Thank You for sharing!!! 🙂🤜👍 I didn't know if the main actuator was my problem but you describe adjusting the temperature. My w16303ml500 distributes the airflow incorrectly between defrost and central vents.
@its-andrew-y15 сағат бұрын
one of the local guys was wheeling and forgot to turn it off, i saw the video of him getting popped with the side airbags on a hill
@RaynJaniceWhiteКүн бұрын
We had yo turn out headlights on to get it work.
@RaynJaniceWhiteКүн бұрын
*to
@jewelsnewman42522 күн бұрын
The "s" puts it in slow mode, much safer to begin with! This thing takes OFF and if you're not expecting it, it can get away from you! Mine has a crack in the front from my first attempt at riding It! I got mine barely used also for $1500.
@photographer1283 күн бұрын
I piled up a bunch of drop cloths outside my car up to door level so most of my body was outside the car. One of my legs was up in the window.
@alexcampanelli4 күн бұрын
Good job and thanks for the video. Alexandre (Rio de Janeiro).
@instantsiv4 күн бұрын
For the people saying to chock the front of the rear tire… chocks come in pairs for a reason. You chock both the front and the rear of the same tire.
@Seaner_05 күн бұрын
I live at East Wenatchee
@neroh76878 күн бұрын
thats a nice looking truck man!
@jimmyjames777011 күн бұрын
Thanks for the idea I appreciate it just had my Pelican gave it to me for free and I'm psyched about it I'm going to set this thing up
@ryanjoswick542616 күн бұрын
Thanks for posting the video Jim. Very helpful. Did your RX have the tow package before you plugged in the part referenced in the video? My RX350 has the white connector like in your video, and 30amp tow fuse, but I am trying to determine if I also need a converter module to power the trailer lights.
@drivewaygarage156115 күн бұрын
I put the hitch on myself
@devonharris541417 күн бұрын
Car was idling crazy got it fixed for $28 bucks thanks for the video.
@doriancruz836117 күн бұрын
Fuking Dodge , I hate this kind a car
@sabayafilmindustries384318 күн бұрын
I dint trust that wheel just hanging even if the brakes are engaged
@heartsobs165920 күн бұрын
Appreciate the video thanks fam!
@barenekid969520 күн бұрын
Have same Metal mesh Matrix in My Saab Catalytic. It's Horrid stuff to work with. Ceramic Matrix types... shatter /come apart /out with only a few minutes work. Tried to core out the centre First... but Spade bit drills.. Don't work ...Neither do Hole saws. Only ruined the bits. Crow bars (many sizes and weight)..simply dents the stuff. Considering a Long 16" Chisel head on my Air Hammer. Might ? work . Problem is it's ~50$ to buy . BUT having a shop weld in a straight pipe in place of the Catalytic would cost similar.
@TheStevedie21 күн бұрын
Great video. I ordered a filter and fluid for my 33 ton troy bilt a few months ago. I plan to drain and replace this week. I mine as well replace the engine oil and spark plug while I'm at it.
@ItsCalvin721 күн бұрын
Do you have to run a ground wire?
@ItsCalvin721 күн бұрын
Do you have to run a ground wire? Or is that unnecessary?
@bernardcarroll561023 күн бұрын
I never trust ramps but if I must, I’ll jack the car up place one ramp facing forward & the other ramp facing the rear
@wolfeman755825 күн бұрын
Next video u need to speak up more bro. Sounds like ur whispering
@joegilbody487826 күн бұрын
When I was redoing my kitchen in Providence I learned to adjust recipes and cook everything in microwave.
@johnautry685126 күн бұрын
You rock! Seat out now. You saved me hours. cheers!
@GriffinLyons-rw7hg26 күн бұрын
What is the width of the pvc
@drivewaygarage156126 күн бұрын
I don't remember . Maybe 3/4"
@GriffinLyons-rw7hg26 күн бұрын
@@drivewaygarage1561 thankyou I figured it out by searching your page in a different video you said you used 3/4 to connect them
@johnsellers962326 күн бұрын
That tip with the screwdriver for air, I feel pretty stupid because I must have put oil in different things and machines probably over a thousand times in all my years, and to think how many times I had to wait to pour to let the oil go down. Good tip my friend. Something so simple that I can’t believe I didn’t make a habit of doing every single time. ✌️👍🇺🇸
@MikeJones-rk1un28 күн бұрын
Changing the fluid is $8/qt. Thanks Joe Biden. FJB
@suzy_the_cockatoo28 күн бұрын
O'Reilly's charged me six times for an alternator and my bank had to do a fraud investigation on them because they sd they only had one charge. Don't trust O'Reillys
@morgannordahl4355Ай бұрын
Great idea! Thanks!
