I've been doing some additional research regarding using / testing various props on the Black Jack 24 V2. One of the You-tube guys, said the "Octura X440 "actually ran pretty well on the boat. I was wondering if you had tried that prop, on the boat? And if so; any issues? I can't keep the boat in the water with the stock prop. I was also thinking. Trim tabs would be really helpful. Thoughts? What would be my options? Thanks for your response, in advance. -Mark-
@FEboats3 күн бұрын
An x440 would be pretty slow, the stock prop is excellent. What actual problems are you having? Maybe post a video. Catamarans don’t need trim tabs not even the terrible ones. What battery packs do you have in it?
@marknickells60973 күн бұрын
I am still trying to feel the boat. I am hooking my turns, and end up dumping the boat. At present I am running two 5000MAH. 50 C , Spekum 2 S ( 4S) run . My 6 S run are two Electron Pro 3S 100 CX2. . The boat is actually more stable, but , the speed is crazy fast. And realistically , too fast. The boat won't stay down, unless I clock back down the power on the TX. . I have taken my Traxas M41 out to 50mph. On the bigger boat, at 50 mph, it's a lot more controllable. With the 6S pack in the Black Jack, V2. I am actually faster than that. But Any wind, or wave, and the boat launces. So, where's the fun in that? And calling for a rescue............. too often? Thanks for the advice ,regarding the prop. I may still try the Octura, just to see what it does? Appreciate the advice. Mark
@FEboats3 күн бұрын
@@marknickells6097 the m41 handles way better than the bj24. You have to make wide turns relatively fast with the bj24 or it’ll flip over. That’s why I just to straight line runs with the bj24 on video. It handles terrible. It’s not a good design like the v1 when it comes to handling.
@marknickells60974 күн бұрын
I had the boat in the water yesterday. The water conditions were not Ideal, and did a lot of "launching. and managed to flip it four times." THE boat is now is now nick -named grasshopper. An observation. I had range issues. Maybe 300 feet out, I started to lose the boat. How are you running over 60MPH. And staying in range? And how are you keeping the boat, in the water at that speed . When I hit 40 with the boat, and doesn't want to lay down. I am thinking trim tabs would be really helpful, and maybe tune down the prop, and do something like a CNC .440 ? What other props have you tested ? I have the original Black jack 24. running a TFL. 438. , and runs on a rail. This Black Jack is using the Black Jack 42 prop, and I think, being hi rake, and and a lifting prop, it's too much for this boat. Do you have any new videos of your 6 S setup? Other prop recommendations? My 3 S battery is The Electron Pro 5200 100 C battery and fit the trays fine. Proboat/ Horizon , did a pretty good job on this. Except for the transmitter. That's my first UPGRADE. Thanks, Mark.
@FEboats4 күн бұрын
The run was only 65mph because of range issues. I installed an sr315 spectrum receiver and dx5 transmitter for more range. I dropped the strut 3mm for all runs. Stock it wasn’t very good. The Vegas version blackjack 24 I have a video of I left everything stock except the prop. I’ve run most of the common props and they all run fine on this hull. The most recent video with the blow over is on 8s. I ran it again yesterday on 6s doing ovals with an abc 1716 and it handled alright. The tfl 438 prop runs good and stays cool on 6s also right around 52-53mph.
@marknickells60975 күн бұрын
She hit the lake today, and was really windy and too much , chop. Did a lot of stunt driving. and some flying, including back stands. I run a cap and a single 4 S batterie. (120 C) , and the boat was a rocket. (Flipped 4 times.), and the 6 S , the lake wouldn't behave. I got one clean 52 mph. run. THE good and the bad. On clean water, it moves. THE bad. And this I don't understand this. . A brand-new, amazing boat. But was paired with the cheapest low power radio they could put in the BOX. And, the range , really sucked. That will need to be addressed. Otherwise, The new Black Jack 24 is a riot to drive. Time to upgrade my batteries. Keep the pedal to the metal.
@FEboats3 күн бұрын
Yeah the radio and servo are terrible but the motor is really nice. I put the stock motor in one of my race boats. Mines running 65mph ovals right now. It’s a handful compared to higher end hulls but still fun nonetheless. Good boat for the $$
@ReceptiveKing935 күн бұрын
I got mines when it first came out & I love it.
