Thank you for actually doing the leg work and showing us real time stats. Very informative. Thank you so much for this video. Everyone should watch this video!
@GavinProcter7 күн бұрын
Thank you worked like charm after ad blu warning and engine light came on even after refilling 😊
@jimbo572817 күн бұрын
Where is the purolator boss PBL11403? No review is complete with out it!
@Jodyrides18 күн бұрын
I buy my Yamaha royal star venture used. It had 30,000 miles on it, and it had K & N stock replacement air filters, there are two air filters on these machines. I have a video on my KZread channel, Yamaha royal star venture major flaw is the title of it. In that video, I pointed out all the filth and dust inside my intake system. I was blaming that on loosefitting plumbing of the intake system to the carburetors. But it turned out to be the K and N Eric layers were leading all of that dirt in… I have another video pointing out what I would do if I were anyone watching the video that had KNN air filters in their machine. They may pass more air which they do in testing, but, they also let more than 10 times the dirt get in. A KZreadr with a website called project farm prove that by sifting flour into a box with a vacuum below the box, pulling air through the filters in a comparison with a meter that measured particulates that go through the filters. The K and N oiled air filter was the one that passed the most air, and the most Particulates
@polandsprings2123 күн бұрын
But does it void the warranty? Yea or no? Lol
@THESLlCK24 күн бұрын
I'm ordering the 430. Any supporting mods you recommend? How hard is the install?
@baloosd24 күн бұрын
why so many blanks on row 15?
@SergeZ0724 күн бұрын
For me it helps - 7 times turn on/off, then start the engine and turn the steering wheel completely first right then left. All warnings have gone
@Nitrocity71517 күн бұрын
This did it for me thank you
@MattieXMoto26 күн бұрын
Seller: K5 GSXR 750 FOR SALE. mint! Never raced. Buyer: what type of filter? Seller: only the best K&N Buyer: it's pretty but I will keep looking.
@obaidahessam1640Ай бұрын
wow that's amazing .. what about software tune and installation Accessories , should i run on bigger intercooler? Thanks .
@C_C-Ай бұрын
Or you could plug in your code reader and clear the codes, they're dirt cheap
@williamdamsel8223Ай бұрын
Does not still work, tried twice...
@joeyd241Ай бұрын
this guy is literally telling you how to unleash the demon.
@mannymanuel1618Ай бұрын
Nice been looking at those potenza sports for the guila great review
@smoovv2149Ай бұрын
Fixed my etc that wouldn’t come off.. thank you soo much thank you
@fishingstix610Ай бұрын
Dont forget the velocity stack
@crimecentral775Ай бұрын
got the link to the jb4 you used ?
@Slimjim180Ай бұрын
Actually worked. Thank you sir!
@peterritchie4881Ай бұрын
Didn't think would work but it did! Engine light is gone and drive modes back after low battery troubles.
@romeitaly8524Ай бұрын
As soon as I saw Mahle and Mann case closed for me I live by the outstanding quality and performance by Mann I am beyond shocked the people for real use a fram oil filter $1 from Walmart in these cars never in hell could I do that
@Alienated802 ай бұрын
What is the word on the Royal Purple oil filter? I am hearing that the Royal Purple is the way to go.
Great review! I have been trying to figure out which pad to get for this street/sprited driving for my new 4 piston bbk. I was comparing amongst many of those companies you mentioned and the Powerstop Z23 seem to be the best all around pad. As you said, it also comes down to tire grip as well paired with the pads. I talked to a few others and they said it's held up on the Tail of the Dragon and another on track. I also read on a Mazda 6 forum a guy AutoX/tracked the Z23 and they held up great. If I find the Z23 fade, then I will proceed with getting track oriented pads or just get track pads to swap.
@ExtremDIY2 ай бұрын
Fantastic video thank you for this. I just did a magnets on the oil video and was wondering about metal dust getting through the filter and here you have it.
@Mraltundas2 ай бұрын
Testi sanki hatalı test arka taraftan yapılmalıydı
@PrimeIsBack.2 ай бұрын
Wow! crazy what the jb4 can do for those times considering stock q2 is 5.1-5.4. can’t wait to pick up my giulia!
