Thank you so much for this vid! Very much appreciated. My 09 Outback license plate light wiring went bad so i still be doing exactly what you showed. Do you know what wire size the 09 Outback uses in these two harnesses ?
@joequillun779017 сағат бұрын
I made the mistake of removing the pulley. Didn't know it was under spring pressure. Now the shaft E-ring groove is too shallow. How do I pull the shaft up, to engage the E ring? Any help is appreciated. Obviously no one else has ever done this, cause I can't find a video how to install. Thanks for any advice.
@cameronr722323 сағат бұрын
Just did it on 2013 f-250, thank you
@natestain71032 күн бұрын
Thanks. This is my project today because our 2 year old likes to scatter litter everywhere!!! Yay!!
@MistaClassic3 күн бұрын
Worked perfectly, Thank You
@TryAltF44 күн бұрын
I know this was posted 6 years ago, but thanks for helping me replace my pressure switch. This video helped 100%. luckily solved my problem.
@maxwellchiu99345 күн бұрын
Excellent video
@user-lh6gg5tl3t6 күн бұрын
We sell Mulching Blades that may fit your equipment. We're happy to offer you the product completely free of charge in exchange for a video review. Let me know if you are interested.
@redelf19686 күн бұрын
I had to remove my fuse to the keyless entry system as I didn't have a programmed fob and the alarm was in activate mode. Learned from your video that I have to unlock all doors including the hatch so that the alarm wouldn't go off and then I was able to program it. Thanks a bunch for the great video.
@joequillun77907 күн бұрын
Good video. Was hoping for an easy fix, but apparently not. Maybe some-one will invent a pilot for the top of the drum.
@PamelaRosensteel8 күн бұрын
Thank you! We had someone install a new sink maybe a couple years ago and this was the second time one of these had to be replaced. I decided to just do it myself instead of paying him to replace it yet again. Your video was very helpful!
@petexii9 күн бұрын
W This worked great on my 2010 Forester. Thank you so much for your clear and quick explanation! Some sweet relief from the gimmicky hypey KZread style.
@deeblessed15889 күн бұрын
Thanx Dude, I just broke my plastic clear one and I have the porcelian ends, I will order one off of Amazon Now and cut it. Whew, Thanx 😀
@alexandrasalisbury64019 күн бұрын
IT WORKED FOR MY 2020 SUBARU FORESTER!! 💪🏼
@danno-dw6ub9 күн бұрын
Great video. At around the 9 min mark I had to stop and put electical tape around the positive battery tending connector as I sparked out a few times.
@aliciamayacruz-olivo50569 күн бұрын
Thank you. I am going to attempt this for my windows
@timthoms78410 күн бұрын
Any advice on how i can get the cartridge out as the stem broke and the plastic piece to loosen the cartridge does nothing. It is in real well and nothing i do seems to loosen it.
@josuegalvez111 күн бұрын
Thanks man
@rppwoodworking12311 күн бұрын
Just did my 2014 f350 works great ty
@reeceprice12 күн бұрын
Westinghouse 1500, yes but why not the Generac GP 15,500 EFI
@DanielWOstler13 күн бұрын
Very Well Done!
@user-yd1vl9lj5j13 күн бұрын
Because of twits like this, slow speed zone could soon be established around Port Miami as Coast Guard cites increasing number of incidents.
@EverettPallets13 күн бұрын
Great video. I can return the $15 drain wrench and use my channel locks! Thanks for the tips!
@tony336114 күн бұрын
Did not work for me I don't have a program key
@cefarther394514 күн бұрын
I cannot get the brass washer off the pipe, that is what I was hoping you would demonstrate.
@jrcapostol990916 күн бұрын
Thank you!
@TheDIYGuyDOTnet15 күн бұрын
You're welcome, Glad we could help. Thanks for watching and taking the time to leave us a comment.
@Soundman196316 күн бұрын
What do you recommend if the spout comes off, but the copper collar is stuck to the cast iron (galvanized) pipe? There's some rust on the pipe. That was the case with mine. I put WD-40 on it, but it's still frozen. I don't want to turn it too hard because the pipe might snap off altogether. I was thinking of using a hand-held propane torch to apply some heat to it, but not sure if it's a good idea or not.
@TheDIYGuyDOTnet15 күн бұрын
I have found a product called Deep Creep by seafoam works really well on stuck stuff/ bolts you may want to try that. Applying some heat will also help. Good luck with getting it off.
@Jsf44516 күн бұрын
Thank you so much. Freaking thing was about to make me loose my mind. I have a work utility truck I drive around job sites like 2 mph. In and out constantly, no need for seat belt.
@TheDIYGuyDOTnet15 күн бұрын
You're welcome, Glad we could help. Thanks for watching and taking the time to leave us a comment.
