Artwork courtesy of Jerry Stillwell Unconventional guy building and showing you the designs and steps that it takes to create top shelf equipment. "Secrets others wont tell" "Drive it like you stole it attitude" "A little quirk makes it work"
Can I go out there with a massy Ferguson 1030 tractor?
@dustinjessie698218 күн бұрын
Where did you get the cam?
@cloes_Grandpa20 күн бұрын
Lets go!!!!!!!!!!!!!
@cloes_Grandpa21 күн бұрын
That isn't far from me I live in Youngstown Ohio. One day I'll have a tractor to ride with my granddaughter but till then I'll just enjoy watching. And who wins ......... Everyone!!!!!!!
@GeneralAtomics26 күн бұрын
Wish I still had my Grandfather's old Springfield or his Massey Ferguson now. They would have made awesome trail rides.
@donavenfrantzen643526 күн бұрын
What kind of wheel horse
@cloes_Grandpa26 күн бұрын
Say a guy gets a rig that ain't as capable as y'all ......yet....... Is the invitation still open I'm doing my best to get a rig together ( nothing but fails so far ) I'm poor poor and tried working for some got messed over a few times with lies and broken stuff. But I'm still trying lol but no one I know is into it.
@williamcooper209529 күн бұрын
I got a mud hole at my house that it's impossible to go through, you boys would have a heck of a time going through it with the mowers
@chriswalker4272Ай бұрын
Great vid thank you sir. Just love these wee garden tractors, so tough and versatile. I'm trying to get my woodland neighbours to get into them too, but there's not many in the Highlands. But they loads of fun to modify and capable off-road 👍
@LauraBarr-vo3tlАй бұрын
This looks like busgo with garden tractors
@TrashPanda71Ай бұрын
What motor was that guy running ?
@MyWifeHatesPaintballАй бұрын
Did you change the pulleys out to get that speed?
@Damons_mower-shannagins2 ай бұрын
How’d you get it to have speed
@MrStudabakerАй бұрын
Lots of patience and many tear downs.
@Damons_mower-shannaginsАй бұрын
Yea but like could you do a video on it and show us the gears and what not
@mylesbrown47082 ай бұрын
How do you get the cub to go as fast as it does?
@MrStudabaker2 ай бұрын
Did you know that if you remove the bowl gears and hook the driveshaft directly to the trans you can expect to see 51mph under wot.
@brandoncodling68042 ай бұрын
Man would I like to guys come up to vermont and take a rid with me
@MrStudabaker2 ай бұрын
I've been there where was you. John deere camp was filmed in Vermont/New hamshire.
@mylesbrown47082 ай бұрын
How do you get it to go so fast being shaft driven?? Different gears?
@MrStudabaker2 ай бұрын
It took a while, thru gears, motor and an insane driver.
@nbr44073 ай бұрын
What is your steering and tie rods
@MrStudabaker2 ай бұрын
Stock steering, custom drag link 5/8 dia, 1/2" heim joints with 1/2-20 thread and custom tie rod bar (OEM rod slipped throu a 1" water pipe.
@crazidirtbiker3 ай бұрын
Have you ever heard of the Honda mighty 13R 4x4. If I could have any tractor it would be that. The ground clearance on these are insane. kzread.info/dash/bejne/mZ-H1LuzhbrViJs.htmlsi=rHgIoeZtX5p4kzNz
@M_Track3 ай бұрын
My mud mower could never compete ):
@MrStudabaker3 ай бұрын
Wait. What. I bet there's more to this then what meets the eye.
@M_Track3 ай бұрын
@@MrStudabaker No, I'm just saying my mud Mower could never compete with your guys mud mowers.
@DonovanBryant924 ай бұрын
Rescued a 1450 with a 14hp kohler a couple weeks ago from my local junkyard and i plan to get atv style wheels and tires and make it go much faster for off road just need to find out its lug pattern and what style transmission its got in it
@MrStudabaker3 ай бұрын
Awesome. How long have you been on the tractor mower scene?
