Пікірлер

• 
  @GunGiggity4 күн бұрын

  What type of sand is it and where do you purchase it from?

• 
  @Cpimms4 күн бұрын

  I used Masonry Sand. I got it from a material place near me that sells a bunch of different materials for construction/landscapers etc. I've also used Medium Sand before from home depot which worked well. I would say try to find a place local to you that sells different materials like I mentioned. That might be your best bet. Especially if you want it delivered to you.

• 
  @martinbasha12678 күн бұрын

  My rear tires rub with the fender, do you think these will help preventing that? I don’t car if it’s stiff but just the rubbing is bothering me.

• 
  @Cpimms8 күн бұрын

  Tough to say honestly. Could be too low that's why it's rubbing or the coilovers themselves could be going bad. Hard to say. You can try raising the height and see if that fixes it. Probably where I'd start

• 
  @lyndonjohnson983911 күн бұрын

  Amazing explanation, good looks bro

• 
  @Fireplace-si7xb16 күн бұрын

  YOU are the bomb smart video. Thank you

• 
  @Cpimms16 күн бұрын

  Thank you! Glad the video was informative and able to help you out. Appreciate the support! 👍🏻

• 
  @thomashanan199616 күн бұрын

  Backlapping and reel to bedknife adjustments become way easier after doing them a few times….

• 
  @Cpimms16 күн бұрын

  I'd agree! As with almost anything else in life. 1st time around can be interesting. But once you get the jist of it all it goes smoothly in the future.

• 
  @americasgotseriousproblems263217 күн бұрын

  What is the blue handle for? Up & down positions does what?

• 
  @Cpimms17 күн бұрын

  The Blue Handle next to the motor is the adjustment for bagging clippings or mulching. The down position is for when you're bagging and the up position is for when you want to mulch clippings. There's a flap plug on the inside that blocks the pass through hole for the clippings.

• 
  @americasgotseriousproblems263217 күн бұрын

  @@Cpimms thanks, I used the mower for the first after I asked the question. I mulch only so I’ll keep the handle up. Nice mower, like it so far. Very light & easy to operate. T I found nothing in the booklet. Lowes has an operator’s manual with table of contents I just saw a little while ago. Toro should have provided a better booklet with mower.

• 
  @holupwedemboyz627719 күн бұрын

  Bro got putting green grass

• 
  @kenrobi133219 күн бұрын

  I'm a bit confused. That was not 6 ounces. 6 ounces would be like half a can of soda (2/3 cup), you poured like 1.5 ounces. Also why use a scale? Just use a measuring cup.

• 
  @Cpimms19 күн бұрын

  It doesn't seem like much because the measuring cup I was using is wider than your traditional small measuring cup. The scale was used for that reason to make sure I got the correct measurement since I was using a wider measuring cup. If you look at other videos on KZread other people do the same thing as well.

• 
  @user-gj6cw6yc8s22 күн бұрын

  😮 you had a lot of irrelevant things to say .... It looks nice we bought one today we bought the damn weed eater to go with it .....😒👉 That thing cuts nice ..... Freakin sweet ....... 😒🫱 I had to go back to a two-cycle though what the f*** is wrong with them and why didn't they make a four cycle or they were unavailable 😏👉 tell me this piece of crap is going to last It's hard to keep a good running weed eater Not that I care we have not had this one before .....😏🫱... I like the lawn mower But why does their weed eater... stay the same s*** I like 4cycle It's easier just using gas .... I hate 2 cycle anything

• 
  @buddylight759523 күн бұрын

  So are you saying if you're not at least 5'11" the handle will seem a bit high and uncomfortable? I'm 5'7"

• 
  @Cpimms23 күн бұрын

  I wouldn't necessarily say that. However it's one of those things that is definitely personal preference. I think I stumbled across one other video a while ago, and the person was around your height and said it was comfortable for him. I would suggest checking one out in person if possible. That way you can get the idea of how it looks and how it might work for you.

• 
  @buddylight759523 күн бұрын

  @@Cpimms Okay, Thanks!

• 
  @thomashanan1996Ай бұрын

  Got the carpet going…

• 
  @CpimmsАй бұрын

  Thanks! That's the goal. Trying to get that fairway look!

• 
  @Faded_MuffinzАй бұрын

  Fuckin bad ass dude

• 
  @conner474Ай бұрын

  Just put mine together and the way the control arm is attached is a little screwy. I have a little play and it doesnt fully open maybe 99% open. But i can do it by hand..No matter how i try to caibrate it it seems there is a problem somewhere else. I read one review on Amazon and somebody was having the exact same problem.

• 
  @CpimmsАй бұрын

  That's interesting. I didn't run into that issue with mine. Maybe contact Earthway to see if they can help

• 
  @JayBeInbrotherhoodАй бұрын

  Love the video brother. Just bought one and this truly helped give me an idea of what to expect. Thank you!