@brettsmeltzer244717 күн бұрын
Thank You for posting! I thought I was in for a mess! The stopper handle had actually snapped off and there is no access panel behind the tub.I thought I was looking and replacing the entire pipe assembly. Thankfully, this is a Delta Faucet setup so after watching this video I’m hoping I can find the exact replacement assembly (as shown in your video) at my local hardware store. 👍👍👍👍
@TheDIYGuyDOTnet15 күн бұрын
No problem, Glad we could help. Thanks for watching and taking the time to leave us a comment and good luck with getting it replaced.
@CanuckMonkey17 күн бұрын
Hmm. What about if it’s not near a stud? Great video tho.
@TheDIYGuyDOTnet15 күн бұрын
If there is no stud there sometimes you can get some screws into the backer board or sheetrock just behind the tile and then get enough material / glue back there to get it to hold. Sometimes you can use some spray foam and build it up and give it something to attach to.
@nadiayala19 күн бұрын
I lost a key last year, got new one programmed. Currently I lost the new key but found the old one can I use the old key? 😭
@robertchavez548319 күн бұрын
I programed a new Dorman fob for my 2002 Forester and it worked like a charm! Thank you!
@stevec910220 күн бұрын
Lord people, all use aksin where to buy it. Amazon sells ‘em for $20. I have one installed for 10 years, two cats, still swinging nicely. I did eventually put four screws & nuts in the 4 corners, to insure it stays together for even a longer time period. Glue/caulk, just wont hold up over time. Even has a nice algae patina on the outside of it from rain beating against it. The one positive about this video is the guy does explain which groove is for fiberglass screen and which is for metal. That is why I watched it, as there are no markings on the plastic door indicating which is which.
@jackstand324 күн бұрын
Thanks, great video, good detail!
@RA-sv8lr24 күн бұрын
Bought my Mazda 2 from new 15 years ago now and I have lost count of the number of times I have watched your video to replace the batteries in my two fobs. It's saved me a packet! Dealer quoted me £25 each! Fantastic video, thank you!
@cyrilmarjgowler133824 күн бұрын
What on earth were you thinking putting your fingers that close to a moving saw blade???! Irresponsible at best!! Horribly unsafe!!
@m.sm.115924 күн бұрын
Worked great for 2003 Silverado
@user-nm8rk8ti6s25 күн бұрын
AWESOME!! THANK YOU!!
@captlightyear25 күн бұрын
This was a good video but I have one suggestion. Instead of tearing out the window, I simply drilled a hole above each screw and removed the screws, then the assembly. I inserted the new assembly and using the holes drilled, replaced the screws. Then I filled the holes with wood filler. Easy.
@bobj861126 күн бұрын
Great how to vid. I need the hose from tub to pump at 12:19. Does anyone have any ideas where I can get the hose?
@mgarde774827 күн бұрын
How do you turn off water lines? I know how to turn of the water coming into the house but uncertain how to turn off the hot water line going to the housr?
@ronwilson330Ай бұрын
Good video!
@GrotrianSeilerАй бұрын
I don’t have zone valves like in the video, or that little red box, so I don’t know if this video can help.
@nathanduke5323Ай бұрын
Didn't work. Thanks any way.
@amarimallett7505Ай бұрын
Ours works just fine just whenever I try to drain the tub. The lever won’t stay down. It keeps going back up and not draining.
@corygreenwood384Ай бұрын
Why did you measure it to put the screws in
@kendallscott9256Ай бұрын
What if u don’t cut the wires
@epixtx0183Ай бұрын
I thought mine was leaking at the lower element gasket, but I looks like it is the flange the element screws into that is leaking, Is this repairable?
@user-pc3xb4hd8iАй бұрын
Thank u and your video is less than 3 minutes!!! So sick of the unnecessary 10 minute videos!
Пікірлер
Thank you so much for this vid! Very much appreciated. My 09 Outback license plate light wiring went bad so i still be doing exactly what you showed. Do you know what wire size the 09 Outback uses in these two harnesses ?
I made the mistake of removing the pulley. Didn't know it was under spring pressure. Now the shaft E-ring groove is too shallow. How do I pull the shaft up, to engage the E ring? Any help is appreciated. Obviously no one else has ever done this, cause I can't find a video how to install. Thanks for any advice.
Just did it on 2013 f-250, thank you
Thanks. This is my project today because our 2 year old likes to scatter litter everywhere!!! Yay!!
Worked perfectly, Thank You
I know this was posted 6 years ago, but thanks for helping me replace my pressure switch. This video helped 100%. luckily solved my problem.
Excellent video
We sell Mulching Blades that may fit your equipment. We're happy to offer you the product completely free of charge in exchange for a video review. Let me know if you are interested.
I had to remove my fuse to the keyless entry system as I didn't have a programmed fob and the alarm was in activate mode. Learned from your video that I have to unlock all doors including the hatch so that the alarm wouldn't go off and then I was able to program it. Thanks a bunch for the great video.
Good video. Was hoping for an easy fix, but apparently not. Maybe some-one will invent a pilot for the top of the drum.
