Mine doesn’t have the button I didn’t know they had variations of this stock.
@tittyskillet34133 күн бұрын
The worst gun review ever. Forget this channel 3:01
@jeffszakacs75083 күн бұрын
They don’t have 14.5 only 13.7 and 16 and 10.4
@jeffszakacs75083 күн бұрын
What about the rails if they only have 13.7 can a 14.5 geissele hk .rail work ? Don’t seee how unless 16 is cut down so then pin weld
@shovelhead21554 күн бұрын
The M4 mark is on the front of the upper where the gas tube enters the upper.
@shovelhead21554 күн бұрын
Anyone else get a barrel mounted sling swivel (13629 marked) and/or a Rosco manufactured Barrel? M4 marked upper?(Midway usa circa 2019)
@abrahamavila63116 күн бұрын
today i added kchilites ditch lights on my 3rd gen tacoma. I got everything wired up in the engine bay and ran the dual button cable through firewall. Today i ordered the caliraised tall dual switch. Its my first time that i will be installing a switch into my tacoma. Whats the best way to open up that buttons console? To remove that tall space plain button and install the new one.
@thee_adam_jagger5 күн бұрын
Nice, that’s what’s up. Your best bet is to either reach behind the panel and squeeze the clips to pop ot out or remove the panel itself and pop the switch cover out.
@abrahamavila63114 күн бұрын
Thank you, how would you make It work my kchilites dual switch is powered by 3 cables green=amber led, white= white led, and yellow cable is the power. I ordered the caliraised dual tall switch but i noticed it has 5 cables compared to the 3 cables that powers the kc dual switch. How can i make it work properly?
@dankinsler19306 күн бұрын
Waiting for your review. Been thinking about getting the Springfield. I've handled it at the local Shoot Straight and it feels great in the hand.
@thee_adam_jagger6 күн бұрын
@@dankinsler1930 it does feel good. I will have some more rounds on it here soon enough.
@SebaofSot7 күн бұрын
The carry handle, front sight post, and free floated picatinny handguard on a carbine lower, is PEAK rifle aesthetics, you have some good taste
@user-ls8er4ii1i12 күн бұрын
Cool gun
@ChristianGrest12 күн бұрын
Man that’s so funny we both release CZ videos on the same day. I picked up the Shadow 2 compact a couple months back as well. Man the grip fits me perfectly. Might snag a P-01 next. Sucks about your IG account… that crap sucks. I do dig the off-road stuff though. Need to do some more of that on my channel. I’m way overdue for a Raptor update.
@ThadiusArillious12 күн бұрын
I've been looking at these, and the Girsan MC P35's. I'll have to check yours out in person!
@thee_adam_jagger12 күн бұрын
@@ThadiusArillious for sure, I’ll get back over there soon and bring it with.
@collinolig805612 күн бұрын
Man, it’s hard to follow with how slow you talk in this video
@thee_adam_jagger8 күн бұрын
thats ok
@tjtj302714 күн бұрын
Their instructions are garbage.
@weshallfishing712216 күн бұрын
Good video, I just bought one yesterday and don’t know a whole lot about side by sides, needed one to haul to the hunting club so it will be easier to get a deer out of the woods because some of the areas they like to run to are wet areas that I wouldn’t want to take a truck into. And also to help carry corn to feeders, our feeders are all down narrow pine rows a good ways so it would help having to get 5-6 bags to all of them.
@keeptexasfree736119 күн бұрын
Did you up the torque on the barrel nut?
@liggerstuxin120 күн бұрын
Jacket kinda sucks huh? I’m not thrilled with it. Maybe better with a 300 BO barrel or 308
@liggerstuxin120 күн бұрын
Built my own too. Criterion “core” barrel is the best. 350 and you can’t buy a better barrel. Literally up to 60,000 rounds. CHF CMV crime lined. I want a BCM upper and aero lower. Now only the upper being Aero is the lacking on mine. Finally got a eotech with it. It’s a 3x. 3-0 version. Had a single 1moa dot and it sucked with no circle. ⭕️ so I exchanged real quick. Adjustable aero gas block and a M4-72 Severe-Duty Compensator or a Hypertap. I keep switching and am not sure I want the blowback. I got to zero it at 36 yards.
@ImGoingBerserk21 күн бұрын
I KNEW I RECOGNIZED THAT BUILD! Saw it on reddit not even ten minutes before I found this vid.
@jakewells409822 күн бұрын
I bought a bcm upper with cold hammer forged barrel and it’s not that great. Wonder if I got a bad one. Groups are not tight. My ddmv7 lw however. Very tight!
@justinkase730725 күн бұрын
1st blood❤
@user-tr8pd6ul5t26 күн бұрын
Hey sir, would this mount work on any red dot?