@FEboats4 күн бұрын
It’s a fun little boat!
@ReceptiveKing932 күн бұрын
@@FEboats do you think a 6000 mHa 120C battery can fit in there?
@FEboats2 күн бұрын
@@ReceptiveKing93 the tray is meant to fit 139mm pack length. If it’s a standard hard case it should fit. I can fit 9500 cnhl 3s packs without the trays and 6000 4s without them. So pretty much anything reasonable fits if you don’t use the trays.
@600bubba5 күн бұрын
Great video brother Proboat discontinued my favorite boat to bring that one out and I've had such a hatred towards it for so long because of that but the longer that that jet stream has been out it's slowly growing on me and I'm actually now debating on picking one up I don't know if you remember the River jet 23 or 26 inch I have two of them one I have ran one I have not in the thing I like the most about the River jet is that they were self-righting with an OutRunner motor my other issue with the jet stream is is they run 100 amp speed control which is used in The recoil 26 inch that likes to pop when you run 4S could be because of the OutRunner motor but I'm not sure as I've not had a jet stream yet so I'm thinking here in the next 2 months of picking one up
@FEboats4 күн бұрын
It’s fun, the old boat was cool too.
@RDM3DLAB5 күн бұрын
They look like fun! Beautiful lake!!
@FEboats5 күн бұрын
It’s a nice little lake, we actually only have 1 natural lake in San Diego but we’ve got lots of ocean!
@marknickells60976 күн бұрын
Just curios. What batteries were you using on the 6S test. And was this with the stock prop? How did you get the batteries fit on the trays? Awesome vid, by the way. Looking forward to more.
@FEboats5 күн бұрын
Yowoo 60c 3s 5200 soft packs. They fit perfect in the stock tray at 139mm length which is standard size for a 2 or 3s hard pack. They don’t make those packs anymore but I’ve upgraded to their new 5500’s 150c and I’ve run a best of 81 with those. 65mph was with a stock prop on 6s.
@AshtonOlds7 күн бұрын
What’s propeller are you running? I just got this boat a month ago. I’m going to try trim tabs too
@FEboats6 күн бұрын
It’s a modded stock prop. A cnc 4219 was the same speed.
@600bubba13 күн бұрын
Freaking dialed
@RoostersRCGarage13 күн бұрын
What a great run today!!!!
@FEboats12 күн бұрын
Shoulda color graded the video. Can’t get my friends to stop buying Samsungs. 🤦♂️
@RDM3DLAB13 күн бұрын
She souds awesome!! I bet that put a smile on your face!!! Hope you had a great day!!
@FEboats11 күн бұрын
Yeah it’s a great boat, don’t take it out much.
@Frapop13 күн бұрын
Hello, is there a function in the remote control that shows a low battery level or is there another way to show a low battery level? And one more question: is the water shooting function available immediately or do I need to buy something else?
@FEboats13 күн бұрын
There isn’t a way to see battery voltage but you could get a “lipo alarm” to put on the battery to alert you. And yes you need to buy another part to shoot water. I’m running a 3s 2200 spektrum 30c pack from one of my airplanes and I’ve been doing rescues for weeks and it’s still above 70%.
@Frapop2 күн бұрын
@@FEboats It can be powered by a battery with a rating greater or less than 50c, e.g. 45c or 60c ?
@FEboats2 күн бұрын
@@Frapop yes I’m running a 3s 11.1 2200mah 30c spectrum pack from one of my planes. It lasts all day making recovery’s.
@macburgess678513 күн бұрын
Hey great vid. Are you running 6s ? Or 4s just a change in esc?
@FEboats12 күн бұрын
6s only thing changed is esc and prop in this video. Boat got into the 80’s with this setup.
@falcondragonslayer14 күн бұрын
I’ve seen videos of these things on 4S. That already seems like too much power. 6S is ridiculous
@FEboats9 күн бұрын
I have a 4s Vegas (white) and the heatwave on 6/8s now. It handles the power fine in a straight line. The boat doesn’t turn well no matter what so I just use it for speed runs. It’s fun for that.
@alexrex2015 күн бұрын
nice run! that pond gets small quick at that speed doesn't it? lol
@FEboats15 күн бұрын
Sure does!
