Why is the fiberglass sheet i between two boards? It will add no protection, someone explain please 😇
@geozantrox666Ай бұрын
What is that sort of squeezing bag you use for the glue?? Could i use it for squeezing putty or filler between two panel
@mcsmith76062 ай бұрын
Is the bottom of the stringer beveled to match the hull or square?
@trentonbriones23812 ай бұрын
Hey I saw your guys channel I love it! Any updates about the boat?
@73roadrunner13 ай бұрын
weak joints
@Eudox621463 ай бұрын
What material is used for those board stringers... Is it XPS Foam Boards ??
@therukugorillazaotearoa_3 ай бұрын
What's the thickness off coosa stringers
@Resistculturaldecline3 ай бұрын
Thats how i do my knee braces, transom panel, and stringers, but with considerably lighter-weight core boarding because im not working on wave jumpers. This video is how most people think their boat is built, but only a small percentage of builders apply that level of workmanship and understanding of forces.
@bobmontgomery77384 ай бұрын
Should have use the Rosebud and heat that aluminum up
@TheNomad355 ай бұрын
Good video.. but the title is a bold claim.. I think "Wicked Wanda" has stronger stringers.. check into it.. I'm curious if you disagree. Still, good video!
@chuckaddison51348 ай бұрын
Just found this video, lot of good information, however I found the music irritating as it interfered with being able to hear the narration.
@user-sp6vp1zf8b9 ай бұрын
I suspect a few ponies were left in the stable. Let these girls loose:)
@sixty6chevy10 ай бұрын
wow, great work. my fishing boat is next
@jaymcnab557910 ай бұрын
I have to aggree the music is way too loud and distracting from the great content of your video.
@thomasdunphy9312 Жыл бұрын
You need to drop the annoying music music. I subscribed and then canceled when all of that loud music come on.
@jojinapigkit4680 Жыл бұрын
what board did you use in your stringer? thanks
@aliciarobbinstherealtor Жыл бұрын
Nice work is there a finished result video?
@pinnedit Жыл бұрын
What board did you run? I just hear loud music . What kind of resin did you use ? Parts list would be nice
@nwmi493 Жыл бұрын
resins prices have gotten waaaaay to high . stupid how expensive it is to supply a project with material thesis days
@wadmandriftteamneversettle1790 Жыл бұрын
Awesome video. You should talk to the camera a little bit throughout the day and see if you can edit that in on the next one!!
@donedealracingDDR Жыл бұрын
We will work on that. Thks.
@ramonaandbrettfeldberg6938 Жыл бұрын
I can't even have the sound on the music is so loud and bad not in a good way
@joseburgos5106 Жыл бұрын
Fantastic job! What the name of the glue you put on the board; kinda like caulking?
@donedealracingDDR Жыл бұрын
Cabosil mixed with resin to the consistency you’d like!
@joseburgos5106 Жыл бұрын
Thanks for the reply. I will be doing this soon on my 198125' Sea Ray Amberjack. The sun got the floor cracked but this project looks somehow fun to me to do. I wonder what people would charge to redo a floor like this. Again, thank you so much!
@roblescurbappealconcrete Жыл бұрын
Y’all have done an amazing job. Your dad has a heck of an imagination. Really enjoyed the videos.
@jasonbasti5060 Жыл бұрын
Fuck ya 🔥🔥🔥
@bobbobson4607 Жыл бұрын
Either get rid of the "music" or at least reduce the volume of it by half. I can't hear you speak when I have the volume at a comfortable lever because the music is so loud.
@kuzz7919 Жыл бұрын
Keep up the good work girls. Keep an open mind and learn from your experiences!
@frankvecce9067 Жыл бұрын
The entire Papp Family are Rock stars. I love seeing the girls grow and progress in all the do. I live and miss them all i hope to see them in person Racing.I gotta get another shirt and a autographed photo of each 👍❤️❤️❤️😎
@donedealracingDDR Жыл бұрын
We can make that happen 😎
@brandonthorbahn2405 Жыл бұрын
Those hot rod skiffs and cats will is building are too cool. The big block rat fink boat is awesome.
@djmjr77 Жыл бұрын
Any updates?? Very cool project!!
@stevejackson4136 Жыл бұрын
House full of girls. I have 3. 👍
@user-ln6nj1fs4p Жыл бұрын
⛵👍💪🤝👏
@stevejackson4136 Жыл бұрын
Excellent work
@stevejackson4136 Жыл бұрын
What epoxy are you using?
@GULFZILLA Жыл бұрын
What are you mixing cabosil with? Fiberglass resin or epoxy?
@sbuzz5889 Жыл бұрын
good content kill the music or adjust your edit volume and ill watch with more interest
@jkg6211 Жыл бұрын
Lower the music, please! It's hard to understand you.
@spaken2768 Жыл бұрын
What material are the stringers made of?
@jkg6211 Жыл бұрын
Looks like Coosa Board.
@robertnjarman2 жыл бұрын
How is the boat coming along, excellent videos.