• 
  @CpimmsАй бұрын

  Glad my video was informative! Congrats on the new piece of equipment!

• 
  @johnandbinkАй бұрын

  Just got this mower and couldn’t figure out how to lower the handle. Thanks for the video

• 
  @CpimmsАй бұрын

  Glad my video was able to help you out. Congrats on the new piece of equipment!

• 
  @Priority57Ай бұрын

  Toro blade is not sharp when it's brand new. I remove and sharpen/balance. It made a big difference

• 
  @mrob75Ай бұрын

  thanks for the vid…how has your lawn turned out with this spoon feeding method? Also, cool hair. 😊

• 
  @CpimmsАй бұрын

  Thanks! I appreciate it. It's been working pretty well. The lawn seems to hold its color more. I'll see how it really works once it starts warming up more.

• 
  @lloydharryАй бұрын

  when you are twisting with hand, is the lower strut 'hole-mount' where bolt goes thru, is it unbolted and spinning too??

• 
  @CpimmsАй бұрын

  Nope. It's all bolted up and mounted.

• 
  @lloydharryАй бұрын

  @@Cpimms thanks!

• 
  @Priority57Ай бұрын

  Just make sure the blade sharpen.

• 
  @CpimmsАй бұрын

  Yes always! Actually just switched out the mulch blade to a regular new fresh cutting blade.

• 
  @TompayzАй бұрын

  Do you have to do more than just take your wheel off and unlock the bottom ring to start adjusting, or is there more ?

• 
  @CpimmsАй бұрын

  That should be it for the most part to be honest. Might need some lubricant to help break the ring loose. I know some coilovers setups can be slightly different. Just make sure you're turning them the right way for what you're wanting to do such as raise/lower it etc. I will say there might be some trial and error to get it to exactly where you want it. Taking off the wheel and putting it back on a couple times most likely to check height once you're done adjusting.

• 
  @TompayzАй бұрын

  @@Cpimms well my front coilsovers are making out, all three rings are sitting on top of eachother, but in the rear, the 2 too collars are on eachother with the spring above, and 2-3 inches of threading then my bottom locking collar, I was twisting the Top 2 collars together trying to lower it, it moved around maybeeee one full very hard fought rotation then won’t not turn again, I’m wondering if they are already maxed, I was thinking they weren’t because the front has all the rings stacked on each other, maxed.

• 
  @CpimmsАй бұрын

  @@Tompayz Oh ok I gotcha. I think the majority of coilovers go lower in the front compared to the rear. Not sure the specifics of why that is. What you could try is raising it a little and then lowering it back down. Maybe some grit/debris got caught in the threads that's not letting it go past that point. Just an idea you could possibly try.

• 
  @TompayzАй бұрын

  @@Cpimms that’s the thing, my front is definitely higher than me rear is, rear is tucking, looks as if it still had room left to go but the front seems as it’s maxed just looking at it, haven’t taken the wheel off, just stuck my phone up there and got a good view of the 3 rings stacked but there’s a good 2-3 of threads in between the Rings

• 
  @TompayzАй бұрын

  @@Cpimms 2-3 inches of thread in between the top 2 rings and bottom ring*

• 
  @TompayzАй бұрын

  Dang Man I ha’ve had some Rev9 coils for about 6 months and pretty low, tried adjusting today and was adjusting the springs smh, Will try this tomorrow, Thank u

• 
  @Insight_XCIАй бұрын

  Just got this a couple hours ago, and fucckkkk it's a HUGE upgrade from the crappy Murray push mower that finally died for good😂 Got home, assembled it, put in the oil and gas, then immediately knocked out my overgrown yard😂

• 
  @CpimmsАй бұрын

  Nice!! That's awesome. Congrats on the new mower! I just used mine over the weekend to cut the new sod I put down in my front yard a few weeks ago. Actually just put a video out on it too 😂👍🏻

• 
  @rugs108Ай бұрын

  I would say that the cartridge you are using is a scarifying Cartridge as a verticutter blades are straight and and closer together, but I agree it still worth doing with that Cartridge as it will help

• 
  @CpimmsАй бұрын

  Yes you're correct on that. That is my mess up for sure. I appreciate the feedback. Thank you!

• 
  @jetholcomb1Ай бұрын

  I’m sorry you live in Cali. Great video

• 
  @user-ew9kh8vu1j2 ай бұрын

  This is a great video!! Thank you.

• 
  @Cpimms2 ай бұрын

  Thank you! I appreciate it! Glad it was informative and able to help you out. 👍🏻

• 
  @ericalvarez39532 ай бұрын

  Oil?, gas? Dress the tires? Light kit? Pimp My Mower Edition 😂😂😂

• 
  @IamJ0072 ай бұрын

  The measurement on the threads on the end was a nice tip. Thanks, well done.

