Пікірлер

• 
  @AnnetteMaskrey7 күн бұрын

  Hi your video is helpful but I still cannot locate the main fuse found f1 and f2 but tried to find it. Thank you

• 
  @Ron_A._Bolton7 күн бұрын

  @@AnnetteMaskrey is it not on the board where I show in the video?

• 
  @AnnetteMaskrey7 күн бұрын

  I found 2 fuses but are there 3? I see 2 on board which you pointed out, I thought there were 3. Kind regards Annette maskrey. Thank you

• 
  @Ron_A._Bolton7 күн бұрын

  @@AnnetteMaskrey there might be 3, however unfortunately I cannot check as I don't have the machine any more.

• 
  @Ron_A._Bolton6 күн бұрын

  There are 3 fuses, two together and a third over by the connectors, all three can be seen in the still shot overlay of the board. F1 is one of the two fuses together, do not worry about the third one on its own.

• 
  @thecinamadicguy830822 күн бұрын

  is there a way to downlead what you have

• 
  @Ron_A._Bolton22 күн бұрын

  @thecinamadicguy8308 I could put it up for download, but have moved on quite a bit from where I was at this introductory stage. Let me know.

• 
  @unclealig2 ай бұрын

  sorry, whats that in the grey bottle. you call it CLR? is it just pure vinegar? thanks

• 
  @Ron_A._Bolton2 ай бұрын

  CLR us a product, stands for Calcium Lime Rust. Works great for removing rust or stains in places like the toilet bowl.

• 
  @Ausieheretic2 ай бұрын

  Stary strong, mate

• 
  @Ron_A._Bolton2 ай бұрын

  Thanks buddy.

• 
  @helicopterovirtual-msfs62543 ай бұрын

  Excelente 👏

• 
  @maity7873 ай бұрын

  very nice love it

• 
  @Ausieheretic4 ай бұрын

  Sorry to hear all this, Ron. I hope that you gonna recover soon and get better 😊

• 
  @nathanVPDU4 ай бұрын

  Keep fighting the good fight Ronny.

• 
  @maggiemonte4 ай бұрын

  You’re looking really well here Ron, hope it continues and your fingers get back to normal too.

• 
  @Ron_A._Bolton4 ай бұрын

  Thank you.

• 
  @nathanVPDU4 ай бұрын

  Keep on charging Ronny! You got this mate.

• 
  @Ron_A._Bolton4 ай бұрын

  Thanks Nate

• 
  @TheManoylenko4 ай бұрын

  It’s not a smart thing to do, increase the length of the handle, thereby reducing the stroke of an already bad joystick, bravo)))

• 
  @Ron_A._Bolton4 ай бұрын

  If you say so.

• 
  @JesusAmaTeMeninoАй бұрын

  It will increase the wear of parts due to the extra force applied via lever physics. BUUUUUT it is a precision equipment. You're supposed to use it in a gentle way and never swing it wildly. It should be fine for many years. I'll just do the same really. Neat project!

• 
  @JesusAmaTeMeninoАй бұрын

  Also, the 3d pro is not a bad stick, my guy. It just more fragile because the parts are cheap. It's a solid option for having fun

• 
  @user-xm5dn5pm7g5 ай бұрын

  Thank you so much for making this video!

• 
  @YourDailyHopeandEncouragement5 ай бұрын

  Hey there! I just stumbled upon your KZread-recommended vlog, and I have to say, I was thoroughly impressed by your communication style. Your focus on building self-control, staying motivated, and maintaining consistency really resonates with the topics I cover on my own channel. Like you, I'm dedicated to empowering and inspiring my audience with practical advice. Your unique perspective and clear delivery have convinced me to hit that subscribe button. Keep up the fantastic work-you're truly making a difference!

• 
  @007cttina5 ай бұрын

  This was a tremendous video. I’m 62 and was able to fix my mom’s Janome. 😊😊😊. Do you happen to work on Juki sewing machines? I need a video on how to take a Hzl-k85 apart.

• 
  @Ron_A._Bolton5 ай бұрын

  I am so glad the video helped. I fix a lot of machines and electronics , Unfortunately I have not worked on the HzHk85 so I cannot reply help. Thank you for the comment.

• 
  @franksidebottom1875 ай бұрын

  Hi Ron, Great tutorial. I have one issue though. Engine 2 will not shut down. Everything else works as it should including feathering. Engine 2 condition levers are set up exactly as condition lever 1 which shuts down engine 1 properly. I started from a new empty profile so there should be no conflicts. I'm not sure if this is a default Asobo king air issue or something else. All assignments show as working in the control config screens. Tried deleting and re-assigning to no avail. Any ideas please?