@chaoticcaninejb28 күн бұрын
Seen to many problems with these. Cloud needs to make a product and stick with it. They have to much changes always and bot for the better
@thee_adam_jagger8 күн бұрын
I hear the same things. so far its worked, it gets very hot very quick. it also eats through batteries but at the same time it does perform.
@tizben29 күн бұрын
A little thick in the pocket
@EberlestockАй бұрын
Thanks for giving a walkthrough on the Bandit and rocking our gear!
@cademmoАй бұрын
How good does it cycle shooting subsonic ammo or something like the cci quiet rds using a sclincerco sparrow. Using factory slide I haven’t found an ammo yet my 44 wouldn’t cycle, just curious with the added weight of the metal slide/the junk polymer would do. Thanks for any advice in advance 🤙🤙
@sergiorigazio735Ай бұрын
l'hai modificata? la mia funziona perfettamente con tutte la cartucce High Velocity e ne ho sparate quasi 1000 senza il minimo problema (CCI ,Remington,Aguila,ecc...) E' superlativa!
@StarknightMT_officialАй бұрын
Hello, Are you interested in testing our products? We would like to invite you to test the A-Arm Bushing Kit for your 2022 Polaris ranger 570 full size
@calebcortez2077Ай бұрын
Thanks so much it helps a LOT. I was wondering, where did you attach your 12 volt to? Straight to the battery? Did you run it through a relay? My lights don't take up too much amps so I think I can get away with running it through the dash fuse box but wanted to see what you did
@laloaguilera8645Ай бұрын
Iron sight name brand?
@thee_adam_jagger8 күн бұрын
midwest industries
@starxlord9856Ай бұрын
The okw head is wild on a pistol. Love mine over my other options but the new x300turbo is solid but I’ll take the okw anyday
@jessarellanes6648Ай бұрын
Nice
@jenbuinu5368Ай бұрын
Got mine today (16” bbl medium). I own an LWRC M6A2, so I understand the advantages of a gas piston driven AR. The BRN-4 will sit on a complete LWRC lower. Wish big army issued piston M4s back when I was overseas (OIF & OEF). It would have helped in a lot of operator’s maintenance issues. Not to mention sand. Specially sandstorm days.
@tax905972Ай бұрын
I see a uneven seal
@boolinncoolin2188Ай бұрын
Good shit
@mytquin7605Ай бұрын
the nelson slide is the best way to go. i have had one for a few years and thousands of rounds later it is still going strong.
@mytquin7605Ай бұрын
i have thousands of rounds through my nelson slide. it runs great and i use his guide rod as well. i can shoot any ammo without issues with this set up.
@Littlesnail-hj5gw12 күн бұрын
Hey, I got a question regarding slide catch cutout? because the slide is aluminium it must wear down quite badly? You know the bit where slide catch engages with the slide.. I think that is going to be a problem with this slide but please share your thoughts 🙏
@mytquin760511 күн бұрын
@@Littlesnail-hj5gw honestly, there is some wear but not much at all and both of my slides have been through high volume shooting and functioning well.
@LoveLikeaHurricaneАй бұрын
I'm trying to spec out a rifle on blackoutdefense and they offer B5 Bravo Stock Vs Magpul moe, and B5 type 23 p-grip Vs Magpul MOE. I wasn't sure which one to go for since it will be my first rifle. I just know heard the B5 grip is more upright than the magpul. But the stock I don't see much reviews of differences
@janerimfire3978Ай бұрын
LMAO! Who in their right mind would spend that kind of money on a 10 round non suppressor ready overpriced 22lr pistol. Maybe Me if I didn't know about the FN 502/502T or the Sig P322 which both are optic and suppressor ready, available with 10-25 round mags depending on state law. Your ProMag issue is due to the cycle rate of your slide. I own two 44's with the only upgrade being a minus connector a little nail polish and a black Sharpe. I also run twenty 18 round ProMags with Zero issues and ten low round count oem Glock mags for competition. Two Sig P322's one iron the other optic, same for the Two FN502's Two inexpensive suppressors. I would suggest buying a 502 it feels more like a Glock and I have seen them lately close to $200 less than what I paid
@mytquin7605Ай бұрын
only us glock boys would.
@Bedlam_6Ай бұрын
Any luck yet? Friend has a G44 with delta point micro, runs on CCI MINI MAG VARMINT. Hes trying to wear down spring by leaving it locked back. He is thinking about cutting rings off of stock spring.
@MinorPrecision-zy6cwАй бұрын
*laughs in LWRC*
@lastmanstandingtacticalАй бұрын
will it work with the sordin supreme pro-x?
@cameronsingleton3986Ай бұрын
Where you get the od green Modlite button ?
