Пікірлер

• 
  @mosswareproaudio63283 ай бұрын

  How do these Diopters work on normal lenses?

• 
  @cinesagaltd3 ай бұрын

  Exactly the same as they do here! Think of a diopter like a single lens from a pair of reading glasses, that can be used on any lens.

• 
  @jimmoss95843 ай бұрын

  Great. I own a few.

• 
  @pierrecastillothelifeofpierre9 ай бұрын

  Hi sir! Please share your knowledge with this anamorphic set up. It’s a piece of artwork! God bless

• 
  @BillPutnamPhoto11 ай бұрын

  Hi, I used the calculator today and have a couple of questions: 1) What lens should I put in measurements for the “Lens’ Current Close Focus,” the anamorphic? Am I using the anamorphic's close focus or what I have set it at? Thanks. Love the calculator.

• 
  @orangerocketproductions Жыл бұрын

  Can the rubber donut at the back hold a polarizer filter, and can this be turned using the grips on the outside? Just wondering if I can use this as a 4th stage pola in addition to the three filters up front...

• 
  @orangerocketproductions Жыл бұрын

  @@cinesagaltd Thank you, I appreciate your answer. I though that the 360 Rota Pola tray is in the "ONE" tray which takes up two spots of the 3... so using that still leaves me with only 3 spots... Trying to have lens filtration, Grad ND, regular ND, and CP in one matte box. Any suggestions on how to do this?

• 
  @cinesagaltd Жыл бұрын

  @@orangerocketproductions I’ve deleted my previous reply as I made a mistake. The rubber donut does indeed hold a Rota Pola. I thought you were talking about the rubber Black Hole. So yes three solid filters and a Rota Pola at the back is possible.

• 
  @orangerocketproductions Жыл бұрын

  @@cinesagaltd Thank you so much for checking! Is the ROTA actually rotatable from the outside to be able to drop a CP and control from outside? Do you have one in hand you could post to show how it works? NOWHERE does anyone talk about how the 360 is actually expandable to a 4-stage box... It's a hidden feature. I'd also be really interested in how this would work with a 15MM full frame lens - do you have an idea what the widest lens would be that would work with donut and all 4 filters in front?

• 
  @cinesagaltd Жыл бұрын

  @@orangerocketproductions Heya. I believe you can turn it in the back by loosening the bit that holds it in place but I haven’t personally used it this way. Also can’t say what the widest would be but I doubt you could use 4 stages with a 15mm FF lens. If your local rental house or camera shop has one you can test I think that would make sense so you can get it in your hands and answer some of these questions. Hope you get to the bottom of it!

• 
  @orangerocketproductions Жыл бұрын

  @@cinesagaltd If I can't turn the CP in the donut it won't really work... thanks for confirming! I'll have to hunt for a local rental house that has it in... thanks again for your help!

• 
  @pixelreflexmedia Жыл бұрын

  We received our Misfit Kick 3-Stage Matte Box 114mm Clamp-On Kit with other accessories to fit our Canon glass. It's absolutely amazing. So incredibly light and well-built. Bright Tangerine's customer service was outstanding, helping us pick what made sense to us and not upselling what we didn't need at the moment. We received it from the UK without issue and days faster than other local U.S. manufacturers. It's truly an amazing piece of hardware.

• 
  @BrightTangerine Жыл бұрын

  Glad you're liking the Misfit Kick, appreciate your support.

• 
  @coreybeebe2398 Жыл бұрын

  How does the side flags go on???

• 
  @cinesagaltd Жыл бұрын

  They screw into the matte box the same way the top flag does, super simple.

• 
  @furkonige Жыл бұрын

  thank you so mucho for the information, I am saving money to buy your anamorphic course, greetings

• 
  @cinesagaltd Жыл бұрын

  That's amazing! Thanks so much and hope to see you inside soon.

• 
  @yothomasbarnes Жыл бұрын

  This is a fantastic video - thankyou for going through everything in detail.

• 
  @cinesagaltd Жыл бұрын

  Pleasure Thomas, thanks for watching! Glad it was helpful.

• 
  @kmovfilms2 жыл бұрын

  Off topic here, but What is the Kembervision lens? Assuming that is an anamorphic element, but what is it and where from? Also curious where your variable diopter is from.

• 
  @cinesagaltd Жыл бұрын

  Hey! Just saw your comment here. It's a custom lens I put together as my workhorse anamorphic set. The engraving is just a bit of fun. Head to CineSaga.com to get an overview of what it takes to put a set of anamorphic lenses together. Any questions, drop me an email there. Thanks!

• 
  @felixsimardt2 жыл бұрын

  Do you know if there’s a way I can use a +3 diopter with the misfit and the one tray? Even if it’s unorthodox, like putting the +3 alone in the one tray, then putting it at the front of the mattebox and adding the standard tray behind it?

• 
  @cinesagaltd2 жыл бұрын

  Good question! Sadly not as the mechanism that holds the diopter firmly in place would touch the glass. A +3 would have to go in a donut behind the matte box or some other solution!