• 
  @Ron_A._Bolton5 ай бұрын

  Hi, I did find it difficult to adjust engine 2, I just kept trying different settings till it worked.

• 
  @franksidebottom1875 ай бұрын

  Thanks Ron. I'll keep trying. I'll try a different aircraft too. Puzzling thing is that all levers in the aircraft go to the correct positions and all show as working correctly in the setup screens. I'll keep trying because apart from that it works perfectly. @@Ron_A._Bolton

• 
  @franksidebottom1875 ай бұрын

  Just to let you know, I started again from scratch and went through the setup again. This time it all worked perfectly, including Feathering, reverse, condition levers and engine cut off etc. I must have had a conflict somewhere originally. Your comment prompted me to try again so thanks for that. Again thanks for a great setup tutorial for Turboprops. 😄

• 
  @Ron_A._Bolton5 ай бұрын

  @@franksidebottom187 fantastic news, well done. I'm glad you got it sorted, enjoy flying.

• 
  @franksidebottom1875 ай бұрын

  A bit of an update. Unfortunately the issue came back like a bad smell. However after a bit of messing with the control assignments and some 'funky' behaviour with the in cockpit levers, I managed to track it down to an issue with the #2 engine fuel valve assignment. If I had it assigned as it should be (same as #1) engine #2 will keep running even after putting the aircraft in a supposedly cold and dark state. Weird! My fix is as follows: I cleared the 'toggle fuel valve' settings for both engines, then I tried the shut down procedure again using just the 'condition lever cut off' assignments. This time both engines shut down correctly. Of course, the fuel valves would still be open. So, in the Fuel options, I just assigned the condition lever #1 detent button to 'Toggle All Fuel valves'. This worked. It's not ideal as the valves should be operated independently but at least now I can shut down both engines. Everything else works as per your tutorial. What the root cause is I don't know, but the above is a workaround that works for me. hopefully it may help others out too who may experience a similar issue. Here's an unrelated tip: If you find that the prop levers go full forward after coming out of the feather state, assign props 1&2 to 'Propeller Pitch Hi' but make sure to set the action to 'On release'. You may have to check the action as it doesn't always do it the first time. I got that tip from Mark of SimHanger Flight Simulation so many thanks to him for that one. @@Ron_A._Bolton

• 
  @fionalindgren60656 ай бұрын

  Ron, try biotene a dry mouth spray, it may help. Can get it from the chemist

• 
  @chuckyhotfire6 ай бұрын

  Love ya dad

• 
  @Ron_A._Bolton6 ай бұрын

  Thanks, so tired ATM I'm a week behind on video posts, I'll catch up tomorrow I hope.

• 
  @aussiecams6 ай бұрын

  So sorry to hear this Ron! Fingers crossed 🤞all goes well 🙏

• 
  @plaxicoshak6 ай бұрын

  I came here to write the exact thing as @user-py6ip1yl9y did! Took the words right off my fingertips! Thank you so much. Would you happen to have a vid or settings for your assignments with the Alpha for the KA350. Gets a bit confusing with the trims, whether mechanical or servo and all that. Again thanks though!!

• 
  @Ron_A._Bolton6 ай бұрын

  Sorry I actually don't have an Alpha.

• 
  @jerryrueda7 ай бұрын

  Be strong my friend

• 
  @fionalindgren60657 ай бұрын

  You’re a brave guy, you can beat this. Love Fi

• 
  @slicker557 ай бұрын

  Hello Ron, fellow Bravo fixer here... great video... hats off to you for going in as deep as you did but just wanted to let you and other viewers know that you don't need to remove the shaft and all the levers... as you discovered, on each lever there are two small screws and one adjuster screw held in place with a lock nut. As you probably know, the adjuster screw creates a bit of resistance when the lever travels from idle to fully closed. Anyway, if you remove all three, you can gently ease the lever off the shaft making it much easier and quicker to do the repair. Afterwards, reassemble, adjust the adjuster screw using a small allen key to hold the adjuster screw and tighten the lock nut with a suitable spanner. Another tip for you to consider if/when you need to repair any of the other wires, connect the new wire direct to the terminal and then you only need to join the new wire to the original... much neater and in my experience easier as there is very little room inside the lever housing. More information outlining my Bravo repairs in the comments section below KZread by 2020 fs'ers who, to his credit gave me the confidence to attempt the job in the first place. (kzread.info/dash/bejne/loZhs7exeNqXn6Q.html )

• 
  @Ron_A._Bolton7 ай бұрын

  Thanks for the tip, I know I looked at that, but for some reason didn’t go that path, I'll check it out next time as I know there will be. A next time.