@thee_adam_jagger8 күн бұрын
it was a limited thing through big tex
@allisadavis87Ай бұрын
And a safety is awesome because nobody likes to put a loaded handgun with no safety next to their dick
@allisadavis87Ай бұрын
Take it for me the guy who carries it every goddamn day everywhere that I go no matter what
@JewTubeSuxАй бұрын
Way too much lube... Yikes! Lol.
@johnlecaАй бұрын
so it comes with the surefire hider. okay.
@thee_adam_jaggerАй бұрын
Lmao wtf?
@johnlecaАй бұрын
@@thee_adam_jagger First thing balh blah and it is not included..typical youtube baloney
@thee_adam_jaggerАй бұрын
@@johnleca 🤣
@itsmillartime6916Ай бұрын
My Fries don’t come with Ketchup either 😓
@thee_adam_jaggerАй бұрын
Right, my truck didn’t come with a camper hooked to it. My lawn didn’t come with a lawn mower. My shoes didn’t come with socks.
@stevenminixАй бұрын
nice, I plan on doing the same build but with jmac customs stock and riser with gearheadworks tailhook on rear
@chrisbennett594Ай бұрын
Did your Instagram get taken down?
@thee_adam_jaggerАй бұрын
Sure did, I’m just taking a week or so off of there until I make a new one. Was hoping my appeal would go through and I’d get it back but it’s not looking like I will.
@2ANinjaАй бұрын
Im building a 20” A1 pretty soon. Ended up going with the JP gas block. Looks good man
Пікірлер
Mine doesn’t have the button I didn’t know they had variations of this stock.
The worst gun review ever. Forget this channel 3:01
They don’t have 14.5 only 13.7 and 16 and 10.4
What about the rails if they only have 13.7 can a 14.5 geissele hk .rail work ? Don’t seee how unless 16 is cut down so then pin weld
The M4 mark is on the front of the upper where the gas tube enters the upper.
Anyone else get a barrel mounted sling swivel (13629 marked) and/or a Rosco manufactured Barrel? M4 marked upper?(Midway usa circa 2019)
today i added kchilites ditch lights on my 3rd gen tacoma. I got everything wired up in the engine bay and ran the dual button cable through firewall. Today i ordered the caliraised tall dual switch. Its my first time that i will be installing a switch into my tacoma. Whats the best way to open up that buttons console? To remove that tall space plain button and install the new one.
Nice, that’s what’s up. Your best bet is to either reach behind the panel and squeeze the clips to pop ot out or remove the panel itself and pop the switch cover out.
Thank you, how would you make It work my kchilites dual switch is powered by 3 cables green=amber led, white= white led, and yellow cable is the power. I ordered the caliraised dual tall switch but i noticed it has 5 cables compared to the 3 cables that powers the kc dual switch. How can i make it work properly?
Waiting for your review. Been thinking about getting the Springfield. I've handled it at the local Shoot Straight and it feels great in the hand.
@@dankinsler1930 it does feel good. I will have some more rounds on it here soon enough.
The carry handle, front sight post, and free floated picatinny handguard on a carbine lower, is PEAK rifle aesthetics, you have some good taste
Cool gun
Man that’s so funny we both release CZ videos on the same day. I picked up the Shadow 2 compact a couple months back as well. Man the grip fits me perfectly. Might snag a P-01 next. Sucks about your IG account… that crap sucks. I do dig the off-road stuff though. Need to do some more of that on my channel. I’m way overdue for a Raptor update.
I've been looking at these, and the Girsan MC P35's. I'll have to check yours out in person!
@@ThadiusArillious for sure, I’ll get back over there soon and bring it with.
Man, it’s hard to follow with how slow you talk in this video
thats ok
Their instructions are garbage.
Good video, I just bought one yesterday and don’t know a whole lot about side by sides, needed one to haul to the hunting club so it will be easier to get a deer out of the woods because some of the areas they like to run to are wet areas that I wouldn’t want to take a truck into. And also to help carry corn to feeders, our feeders are all down narrow pine rows a good ways so it would help having to get 5-6 bags to all of them.
Did you up the torque on the barrel nut?
Jacket kinda sucks huh? I’m not thrilled with it. Maybe better with a 300 BO barrel or 308
Built my own too. Criterion “core” barrel is the best. 350 and you can’t buy a better barrel. Literally up to 60,000 rounds. CHF CMV crime lined. I want a BCM upper and aero lower. Now only the upper being Aero is the lacking on mine. Finally got a eotech with it. It’s a 3x. 3-0 version. Had a single 1moa dot and it sucked with no circle. ⭕️ so I exchanged real quick. Adjustable aero gas block and a M4-72 Severe-Duty Compensator or a Hypertap. I keep switching and am not sure I want the blowback. I got to zero it at 36 yards.
I KNEW I RECOGNIZED THAT BUILD! Saw it on reddit not even ten minutes before I found this vid.
