ur very knowledgeable to install this but the background music is horrible
@olyravioli Жыл бұрын
Hey man, what axles did you use for your GSR to put in your CRX? I have an e.g. Co-op that's currently driving with a GSR in it, but I've read a lot that Eg axles don't fit EF chassie. Ive checked around but i keep getting the "use the search bar its been covered a million times" response. Thanks in advance man, and love the c5!
@jacksonbuilt5830 Жыл бұрын
Ooof man that's a good question, I would've been able to tell you a while back but I've brain dumped all my b series knowledge for k series stuff. I want to say I used gsr axles with the cups swapped and abs rings removed. I wish I could help more this was a long time ago!
@PEGCITYBOMBER Жыл бұрын
Thanks man. I appreciate the help a lot. Did my first clutch job semi solo and ended up driving home with 1,3 n 5th gear haha. In my garage right now fixing this issue.
@jacksonbuilt5830 Жыл бұрын
I'm glad I could help someone! Clutch jobs on vettes are not an easy task, more power to you!
@tcapo514 Жыл бұрын
when you're trying to explain something you shouldn't have music in the background I can't understand a word you're saying
@jimirox1928 Жыл бұрын
Should have pulled the remaining 4 bolts and lubricated all the rods as well as the nylon bushing on the bottom of the shifter. Any kind of grease will be fine. Then the shifting gets even easier.
@DirectedByTazer Жыл бұрын
sorry man but music is so loud over your talking audio, can barely hear what you're even saying
@jacksonbuilt5830 Жыл бұрын
It be like that sometimes. Newbie mistakes
@ericmarchione6468 Жыл бұрын
Ding dong doesn't finish job on video
@AdamChase87 Жыл бұрын
What setting did you use on the welder?
@ironworker1365 Жыл бұрын
Thank you, good video!
@johnmakbuilds Жыл бұрын
Come on. You know better than to post a video on changing motor without showing the changing of the motor!! Especially not saying that you don’t have the video until it’s 3/4’s of the way through.
@jacksonbuilt5830 Жыл бұрын
Yeah, did what I could with a limited budget and equipment that kept failing. It is what it isss
@catalinabay-tripper44702 жыл бұрын
Background music covers the talking.
@AdamChase872 жыл бұрын
Did you weld in the passenger side mount?
@Megacatares2 жыл бұрын
You tell how to take it apart and put it back together but I did not see your discussion on aligning it. That would be helpful. Thanks for the video.
@jacksonbuilt58302 жыл бұрын
Thank you, Ill try to be more detailed whenever I get around to installing an MGW shifter
@nmarkose2 жыл бұрын
Was wondering what happened to the disrespectful crx lol do you have a follow up to the transmission?
@jacksonbuilt58302 жыл бұрын
Yes sir I did, I'm currently traveling for work, have been for a while but I'm coming home soon. I have a few videos to put out on the Disrespected CRX.... but..... it is my roommates car now, and he got discouraged with it since I haven't been home to do the work on it for him. He wound up selling it, unfortunately. True disrespectful fashion
@CopperShoes2 жыл бұрын
Wtf you didn’t show how to fix it
@jacksonbuilt58302 жыл бұрын
@7:54, sorry brother couldnt do much when the only to tools I had to film stopped working
@onemanshow41162 жыл бұрын
@@jacksonbuilt5830 Fair enough on the equipment failure, can help that… but you didn’t say what the problem was, and/or the solution. Surely you can give us a hint? Or are you not sure?
@jacksonbuilt58302 жыл бұрын
@@onemanshow4116 The problem was the window motor/ regulator. The install is the reverse of the disassemble, which I didn't do a great job of capturing. When you order them online ( I suggest going with AC Delco the Chinese ones only last a couple months) they come as one unit with the tracks attached. The hardest part of the installation is using the set screw to adjust the angle that the window rolls up at. If you go too far in either direction it will not seal against the rubber door seal or it won't roll-up. Again, my apologies for the quality of the content. The next time I have a window motor fail I'll do a more comprehensive video on the installation and adjustment.