• 
  @felixsimardt2 жыл бұрын

  @@cinesagaltd Ok thank you very much! Get back doing videos plz :)

• 
  @idrisso.g.63163 жыл бұрын

  Super Detailed and informative in any aspect. Thanks for this

• 
  @wojciechszuster65283 жыл бұрын

  This channel is way underrated. Thank U for this one.

• 
  @cinesagaltd3 жыл бұрын

  Thanks for stopping by! Glad you enjoyed it, appreciate the comment.

• 
  @AnamorphicOnABudget3 жыл бұрын

  That's a really good review for an awesome mattebox. Now I'm tempted, although i can hardly justify the expense! :P

• 
  @cinesagaltd3 жыл бұрын

  Cheers Tito! Haha :)

• 
  @BrightTangerine3 жыл бұрын

  This will be a great resource for anyone looking to invest in a matte box.

• 
  @marksmello3 жыл бұрын

  Amazing review!!! Thank you for this in-depth information. Certainly helps make a purchasing decision for those interested. Very well put together

• 
  @cinesagaltd3 жыл бұрын

  Hey Mark - thanks for the support! Glad you found it useful. All the best.

• 
  @Dstonephoto3 жыл бұрын

  Academic cringe 🙈

• 
  @mark123456973 жыл бұрын

  300 pounds is insane for a video course. There is literally a guy called tito who's basically doing it for free.

• 
  @ZvilgantisKailis3 жыл бұрын

  An anamorphic lens should come with the course for that price.

• 
  @mark123456973 жыл бұрын

  @@ZvilgantisKailis Nope

• 
  @KillingTheMost2 жыл бұрын

  @@ZvilgantisKailis 🙄🙄🙄

• 
  @cathyye32633 жыл бұрын

  So clear and easy to understand!! This was fantastic. Thank you for sharing your expertise!

• 
  @cinesagaltd3 жыл бұрын

  Thanks for the lovely feedback!

• 
  @bensayswords3 жыл бұрын

  Brilliant stuff. Should have more views!

• 
  @cinesagaltd3 жыл бұрын

  Thanks very much Benjamin! We're a brand new company and channel with lots more to come, so stay tuned! Cheers.

• 
  @123amalmr3 жыл бұрын

  Hi.. whats name of font u used in thumbnail.. i am searching for more than a month. Please tell me .. Btw nice video

• 
  @francisb49863 жыл бұрын

  There is a Website called: whatsthefont. You can Upload a Screenshot from the Font and it will tell you what it is

• 
  @al_muftah943 жыл бұрын

  Would a +1 diopter work with a liner ND filter ?

• 
  @cinesagaltd3 жыл бұрын

  I'm not sure what you mean by 'liner ND' but yes, you can use diopters with NDs, no problem! It's certain polarisers with certain Vari NDs that has issues.

• 
  @al_muftah943 жыл бұрын

  @@cinesagaltd sorry I meant 4x5.65 Nd filter with diopter. Cuz I spoke to bright tangerine and they said I can’t use 4x5.65 ND with +2 & 3 diopters. So far they said +1 diopter may work & anything smaller will with their misfit pola+

• 
  @cinesagaltd3 жыл бұрын

  @@al_muftah94 Within the ONE tray in this video, you can use a diopter up to a +3/4, and also still use a 4x5.65 filter of any kind. Any diopter stronger like a +1 or +2 has to be used in the ONE tray on its own. I haven't covered the Pola + in this video and haven't tested that, so I'll default to them on that one! Cheers.

• 
  @blahblahblah22433 жыл бұрын

  looks like you are using the FVD35A...how do you keep it from bumping your filters when using the mattbox? I figure the Mattbox would have to be far enough away to cause vignetting?

• 
  @cinesagaltd3 жыл бұрын

  I developed a custom piece for the 35A that prevents the nose protruding. Drop me a line at [email protected] and I'll share the info. Cheers!

• 
  @marksmello3 жыл бұрын

  Loved this video! Extremely informative. Thank you for your knowledge + sharing!

• 
  @cinesagaltd3 жыл бұрын

  Thanks Mark! Glad you enjoyed it.

• 
  @ForestCinema3 жыл бұрын

  Nice! What size diameter rear do you use to attach the Kick to the FVD-35? Looking to order one through their Black Friday deal but not sure which to get.

• 
  @cinesagaltd3 жыл бұрын

  It's a third party piece. I'll drop you a line on FB about it. :)

• 
  @ForestCinema3 жыл бұрын

  @@cinesagaltd you’re the best, thanks!

• 
  @BrightTangerine3 жыл бұрын

  @@ForestCinema let us know if you need any assistance on the Misfit Kick. I believe the custom adapter used here goes to 143mm.

• 
  @BrightTangerine3 жыл бұрын

  Great explanation Oli, for Black Friday, get a free ONE Tray with Misfit Kick matte box bundles. Ends Monday - www.brighttangerine.com/store/misfit-kick-black-friday-kit-free-one-tray/