@alexrex2015 күн бұрын
these are very desirable hulls. they handle race water great and are very competitive in P-Limited racing. my buddy has one that does high 60s on 4S with a Limited 3660 size motor. it eats up waves and wakes.
@FEboats14 күн бұрын
I actually ran a motley crew as a p limited racer when they first came out. Setup with ul-1 motor and rudder. Swapped to a leopard motor later. I’ll post some old videos of it soon.
@shanecornell15 күн бұрын
I just built one and same story, so after ordering a hopped up kit now it needs another $20 in shims. Oh well...
@FEboats14 күн бұрын
After building my Trf 420x kit that cost 1k and then building an Xpress kit that cost $150 I sold the TRF and bought a boat. The xpress has zero slop and went together perfectly.
@600bubba16 күн бұрын
Holy cow lol oops sum gun was hauling ass
@FEboats16 күн бұрын
Yeah, it’s way faster gonna have trouble keeping it on the water.
@600bubba13 күн бұрын
@@FEboats haven't ran my catamarans or boats. In a couple weeks now so I'll pull them out today
@Dr_Jet13 күн бұрын
Planning on Santee Lakes next week. Look me up.
@FEboats13 күн бұрын
@@Dr_Jet just got back from there this minute. I’ll have some video up later.
@8fordhamsRC_adventures18 күн бұрын
Awesome video bro ! Anytime spent running the rc boats is time well spent!!
@FEboats18 күн бұрын
It sure is! Thanks for the comment!
@RDM3DLAB5 күн бұрын
I agree I try and go out every day!! I'm a disabled vet and I'm very new to RC Boats and I'm learning as I go. I have found this hobby has become such an important part of my mental health so I started my own channel looking for tips from others so I can be successful. I love running my boats and leaving my troubles on pause for a few hours so I can clear my head and make better decisions!! #BGFL
@600bubba19 күн бұрын
Oh that Vegas looks so good on the water brother clean run
@FEboats19 күн бұрын
Thanks bro, 1 handed cause my camera died.
@watson989719 күн бұрын
Awesome run! Mine finally came last week. It's truly superior to my red v1, imo and so worth the money. Happy boating!!
@FEboats19 күн бұрын
That’s awesome! It’s a fun boat.
@Rockmixerstar21 күн бұрын
Nice video. No music, no long intro, just plain and to the point!! I like it!! Thanks for sharing and nice boat!
@FEboats21 күн бұрын
Appreciate it!
@tlfunk5121 күн бұрын
nice boat, thanks for sharing.
@RoostersRCGarage22 күн бұрын
Awesome, I'm next and we'll have tug races hahaha
@FEboats22 күн бұрын
I’m waiting! Just so you know I used to race 700 motor hydroplanes before brushless got popular. I still have an old 700bb motor ready to drop in!
@RoostersRCGarage22 күн бұрын
@FEboats I was gonna say how we modding these bad boys hahahaha I'm getting a more powerful deck sprayer 🤣🤣🤣
@FEboats22 күн бұрын
@@RoostersRCGarage I’m taking mine off less weight
@RoostersRCGarage22 күн бұрын
@@FEboats omg stage 1 reduction !!!
@Dr_Jet22 күн бұрын
I sure don't like going under that bridge. Most people see concrete when they see a bridge. I see a huge Faraday cage made out of miles of steel reinforcing bars coated with a thin layer of concrete. I question radio reception when going under and past that bridge.
@FEboats22 күн бұрын
I’ve never had issue. I’m worried about the rocks just below the surface though. Haven’t walked across the bridge to see where they are since I was a kid though.
@Dr_Jet22 күн бұрын
@@FEboats There are some REALLY shallow spots, especially around the big rock at the northeast corner. I've noticed some big rocks near shore as the water cleared up.
@FEboats22 күн бұрын
@@Dr_Jet I’ll check it out before the next run.
@FEboats22 күн бұрын
I don’t but the screw holding the hot racing tabs was stripped and I forgot to replace it so I took them off at the pond. It might work with some adjustments but I didn’t make any yet.
@b_hunna22 күн бұрын
Do you like it without the tabs?