@cmgamexx10344 ай бұрын
are they still belt drive or is the whole drivetrain different completely
@MrStudabaker3 ай бұрын
All belt for off road use. It's cheap and easy to make changes.
@phoenixarizona84414 ай бұрын
Pipe Dream needs a full roll cage then it'll look like a buggy
@MrStudabaker3 ай бұрын
Awe man booo...it's supposed to be a quasi mower.
@phoenixarizona8441Ай бұрын
@MrStudabaker it's badass
@phoenixarizona8441Ай бұрын
@MrStudabaker my dad built mini rail buggies for all of us in the 90's and early 2000's out of off road mowers they are all over Tennessee he built utvs before Polaris had a Polaris ranger they copied us
@okoffroadmowers5 ай бұрын
Super excited to see a transaxle build!
@MrStudabaker5 ай бұрын
It's going to be interesting.
@dougcalahan60415 ай бұрын
is that just a pully swap? How do you guys get them to go that fast? I just discovered this amazing hobby! New to the game
@MrStudabaker5 ай бұрын
Welcome. Mowers are a whoot. Those guys are running a 6" sheave on the motor with a 5" on the transaxle. Some do a 4"on the axle.
@liljoeii60915 ай бұрын
Thank you for the video
@kylerandall12475 ай бұрын
Looking to build a mower and join yall. Do you guys have a Facebook group ? Im from Remus Michigan
@MrStudabaker5 ай бұрын
Oh man, that's awesome, and welcome to the club. Remus. Hahaha, I love that little town. There are two pages: Mud mowers from hell Gambler 100 (mower edition) Both are michigan based. Maybe I see you on there.
@liljoeii60915 ай бұрын
AWESOME VIDEO THANK YOU FOR THE VIDEO
@barbraeross69405 ай бұрын
Great video! Keep them coming!
@liljoeii60915 ай бұрын
Awesome job getting fix thank you for the video
@liljoeii60915 ай бұрын
I like your creative side the way you were putting that transmission together thank you for the video
@MrStudabaker5 ай бұрын
Man, dude, this is an honor. Many warm thank yous.
@liljoeii60915 ай бұрын
That was awesome when he was kicking up all that mud thank you for the video
@MrStudabaker5 ай бұрын
Ikr, that mower was a ripper. Are you anywhere close to Michigan?
@liljoeii60915 ай бұрын
That was awesome when he was flying through cutting all that grass thank you for the video
@MrStudabaker5 ай бұрын
Haha, no problems LOVE making trenches all day on a mower. Have you ever been on a super modified mower?
@giverthebeans97115 ай бұрын
Gaawddd what kind of motors?????
@MrStudabaker5 ай бұрын
Ikr...F.A.A.F.O. has a built 670 The sears has a slightly warmed over kohler.
@Tennesseemountainhomestead5 ай бұрын
Very cool, looks like a good time! Thanks for posting!
@MrStudabaker5 ай бұрын
Hey thanks, what was the part of the video for you?
@Tennesseemountainhomestead5 ай бұрын
I think the wheelies are cool when they take off. Otherwise, it looked to me like a fun get together. The small tire mowers really move out
@MrStudabaker5 ай бұрын
Yeah the wheelies are the coolest for me as well. Believe it not all those boys run stock mower engines in there dragsters and need all the small tire torque. I'm curious, hows that John Deere treating ya?