@3100fps2 ай бұрын
Eye opening video on Mobil 1 filters. Was just about to buy one.
@DT-yt2zh2 ай бұрын
The only issue here is the surface area is only a factor depending on what it can capture and what it lets through. Need more than a visual test to determine which media is the best.
@Greenfreedom20242 ай бұрын
Waste of time video
@Greenfreedom20242 ай бұрын
Where is the video on battery disconnect
@AngelofDeath2All2 ай бұрын
Thanks 1 million times. I had to disconnect the battery and all bells and whistles came on during start up. It worked!
@cjeevs2 ай бұрын
The video could be misleading. You need to show whether the filters were oiled as required. The video seems like the filters were dry, which is not the right way to use these filters
@cjeevs2 ай бұрын
The filters shown here were oiled?
@carlo49712 ай бұрын
Gracias
@stephanmoney74932 ай бұрын
What is the accessory mode
@sassysweetnugget2 ай бұрын
After I got a oil change this is the only thing that worked. Thank you.
@Poppa_822 ай бұрын
Wtf is a nanny
@autobody_experience2 ай бұрын
I do believe that you have to have Mag ride mine does not and have not yet been able to get it to launch
@wyomingmachinedesign74833 ай бұрын
I like what I see regarding the Mahle filter but when I search I can only find Mahle filters made in Mexico, not Austria. Can you steer me in the right direction, maybe share where you're buying Austrian produced Mahle? Thanks
@markwarnberg95043 ай бұрын
Those Mobil 1s look like they were made in Pakistan by little kids.
@TheCvac3 ай бұрын
I am thinking of getting this petrol version but i make 700 km trips regularly. How much does it drink at 120/130 kmh? The diesel version seems underpowered
@Chuck-tq3kq3 ай бұрын
That’s Normal
@andrascz89733 ай бұрын
It shouldn't bother you. My Alfa 159 jtd has the same noise since I have it from 2010. It works like a charm. It's normal trust me.
@ohhyesitsonlyme3 ай бұрын
An absolute life saver 👍👍🫡🫡. Dead battery on my Stelvio Quadrifoglio- tons of warning codes!! Battery recharged and reconditioned, did the start/stop, accessories press x7, steering wheel left and right and bingo, codes gone, mode selector working as it should and engine warning light off. 👌👌🫡🫡👍👍
@scooby00003 ай бұрын
Conclusion. Stay with the paperfilter. They still doing the job good enough. But change them every year.
@sychodefender3 ай бұрын
Hi, I need to programme out PASM as I have standard coilovers now. I'm told this is possible via programming/gateway. Wondering if you could take a look at yours please and let me know the available menu options please. Many thanks Simon
@darklifedudemax50683 ай бұрын
Why didn't you do a 0-60 before and after adding JB4?
@RobertZinn3 ай бұрын
For clarity, I would rename this video as "C8 Dashboard's Performance Timer" and not the PDR. They are two different things. The 2LT, 3LT have a PDR video with a timer overlay that provides times that, many times, differ from the dashboard's Performance Timer. That said, they are both inaccurate and sometimes off by 0.3 seconds when compared to the Dragy. I cannot explain why two timers (dashboard performance timer, and the PDR's video timer) on the same car would produce different times. There are two standard timings for 0-60mph, One with a 1-foot rollout, and one without. Car and Driver, Motor Trend rate cars including the C8 with the 1-foot rollout. The 1-foot rollout time is also used at NHRA drag strips. Even though the Dashboard timer and the PDR video times are inaccurate, they are more close to the 1-ft rollout. The Dragy DRG70 models do show both the 0-60 with and without the 1-ft rollout. There is also PC Windows Cosworth Toolbox software that reads the PDR's mp4 video file and accurately will show the 0-60 without rollout. Another PC Windows PI Toolbox software allows you to analyze a Launch run to 1/100th of a second and you can determine accurate the 0-60 times with and without the 1-ft rollout that is as accurate and very comparable to the Dragy times reported. I have found the difference is normally between 0.033s and 0.12. It is hard to say which is more accurate between the Dragy and the PI Toolbox calculations since they are both both based on GPS and subject to errors based on the number of satellites and other factors. Many factors are involved to obtain good times. Things like weight and number of passengers, road surface, type of tires, road temps, tire temps, and fluid temps, Altitude, Density Altitude, and fuel levels and octane. Some ask if anyone has 0-60 numbers under 3 seconds for their C8. Car and Driver has rated the C8 Z51 Coupe at 2.8s. The heavier C8 Z51 with summer tires is rates at 3.0. My heavy, Non-Z51 C8 HTC with the performance exhaust and all season tires has clocked 2.95s confirmed by both the Dragy and the PDR data using the PI Toolbox software. I have clocked 3.0 seconds with two heavy passengers. None of these numbers are based on the Dashboard timer or the PDR's Video displayed times. They are based on Dragy and the PI Toolbox.