Thank you! We had someone install a new sink maybe a couple years ago and this was the second time one of these had to be replaced. I decided to just do it myself instead of paying him to replace it yet again. Your video was very helpful!
W This worked great on my 2010 Forester. Thank you so much for your clear and quick explanation! Some sweet relief from the gimmicky hypey KZread style.
Thanx Dude, I just broke my plastic clear one and I have the porcelian ends, I will order one off of Amazon Now and cut it. Whew, Thanx 😀
IT WORKED FOR MY 2020 SUBARU FORESTER!! 💪🏼
Great video. At around the 9 min mark I had to stop and put electical tape around the positive battery tending connector as I sparked out a few times.
Thank you. I am going to attempt this for my windows
Any advice on how i can get the cartridge out as the stem broke and the plastic piece to loosen the cartridge does nothing. It is in real well and nothing i do seems to loosen it.
Thanks man
Just did my 2014 f350 works great ty
Westinghouse 1500, yes but why not the Generac GP 15,500 EFI
Very Well Done!
Because of twits like this, slow speed zone could soon be established around Port Miami as Coast Guard cites increasing number of incidents.
Great video. I can return the $15 drain wrench and use my channel locks! Thanks for the tips!
Did not work for me I don't have a program key
I cannot get the brass washer off the pipe, that is what I was hoping you would demonstrate.
Thank you!
You're welcome, Glad we could help. Thanks for watching and taking the time to leave us a comment.
What do you recommend if the spout comes off, but the copper collar is stuck to the cast iron (galvanized) pipe? There's some rust on the pipe. That was the case with mine. I put WD-40 on it, but it's still frozen. I don't want to turn it too hard because the pipe might snap off altogether. I was thinking of using a hand-held propane torch to apply some heat to it, but not sure if it's a good idea or not.
I have found a product called Deep Creep by seafoam works really well on stuck stuff/ bolts you may want to try that. Applying some heat will also help. Good luck with getting it off.
Thank you so much. Freaking thing was about to make me loose my mind. I have a work utility truck I drive around job sites like 2 mph. In and out constantly, no need for seat belt.
You're welcome, Glad we could help. Thanks for watching and taking the time to leave us a comment.
Thank You for posting! I thought I was in for a mess! The stopper handle had actually snapped off and there is no access panel behind the tub.I thought I was looking and replacing the entire pipe assembly. Thankfully, this is a Delta Faucet setup so after watching this video I’m hoping I can find the exact replacement assembly (as shown in your video) at my local hardware store. 👍👍👍👍
No problem, Glad we could help. Thanks for watching and taking the time to leave us a comment and good luck with getting it replaced.
Hmm. What about if it’s not near a stud? Great video tho.
If there is no stud there sometimes you can get some screws into the backer board or sheetrock just behind the tile and then get enough material / glue back there to get it to hold. Sometimes you can use some spray foam and build it up and give it something to attach to.
I lost a key last year, got new one programmed. Currently I lost the new key but found the old one can I use the old key? 😭
I programed a new Dorman fob for my 2002 Forester and it worked like a charm! Thank you!
Lord people, all use aksin where to buy it. Amazon sells ‘em for $20. I have one installed for 10 years, two cats, still swinging nicely. I did eventually put four screws & nuts in the 4 corners, to insure it stays together for even a longer time period. Glue/caulk, just wont hold up over time. Even has a nice algae patina on the outside of it from rain beating against it. The one positive about this video is the guy does explain which groove is for fiberglass screen and which is for metal. That is why I watched it, as there are no markings on the plastic door indicating which is which.
Thanks, great video, good detail!
Bought my Mazda 2 from new 15 years ago now and I have lost count of the number of times I have watched your video to replace the batteries in my two fobs. It's saved me a packet! Dealer quoted me £25 each! Fantastic video, thank you!
What on earth were you thinking putting your fingers that close to a moving saw blade???! Irresponsible at best!! Horribly unsafe!!
Worked great for 2003 Silverado
AWESOME!! THANK YOU!!
This was a good video but I have one suggestion. Instead of tearing out the window, I simply drilled a hole above each screw and removed the screws, then the assembly. I inserted the new assembly and using the holes drilled, replaced the screws. Then I filled the holes with wood filler. Easy.
Great how to vid. I need the hose from tub to pump at 12:19. Does anyone have any ideas where I can get the hose?
How do you turn off water lines? I know how to turn of the water coming into the house but uncertain how to turn off the hot water line going to the housr?
Good video!
I don’t have zone valves like in the video, or that little red box, so I don’t know if this video can help.
Didn't work. Thanks any way.
Ours works just fine just whenever I try to drain the tub. The lever won’t stay down. It keeps going back up and not draining.
Why did you measure it to put the screws in
What if u don’t cut the wires
I thought mine was leaking at the lower element gasket, but I looks like it is the flange the element screws into that is leaking, Is this repairable?
Thank u and your video is less than 3 minutes!!! So sick of the unnecessary 10 minute videos!
Why dont you just remove the belt from the start?