@tomcarey3457 Жыл бұрын
wtf I just wasted my time I need to see how to take out the motor
@ericharrison45042 жыл бұрын
I noticed your shift knob rattles all over the place when you rev it…. Why?
@jacksonbuilt58302 жыл бұрын
Too many bald eagles, brother.
@zedrone79753 жыл бұрын
Looks like you're at the old Perrin AFB in Grayson county
@jacksonbuilt58303 жыл бұрын
This was actually at Sheppard in Texas
@SVfighter13 жыл бұрын
Is it me or your diagram is incomplete
@jacksonbuilt58303 жыл бұрын
No sir, this is the diagram I used from corevetteforums. Though I am unsure the original creator, I could probably track down the post if you would like
@SVfighter13 жыл бұрын
I actually found the original post and some information is need in context with the diagram you have. He’s post is complete.
@jerryswafford63913 жыл бұрын
Did you install the header wrap for any special reason?
@jacksonbuilt58303 жыл бұрын
I wrapped them to keep engine bay temps down, it also really helped keep the temp down in the footwell while I was cruising on a summer day
@jerryswafford63913 жыл бұрын
@@jacksonbuilt5830 I'm having clutch pedal sticking to the floor and was thinking it was from the heat from the headers. Boiling the fluid is what I have heard can cause this issue
@jacksonbuilt58303 жыл бұрын
@@jerryswafford6391 Is it while you're at WOT or does it happen randomly?
@jerryswafford63913 жыл бұрын
@@jacksonbuilt5830 ya just below 6000rpm trying to shift 2nd to 3rd
@jacksonbuilt58303 жыл бұрын
@@jerryswafford6391 I recommend staying on top of changing your clutch fluid via ranger method or if you have a speed bleeder that would come in handy. That's what fixed my problem but it my buddys car did the same thing until he went to an aftermarket clutch and replaced the slave
@gabrielbernal983 жыл бұрын
Can you help me build a car?
@jacksonbuilt58303 жыл бұрын
as u wish
@graveshaker3 жыл бұрын
Did you run the wire from the clutch switch to both wires leading to the toggle switch or one wire to toggle switch?
@jacksonbuilt58303 жыл бұрын
Only one wire, if I remember right it was blue to the clutch switch. I'd go check the wire color for you right now but I travelled for the holidays
@jimmygreen66753 жыл бұрын
Can't lie keep up the good work and keep it moving 💯 👌 no days off til she runs......
@jacksonbuilt58303 жыл бұрын
I appreciate you taking the time to say that, people like you are the reason I stick to it
@jimmygreen66753 жыл бұрын
@@jacksonbuilt5830 Kid your my hero im following your blue print...... so keep teaching...... #keepgunnin
@jacksonbuilt58303 жыл бұрын
Link to expandable loom www.amazon.com/Besteek-50ft-Expandable-Braided-Sleeving/dp/B07F5G1RNF/ref=pd_lpo_60_t_1/137-9966155-7751733?_encoding=UTF8&pd_rd_i=B07F5G1RNF&pd_rd_r=8f26658c-3694-4cb9-8735-34521c4a0fec&pd_rd_w=Gwom5&pd_rd_wg=QHRX0&pf_rd_p=7b36d496-f366-4631-94d3-61b87b52511b&pf_rd_r=D5ANBHH3114E75HQYNDJ&psc=1&refRID=D5ANBHH3114E75HQYNDJ
@jimmygreen66753 жыл бұрын
And Kidd get a JDM front end!!!!!!!!
@jacksonbuilt58303 жыл бұрын
Hell I wish I had the budget for a full urethane mugen kit lmao
@jimmygreen66753 жыл бұрын
Yo I'm subbed up and I respect your grind..... when you done with the crx make that thing shine ✨ 😎.... #Gunner we be watching 👀
@BackYardHondasOhio3 жыл бұрын
Project looking good. Putting a k24a2 in my CRX as well. Could you include links to where you got the loom?