@cassiebrooks7025Ай бұрын
My engine started slipping when i turn the car on my rpms are below 1 does it mean im low
@maskmite1Ай бұрын
I’m a girl and I did it in about 2 1/2 hours without taking all that stuff out. All you need is the proper tools and a flexible extension.
@ceesnabuursfauna2115Ай бұрын
Same here, I do have a 2010 outback. I think the reflectors are bad, new bulbs do not solve the issue. We use also the brights.
@Oceansky521Ай бұрын
That fan motor is bad. The gears are worn so replace it
@shondablack6835Ай бұрын
Did u find out the seat belt light problem if so do share 😊
@scrappy93Ай бұрын
I would use something other than normal wd-40 and use a dry lube.
@craigellis0Ай бұрын
This is going to help me a lot when I get the time to take care of this on my pickup.
@itookyocvvАй бұрын
Is there a switch to turn off the air ride before lifting it?
@spiritofeverlastingenduranceАй бұрын
I just bought a 2015 Outback. I am new to the make. Its been 4k miles since i drove it home. I just got a low oil light. I was going to rush to make a service appointment. Now, I am considering doing the oil change myself. I just watched your other video on changing the oil. Thanks. It seems straightforward not complicated. Quick tip: my neighbor would save large boxes or plywood to place under the vehicle to do fluid changes.
@spiritofeverlastingenduranceАй бұрын
Very helpful. Thanks
@DonaldJunior-bf2stАй бұрын
Below the starter is your crankshaft position sensor change that and see what happens
@norris.7670Ай бұрын
Motor bearings are bad get new one.
@Mikiein909Ай бұрын
Thank you
@alkshy8350Ай бұрын
its the traction control thing. I have a 2012 avenger, I have no clue about cars but when that light is on it drives like this, usually after taking a turn too sharply or something is when mine turns on and starts acting like this.
@slickmouf879Ай бұрын
Why did you end up selling your boat?
@marvinpineda8693Ай бұрын
I encountered that same problem with a MINI Cooper and a Craftsman ⅜” spark plug socket as well. I _just_ had to change the plugs on a Hyundai today and remembered, so I cleaned them with brake cleaner and wrapped the socket & extension ends with Gorilla tape to make sure they’d stay on. Worked out.
@VermillionRacingАй бұрын
This defeats the purpose of using the ramps over jack stands
@kotax7Ай бұрын
Make sure you chock the front rear wheel since its flipped.
@DELOS13Ай бұрын
what if you used the wrong length size socket, too short?
@EvelynHernandez-mp8gnАй бұрын
Plz do call the cops on them
@lastsaiyanleftАй бұрын
at 3:08 is where i am having issues. I replaced the plastic clip on the rod and put that in the hole. but the bottom end of the rod is suppose to go beside that other rod shown in 3:08 but mine is super loose. a couple of turns on the door key and it comes off. any help?
Пікірлер
Thank You for sharing!!! 🙂🤜👍 I didn't know if the main actuator was my problem but you describe adjusting the temperature. My w16303ml500 distributes the airflow incorrectly between defrost and central vents.
one of the local guys was wheeling and forgot to turn it off, i saw the video of him getting popped with the side airbags on a hill
We had yo turn out headlights on to get it work.
*to
The "s" puts it in slow mode, much safer to begin with! This thing takes OFF and if you're not expecting it, it can get away from you! Mine has a crack in the front from my first attempt at riding It! I got mine barely used also for $1500.
I piled up a bunch of drop cloths outside my car up to door level so most of my body was outside the car. One of my legs was up in the window.
Good job and thanks for the video. Alexandre (Rio de Janeiro).
For the people saying to chock the front of the rear tire… chocks come in pairs for a reason. You chock both the front and the rear of the same tire.
I live at East Wenatchee
thats a nice looking truck man!
