Usw it to build double wish bone on a gokart grab aome scrap metal from a junkyard fad a chasis and grab some old motorcycle engine
@kennywallace149716 күн бұрын
What?
@sushipoppin317829 күн бұрын
must protect sandwich at all costs 🫡
@xXGENDAMAGEXx29 күн бұрын
I cannot believe he didn’t break any of those light bulbs!!!!! 😂😂😂😂😂
@grayfoxomegaАй бұрын
I just installed one of these on Saturday and did nothing of the sort for that top bolt on the passenger side. I didn’t even use the hex bolts they provided! The instructions aren’t great. I used one of the brass colored bolts on the top for the passenger side, the shorter 30mm one. They include longer for bottom separate in the bracket kit. They do cover the passenger side in the instructions but say use the longer (but don’t) Good luck at the track
@CornerAfterCornerАй бұрын
I hope you didn't put yours on the stiffer setting because that ended up being a mistake for me!
@grayfoxomegaАй бұрын
@@CornerAfterCorner haha, good to know! I thought about!
@jonnysteve_RFАй бұрын
Kenny, that vent is the biggest atrocity that I've ever seen in the automotive community, and as a matter of fact, any other community as well.
@wackyssnacks8826Ай бұрын
Next time you should try a brake line spanner.
@CornerAfterCornerАй бұрын
I honestly can't tell if you're being serious but that is essentially what we created. A 22mm flare nut wrench
@wackyssnacks8826Ай бұрын
@@CornerAfterCorner sorry brother forgot the USA hasn’t figured out the metric system yet pretty common here x
@WillardlyАй бұрын
All that room to work and you struggled?
@CornerAfterCornerАй бұрын
WHAT ROOM
@CornerAfterCornerАй бұрын
Oh I see you thought I was taking out the front (pre cat) sensor...
@mitchdiesel3286Ай бұрын
Exactly, that wrench would spread and slip if the sensor was really tight. I know this from experience
@mattsnell33Ай бұрын
“You won’t get this on the tool truck” *shows a Mac wrench. O sure they have those on the Mac truck, and o2 sockets… lol
@CornerAfterCornerАй бұрын
That was a gift...
@iamthewankerpantsАй бұрын
The tool truck won't sell that, because they already sell better tools for that.
@CornerAfterCornerАй бұрын
Not at 1am!
@kdro9521Ай бұрын
Heat it up.
@CornerAfterCornerАй бұрын
Couldn't get the torch in there either! It sits down behind the engine next to the firewall, and about 10000 other wires...
@kdro9521Ай бұрын
@@CornerAfterCorner Ahhhh yea, I suppose I wouldn’t risk that either. It’s hard to tell from the video.
@thegrumchronicles3558Ай бұрын
They sell a socket for that and they usually work good. It has 5 sides and one side is open for the wire. Make sure you put a tiny bit of copper antisieze on the new one.
@CornerAfterCornerАй бұрын
I would have used mine if it would fit...
@thegrumchronicles3558Ай бұрын
@@CornerAfterCorner fair enough, I stand corrected.
@user-fy5zx4ug8eАй бұрын
Get a smaller rachet so you are not hitting the ground
@CornerAfterCornerАй бұрын
Its not?
@Yankeerebel806Ай бұрын
Number of metric sets omits the 18mm
@DGZMusicАй бұрын
Same
@Samestori214Ай бұрын
3/4
@mimcduffee86Ай бұрын
3/4 is 19, not 18. 18 would be about 23/32.
@CornerAfterCornerАй бұрын
I would like to point out that it actually was an 18 I'm just an idiot!
@Samestori214Ай бұрын
@@CornerAfterCorner same here. It takes me to look through my whole tool box to find the right size.
@kennywallace14972 ай бұрын
Hey sick video me!
@CornerAfterCorner2 ай бұрын
Thanks me!
@shortroundChris2 ай бұрын
Can you elaborate the format of this event? Is there a limit of runs per driver? Or is the course just open for the day and go as you please?
@CornerAfterCorner2 ай бұрын
Sure thing! The event is held from 8 to in this case 2:00 that seems to be different for every event depending on other activities going on at the track for the day but you get to run as many times as you want. You just go on the course for a few laps if you seem like you know what you're doing they seem to keep you out for longer but if you look like you're being dangerous than they'll take you off sooner. When they point you off the track you can just get back in line. Events have been limited to 60 or so people so people get more seat time
@shortroundChris2 ай бұрын
Will be there with the same Host June 22, yall going too?
@CornerAfterCorner2 ай бұрын
June 22nd we are going to Canaan Motor Club for our first HPDE so we will not be there, but if the event is being held by Modified Machines it is the same group! Great people!
@shortroundChris4 ай бұрын
You gonna be here June 22nd with Modified Machines?
@CornerAfterCorner4 ай бұрын
Sold out I believe but if its not already full, we will most likely be there. We are also trying to go to some of the larger track days this year!
@shortroundChris4 ай бұрын
@@CornerAfterCorner there's like 2 or 3 spots left haha they're capping it at 60 slots
@CornerAfterCorner4 ай бұрын
@@shortroundChris We did manage to get in!
@shortroundChris3 ай бұрын
@CornerAfterCorner see yall there. Hopefully I can get my tires heat cycled by then
@_LuisS5 ай бұрын
Great work man. Bigger brakes are awesome. I always loved the HP2 calipers. Just do yourself a favour and get a proper jack. I know you had the axle stands but never trust those..