@jacksonbuilt58303 жыл бұрын
Thanks man! I'll pin a comment with the link
@gabrielbernal70993 жыл бұрын
Watching your videos gives me confidence to build my own car from scratch
@jacksonbuilt58303 жыл бұрын
I keep telling you to get to it
@paigemarcum22343 жыл бұрын
😮🔥🔥
@nejchorvat10973 жыл бұрын
can you do rotrex supercharger on k24
@jacksonbuilt58303 жыл бұрын
Sorry man I’m not too knowledgeable on that I don’t think I can give you an answer
@70camman3 жыл бұрын
Love this shit
@jacksonbuilt58303 жыл бұрын
Thank you so much man
@paigemarcum22344 жыл бұрын
🔥🔥🔥
@mfnxegel50444 жыл бұрын
keep it up bro ! im learning from you as well !
@jacksonbuilt58303 жыл бұрын
I really appreciate man!!
@paigemarcum22344 жыл бұрын
This is the best car video I’ve ever seen in my whole life
@slowboicody4 жыл бұрын
👏
@zobius91915 жыл бұрын
Nice work!
@jacksonbuilt58305 жыл бұрын
Thanks man!
@AdrianRodriguez-kb3fu5 жыл бұрын
Good video man. Quality 👌
@jacksonbuilt58305 жыл бұрын
Thanks man! Anythings better than that first vid lol
Пікірлер
Can't hear you over the music!!!!
That’s works fir little while
Would rather hear wind than annoying loud music
ur very knowledgeable to install this but the background music is horrible
Hey man, what axles did you use for your GSR to put in your CRX? I have an e.g. Co-op that's currently driving with a GSR in it, but I've read a lot that Eg axles don't fit EF chassie. Ive checked around but i keep getting the "use the search bar its been covered a million times" response. Thanks in advance man, and love the c5!
Ooof man that's a good question, I would've been able to tell you a while back but I've brain dumped all my b series knowledge for k series stuff. I want to say I used gsr axles with the cups swapped and abs rings removed. I wish I could help more this was a long time ago!
Thanks man. I appreciate the help a lot. Did my first clutch job semi solo and ended up driving home with 1,3 n 5th gear haha. In my garage right now fixing this issue.
I'm glad I could help someone! Clutch jobs on vettes are not an easy task, more power to you!
when you're trying to explain something you shouldn't have music in the background I can't understand a word you're saying
Should have pulled the remaining 4 bolts and lubricated all the rods as well as the nylon bushing on the bottom of the shifter. Any kind of grease will be fine. Then the shifting gets even easier.
sorry man but music is so loud over your talking audio, can barely hear what you're even saying
It be like that sometimes. Newbie mistakes
Ding dong doesn't finish job on video
What setting did you use on the welder?
Thank you, good video!
Come on. You know better than to post a video on changing motor without showing the changing of the motor!! Especially not saying that you don’t have the video until it’s 3/4’s of the way through.
Yeah, did what I could with a limited budget and equipment that kept failing. It is what it isss
Background music covers the talking.
Did you weld in the passenger side mount?
You tell how to take it apart and put it back together but I did not see your discussion on aligning it. That would be helpful. Thanks for the video.
Thank you, Ill try to be more detailed whenever I get around to installing an MGW shifter
Was wondering what happened to the disrespectful crx lol do you have a follow up to the transmission?
Yes sir I did, I'm currently traveling for work, have been for a while but I'm coming home soon. I have a few videos to put out on the Disrespected CRX.... but..... it is my roommates car now, and he got discouraged with it since I haven't been home to do the work on it for him. He wound up selling it, unfortunately. True disrespectful fashion
Wtf you didn’t show how to fix it
@7:54, sorry brother couldnt do much when the only to tools I had to film stopped working
@@jacksonbuilt5830 Fair enough on the equipment failure, can help that… but you didn’t say what the problem was, and/or the solution. Surely you can give us a hint? Or are you not sure?