• 
  @slicker557 ай бұрын

  @@Ron_A._Bolton you're welcome

• 
  @user-vj1lu3kb3o8 ай бұрын

  Excellent video, very helpful. Have completed the repair having found 5 broken wires! What was your secret for getting the circlip back on? With the two washers on the rod cannot see the slot for the circlip yet everything looks correctly positioned and closed up. Have tried changing the position of the tensioner but not enough movement. I know its tight but.......

• 
  @Ron_A._Bolton8 ай бұрын

  Ah yes, the circlip, this was my second time fixing it, the first time the circlip broke, this time it was ok, there is a groove in my shaft, but I'm not sure about all versions.

• 
  @user-vj1lu3kb3o8 ай бұрын

  Yes have the groove but with two washers on it is covered. Circlip went on with just the metal washer and all seems ok. Hope Honeycomb will modify for future sales!

• 
  @carolinelupul432511 ай бұрын

  Excellent, excellent video which saved me a lot of time and money getting my Janome Memory Craft 4900 repaired. I also received an Error 1 message every time I turned on my machine and getting it serviced in my small community is out of the question as it requires a three hour drive one way and a five-month wait. Your video enabled me to do the fuse replacement myself and I also serviced the machine myself as I have enrolled in an online course so that I can service my three different Janome machines myself. Thank you so much😊

• 
  @Ron_A._Bolton11 ай бұрын

  Glad it helped you out.

• 
  @bethanyrylaarsdam655611 ай бұрын

  Thank you! You saved me an expensive repair. It was difficult to track down the fuse, but once i found it the repair was simple by following your instructions!

• 
  @andriuskaunas3714 Жыл бұрын

  Thank you very much, you helped me. Health to you and good luck!👍

• 
  @rossirossi9778 Жыл бұрын

  very interesting and cleaver Ron. Did you try to setup the new LoupDeck Live that has 6 incremental knobs. Thak to schare this idea and configuration

• 
  @Ron_A._Bolton Жыл бұрын

  Hi, I have not had the opotunity to test that unit yet.

• 
  @cengiz4468 Жыл бұрын

  After last fs2020 avionics update it doesn’t work. Any suggestions?

• 
  @Ron_A._Bolton Жыл бұрын

  Hi, it's working on mine after the update, did a flight yesterday in the 787. Are you using the Heavy mod? The PMDG 737, partially works but has always been like that. Hype, H145 only partially works since they changes to the Asobo flight model. The controls work, but not the displays, well not for all. IAS for one does not display. What is not working for you, and what aircraft?

• 
  @cengiz4468 Жыл бұрын

  Thank you for your answer. 787 not heavy mode. Previously, when starting from cold and dark gate or starting directly from runway, all controls were running except HDG. At the moment, the ALT, HDG, IAS and most importantly the NAV key does not work.

• 
  @cengiz4468 Жыл бұрын

  Done, I solved 😊

• 
  @Ron_A._Bolton Жыл бұрын

  @@cengiz4468 Fantastic , you should try the Heavy mode, also works with the 787-8. In my video series I provide a free check list too. You will have a lot more fun with that mod applied.

• 
  @WiJazz54ref Жыл бұрын

  Tijdje bezig geweest om de juiste uitleg te vinden op KZread . Bedankt voor je geweldige uitleg . Duidelijke uitleg om met de plug-ins een programma te maken op de stream deck .

• 
  @Ron_A._Bolton Жыл бұрын

  Bedankt dat je de tijd hebt genomen om te liken en een reactie achter te laten. Ik ben blij dat de video nuttig voor je is, veel plezier met vliegen!

• 
  @FlyingWildAZ Жыл бұрын

  From a real King Air 200 pilot, thanks Ron!

• 
  @yobananaboy1856 Жыл бұрын

  My autopilot buttons, landing gear, toggle switches and flaps suddenly stopped functioning. Honeycomb gave me a throttle tester and it was indeed broken. Do you have a fix for this?

• 
  @Ron_A._Bolton Жыл бұрын

  Sorry I have not seen that. If you open it up and look for a broken wire, it woukd most likely be between the io controller and the front switch board.