@robertsanata472223 күн бұрын
Hard to find one I don't make it anymore. It's discontinued
@RDM3DLAB25 күн бұрын
Great boat! It looks great
@P.Z-RC25 күн бұрын
Awesome video
@RoostersRCGarage25 күн бұрын
Love the Lucas Oil!! Trying to pick one up!!
@RDM3DLABАй бұрын
Boat looks fast and hes right it is a nice spot.
@FEboatsАй бұрын
Thanks, that was 61mph on that little pull. I’ll have this boat out again soon with a new setup.
@DabrovataАй бұрын
Братан это ебать как быстро, респект
@FloridaRC_AdventuresАй бұрын
Looking good!
@RDM3DLABАй бұрын
hey bud I just ordered the 3660 3250kv for my blackjack 24 V1!! I can't wait to see what kind of speed I'll be able to get
@FEboatsАй бұрын
It should rip on 3s what prop and esc? I’ll be posting a v1 video soon.
@RDM3DLABАй бұрын
@@FEboats ahh ok got it
@RDM3DLABАй бұрын
@FEboats will it take 4s and what esc amps would you recommend? Does high amp esc give you more power?
@RDM3DLABАй бұрын
@@FEboats wow thank you
@600bubbaАй бұрын
Hell yeh man clean run imHigh bidder at 550 on a Blackjack 29 still in box
@FEboatsАй бұрын
Oh man! It’s a good boat. Worth it at that price. Is it a v3?
@600bubbaАй бұрын
@@FEboats yes sir she's mine I messaged the seller and asked what his buy price was we settled on 650 spare hatch along with some props and a bunch of goodies for it to try
@FEboatsАй бұрын
@@600bubba that’s awesome! That’s a lot of $$ but it is what it is. It’s a lot better than the newer rtr’s. Mine mostly sits on the shelf next to my UL-19.
@600bubbaАй бұрын
@@FEboats see I wish I could find a nice condition ul-19 around here the 3 near me have been thrashed and back and they still want 500+ not spending that on a used boat lol did get some back jack v2 vids up today
@FEboatsАй бұрын
@@600bubba awesome I’ll check it out! I’d like to see the BJ29 too.
@eduardonessim4499Ай бұрын
Wowww !!! That was incredible fast !!! How many amp batteries are you using ? Thanks
@FEboatsАй бұрын
They’re brand new yowoo 5500 150c packs off Amazon.
@eduardonessim4499Ай бұрын
@@FEboats Thanks a lot !!!
@600bubbaАй бұрын
If you're wondering why I threw the 120 amp in it it's just like you I don't typically have to sell lipos I have one 2s lectron pro batteries so it's like all my other boats are three and 6s yeah let's just do the 120 amp in it
@FEboatsАй бұрын
I mounted mine with 3m dual lock it fits perfectly and looks stock. I see that blakoon felt faker on your channel. Nice!
@600bubbaАй бұрын
@@FEboats yup me and Kris use to go down and race in Cali before he closed shop I still go down and race in Paris ca every year still have the bmb motor but run a bullet 70cc minarelli hybrid on that same felt lol
@FEboatsАй бұрын
@@600bubba oh awesome man. That’s a nice setup.
@600bubbaАй бұрын
Just picked up both of mine yesterday from my local hobby shop I had him pre-ordered both liveries opened up the heatwave last night and pulled out the spectrum 90 AMP through a spectrum 120 amp we're going on 6s out the box poor sonic wave V2 lol nothing wrong with it's 120 amp speed control but I was getting ready to put a fly color 150 in it knowing that I was going to 6s swap the blackjack 24
@FEboatsАй бұрын
It’s a lot better with the Firma 120. The bj24v2 handles terrible but it goes straight nicely. I’ve got another esc going in mine today.
@FEboatsАй бұрын
Post a video!
@dxfisherАй бұрын
Will original motor run on 6s
@FEboatsАй бұрын
Yes the stock motor handles 6s no problem. Motor is under 110 after these runs. I did make the holes bigger for the water lines in the hull with a body reamer though so they aren’t pinched down.
@dxfisherАй бұрын
Really appreciate the quick response. Got my blackjack 24v2 today Waiting on the esc. Will let you know how it turns out out. Thanks again
@FEboatsАй бұрын
@@dxfisher I hope you like it. A 2200 is a little hot for 6s if you’re doing more than running it like I am. Just watch temps until you’re sure it’s running good and safe. Mine has stayed nice and cool.