@Tennesseemountainhomestead5 ай бұрын
I’m really impressed with how tough it is, the John Deere I built. Stock it had a variator belt system. I gutted all that and built a one off pulley system that mimics the way a Wheel Horse one looks. It has the Creepycrawler clutch setup. I did make a couple tweaks like an adjustable back side idler that takes up the slack from belt stretch and wraps the trans pulley more. I honestly didn’t expect it to work so well as it has. The same belt has been on it since day one and still shows no signs of distress. I’ve been gradually abusing it more and more as I’ve gotten more comfortable riding harder. The whole thing besides that is solid, as I expected. I have not had to fix anything or do any maintenance, yet… the Predator 670 has been great so far too. So, no complaints! The only downside is that it’s unique and cost me a few grand plus a ton of hours to build. So with that, I am afraid to really trash on it 😅 like I see some guys doing to theirs I want to build a beater mower at some point that’s not so complicated, has an 820 and is a couple hundred pounds lighter. Thank you for asking!
@MrStudabaker5 ай бұрын
Ya I know the feeling, Maximus cost the most to build out on my end.
@liljoeii60915 ай бұрын
THANK YOU FOR THE VIDEO
@MrStudabaker5 ай бұрын
No problem and thank you. Can I ask what was your favorite part?
@liljoeii60915 ай бұрын
@@MrStudabaker anytime when you guys are climbing rocks or getting in the mud and get stuck or anytime you guys are racing
@MrStudabaker5 ай бұрын
@@liljoeii6091 Awesome, thank you. I may be able to help with this;)
@liljoeii60915 ай бұрын
Awesome video thank you for the video
@MrStudabaker5 ай бұрын
No problem, was it entertaining enough?
@michaelwyrick40465 ай бұрын
Talk smack, get whacked. Great video cleetus!
@MrStudabaker5 ай бұрын
Right where the hairs are the shortest hahahaha
@aroffroadmowers39615 ай бұрын
Cleetus we love the video. Also see that you put in the one part I love it!!!! Sweet ass video ready for the next one!
@MrStudabaker5 ай бұрын
Thank you, oh so ready for the cub trans axle build.
@cs-mudmowersfromhell92665 ай бұрын
You need to make sure you come video the next couple drags for sure , I just beat Chris Willett in a drag race on Feb 3rd 2024 and have to beat him 1 more time to get back on top of the list
@MrStudabaker5 ай бұрын
I'm down to film this.
@craftsmancrusher2075 ай бұрын
Great video man the drags were badass! Im definitely interested and eager to see more cub cadet work!
@MrStudabaker5 ай бұрын
Thank you, I'm on it like stink on a skunk.
@johnkoury11165 ай бұрын
I was just wondering how you were. I am so happy you posted this. Where was Kaizer?
@MrStudabaker5 ай бұрын
Thank you for asking. I'm doing a whole lot better now. I do hope it shows in this and all the up coming videos. Keizer is getting an update to its motor.
@JLDbikes5 ай бұрын
Looks like awesome fun 👌
@MrStudabaker5 ай бұрын
I'm glad it shows. It was one of the best times.
@Never2clean2send6 ай бұрын
where are you located. i would like to come out this year
@MrStudabaker6 ай бұрын
How close are you to West Branch, Michigan?
@Never2clean2send5 ай бұрын
Pretty far, im in ct@@MrStudabaker
@MrStudabaker5 ай бұрын
@Never2clean2send ifn you come out this way it will most certainly be more than a day of tractoring expect days of it.
@Never2clean2send5 ай бұрын
OK thank you @@MrStudabaker
@MrStudabaker5 ай бұрын
@@Never2clean2send so your in the new england area. I will be out that way filming a mowVenture this summer. Your more then welcome to show up.
@johnrodgers19686 ай бұрын
That was awesome
@MrStudabaker5 ай бұрын
Thank you
@adamsylvestre23366 ай бұрын
can someone tell me what keith’s machine runs for a pulley set up ?
@MrStudabaker6 ай бұрын
My bad didn't ask.
@user-zm2wv9ze7y6 ай бұрын
It would be awesome to see Maximus vs that built wheel horse 👍👍
@MrStudabaker6 ай бұрын
Hmm, I might be able to make that happen.
@ritamarrel68966 ай бұрын
That mud hole got sheety quick 🎉
@Johndeere81376 ай бұрын
What kind of cub was tgat
@MrStudabaker6 ай бұрын
Quite possibly the most powerful mower on the trails.
