Thanks David, still going strong 10 years later. She could do with a fresh paint job though
@davidbrennan3613 Жыл бұрын
savage outfit, top man on the harvester
@limi8002 жыл бұрын
It's good to see a video with machinery sounds in it, Most working video's sound like you are at a concert 😀
@davidbrennan36132 жыл бұрын
Serious crop of grass, savage machinery, class video
@upthereds49392 жыл бұрын
Brilliant Video William lovely mix of tractors there 👍🏻
@facecomc34842 жыл бұрын
Good job lad, fine outfit, 150+ an acre here
@WilliamBolger2 жыл бұрын
Thanks. Yes, it's It's a costly game game this year and especially for the long draws I'd say. Hopefully things will settle down before next year.
@JohnDowlingCarlow2 жыл бұрын
Great video William…
@WilliamBolger2 жыл бұрын
Thanks John, hope you're all keeping well
@tomo17472 жыл бұрын
Channel 19 them were the days. Now it's all mobile phones, no are you on there anymore
@mavericknathaniel18842 жыл бұрын
what vehicle is conclusive ?
@Turbine2k82 жыл бұрын
What colour is the hispec red paint, is there a paint code?
@WilliamBolger2 жыл бұрын
I don't know what the RAL code is but if you give them a call they will probably tell you. I ordered and collected a can of it directly from their spares team.
@59plexi2 жыл бұрын
looks good...should of offset the roller bars one slot offset end to end....
@WilliamBolger2 жыл бұрын
Thanks. Some manufacturers do off-set the bars on the crumbler to reduce vibration by enabling more contineous contact with the ground. I looked at several designs out there where bars are not off-set. I didn't bother off-set them as its not necessary where the crumber is small diameter and the bars sink nicely into the soil. No vibration has been experienced whatsover and it's far more cost effective.
@sumonahammedrony96372 жыл бұрын
Great harro
@WilliamBolger2 жыл бұрын
Thank you
@thejattfarmer15682 жыл бұрын
how much acer of land you own
@WilliamBolger2 жыл бұрын
Too much when sowing the crops but not enough when harvesting
@thejattfarmer15682 жыл бұрын
@@WilliamBolger y
@johnmurray54672 жыл бұрын
Hi William, 5 years on, do you still have the machine? Did you modify it in any way? Is 90hp sufficient or could you have went wider? If it broke in the morning and u had to start from scratch, what changes would you make?
@WilliamBolger2 жыл бұрын
Hi John, Yes I still have the harrow, I use it several times a year for sowing barley and reseeding and it never gave any bother. 90hp is enough power for the 3 metres around our area but to go wider would be a struggle. Regardless of power, it couldn't go any wider on the road. To go to a fold up design makes it costly, complicated and high maintenance.
@johnmurray54672 жыл бұрын
@@WilliamBolger thanks very much!
@northsuburbangaragedoormin42323 жыл бұрын
How does it work in clay? Larger rocks? After the rocks flip up I get them with a skid steer
@WilliamBolger3 жыл бұрын
Works lovely in clay, levels it well. It can't pull up the larger rocks very well, the tines spring back and glide over them. I usually leave the front loader and bucket on to gather the stones as I till.
@facecomc34843 жыл бұрын
Good job William, no room for the 390
@WilliamBolger3 жыл бұрын
Thanks. No, I'd be afraid of getting run over if I went near those yokes in the 390
@modelfarmer-bj7ll3 жыл бұрын
Will Jimmy or Steven doyle do anything for you this year
@WilliamBolger3 жыл бұрын
Yep, they're top men. Hope to have a second cut for their Fusion baler
@JohnDowlingCarlow3 жыл бұрын
Great video William. You should definitely do lots more. Your camera does very clear video.
@WilliamBolger3 жыл бұрын
Thanks John, just a simple camera on my phone, no expense spent. I have lots of videos but getting motivated at night to put them together and uploaded is my problem
@fedormania3 жыл бұрын
Fantastic machine! Is it still going strong? lovely to see export version of Fortschritt in blue colour scheme.
@WilliamBolger3 жыл бұрын
Yes, it is still flying through the crops. It was in Classic Tractor magazine the same year that video was taken, their photographer travelled for miles to see it when he heard it was working here. It's owned by Tom Lucas, cuts his own crops and a bit of hire work in the local area every year. They are a fine combine for sure, good to see it's being minded so well
@fedormania3 жыл бұрын
@@WilliamBolger was Rory flying all over from England to take photos? This year I am planning to take few shots of e512 running near Peterborough in England. Young lad has two of them. Also there is exactly same 514 but parked in the shed for few seasons now ( though in working order). This eastern European machines are so underrated.