I bought a bcm upper with cold hammer forged barrel and it’s not that great. Wonder if I got a bad one. Groups are not tight. My ddmv7 lw however. Very tight!
1st blood❤
Hey sir, would this mount work on any red dot?
Seen to many problems with these. Cloud needs to make a product and stick with it. They have to much changes always and bot for the better
I hear the same things. so far its worked, it gets very hot very quick. it also eats through batteries but at the same time it does perform.
A little thick in the pocket
Thanks for giving a walkthrough on the Bandit and rocking our gear!
How good does it cycle shooting subsonic ammo or something like the cci quiet rds using a sclincerco sparrow. Using factory slide I haven’t found an ammo yet my 44 wouldn’t cycle, just curious with the added weight of the metal slide/the junk polymer would do. Thanks for any advice in advance 🤙🤙
l'hai modificata? la mia funziona perfettamente con tutte la cartucce High Velocity e ne ho sparate quasi 1000 senza il minimo problema (CCI ,Remington,Aguila,ecc...) E' superlativa!
Hello, Are you interested in testing our products? We would like to invite you to test the A-Arm Bushing Kit for your 2022 Polaris ranger 570 full size
Thanks so much it helps a LOT. I was wondering, where did you attach your 12 volt to? Straight to the battery? Did you run it through a relay? My lights don't take up too much amps so I think I can get away with running it through the dash fuse box but wanted to see what you did
Iron sight name brand?
midwest industries
The okw head is wild on a pistol. Love mine over my other options but the new x300turbo is solid but I’ll take the okw anyday
Nice
Got mine today (16” bbl medium). I own an LWRC M6A2, so I understand the advantages of a gas piston driven AR. The BRN-4 will sit on a complete LWRC lower. Wish big army issued piston M4s back when I was overseas (OIF & OEF). It would have helped in a lot of operator’s maintenance issues. Not to mention sand. Specially sandstorm days.
I see a uneven seal
Good shit
the nelson slide is the best way to go. i have had one for a few years and thousands of rounds later it is still going strong.
i have thousands of rounds through my nelson slide. it runs great and i use his guide rod as well. i can shoot any ammo without issues with this set up.
Hey, I got a question regarding slide catch cutout? because the slide is aluminium it must wear down quite badly? You know the bit where slide catch engages with the slide.. I think that is going to be a problem with this slide but please share your thoughts 🙏
@@Littlesnail-hj5gw honestly, there is some wear but not much at all and both of my slides have been through high volume shooting and functioning well.
I'm trying to spec out a rifle on blackoutdefense and they offer B5 Bravo Stock Vs Magpul moe, and B5 type 23 p-grip Vs Magpul MOE. I wasn't sure which one to go for since it will be my first rifle. I just know heard the B5 grip is more upright than the magpul. But the stock I don't see much reviews of differences
LMAO! Who in their right mind would spend that kind of money on a 10 round non suppressor ready overpriced 22lr pistol. Maybe Me if I didn't know about the FN 502/502T or the Sig P322 which both are optic and suppressor ready, available with 10-25 round mags depending on state law. Your ProMag issue is due to the cycle rate of your slide. I own two 44's with the only upgrade being a minus connector a little nail polish and a black Sharpe. I also run twenty 18 round ProMags with Zero issues and ten low round count oem Glock mags for competition. Two Sig P322's one iron the other optic, same for the Two FN502's Two inexpensive suppressors. I would suggest buying a 502 it feels more like a Glock and I have seen them lately close to $200 less than what I paid
only us glock boys would.
Any luck yet? Friend has a G44 with delta point micro, runs on CCI MINI MAG VARMINT. Hes trying to wear down spring by leaving it locked back. He is thinking about cutting rings off of stock spring.
*laughs in LWRC*
will it work with the sordin supreme pro-x?
Where you get the od green Modlite button ?
it was a limited thing through big tex
And a safety is awesome because nobody likes to put a loaded handgun with no safety next to their dick
Take it for me the guy who carries it every goddamn day everywhere that I go no matter what
Way too much lube... Yikes! Lol.
so it comes with the surefire hider. okay.
Lmao wtf?
@@thee_adam_jagger First thing balh blah and it is not included..typical youtube baloney
@@johnleca 🤣
My Fries don’t come with Ketchup either 😓
Right, my truck didn’t come with a camper hooked to it. My lawn didn’t come with a lawn mower. My shoes didn’t come with socks.
nice, I plan on doing the same build but with jmac customs stock and riser with gearheadworks tailhook on rear
Did your Instagram get taken down?
Sure did, I’m just taking a week or so off of there until I make a new one. Was hoping my appeal would go through and I’d get it back but it’s not looking like I will.
Im building a 20” A1 pretty soon. Ended up going with the JP gas block. Looks good man