried but i've updated now..

• 
  @NoctuaStrigiformes7 жыл бұрын

  Phew! That Lysander is gorgeous!

• 
  @gsmith68797 жыл бұрын

  Yea, but a work in progress. Lots of issues with this ARF.

• 
  @triumphdaytonasuper37 жыл бұрын

  Congratulations ! You've got here two nice A/C. What is the TOW of these Beasts ? I'd like to build one for my Moki 250 but it will be difficult (impossible ?) to stay under the 50 lbs...

• 
  @gsmith68797 жыл бұрын

  The TOW is 58 pounds on the AD5 and 62 pounds on my A1H. Both are prototypes and can be built lighter but not much under 55 pounds. The Moki 250 will fit the cowl perfectly. I have the plans, FG parts, and short kits available. Shoot me an email if interested. [email protected]

• 
  @francescocoppola597 жыл бұрын

  Hello Congratulations for the beautiful work, in which scale you're building your Bronco?

• 
  @gsmith68797 жыл бұрын

  1/5th scale. 96" WS I have a build thread on RCSB. www.rcscalebuilder.com/forum/forum_posts.asp?TID=24163&PN=1

• 
  @carlpate79417 жыл бұрын

  Good afternoon Gaines. I was looking into options for a different set of mufflers for my GT-80 when I noticed your electric starter you designed. I would be interested in one if available. Thanks, Carl

• 
  @gsmith68797 жыл бұрын

  Let's go to email and we can discuss. [email protected]

• 
  @chriscraft4105 жыл бұрын

  Gaines Smith Are you selling the starter system in the video ? [email protected]

• 
  @keithmarston98227 жыл бұрын

  hi lads whot sise cogs and whair do u get the mount from pls ta k marston uk gb

• 
  @gsmith68797 жыл бұрын

  I purchased the starter from SDS Hobbies. www.sdshobby.com/engine-fuel-accessories/ignition-system-starter-system/starter-access/electric-starter-for-dle111-gasoline-engine.html

• 
  @keithmarston98227 жыл бұрын

  ok bud thanks keith m

• 
  @pawezawadzki30188 жыл бұрын

  Congratulation This is motor NTM 35-42 Series 1000KV / 700W on 3s Lipol? How is starter to motor gear ratio?

• 
  @gsmith68798 жыл бұрын

  Yes, a 3 cell 1000mah LiPo. Good for a weekend of starts. The gear ratio does the job but I don't know what the numbers are and the starter is buried in the cowl. So can't count the teeth. It has be operating reliably for over two years now.

• 
  @pawezawadzki30188 жыл бұрын

  How is about starter system weight? For me the total gear ratio si about 1:20. I see that electric motor don't turn after engine run. In this starter is use one-wa bearing? How do you think? It is possible use this setup without one-wa bearing as starter-generator?

• 
  @gsmith68798 жыл бұрын

  I think the weight was about a pound but don't remember exactly. The main gear has a Sprag one way clutch bearing. The bearings in the secondary gears do not have strong enough bearings to handle the loads of a generator,

• 
  @michaelsteinbach99478 жыл бұрын

  Hi Gaines. Great Job :-) which NTM Prop Drive series 3542 did you use? the 1000 or 1250 KV? thanks for Feedback, Mike

• 
  @PushparajAmeen8 жыл бұрын

  any idea or any plan to make ?

• 
  @gsmith68798 жыл бұрын

  Not right now.

• 
  @PushparajAmeen8 жыл бұрын

  hi smith where can i get this starter ?

• 
  @gsmith68798 жыл бұрын

  +Pushparaj Ameen It is not for sale.

• 
  @markpark95398 жыл бұрын

  its lean....give it some fuel.

• 
  @gsmith68799 жыл бұрын

  Thanks Merlyn.

• 
  @sevarg72269 жыл бұрын

  Pretty D**m Cool, Gaines. You really do marvelous work!!

• 
  @gsmith68799 жыл бұрын

  Thanks. Here is a better video of the test flight this week. kzread.info/dash/bejne/g5eJ1q5wer3eopc.html

• 
  @walterschafer83379 жыл бұрын

  that bird looks outstanding

• 
  @Candelaresearchcenter9 жыл бұрын

  Very nice .. very nice,,

• 
  @walterschafer83379 жыл бұрын

  really great work

• 
  @Candelaresearchcenter9 жыл бұрын

  great job,nice work on door and lift mech,,,

• 
  @user-ok6yg7ux8e9 жыл бұрын

  台灣人嗎？看得懂中文嗎？想請教您這個引擎的啟動器相關問題 謝謝

• 
  @user-ok6yg7ux8e9 жыл бұрын

  The starter kit is its own R & D is still ready to buy? 2, what he can do more than take a few photos Reference

• 
  @gsmith68799 жыл бұрын

  I'm not sure I understand what you comment or question was.

• 
  @77Avadon779 жыл бұрын

  WHat the hell is with your gear system. First the left collapses, then the right O_O

• 
  @TheDemon1907 жыл бұрын

  77Avadon77 no it didn't only the right went because it slammed in too hard

• 
  @77Avadon779 жыл бұрын

  Excellent flying. The runway is pretty crappy though. For making a beautiful scale take off you really need a perfect smooth surface. Awesome bronco!~!