@dxfisherАй бұрын
Ran it today temps were really good I do not really run it super hard Man a appreciate your in put I’m coming over for Rc helicopters And this is way different
@dxfisherАй бұрын
Been thinking about upgrading props when you have time I’m open for suggestions and i appreciate your input Thanks again
@Whitemonke37Ай бұрын
Awesome vid bro
@FEboatsАй бұрын
Thank you
@IRONCLADRCАй бұрын
Smoking fast! Nice run!
@FEboatsАй бұрын
Working on it. Stripped servo and blow over in saltwater ended my day early. New esc going in this weekend.
@BrianCarguy-po9hwАй бұрын
I just ordered one seems like a fun RTR boat
@FEboatsАй бұрын
I’m having a lot of fun with mine. For straight line speed I love it so far.
@tylerstewart7284Ай бұрын
What's done to the boat a prop or your running it on 6s ?
@FEboatsАй бұрын
6s octura m545 prop.
@FEboatsАй бұрын
Didn’t get the boat in frame, not my best run but kids screaming in the background. I’ll be back tomorrow.
@daiciuapostol79Ай бұрын
Very well prepared 👍
@MrMad2424Ай бұрын
Looking good!
@FEboatsАй бұрын
Thank you!
@8fordhamsRC_adventuresАй бұрын
Is that stock electronics?!
@FEboatsАй бұрын
It has a Spektrum Firma 120 esc everything else is stock including the prop. Already did a prop swap I’ll have the video up later.
@8fordhamsRC_adventuresАй бұрын
@FEboats that's awesome ! I was like wow how the hell is that 4s esc taking that lol a blonde moment on me haha
@FEboatsАй бұрын
@@8fordhamsRC_adventures some esc’s might handle that. I didn’t specify in the video so all good haha! You thinking about getting one?
@8fordhamsRC_adventuresАй бұрын
How was the overall performance? I run an impulse 32 ( absolutely love my boat ) and I was curious if a longer rudder really makes a difference or not
@FEboatsАй бұрын
It’s makes a big difference in handling but loses speed. Went from 56 to 51 with the same prop. I can carve turns full throttle now though.
Пікірлер
I've been doing some additional research regarding using / testing various props on the Black Jack 24 V2. One of the You-tube guys, said the "Octura X440 "actually ran pretty well on the boat. I was wondering if you had tried that prop, on the boat? And if so; any issues? I can't keep the boat in the water with the stock prop. I was also thinking. Trim tabs would be really helpful. Thoughts? What would be my options? Thanks for your response, in advance. -Mark-
An x440 would be pretty slow, the stock prop is excellent. What actual problems are you having? Maybe post a video. Catamarans don’t need trim tabs not even the terrible ones. What battery packs do you have in it?
I am still trying to feel the boat. I am hooking my turns, and end up dumping the boat. At present I am running two 5000MAH. 50 C , Spekum 2 S ( 4S) run . My 6 S run are two Electron Pro 3S 100 CX2. . The boat is actually more stable, but , the speed is crazy fast. And realistically , too fast. The boat won't stay down, unless I clock back down the power on the TX. . I have taken my Traxas M41 out to 50mph. On the bigger boat, at 50 mph, it's a lot more controllable. With the 6S pack in the Black Jack, V2. I am actually faster than that. But Any wind, or wave, and the boat launces. So, where's the fun in that? And calling for a rescue............. too often? Thanks for the advice ,regarding the prop. I may still try the Octura, just to see what it does? Appreciate the advice. Mark
@@marknickells6097 the m41 handles way better than the bj24. You have to make wide turns relatively fast with the bj24 or it’ll flip over. That’s why I just to straight line runs with the bj24 on video. It handles terrible. It’s not a good design like the v1 when it comes to handling.