• 
  @CarwashMairhuber Жыл бұрын

  If you press cancel and 4x resume, it will print an enginge statuspage

• 
  @Unclebenzs Жыл бұрын

  Thank you!! Been looking for this set up!

• 
  @user-py6ip1yl9y Жыл бұрын

  Ron: Just wanted to say thank you for an excellent video. I've flown the KA350 for almost two years and have never had the full use of the condition levers and prop feather. Super job. Now after applying your tips, It's my go-to trip taker. Keep up the good work. Excellent presentation, editing and facts..

• 
  @Spawned-in60 Жыл бұрын

  Is that an add-on for the sim? Looking for sea life to add to the Caribbean. Thx

• 
  @Ron_A._Bolton Жыл бұрын

  Was an add on for Bishops Rock lighthouse from memory.

• 
  @KarlH1980 Жыл бұрын

  Extending the flight stick like this takes helo flying in sims from being a pain in the neck to actually being fun.

• 
  @KarlH1980 Жыл бұрын

  Here are your solutions for bending the PVC pipe: kzread.info/dash/bejne/lZ982sWrnrWzZZc.html & kzread.info/dash/bejne/omWHr7GJkcTQl7w.html

• 
  @majestic-skies Жыл бұрын

  Nice setup! To be honest though I would have simply sold the logitech multipanel and switch panel myself but it's. I'll how you've configured it!

• 
  @mikepapahotel Жыл бұрын

  Hey Ron! My first Stream Deck arrived 5 days ago and I've been playing with it non-stop ever since - it's almost as much fun as actually flying! 😂 I run 3 screens for different programs like LNM, Navigraph, Chrome etc. - however because of the loss of focus when mouse clicks away from the main sim screen causing my Steam Deck's buttons to stop working - started to have a play with Lorbys AAOs and Flight Tracker etc. I read that because they connect directly to the sim without needing to mimic key strokes - the loss of focus doesn't happen. In reality though I found those solutions overly complicated, so I've returned to the simpler process of keystroke mapping. I purchased a nice set of icons so I'll put up with the loss of focus issue as I build out my folders. All the above waffle was only to describe the fact that I haven't flown in several days because I've also been trying to figure out the best way to configure the deck for not just multiple aircraft folders (profiles??) and their own sub-folders, but also the best way to set an upper level to handle a few other standard buttons like Chrome, Gmail, Little Navmap etc. I've created a single MFS button to get into the flight sim profiles - but then I was uncertain about the best folder structure to give easy access to everything with minimal button presses during flight. Your video just showed me how to create the kind of structure I need - so a big thank you from just north of Sydney! Mike... 😊👍🏻 🇦🇺

• 
  @johnf6545 Жыл бұрын

  Hi, for some reason I can't get the condition levers to go into cutoff, have the bravo configured the same as yours, cheers.

• 
  @Ron_A._Bolton Жыл бұрын

  Could be minor differences from mine. Others have posted their values too. What is the cockpit animation doing?

• 
  @johnf6545 Жыл бұрын

  @@Ron_A._Bolton Hi Ron, it goes through the full movement from idle to high but won't go to cutoff when I move to the detent position, cheers.

• 
  @Ron_A._Bolton Жыл бұрын

  @@johnf6545 I'll have a look today see if anything might have changed.

• 
  @Ron_A._Bolton Жыл бұрын

  Can you confirm you have condition lever 1 cut off assigned to joystick button 28 and condition lever 2 cut off assigned to joystick 33. I also have toggle engine 2 fuel valve assigned to joystick button 33 Also make sure you have turned the starters off or the props will keep spinning.

• 
  @johnf6545 Жыл бұрын

  @@Ron_A._Bolton Yes I also assigned engine fuel 1 to shut of on condition lever one cutoff, not sure if it was necessary. The props feather as you demonstrated and shut down. Warnings remind to shut starters off. Beast of an AC.

• 
  @sinclair433 Жыл бұрын

  Thank you so much for making this video! I'm notorious for blowing this fuse in the machine once or twice a year - and this walkthrough has saved us so much time and hassle as I need it for work. Very much appreciated, thanks again!

• 
  @Ron_A._Bolton Жыл бұрын

  Glad it helped.

• 
  @pauljordan8886 Жыл бұрын

  Great tutorial, well explained, easy to understand, thanks.

• 
  @pauljordan8886 Жыл бұрын

  Each time I get the latest PSP I revisit this to remind me how to do this. Many thanks for posting it.