Пікірлер
Amazing Rigs Guy's
Can I go out there with a massy Ferguson 1030 tractor?
Where did you get the cam?
Lets go!!!!!!!!!!!!!
That isn't far from me I live in Youngstown Ohio. One day I'll have a tractor to ride with my granddaughter but till then I'll just enjoy watching. And who wins ......... Everyone!!!!!!!
Wish I still had my Grandfather's old Springfield or his Massey Ferguson now. They would have made awesome trail rides.
What kind of wheel horse
Say a guy gets a rig that ain't as capable as y'all ......yet....... Is the invitation still open I'm doing my best to get a rig together ( nothing but fails so far ) I'm poor poor and tried working for some got messed over a few times with lies and broken stuff. But I'm still trying lol but no one I know is into it.
I got a mud hole at my house that it's impossible to go through, you boys would have a heck of a time going through it with the mowers
Great vid thank you sir. Just love these wee garden tractors, so tough and versatile. I'm trying to get my woodland neighbours to get into them too, but there's not many in the Highlands. But they loads of fun to modify and capable off-road 👍
This looks like busgo with garden tractors
What motor was that guy running ?
Did you change the pulleys out to get that speed?
How’d you get it to have speed
Lots of patience and many tear downs.
Yea but like could you do a video on it and show us the gears and what not
How do you get the cub to go as fast as it does?
Did you know that if you remove the bowl gears and hook the driveshaft directly to the trans you can expect to see 51mph under wot.
Man would I like to guys come up to vermont and take a rid with me
I've been there where was you. John deere camp was filmed in Vermont/New hamshire.
How do you get it to go so fast being shaft driven?? Different gears?
It took a while, thru gears, motor and an insane driver.
What is your steering and tie rods
Stock steering, custom drag link 5/8 dia, 1/2" heim joints with 1/2-20 thread and custom tie rod bar (OEM rod slipped throu a 1" water pipe.
Have you ever heard of the Honda mighty 13R 4x4. If I could have any tractor it would be that. The ground clearance on these are insane. kzread.info/dash/bejne/mZ-H1LuzhbrViJs.htmlsi=rHgIoeZtX5p4kzNz
My mud mower could never compete ):
Wait. What. I bet there's more to this then what meets the eye.
@@MrStudabaker No, I'm just saying my mud Mower could never compete with your guys mud mowers.
Rescued a 1450 with a 14hp kohler a couple weeks ago from my local junkyard and i plan to get atv style wheels and tires and make it go much faster for off road just need to find out its lug pattern and what style transmission its got in it
Awesome. How long have you been on the tractor mower scene?
are they still belt drive or is the whole drivetrain different completely
All belt for off road use. It's cheap and easy to make changes.
Pipe Dream needs a full roll cage then it'll look like a buggy
Awe man booo...it's supposed to be a quasi mower.
@MrStudabaker it's badass
@MrStudabaker my dad built mini rail buggies for all of us in the 90's and early 2000's out of off road mowers they are all over Tennessee he built utvs before Polaris had a Polaris ranger they copied us
Super excited to see a transaxle build!
It's going to be interesting.
is that just a pully swap? How do you guys get them to go that fast? I just discovered this amazing hobby! New to the game
Welcome. Mowers are a whoot. Those guys are running a 6" sheave on the motor with a 5" on the transaxle. Some do a 4"on the axle.
Thank you for the video
Looking to build a mower and join yall. Do you guys have a Facebook group ? Im from Remus Michigan
Oh man, that's awesome, and welcome to the club. Remus. Hahaha, I love that little town. There are two pages: Mud mowers from hell Gambler 100 (mower edition) Both are michigan based. Maybe I see you on there.
AWESOME VIDEO THANK YOU FOR THE VIDEO
Great video! Keep them coming!