I had the boat in the water yesterday. The water conditions were not Ideal, and did a lot of "launching. and managed to flip it four times." THE boat is now is now nick -named grasshopper. An observation. I had range issues. Maybe 300 feet out, I started to lose the boat. How are you running over 60MPH. And staying in range? And how are you keeping the boat, in the water at that speed . When I hit 40 with the boat, and doesn't want to lay down. I am thinking trim tabs would be really helpful, and maybe tune down the prop, and do something like a CNC .440 ? What other props have you tested ? I have the original Black jack 24. running a TFL. 438. , and runs on a rail. This Black Jack is using the Black Jack 42 prop, and I think, being hi rake, and and a lifting prop, it's too much for this boat. Do you have any new videos of your 6 S setup? Other prop recommendations? My 3 S battery is The Electron Pro 5200 100 C battery and fit the trays fine. Proboat/ Horizon , did a pretty good job on this. Except for the transmitter. That's my first UPGRADE. Thanks, Mark.
The run was only 65mph because of range issues. I installed an sr315 spectrum receiver and dx5 transmitter for more range. I dropped the strut 3mm for all runs. Stock it wasn’t very good. The Vegas version blackjack 24 I have a video of I left everything stock except the prop. I’ve run most of the common props and they all run fine on this hull. The most recent video with the blow over is on 8s. I ran it again yesterday on 6s doing ovals with an abc 1716 and it handled alright. The tfl 438 prop runs good and stays cool on 6s also right around 52-53mph.
She hit the lake today, and was really windy and too much , chop. Did a lot of stunt driving. and some flying, including back stands. I run a cap and a single 4 S batterie. (120 C) , and the boat was a rocket. (Flipped 4 times.), and the 6 S , the lake wouldn't behave. I got one clean 52 mph. run. THE good and the bad. On clean water, it moves. THE bad. And this I don't understand this. . A brand-new, amazing boat. But was paired with the cheapest low power radio they could put in the BOX. And, the range , really sucked. That will need to be addressed. Otherwise, The new Black Jack 24 is a riot to drive. Time to upgrade my batteries. Keep the pedal to the metal.
Yeah the radio and servo are terrible but the motor is really nice. I put the stock motor in one of my race boats. Mines running 65mph ovals right now. It’s a handful compared to higher end hulls but still fun nonetheless. Good boat for the $$
I got mines when it first came out & I love it.
It’s a fun little boat!
@@FEboats do you think a 6000 mHa 120C battery can fit in there?
@@ReceptiveKing93 the tray is meant to fit 139mm pack length. If it’s a standard hard case it should fit. I can fit 9500 cnhl 3s packs without the trays and 6000 4s without them. So pretty much anything reasonable fits if you don’t use the trays.
Great video brother Proboat discontinued my favorite boat to bring that one out and I've had such a hatred towards it for so long because of that but the longer that that jet stream has been out it's slowly growing on me and I'm actually now debating on picking one up I don't know if you remember the River jet 23 or 26 inch I have two of them one I have ran one I have not in the thing I like the most about the River jet is that they were self-righting with an OutRunner motor my other issue with the jet stream is is they run 100 amp speed control which is used in The recoil 26 inch that likes to pop when you run 4S could be because of the OutRunner motor but I'm not sure as I've not had a jet stream yet so I'm thinking here in the next 2 months of picking one up
It’s fun, the old boat was cool too.
They look like fun! Beautiful lake!!
It’s a nice little lake, we actually only have 1 natural lake in San Diego but we’ve got lots of ocean!
Just curios. What batteries were you using on the 6S test. And was this with the stock prop? How did you get the batteries fit on the trays? Awesome vid, by the way. Looking forward to more.
Yowoo 60c 3s 5200 soft packs. They fit perfect in the stock tray at 139mm length which is standard size for a 2 or 3s hard pack. They don’t make those packs anymore but I’ve upgraded to their new 5500’s 150c and I’ve run a best of 81 with those. 65mph was with a stock prop on 6s.
What’s propeller are you running? I just got this boat a month ago. I’m going to try trim tabs too
It’s a modded stock prop. A cnc 4219 was the same speed.
Freaking dialed
What a great run today!!!!
Shoulda color graded the video. Can’t get my friends to stop buying Samsungs. 🤦♂️
She souds awesome!! I bet that put a smile on your face!!! Hope you had a great day!!
Yeah it’s a great boat, don’t take it out much.
Hello, is there a function in the remote control that shows a low battery level or is there another way to show a low battery level? And one more question: is the water shooting function available immediately or do I need to buy something else?