• 
  @Cpimms2 ай бұрын

  Awesome! Glad my video was informative and able to help you out

• 
  @thomashanan19962 ай бұрын

  Cool your Dad helped out…. You have that carpet look going now…

• 
  @Cpimms2 ай бұрын

  Thank you! Ya almost! Once I get the mower on it and get it looking like the back we will be in good shape! 👍🏻

• 
  @thomashanan19962 ай бұрын

  Great dedicated work…. Will give good results…

• 
  @Cpimms2 ай бұрын

  Thank you! I Appreciate that! The prep work is the most important for sure.

• 
  @adriantomlin29022 ай бұрын

  I'm sorry but California is goofy in their dumbass laws! Those small engines no more pollute the air then one of my farts after indulging in three giant bean burritos man!! Cmon! 😎😎🤣🤣

• 
  @suzrmx2502 ай бұрын

  They don't have to sel them in the state it will just mean other states will be supplying gas via Amazon.

• 
  @danielabbate90012 ай бұрын

  Toro is garbage please don't waste your money these mowers are junk

• 
  @luketamoncannon37952 ай бұрын

  Thanks man I just bought a super recycler with this new type handle on it & was hateing it for the fact there wasn't a hight adjustment on it & luckily I just saw you're video showing a lower setting..tys sirr💪🏼.

• 
  @Cpimms2 ай бұрын

  Awesome! Congrats on the new piece of equipment. Glad my video was able to help you out! I'm sure you'll enjoy the new mower 👍🏻

• 
  @luketamoncannon37952 ай бұрын

  @@Cpimms thanks man, it's give & take coming from using a 30" timemaster but with new zero-turn my 30" wouldn't fit on my trailer so I sold it & bought the super recycler because of stow n go capability so it'll fit on my 5x8 trailer. Little mower is fast I'll give it that but few points i didnt like, it comes with bag but no "bagger blade & no discharge chute, I'm still flustered waiting on my discharge chute now 3 weeks. & had to order a bagger blade.. 800$+ mower should come with discharge chute & blade for bagging..js

• 
  @Cpimms2 ай бұрын

  @@luketamoncannon3795 I totally get where you're coming from forsure. It's the little things that can be the most frustrating sometimes. I already swapped to a different blade as well. So I certainly get that point.

• 
  @timpmuldoon7362 ай бұрын

  My opinion Toro has been producing poor quality walk behind residential mowers for currant & past 10yrs I currently own Toro AWD ♻️ Recycler with Briggs & Stratton 163cc Engine I also own Husqvarna 3 in 1 with Honda GVC 160 cc Engine. Husqvarna is much better performing mower than Toro .. Toro looks impressive you fight with AWD especially backing up around obstacles…Engine with auto choke on start up is very rough running… I’m going to try replacing carburetor with New 1 to see if it helps ..? Toro needs to get back engineering better product more so Engine Mfg they use ..! Years ago they used Tecumseh & Suzuki Engine on their mowers .. Great Engines of past … I wished go with Kawasaki or Kohler Engine.. Good informative video..👍🏼

• 
  @Cpimms2 ай бұрын

  I hear ya on that! I'd say the reliability and build quality of all outdoor equipment across the board has gone down compared to what it used to be. Stuff just isn't built to last anymore. I've heard that people have had issues with the spark plug not being totally snug and also the spark plug boot not fully seated all the way which can cause sputtering. Maybe try that first? Thank you for the support! Much appreciated 👍🏻

• 
  @adriantomlin29022 ай бұрын

  I have a 2011 Toro Super Bagger rwd with a Honda motor. Other then having to have the valves adjusted. That mower has been a grass eating beast.

• 
  @simonamaral99042 ай бұрын

  I bought the battery version for like $750-$800 last year and can't wait to get rid of it.Toro dropped the ball on this one, the height adjustment is just absurd that adjustment barely does anything especially if you a shorter person. Also one of the front tires just spins off the ground while the other 3 hit the ground. I called toro and they basically said yeah there's nothing we can do about that.Also the price for an 7.5ah battery was $330 ! Its just a bad mower!

• 
  @Cpimms2 ай бұрын

  Totally get your points. I'm glad I got a gas one before they totally phased out of them here in Cali. I definitely have seen and heard about the wheel issues which is annoying for sure. For my case my mower is always in the lowest setting or right above it so the wheel issue isn't a problem at those heights. The batteries are not cheap by any means that's for sure.

• 
  @FlowTieGuy2 ай бұрын

  Honda

• 
  @jamesdotson36402 ай бұрын

  And then..........