Awesome job getting fix thank you for the video
I like your creative side the way you were putting that transmission together thank you for the video
Man, dude, this is an honor. Many warm thank yous.
That was awesome when he was kicking up all that mud thank you for the video
Ikr, that mower was a ripper. Are you anywhere close to Michigan?
That was awesome when he was flying through cutting all that grass thank you for the video
Haha, no problems LOVE making trenches all day on a mower. Have you ever been on a super modified mower?
Gaawddd what kind of motors?????
Ikr...F.A.A.F.O. has a built 670 The sears has a slightly warmed over kohler.
Very cool, looks like a good time! Thanks for posting!
Hey thanks, what was the part of the video for you?
I think the wheelies are cool when they take off. Otherwise, it looked to me like a fun get together. The small tire mowers really move out
Yeah the wheelies are the coolest for me as well. Believe it not all those boys run stock mower engines in there dragsters and need all the small tire torque. I'm curious, hows that John Deere treating ya?
I’m really impressed with how tough it is, the John Deere I built. Stock it had a variator belt system. I gutted all that and built a one off pulley system that mimics the way a Wheel Horse one looks. It has the Creepycrawler clutch setup. I did make a couple tweaks like an adjustable back side idler that takes up the slack from belt stretch and wraps the trans pulley more. I honestly didn’t expect it to work so well as it has. The same belt has been on it since day one and still shows no signs of distress. I’ve been gradually abusing it more and more as I’ve gotten more comfortable riding harder. The whole thing besides that is solid, as I expected. I have not had to fix anything or do any maintenance, yet… the Predator 670 has been great so far too. So, no complaints! The only downside is that it’s unique and cost me a few grand plus a ton of hours to build. So with that, I am afraid to really trash on it 😅 like I see some guys doing to theirs I want to build a beater mower at some point that’s not so complicated, has an 820 and is a couple hundred pounds lighter. Thank you for asking!
Ya I know the feeling, Maximus cost the most to build out on my end.
THANK YOU FOR THE VIDEO
No problem and thank you. Can I ask what was your favorite part?
@@MrStudabaker anytime when you guys are climbing rocks or getting in the mud and get stuck or anytime you guys are racing
@@liljoeii6091 Awesome, thank you. I may be able to help with this;)
Awesome video thank you for the video
No problem, was it entertaining enough?
Talk smack, get whacked. Great video cleetus!
Right where the hairs are the shortest hahahaha
Cleetus we love the video. Also see that you put in the one part I love it!!!! Sweet ass video ready for the next one!
Thank you, oh so ready for the cub trans axle build.
You need to make sure you come video the next couple drags for sure , I just beat Chris Willett in a drag race on Feb 3rd 2024 and have to beat him 1 more time to get back on top of the list
I'm down to film this.
Great video man the drags were badass! Im definitely interested and eager to see more cub cadet work!
Thank you, I'm on it like stink on a skunk.
I was just wondering how you were. I am so happy you posted this. Where was Kaizer?
Thank you for asking. I'm doing a whole lot better now. I do hope it shows in this and all the up coming videos. Keizer is getting an update to its motor.
Looks like awesome fun 👌
I'm glad it shows. It was one of the best times.
where are you located. i would like to come out this year
How close are you to West Branch, Michigan?
Pretty far, im in ct@@MrStudabaker
@Never2clean2send ifn you come out this way it will most certainly be more than a day of tractoring expect days of it.
OK thank you @@MrStudabaker
@@Never2clean2send so your in the new england area. I will be out that way filming a mowVenture this summer. Your more then welcome to show up.
That was awesome
Thank you
can someone tell me what keith’s machine runs for a pulley set up ?
My bad didn't ask.
It would be awesome to see Maximus vs that built wheel horse 👍👍
Hmm, I might be able to make that happen.
That mud hole got sheety quick 🎉
What kind of cub was tgat
Quite possibly the most powerful mower on the trails.
👍👍