Devon’s Property Maintenance
Devon’s Property Maintenance
We like to make peoples lives easier by sharing our mistakes and successes. If I run in to troubles it’s more than likely someone else out there is running into the same thing. Enjoy first hand the growth of a young entrepreneur.
Пікірлер
Good job
Thanks
I did this but with a new window gasket and my window gets stuck halfway up, I’m guessing I didn’t put it in the valleys right
You might need to lube her up if you put in new seals as well, make sure the window motor and arm was all the way down when you installed it
Is yours really hard to pull off a rabbit? Is that how it broke?
It was yes, I ripped it right off on accident
I have a brand new PB770H and I’m having trouble reconnecting the throttle cable because it’s so loose. It pops out easily. Is there a way to tighten it a bit?
There should be a set screw on the carb
No one can see with the camera on your head.
This sucks
No it doesn't. U only get 1 back my guy
@@jb8979 clearly missed the joke
Looks like you have the same truck as me, I put a ¾ plywood on the seat and three packout plates. If you don't plan on ever using the seat ,it creates a lot of room.
That’s a great idea, I didn’t need that much space for tools so this was the easiest solution for under 300
Don’t forget to subscribe new videos every week!
DPM for the win!!
Great Video! I look forward to part 2!!
You have 80 now
Great video. The window on my '04 F250 exploded overnight in the extreme cold and i used this video as my guide. One suggestion is to remove the door speaker and stick it to the panel with the magnet. It helped a lot when putting the new glass in. i was able to get my XXl hands in and work with it much easier.
Glad it helped!
This video helped me with my windows. I'll add I found if you spray the window channels with WD-40 / PB Blaster they slide in 10x easier.
That’s a good idea!
Self tappers there you go 👍
Brilliant method! I'm going to try this tomorrow, thanks!
Oh, wait they always do that. But what was that third thing?
I didn’t know the buses ran this late.
@@DerekFerrell8152 They don't.
@@brandongreene6175well there dropping someone off
Thank you. This is just what I needed!
Show us how to adjust fueling
There should be a valve on the carburetor that you can tighten or loosen.
soooo your sayin...............self tappers? ................as in self tappers?......................
i wonder if this would fix my speedo problem, it’s been getting stuck at 75 and rolling over to 100 when i come to a stop
It might wouldn’t hurt to give it a try
When’s the second video coming? I’m curious of how to hook up the little light bar to come on with the cargo lights as my truck (2015 Silverado 2500) doesn’t have auxiliary switches either
I can make a video on it. I just added an auxiliary 4 gang switch box in the truck cab to control on separate switches. I didn’t hook it up to come on with the cargo lights. It’s more of a reverse light while I’m plowing.
AUX BEAM makes the absolute best gang box switch, Auxbeam 8 Gang Switch Panel BA80, Universal Circuit Control Relay System Box with Automatic Dimmable On-Off LED Switch Pod Touch Switch Box for Car Pickup Truck Jeep Boat UTV SUV, Blue 2 Year Warranty
#1 : the pre-filter is hidding behind the bracket in the air filter door. #2 : Always remove the easily accessable spark arrestor (screen) in the muffler since the 2cyl oil gathers on it & clogs the exhaust thus lowering the power tremendously. TRY THIS BEFORE DOING ALL THAT
I appreciate the input, I’ll try that out!
You can't see
You do realize they have special bolts that work for that right?
Yes I ended up purchasing some with some brackets
Where did you get them?
@@robburns8196The magnum website. They are just square head bolts that slide into the grove of the rack.
I'm having this same issue after replacing a dead battery. Did this solve your problem?
It solved it for a few weeks and then it came back I had a wire shorting in the shifter by the over drive
@@devonspropertymaintenance3400 that's a pain in the butt. I hope mine doesn't do that. Mine ended up fixing itself after a few days lol. Don't ask me how? But I never had a problem till the battery died. After changing it it was all squirrely. Just let it sit for a few days and now it's fine? Ford electronics am I right?
Yeah they are some magical machines 🤣🤣 who needs a mechanic? Fords fix themselves
Where did you get the new throttle lever?
I found it on Amazon “Briggs and Stratton throttle cable” 740194MA
Any idea if this would fix the speedo on my excursion, no shifting problems or anything Speedo just does not read over 40 even when doing 90
It’s either the speed sensor or it’s a short some where start with the sensor!
Have the same issue in my 99 superduty. Won’t go over 40.
Subbed! This vid helped me. Thanks!
Glad I could help!
Devon’s Property Maintenance. I have Echo PB 8010T backpack blower it’s very powerful blower 220 mph air speed moves debris 1,071 cubic feet per minute it blows the debris farther. They don’t make 8010 anymore it replaced foe 9010
Yeah the 9010 is insane I’m going to be upgrading here soon! I’ll make a review video on it!
Replaced mine erased the code and the code came back. Most likely a break in a wire. No speedometer problems. ABS light is on and OD light is blinking with shifting problems.
I would check for a short definitely if there are no speedometer problems then it’s not the VSS
First place I’d check is where the o/d button meets the shifter, only because mine is separated and held together with duck tape
@@devonspropertymaintenance3400 was a break in the wire externally it looked fine. Was making intermittent contact. Found a Ford only code reader for my ELM327 Bluetooth obd2 that pulls up more codes and can read abs and airbag codes. Have a P0781 and P0782. Will have to drop the pan and clean solenoid assembly and do a filter fluid change.
Just curious where the break in the wire was. I'm dealing with vss code and won't go into overdrive. Changed sensor no luck yet.
@@rgsteele83 I've seen breaks in several locations, check up under the cab were the wire loom leaves the cab. The next place to check is by the axle on the frame where the vss wires branch off the main harness.
I did about 20 a day when I was a landscaper.
4
𝘱𝘳𝘰𝘮𝘰𝘴𝘮 😈
Ye beautiful
That video was incredibly lame
How do u keep your shot open
Honestly we used a bungee cord for a while but the exhaust melted the shoot open so no need for the bungee cord now lol
@@devonspropertymaintenance3400 ok
What’s your trasmition do ?
My transmission was perfectly fine no rough shifting or anything
Love ur video hope
What that do on your trasmition
I wasn’t having any issues with the transmission I know some people had some issues with rough shifting but I didn’t it was just the over drive light blinking and the speedometer bouncing
@@devonspropertymaintenance3400my overdrive light blinks periodically, not all the time ….but no problem with my speedometer the mechanic is saying its the rear sensor like yours and my transmission shifts just fine but I don’t have speedometer issues do you think that could be it ???