There isn’t a way to see battery voltage but you could get a “lipo alarm” to put on the battery to alert you. And yes you need to buy another part to shoot water. I’m running a 3s 2200 spektrum 30c pack from one of my airplanes and I’ve been doing rescues for weeks and it’s still above 70%.
@@FEboats It can be powered by a battery with a rating greater or less than 50c, e.g. 45c or 60c ?
@@Frapop yes I’m running a 3s 11.1 2200mah 30c spectrum pack from one of my planes. It lasts all day making recovery’s.
Hey great vid. Are you running 6s ? Or 4s just a change in esc?
6s only thing changed is esc and prop in this video. Boat got into the 80’s with this setup.
I’ve seen videos of these things on 4S. That already seems like too much power. 6S is ridiculous
I have a 4s Vegas (white) and the heatwave on 6/8s now. It handles the power fine in a straight line. The boat doesn’t turn well no matter what so I just use it for speed runs. It’s fun for that.
nice run! that pond gets small quick at that speed doesn't it? lol
Sure does!
these are very desirable hulls. they handle race water great and are very competitive in P-Limited racing. my buddy has one that does high 60s on 4S with a Limited 3660 size motor. it eats up waves and wakes.
I actually ran a motley crew as a p limited racer when they first came out. Setup with ul-1 motor and rudder. Swapped to a leopard motor later. I’ll post some old videos of it soon.
I just built one and same story, so after ordering a hopped up kit now it needs another $20 in shims. Oh well...
After building my Trf 420x kit that cost 1k and then building an Xpress kit that cost $150 I sold the TRF and bought a boat. The xpress has zero slop and went together perfectly.
Holy cow lol oops sum gun was hauling ass
Yeah, it’s way faster gonna have trouble keeping it on the water.
@@FEboats haven't ran my catamarans or boats. In a couple weeks now so I'll pull them out today
Planning on Santee Lakes next week. Look me up.
@@Dr_Jet just got back from there this minute. I’ll have some video up later.
Awesome video bro ! Anytime spent running the rc boats is time well spent!!
It sure is! Thanks for the comment!
I agree I try and go out every day!! I'm a disabled vet and I'm very new to RC Boats and I'm learning as I go. I have found this hobby has become such an important part of my mental health so I started my own channel looking for tips from others so I can be successful. I love running my boats and leaving my troubles on pause for a few hours so I can clear my head and make better decisions!! #BGFL
Oh that Vegas looks so good on the water brother clean run
Thanks bro, 1 handed cause my camera died.
Awesome run! Mine finally came last week. It's truly superior to my red v1, imo and so worth the money. Happy boating!!
That’s awesome! It’s a fun boat.
Nice video. No music, no long intro, just plain and to the point!! I like it!! Thanks for sharing and nice boat!
Appreciate it!
nice boat, thanks for sharing.
Awesome, I'm next and we'll have tug races hahaha
I’m waiting! Just so you know I used to race 700 motor hydroplanes before brushless got popular. I still have an old 700bb motor ready to drop in!
@FEboats I was gonna say how we modding these bad boys hahahaha I'm getting a more powerful deck sprayer 🤣🤣🤣
@@RoostersRCGarage I’m taking mine off less weight
@@FEboats omg stage 1 reduction !!!
I sure don't like going under that bridge. Most people see concrete when they see a bridge. I see a huge Faraday cage made out of miles of steel reinforcing bars coated with a thin layer of concrete. I question radio reception when going under and past that bridge.
I’ve never had issue. I’m worried about the rocks just below the surface though. Haven’t walked across the bridge to see where they are since I was a kid though.
@@FEboats There are some REALLY shallow spots, especially around the big rock at the northeast corner. I've noticed some big rocks near shore as the water cleared up.
@@Dr_Jet I’ll check it out before the next run.
I don’t but the screw holding the hot racing tabs was stripped and I forgot to replace it so I took them off at the pond. It might work with some adjustments but I didn’t make any yet.
Do you like it without the tabs?
Hard to find one I don't make it anymore. It's discontinued
Great boat! It looks great
Awesome video
Love the Lucas Oil!! Trying to pick one up!!
Boat looks fast and hes right it is a nice spot.
Thanks, that was 61mph on that little pull. I’ll have this boat out again soon with a new setup.