@@onemanshow4116 The problem was the window motor/ regulator. The install is the reverse of the disassemble, which I didn't do a great job of capturing. When you order them online ( I suggest going with AC Delco the Chinese ones only last a couple months) they come as one unit with the tracks attached. The hardest part of the installation is using the set screw to adjust the angle that the window rolls up at. If you go too far in either direction it will not seal against the rubber door seal or it won't roll-up. Again, my apologies for the quality of the content. The next time I have a window motor fail I'll do a more comprehensive video on the installation and adjustment.
wtf I just wasted my time I need to see how to take out the motor
I noticed your shift knob rattles all over the place when you rev it…. Why?
Too many bald eagles, brother.
Looks like you're at the old Perrin AFB in Grayson county
This was actually at Sheppard in Texas
Is it me or your diagram is incomplete
No sir, this is the diagram I used from corevetteforums. Though I am unsure the original creator, I could probably track down the post if you would like
I actually found the original post and some information is need in context with the diagram you have. He’s post is complete.
Did you install the header wrap for any special reason?
I wrapped them to keep engine bay temps down, it also really helped keep the temp down in the footwell while I was cruising on a summer day
@@jacksonbuilt5830 I'm having clutch pedal sticking to the floor and was thinking it was from the heat from the headers. Boiling the fluid is what I have heard can cause this issue
@@jerryswafford6391 Is it while you're at WOT or does it happen randomly?
@@jacksonbuilt5830 ya just below 6000rpm trying to shift 2nd to 3rd
@@jerryswafford6391 I recommend staying on top of changing your clutch fluid via ranger method or if you have a speed bleeder that would come in handy. That's what fixed my problem but it my buddys car did the same thing until he went to an aftermarket clutch and replaced the slave
Can you help me build a car?
as u wish
Did you run the wire from the clutch switch to both wires leading to the toggle switch or one wire to toggle switch?
Only one wire, if I remember right it was blue to the clutch switch. I'd go check the wire color for you right now but I travelled for the holidays
Can't lie keep up the good work and keep it moving 💯 👌 no days off til she runs......
I appreciate you taking the time to say that, people like you are the reason I stick to it
@@jacksonbuilt5830 Kid your my hero im following your blue print...... so keep teaching...... #keepgunnin
Link to expandable loom www.amazon.com/Besteek-50ft-Expandable-Braided-Sleeving/dp/B07F5G1RNF/ref=pd_lpo_60_t_1/137-9966155-7751733?_encoding=UTF8&pd_rd_i=B07F5G1RNF&pd_rd_r=8f26658c-3694-4cb9-8735-34521c4a0fec&pd_rd_w=Gwom5&pd_rd_wg=QHRX0&pf_rd_p=7b36d496-f366-4631-94d3-61b87b52511b&pf_rd_r=D5ANBHH3114E75HQYNDJ&psc=1&refRID=D5ANBHH3114E75HQYNDJ
And Kidd get a JDM front end!!!!!!!!
Hell I wish I had the budget for a full urethane mugen kit lmao
Yo I'm subbed up and I respect your grind..... when you done with the crx make that thing shine ✨ 😎.... #Gunner we be watching 👀
Project looking good. Putting a k24a2 in my CRX as well. Could you include links to where you got the loom?
Thanks man! I'll pin a comment with the link
Watching your videos gives me confidence to build my own car from scratch
I keep telling you to get to it
😮🔥🔥
can you do rotrex supercharger on k24
Sorry man I’m not too knowledgeable on that I don’t think I can give you an answer
Love this shit
Thank you so much man
🔥🔥🔥
keep it up bro ! im learning from you as well !
I really appreciate man!!
This is the best car video I’ve ever seen in my whole life
👏
Nice work!
Thanks man!
Good video man. Quality 👌
Thanks man! Anythings better than that first vid lol
Wow 💥😀
Paint looks good btw. Day top coat 👌
Ayeeeee