@ThatguyLFS26 ай бұрын
So I've got to rant about the convo at the start. The 99% of the town is completely behind the track operating on Sunday. It's a collective of about 8 out of state New Yorkers that live here during the summer that call themselves the "Lime Rock Citizens Council". They successfully blocked the track from adding unmuffled Sundays back in 2015 which ended up causing Skip Barber to sell the track. It's not all bad though, they shot themselves in the foot because Skip always agreed to never bring drifting to the track since he knew the council would just complain about the noise/tire smoke. Well the new owners have less of an ear to loan to this group and brought GridLife drifting in to make more money for the track. The council group actually attempted to launch an EPA investigation because they state that drifting is "tire burning" and not listed as approved usage for the race track. Last I knew, there wasn't any follow-up on the EPA complaint so I don't think they have a leg to stand on and the track is safe in it's current state for the time being. They are actually allowed to host events on Sunday after 1pm but the council group really prevents anything coming in. Without 1 or 2 Sundays opened up, I don't think we'll ever see IMSA back.
Пікірлер
Can't wait for next year!
Rad
Thank you!
Usw it to build double wish bone on a gokart grab aome scrap metal from a junkyard fad a chasis and grab some old motorcycle engine
What?
must protect sandwich at all costs 🫡
I cannot believe he didn’t break any of those light bulbs!!!!! 😂😂😂😂😂
I just installed one of these on Saturday and did nothing of the sort for that top bolt on the passenger side. I didn’t even use the hex bolts they provided! The instructions aren’t great. I used one of the brass colored bolts on the top for the passenger side, the shorter 30mm one. They include longer for bottom separate in the bracket kit. They do cover the passenger side in the instructions but say use the longer (but don’t) Good luck at the track
I hope you didn't put yours on the stiffer setting because that ended up being a mistake for me!
@@CornerAfterCorner haha, good to know! I thought about!
Kenny, that vent is the biggest atrocity that I've ever seen in the automotive community, and as a matter of fact, any other community as well.
Next time you should try a brake line spanner.
I honestly can't tell if you're being serious but that is essentially what we created. A 22mm flare nut wrench
@@CornerAfterCorner sorry brother forgot the USA hasn’t figured out the metric system yet pretty common here x
All that room to work and you struggled?
WHAT ROOM
Oh I see you thought I was taking out the front (pre cat) sensor...
Exactly, that wrench would spread and slip if the sensor was really tight. I know this from experience
“You won’t get this on the tool truck” *shows a Mac wrench. O sure they have those on the Mac truck, and o2 sockets… lol
That was a gift...
The tool truck won't sell that, because they already sell better tools for that.
Not at 1am!
Heat it up.
Couldn't get the torch in there either! It sits down behind the engine next to the firewall, and about 10000 other wires...
@@CornerAfterCorner Ahhhh yea, I suppose I wouldn’t risk that either. It’s hard to tell from the video.
They sell a socket for that and they usually work good. It has 5 sides and one side is open for the wire. Make sure you put a tiny bit of copper antisieze on the new one.
I would have used mine if it would fit...
@@CornerAfterCorner fair enough, I stand corrected.
Get a smaller rachet so you are not hitting the ground
Its not?
Number of metric sets omits the 18mm
Same
3/4
3/4 is 19, not 18. 18 would be about 23/32.
I would like to point out that it actually was an 18 I'm just an idiot!
@@CornerAfterCorner same here. It takes me to look through my whole tool box to find the right size.
Hey sick video me!
Thanks me!
Can you elaborate the format of this event? Is there a limit of runs per driver? Or is the course just open for the day and go as you please?
Sure thing! The event is held from 8 to in this case 2:00 that seems to be different for every event depending on other activities going on at the track for the day but you get to run as many times as you want. You just go on the course for a few laps if you seem like you know what you're doing they seem to keep you out for longer but if you look like you're being dangerous than they'll take you off sooner. When they point you off the track you can just get back in line. Events have been limited to 60 or so people so people get more seat time
Will be there with the same Host June 22, yall going too?
June 22nd we are going to Canaan Motor Club for our first HPDE so we will not be there, but if the event is being held by Modified Machines it is the same group! Great people!
You gonna be here June 22nd with Modified Machines?
Sold out I believe but if its not already full, we will most likely be there. We are also trying to go to some of the larger track days this year!
@@CornerAfterCorner there's like 2 or 3 spots left haha they're capping it at 60 slots
@@shortroundChris We did manage to get in!
@CornerAfterCorner see yall there. Hopefully I can get my tires heat cycled by then
Great work man. Bigger brakes are awesome. I always loved the HP2 calipers. Just do yourself a favour and get a proper jack. I know you had the axle stands but never trust those..
So I've got to rant about the convo at the start. The 99% of the town is completely behind the track operating on Sunday. It's a collective of about 8 out of state New Yorkers that live here during the summer that call themselves the "Lime Rock Citizens Council". They successfully blocked the track from adding unmuffled Sundays back in 2015 which ended up causing Skip Barber to sell the track. It's not all bad though, they shot themselves in the foot because Skip always agreed to never bring drifting to the track since he knew the council would just complain about the noise/tire smoke. Well the new owners have less of an ear to loan to this group and brought GridLife drifting in to make more money for the track. The council group actually attempted to launch an EPA investigation because they state that drifting is "tire burning" and not listed as approved usage for the race track. Last I knew, there wasn't any follow-up on the EPA complaint so I don't think they have a leg to stand on and the track is safe in it's current state for the time being. They are actually allowed to host events on Sunday after 1pm but the council group really prevents anything coming in. Without 1 or 2 Sundays opened up, I don't think we'll ever see IMSA back.