• 
  @MonthlyFailsVideoResearch Жыл бұрын

  Hey CHANNELNAME, do you have an email address at which we could contact you regarding this video? We would be interested to discuss a license to use this video if this is generally possible? (i.e. via email) 🙂 Cheers, Felix

• 
  @Ron_A._Bolton Жыл бұрын

  Happy to talk, please put your email here.

• 
  @MonthlyFailsVideoResearch Жыл бұрын

  @@Ron_A._Bolton Sounds good! Our email is provided on our channels about page! :)

• 
  @DonJuan247 Жыл бұрын

  How's the joystick holding up so far?

• 
  @Ron_A._Bolton Жыл бұрын

  Really well, no issues so far.

• 
  @DonJuan247 Жыл бұрын

  @@Ron_A._BoltonMay I ask how much different does it feel from the original version. I would imagine that the weight added by the extensions may make it more loose as shown in the video, but does accuracy actually improve? Is there really a substantial precise movement difference Also I would like to make you the suggestion of 3d printing a round bearing to sit on top of the spring, there's a video on it, I will try it out since it makes the stick stay in place, which would be the cherry on the top for this set-up, just a thought. Anyway, let me know!

• 
  @Ron_A._Bolton Жыл бұрын

  @@DonJuan247 sure, please send the link. The fine accuracy is definitely better with the longer stick, so you can input finer movements, still only move the stick small ammounts, very close to the feel of a real cyclic, but without the feedback. Still makes landing a lot better and more accurate.

• 
  @DonJuan247 Жыл бұрын

  @@Ron_A._Bolton Oh great that's good to know! Here's the link for the mod I was talking about kzread.info/dash/bejne/p36VtcWKe9uuZdI.html

• 
  @Ron_A._Bolton Жыл бұрын

  @@DonJuan247 I watched, thanks, I had one installed before, but put it back to normal, it slips outside the dead zone and kicks the ap off, if my dog comes in and bumps the stick when I'm not using it, I would find myself in the ground before I knew what was happening. If it works for you then all good.

• 
  @stevobd5901 Жыл бұрын

  Nice video Ron. I adapted a joystick in similar way recently but I find that adjusting the sensitivity is problematic. Due to extending the cyclic length it requires further directional travel and not really what i hoped for. Any suggestions for improvement? Such as advice for cyclic sensitivity settings or adjusting the axis 'curves'? Thanks in advance.

• 
  @Ron_A._Bolton Жыл бұрын

  I did adjust the sensitivity graphs to get it dialled in. Once you have it set once it seems to stick ok.

• 
  @stevobd5901 Жыл бұрын

  Thanks very much. I'll keep tweeking the settings then and persevere. 👍

• 
  @micstatic Жыл бұрын

  nice job. So how do you physically mount the switch panel to the bravo etc? What kind of screws do you need to get?

• 
  @Ron_A._Bolton Жыл бұрын

  I built a perspex mount. I used M4 screws.

• 
  @pikechris6564 Жыл бұрын

  Do I need the device or I can use mobile apps from stream deck mobile

• 
  @Ron_A._Bolton Жыл бұрын

  You need to get a StreamDeck, they come in 9, 15 and 32 button versions.

• 
  @pikechris6564 Жыл бұрын

  @@Ron_A._Bolton to make it work for both?

• 
  @Ron_A._Bolton Жыл бұрын

  @@pikechris6564 I believe the StreamDeck software only works with the StreamDeck hardware, but there are other options that work with Apple or Android hardware, I however have not used either.

• 
  @alanbedford9989 Жыл бұрын

  Thanku Ron I tried and do this one now jammed up showing error code

• 
  @Ron_A._Bolton Жыл бұрын

  The fuse is jam protection, so it's time to get the machine serviced. Good luck, hopefully it just needs oiling.

• 
  @Aussiblue Жыл бұрын

  Thanks very helpful. However, please note that you don't actually need to remove the circular part with the blades to just replace the battery. So for other viewers start from the 8 minute mark of this video if you just need to replace the battery. This is especially important as on mine the screw posts broke when I tried to undo the 3 screws that hold the circular blade holder together; those three screws seems to have welded themselves into the posts on mine or were perhaps glued in. . If you can accept a slight (22% or so) reduction in running time there are batteries with solder tags available (search on "18500 3.7V 1100mAh Li-Ion Rechargeable Battery with Solder tabs") on ebay etc that are therefore much easier to fit. Just desolder the exiting tags on the PB board and solder the new battery in at the new tags. There are also ones with solder tabs on Amazon with 1400mAH albeit a bit pricey.