Братан это ебать как быстро, респект
Looking good!
hey bud I just ordered the 3660 3250kv for my blackjack 24 V1!! I can't wait to see what kind of speed I'll be able to get
It should rip on 3s what prop and esc? I’ll be posting a v1 video soon.
@@FEboats ahh ok got it
@FEboats will it take 4s and what esc amps would you recommend? Does high amp esc give you more power?
@@FEboats wow thank you
Hell yeh man clean run imHigh bidder at 550 on a Blackjack 29 still in box
Oh man! It’s a good boat. Worth it at that price. Is it a v3?
@@FEboats yes sir she's mine I messaged the seller and asked what his buy price was we settled on 650 spare hatch along with some props and a bunch of goodies for it to try
@@600bubba that’s awesome! That’s a lot of $$ but it is what it is. It’s a lot better than the newer rtr’s. Mine mostly sits on the shelf next to my UL-19.
@@FEboats see I wish I could find a nice condition ul-19 around here the 3 near me have been thrashed and back and they still want 500+ not spending that on a used boat lol did get some back jack v2 vids up today
@@600bubba awesome I’ll check it out! I’d like to see the BJ29 too.
Wowww !!! That was incredible fast !!! How many amp batteries are you using ? Thanks
They’re brand new yowoo 5500 150c packs off Amazon.
@@FEboats Thanks a lot !!!
If you're wondering why I threw the 120 amp in it it's just like you I don't typically have to sell lipos I have one 2s lectron pro batteries so it's like all my other boats are three and 6s yeah let's just do the 120 amp in it
I mounted mine with 3m dual lock it fits perfectly and looks stock. I see that blakoon felt faker on your channel. Nice!
@@FEboats yup me and Kris use to go down and race in Cali before he closed shop I still go down and race in Paris ca every year still have the bmb motor but run a bullet 70cc minarelli hybrid on that same felt lol
@@600bubba oh awesome man. That’s a nice setup.
Just picked up both of mine yesterday from my local hobby shop I had him pre-ordered both liveries opened up the heatwave last night and pulled out the spectrum 90 AMP through a spectrum 120 amp we're going on 6s out the box poor sonic wave V2 lol nothing wrong with it's 120 amp speed control but I was getting ready to put a fly color 150 in it knowing that I was going to 6s swap the blackjack 24
It’s a lot better with the Firma 120. The bj24v2 handles terrible but it goes straight nicely. I’ve got another esc going in mine today.
Post a video!
Will original motor run on 6s
Yes the stock motor handles 6s no problem. Motor is under 110 after these runs. I did make the holes bigger for the water lines in the hull with a body reamer though so they aren’t pinched down.
Really appreciate the quick response. Got my blackjack 24v2 today Waiting on the esc. Will let you know how it turns out out. Thanks again
@@dxfisher I hope you like it. A 2200 is a little hot for 6s if you’re doing more than running it like I am. Just watch temps until you’re sure it’s running good and safe. Mine has stayed nice and cool.
Ran it today temps were really good I do not really run it super hard Man a appreciate your in put I’m coming over for Rc helicopters And this is way different
Been thinking about upgrading props when you have time I’m open for suggestions and i appreciate your input Thanks again
Awesome vid bro
Thank you
Smoking fast! Nice run!
Working on it. Stripped servo and blow over in saltwater ended my day early. New esc going in this weekend.
I just ordered one seems like a fun RTR boat
I’m having a lot of fun with mine. For straight line speed I love it so far.
What's done to the boat a prop or your running it on 6s ?
6s octura m545 prop.
Didn’t get the boat in frame, not my best run but kids screaming in the background. I’ll be back tomorrow.
Very well prepared 👍
Looking good!
Thank you!
Is that stock electronics?!
It has a Spektrum Firma 120 esc everything else is stock including the prop. Already did a prop swap I’ll have the video up later.
@FEboats that's awesome ! I was like wow how the hell is that 4s esc taking that lol a blonde moment on me haha
@@8fordhamsRC_adventures some esc’s might handle that. I didn’t specify in the video so all good haha! You thinking about getting one?
How was the overall performance? I run an impulse 32 ( absolutely love my boat ) and I was curious if a longer rudder really makes a difference or not
It’s makes a big difference in handling but loses speed. Went from 56 to 51 with the same prop. I can carve turns full throttle now though.