@Ybshy3 ай бұрын
Very informative video, this is the direction I want to go with, what did this whole build cost you?
Пікірлер
Thank you for actually doing the leg work and showing us real time stats. Very informative. Thank you so much for this video. Everyone should watch this video!
Thank you worked like charm after ad blu warning and engine light came on even after refilling 😊
Where is the purolator boss PBL11403? No review is complete with out it!
I buy my Yamaha royal star venture used. It had 30,000 miles on it, and it had K & N stock replacement air filters, there are two air filters on these machines. I have a video on my KZread channel, Yamaha royal star venture major flaw is the title of it. In that video, I pointed out all the filth and dust inside my intake system. I was blaming that on loosefitting plumbing of the intake system to the carburetors. But it turned out to be the K and N Eric layers were leading all of that dirt in… I have another video pointing out what I would do if I were anyone watching the video that had KNN air filters in their machine. They may pass more air which they do in testing, but, they also let more than 10 times the dirt get in. A KZreadr with a website called project farm prove that by sifting flour into a box with a vacuum below the box, pulling air through the filters in a comparison with a meter that measured particulates that go through the filters. The K and N oiled air filter was the one that passed the most air, and the most Particulates
But does it void the warranty? Yea or no? Lol
I'm ordering the 430. Any supporting mods you recommend? How hard is the install?
why so many blanks on row 15?
For me it helps - 7 times turn on/off, then start the engine and turn the steering wheel completely first right then left. All warnings have gone
This did it for me thank you
Seller: K5 GSXR 750 FOR SALE. mint! Never raced. Buyer: what type of filter? Seller: only the best K&N Buyer: it's pretty but I will keep looking.
wow that's amazing .. what about software tune and installation Accessories , should i run on bigger intercooler? Thanks .
Or you could plug in your code reader and clear the codes, they're dirt cheap
Does not still work, tried twice...
this guy is literally telling you how to unleash the demon.
Nice been looking at those potenza sports for the guila great review
Fixed my etc that wouldn’t come off.. thank you soo much thank you
Dont forget the velocity stack
got the link to the jb4 you used ?
Actually worked. Thank you sir!
Didn't think would work but it did! Engine light is gone and drive modes back after low battery troubles.
As soon as I saw Mahle and Mann case closed for me I live by the outstanding quality and performance by Mann I am beyond shocked the people for real use a fram oil filter $1 from Walmart in these cars never in hell could I do that
What is the word on the Royal Purple oil filter? I am hearing that the Royal Purple is the way to go.
MWR kzread.info/dash/bejne/p5lnxraufqWnoMY.htmlsi=9tdJKl1k_sRtSFHR
Best tutorial of all time ❤
Great review! I have been trying to figure out which pad to get for this street/sprited driving for my new 4 piston bbk. I was comparing amongst many of those companies you mentioned and the Powerstop Z23 seem to be the best all around pad. As you said, it also comes down to tire grip as well paired with the pads. I talked to a few others and they said it's held up on the Tail of the Dragon and another on track. I also read on a Mazda 6 forum a guy AutoX/tracked the Z23 and they held up great. If I find the Z23 fade, then I will proceed with getting track oriented pads or just get track pads to swap.
Fantastic video thank you for this. I just did a magnets on the oil video and was wondering about metal dust getting through the filter and here you have it.