• 
  @gregoryburkhead78132 ай бұрын

  Great video. It's crazy they won't sell it anymore. The electric mowers for a 21" is like 1200. Shit. How will they last if u have a landscape company

• 
  @Cpimms2 ай бұрын

  Thank you! I appreciate the support! Ya it's crazy how much some of them are. Most of them aren't considered "commercial grade" models either for that price. Batteries aren't cheap either. Definitely glad I picked up this and my McLane when I did that's for sure.

• 
  @mikerossman98632 ай бұрын

  I’d imaging the go out of state and get what the want. I know I sure as hell would😂

• 
  @keshiaknight65892 ай бұрын

  I literally just bought one less than a week ago…

• 
  @Cpimms2 ай бұрын

  @@keshiaknight6589 Nice!! Congrats on the new piece of equipment 👍🏻

• 
  @gregoryburkhead78132 ай бұрын

  @@keshiaknight6589 how u like it

• 
  @lloydharry2 ай бұрын

  good explanation! thanks

• 
  @Cpimms2 ай бұрын

  Thank you! Appreciate the support. Glad it was informative.

• 
  @bustermv2 ай бұрын

  Geez. Just brought one and will unbox it now fully informed. Great presentation.👁️

• 
  @Cpimms2 ай бұрын

  Thank you! I appreciate it. Congrats on the new piece of equipment.

• 
  @tcbtcb2 ай бұрын

  No side discharge, hard no for me.

• 
  @Cpimms2 ай бұрын

  You can get a side discharge piece for it but it's placed in the back where the bag goes and it shoots out that way. But ya it doesn't have the traditional side discharge like the old ones.

• 
  @joed32642 ай бұрын

  Why would anyone live in California? Liberal garbage state.

• 
  @longnwen._media2 ай бұрын

  so does it js like hang on with no bracket support? 😭

• 
  @Cpimms2 ай бұрын

  There is a little bracket that comes with the intake that you can use. It mounts to one of the holes by the strut tower. You'll have to bend it into the configuration you want it to be in. It's kinda funky tbh just a heads up on that part.

• 
  @Welcome2TexasPodcast2 ай бұрын

  Great job. I made a video a few days back for the same reason. I watched a video hack his apert and swear up and down that it was defect unit. I told him he was wrong. Common sense.

• 
  @Cpimms2 ай бұрын

  Thank you! I appreciate that. Interesting, I think I might have stumbled across that same video too. It's definitely part of their new design for sure. It happens though I know I've done the same thing too.

• 
  @GettingthruLife2 ай бұрын

  My video to refer to. I removed my rubber bumpers only to lower my handle down. How is that hacking my new mower apart? Never expressed the mower itself was defective and expressed how much I liked using it beside the lack of handle adjust. You are a confused individual taking bad about someone else.

• 
  @darter2162 ай бұрын

  Great video….would never move to California with all their overly Leftist goofy laws….ugh. Sorry about the political rant

• 
  @Cpimms2 ай бұрын

  Thank you! I appreciate the support.

• 
  @TheLawnMechanic2 ай бұрын

  NYer in Ohio 50/50 is better. get both views but nothing radical

• 
  @TheLawnMechanic26 күн бұрын

  The whole world is nuts, and I want to no part of it i love everyone i don’t need a law to tell me how to be a good person.

• 
  @johndenver85742 ай бұрын

  Toro's quality for me who worked at a toro dealer has gone down quite a bit unfortunately.

• 
  @Cpimms2 ай бұрын

  Yes I agree forsure! Like I mentioned in one of the other comments. It's that way all across the board with all the other brands too. Stuff is not built to last like they used to be

• 
  @no-hndle2 ай бұрын

  We have the 2021 super 565 .. just blew up the motor ..B&S Warranty pretty much says if you start this engine, you void warranty!

• 
  @johndenver85742 ай бұрын

  2035 is when the law takes full affect my friend in California.

• 
  @Cpimms2 ай бұрын

  From the articles I've seen, 2035 is for automotive vehicles. They've already started phasing out small engine outdoor equipment this year.

• 
  @johndenver85742 ай бұрын

  ​@Cpimms man that awful. I'd go buy something out of state at that piont.

• 
  @TheLawnMechanic2 ай бұрын

  Did you like the height of the handlebars < it's like a Harley with ape hangers

• 
  @Cpimms2 ай бұрын

  Hahaha I hear ya on that! Definitely feels way more comfortable and better in the lowest setting like I mentioned in the video. A little different for sure

• 
  @no-hndle2 ай бұрын

  .. remove the bumpers completely = lower setting.

• 
  @TheLawnMechanic2 ай бұрын

  @@no-hndle good idea , I did try it. But than the handlebars felt like a jet ski with a foot of movement

• 
  @AngeloR6742 ай бұрын

  Get to the point! You go on and on and talk about nothing!

• 
  @RestlessMind04792 ай бұрын

  8:15 the EXACT reason i needed this video lol thank you!