@kimkeam20942 жыл бұрын
Wish you guys were in Australia. Brilliant workmanship. Well done and thanks, I learned a lot!
@lovetofly322 жыл бұрын
You gotta re edit this video and repost it. That music makes is unwatchable. You have to turn it down when you're not talking then turn it back up to hear what you're saying. The music is worse than nails on a chalkboard
@dankoferber23002 жыл бұрын
bad choice of music. good video...
@jameslawson81932 жыл бұрын
I wish you still made videos like this. I would Love to see the end results
@douglasashby43492 жыл бұрын
Those electric scissors are brilliant have used them for a year
@codyanastasoff70902 жыл бұрын
Any progress on the boat?
@baba_jab98982 жыл бұрын
I really wanted to watch this but this music is seriously annoying.
@HazardPerformance2 жыл бұрын
Hope to see some updates in the near future!!! Love the build
@rossrobichaux94252 жыл бұрын
What are you building the bulkheads out of?
@larrymoehlenkamp56262 жыл бұрын
Y did this race boat build come to a end ?
@ricemadd2 жыл бұрын
Great video, thanks for sharing! What is the core material?
Пікірлер
You apply the fiberglass to the wet cavasilk
Why is the fiberglass sheet i between two boards? It will add no protection, someone explain please 😇
What is that sort of squeezing bag you use for the glue?? Could i use it for squeezing putty or filler between two panel
Is the bottom of the stringer beveled to match the hull or square?
Hey I saw your guys channel I love it! Any updates about the boat?
weak joints
What material is used for those board stringers... Is it XPS Foam Boards ??
What's the thickness off coosa stringers
Thats how i do my knee braces, transom panel, and stringers, but with considerably lighter-weight core boarding because im not working on wave jumpers. This video is how most people think their boat is built, but only a small percentage of builders apply that level of workmanship and understanding of forces.
Should have use the Rosebud and heat that aluminum up
Good video.. but the title is a bold claim.. I think "Wicked Wanda" has stronger stringers.. check into it.. I'm curious if you disagree. Still, good video!
Just found this video, lot of good information, however I found the music irritating as it interfered with being able to hear the narration.
I suspect a few ponies were left in the stable. Let these girls loose:)
wow, great work. my fishing boat is next
I have to aggree the music is way too loud and distracting from the great content of your video.
You need to drop the annoying music music. I subscribed and then canceled when all of that loud music come on.
what board did you use in your stringer? thanks
Nice work is there a finished result video?
What board did you run? I just hear loud music . What kind of resin did you use ? Parts list would be nice
resins prices have gotten waaaaay to high . stupid how expensive it is to supply a project with material thesis days
Awesome video. You should talk to the camera a little bit throughout the day and see if you can edit that in on the next one!!
We will work on that. Thks.
I can't even have the sound on the music is so loud and bad not in a good way
Fantastic job! What the name of the glue you put on the board; kinda like caulking?
Cabosil mixed with resin to the consistency you’d like!
Thanks for the reply. I will be doing this soon on my 198125' Sea Ray Amberjack. The sun got the floor cracked but this project looks somehow fun to me to do. I wonder what people would charge to redo a floor like this. Again, thank you so much!
Y’all have done an amazing job. Your dad has a heck of an imagination. Really enjoyed the videos.
Fuck ya 🔥🔥🔥
Either get rid of the "music" or at least reduce the volume of it by half. I can't hear you speak when I have the volume at a comfortable lever because the music is so loud.
Keep up the good work girls. Keep an open mind and learn from your experiences!
The entire Papp Family are Rock stars. I love seeing the girls grow and progress in all the do. I live and miss them all i hope to see them in person Racing.I gotta get another shirt and a autographed photo of each 👍❤️❤️❤️😎
We can make that happen 😎
Those hot rod skiffs and cats will is building are too cool. The big block rat fink boat is awesome.
Any updates?? Very cool project!!
House full of girls. I have 3. 👍
⛵👍💪🤝👏
Excellent work
What epoxy are you using?
What are you mixing cabosil with? Fiberglass resin or epoxy?
good content kill the music or adjust your edit volume and ill watch with more interest
Lower the music, please! It's hard to understand you.
What material are the stringers made of?
Looks like Coosa Board.
How is the boat coming along, excellent videos.
Wish you guys were in Australia. Brilliant workmanship. Well done and thanks, I learned a lot!
You gotta re edit this video and repost it. That music makes is unwatchable. You have to turn it down when you're not talking then turn it back up to hear what you're saying. The music is worse than nails on a chalkboard
bad choice of music. good video...
I wish you still made videos like this. I would Love to see the end results
Those electric scissors are brilliant have used them for a year
Any progress on the boat?
I really wanted to watch this but this music is seriously annoying.
Hope to see some updates in the near future!!! Love the build
What are you building the bulkheads out of?
Y did this race boat build come to a end ?
Great video, thanks for sharing! What is the core material?