Thanks for the idea I appreciate it just had my Pelican gave it to me for free and I'm psyched about it I'm going to set this thing up
Thanks for posting the video Jim. Very helpful. Did your RX have the tow package before you plugged in the part referenced in the video? My RX350 has the white connector like in your video, and 30amp tow fuse, but I am trying to determine if I also need a converter module to power the trailer lights.
I put the hitch on myself
Car was idling crazy got it fixed for $28 bucks thanks for the video.
Fuking Dodge , I hate this kind a car
I dint trust that wheel just hanging even if the brakes are engaged
Appreciate the video thanks fam!
Have same Metal mesh Matrix in My Saab Catalytic. It's Horrid stuff to work with. Ceramic Matrix types... shatter /come apart /out with only a few minutes work. Tried to core out the centre First... but Spade bit drills.. Don't work ...Neither do Hole saws. Only ruined the bits. Crow bars (many sizes and weight)..simply dents the stuff. Considering a Long 16" Chisel head on my Air Hammer. Might ? work . Problem is it's ~50$ to buy . BUT having a shop weld in a straight pipe in place of the Catalytic would cost similar.
Great video. I ordered a filter and fluid for my 33 ton troy bilt a few months ago. I plan to drain and replace this week. I mine as well replace the engine oil and spark plug while I'm at it.
Do you have to run a ground wire?
Do you have to run a ground wire? Or is that unnecessary?
I never trust ramps but if I must, I’ll jack the car up place one ramp facing forward & the other ramp facing the rear
Next video u need to speak up more bro. Sounds like ur whispering
When I was redoing my kitchen in Providence I learned to adjust recipes and cook everything in microwave.
You rock! Seat out now. You saved me hours. cheers!
What is the width of the pvc
I don't remember . Maybe 3/4"
@@drivewaygarage1561 thankyou I figured it out by searching your page in a different video you said you used 3/4 to connect them
That tip with the screwdriver for air, I feel pretty stupid because I must have put oil in different things and machines probably over a thousand times in all my years, and to think how many times I had to wait to pour to let the oil go down. Good tip my friend. Something so simple that I can’t believe I didn’t make a habit of doing every single time. ✌️👍🇺🇸
Changing the fluid is $8/qt. Thanks Joe Biden. FJB
O'Reilly's charged me six times for an alternator and my bank had to do a fraud investigation on them because they sd they only had one charge. Don't trust O'Reillys
Great idea! Thanks!
My engine started slipping when i turn the car on my rpms are below 1 does it mean im low
I’m a girl and I did it in about 2 1/2 hours without taking all that stuff out. All you need is the proper tools and a flexible extension.
Same here, I do have a 2010 outback. I think the reflectors are bad, new bulbs do not solve the issue. We use also the brights.
That fan motor is bad. The gears are worn so replace it
Did u find out the seat belt light problem if so do share 😊
I would use something other than normal wd-40 and use a dry lube.
This is going to help me a lot when I get the time to take care of this on my pickup.
Is there a switch to turn off the air ride before lifting it?
I just bought a 2015 Outback. I am new to the make. Its been 4k miles since i drove it home. I just got a low oil light. I was going to rush to make a service appointment. Now, I am considering doing the oil change myself. I just watched your other video on changing the oil. Thanks. It seems straightforward not complicated. Quick tip: my neighbor would save large boxes or plywood to place under the vehicle to do fluid changes.
Very helpful. Thanks
Below the starter is your crankshaft position sensor change that and see what happens
Motor bearings are bad get new one.
Thank you
its the traction control thing. I have a 2012 avenger, I have no clue about cars but when that light is on it drives like this, usually after taking a turn too sharply or something is when mine turns on and starts acting like this.
Why did you end up selling your boat?
I encountered that same problem with a MINI Cooper and a Craftsman ⅜” spark plug socket as well. I _just_ had to change the plugs on a Hyundai today and remembered, so I cleaned them with brake cleaner and wrapped the socket & extension ends with Gorilla tape to make sure they’d stay on. Worked out.
This defeats the purpose of using the ramps over jack stands
Make sure you chock the front rear wheel since its flipped.
what if you used the wrong length size socket, too short?
Plz do call the cops on them
at 3:08 is where i am having issues. I replaced the plastic clip on the rod and put that in the hole. but the bottom end of the rod is suppose to go beside that other rod shown in 3:08 but mine is super loose. a couple of turns on the door key and it comes off. any help?
Good job.