Testi sanki hatalı test arka taraftan yapılmalıydı
Wow! crazy what the jb4 can do for those times considering stock q2 is 5.1-5.4. can’t wait to pick up my giulia!
Eye opening video on Mobil 1 filters. Was just about to buy one.
The only issue here is the surface area is only a factor depending on what it can capture and what it lets through. Need more than a visual test to determine which media is the best.
Waste of time video
Where is the video on battery disconnect
Thanks 1 million times. I had to disconnect the battery and all bells and whistles came on during start up. It worked!
The video could be misleading. You need to show whether the filters were oiled as required. The video seems like the filters were dry, which is not the right way to use these filters
The filters shown here were oiled?
Gracias
What is the accessory mode
After I got a oil change this is the only thing that worked. Thank you.
Wtf is a nanny
I do believe that you have to have Mag ride mine does not and have not yet been able to get it to launch
I like what I see regarding the Mahle filter but when I search I can only find Mahle filters made in Mexico, not Austria. Can you steer me in the right direction, maybe share where you're buying Austrian produced Mahle? Thanks
Those Mobil 1s look like they were made in Pakistan by little kids.
I am thinking of getting this petrol version but i make 700 km trips regularly. How much does it drink at 120/130 kmh? The diesel version seems underpowered
That’s Normal
It shouldn't bother you. My Alfa 159 jtd has the same noise since I have it from 2010. It works like a charm. It's normal trust me.
An absolute life saver 👍👍🫡🫡. Dead battery on my Stelvio Quadrifoglio- tons of warning codes!! Battery recharged and reconditioned, did the start/stop, accessories press x7, steering wheel left and right and bingo, codes gone, mode selector working as it should and engine warning light off. 👌👌🫡🫡👍👍
Conclusion. Stay with the paperfilter. They still doing the job good enough. But change them every year.
Hi, I need to programme out PASM as I have standard coilovers now. I'm told this is possible via programming/gateway. Wondering if you could take a look at yours please and let me know the available menu options please. Many thanks Simon
Why didn't you do a 0-60 before and after adding JB4?
For clarity, I would rename this video as "C8 Dashboard's Performance Timer" and not the PDR. They are two different things. The 2LT, 3LT have a PDR video with a timer overlay that provides times that, many times, differ from the dashboard's Performance Timer. That said, they are both inaccurate and sometimes off by 0.3 seconds when compared to the Dragy. I cannot explain why two timers (dashboard performance timer, and the PDR's video timer) on the same car would produce different times. There are two standard timings for 0-60mph, One with a 1-foot rollout, and one without. Car and Driver, Motor Trend rate cars including the C8 with the 1-foot rollout. The 1-foot rollout time is also used at NHRA drag strips. Even though the Dashboard timer and the PDR video times are inaccurate, they are more close to the 1-ft rollout. The Dragy DRG70 models do show both the 0-60 with and without the 1-ft rollout. There is also PC Windows Cosworth Toolbox software that reads the PDR's mp4 video file and accurately will show the 0-60 without rollout. Another PC Windows PI Toolbox software allows you to analyze a Launch run to 1/100th of a second and you can determine accurate the 0-60 times with and without the 1-ft rollout that is as accurate and very comparable to the Dragy times reported. I have found the difference is normally between 0.033s and 0.12. It is hard to say which is more accurate between the Dragy and the PI Toolbox calculations since they are both both based on GPS and subject to errors based on the number of satellites and other factors. Many factors are involved to obtain good times. Things like weight and number of passengers, road surface, type of tires, road temps, tire temps, and fluid temps, Altitude, Density Altitude, and fuel levels and octane. Some ask if anyone has 0-60 numbers under 3 seconds for their C8. Car and Driver has rated the C8 Z51 Coupe at 2.8s. The heavier C8 Z51 with summer tires is rates at 3.0. My heavy, Non-Z51 C8 HTC with the performance exhaust and all season tires has clocked 2.95s confirmed by both the Dragy and the PDR data using the PI Toolbox software. I have clocked 3.0 seconds with two heavy passengers. None of these numbers are based on the Dashboard timer or the PDR's Video displayed times. They are based on Dragy and the PI Toolbox.
Very informative video, this is the direction I want to go with, what did this whole build cost you?