@WilliamBolger3 жыл бұрын
@@fedormania No the guy who took photos is Irish based, covers the Irish stuff or some of it for Classic Tractor. If you can upload a video of those e512's it would be great, I love watching the older stuff in action. The E514's a very rare, I think there might only be one of those operating in Ireland
@JosephatOOroma3 жыл бұрын
Hello, kindly share the design dimensions
@emai2iky3 жыл бұрын
It's a very nice video! Eye opening to me=) Look forward to your future videos!
@WilliamBolger3 жыл бұрын
Thank you, will try get a few more uploaded soon 👍
@brianmoran53363 жыл бұрын
Hi William would love to make one of those harrows do you sell plans thanks
@WilliamBolger3 жыл бұрын
Hi Brian, thanks for your interest. Drawings /CAD data is not for sale, sorry
@pakistantechnicalali90553 жыл бұрын
What is your country
@pakistantechnicalali90553 жыл бұрын
Send me your WhatsApp number
@pakistantechnicalali90553 жыл бұрын
Contact me please
@pakistantechnicalali90553 жыл бұрын
I need this machine
@mcj-mercedescarjoinery-69433 жыл бұрын
What channel ye on?
@WilliamBolger3 жыл бұрын
Was over 10 years ago but I think iit was 25, guys I worked with at the time tended to stay off the main channel (19) when traveling together to avoid annoying other drivers.
@Panchdeburca3 жыл бұрын
Absolutely brilliant video, well done
@WilliamBolger3 жыл бұрын
Thanks buddy
@kalle88363 жыл бұрын
would u mind telling me the dimesions of the crumbler cut outs?
@WilliamBolger3 жыл бұрын
Anywhere between diameter 300 to 400mm would work fine once you mount it in the suitable position.
@ssteinkirchen26843 жыл бұрын
DDR kennt keine Grenzen ......
@JBAgrivideos3 жыл бұрын
That's one hell of a video. Well done. Liked and subbed. Look forward to seeing more 👍
@WilliamBolger3 жыл бұрын
Thanks a million, just checked out your channel and subscribed also👍👍
@JBAgrivideos3 жыл бұрын
@@WilliamBolger thanks very much 👍
@isake81673 жыл бұрын
Really good video. Only thing id like to see is better quality. :)
@WilliamBolger3 жыл бұрын
Thanks I. Elmberg, we'll work on the quality 😉👍
@facecomc34843 жыл бұрын
Fine job lad
@WilliamBolger3 жыл бұрын
Thanks, looking forward to seeing more of your silage videos too
@facecomc34844 жыл бұрын
Fine looking machine, next project bigger bale trailer
@WilliamBolger4 жыл бұрын
😂😂, yes I need a bigger bale trailer, that one was rebuilt by my father long before I could drive. Next project maybe 🤔🤔
@JohnDowlingCarlow4 жыл бұрын
Great video William!
@WilliamBolger4 жыл бұрын
Thanks John, that was Graham's footage again
@upthereds49394 жыл бұрын
Thats some beaut William 👌🏻👍🏻
@WilliamBolger4 жыл бұрын
I agree, would have loved a spin on it
@JohnDowlingCarlow4 жыл бұрын
It looks good William! I love the red!
@WilliamBolger4 жыл бұрын
Thanks John 👍
@Maxxum-farming4 жыл бұрын
Great job William. You’re handy with the welder. 👌👍
@WilliamBolger4 жыл бұрын
Thanks James 👍
@upthereds49394 жыл бұрын
Mighty job William . 👌🏻👍🏻
@WilliamBolger4 жыл бұрын
Thank you 👍👍
@facecomc34844 жыл бұрын
Good looking outfit, top notch video
@WilliamBolger4 жыл бұрын
Thanks
@JohnDowlingCarlow4 жыл бұрын
Great video! Very professional video production.. Congratulations!
@WilliamBolger4 жыл бұрын
Thanks John
@neptuno3384 жыл бұрын
CB radio is fantastic
@neptuno3383 жыл бұрын
@Christopher Conroy Sorry! I am in Canary Islands. I speak always in the channel 36 FM every days
@neptuno3383 жыл бұрын
@Christopher Conroy yes, you need a good antenna. I have a good station. 73 from Tenerife.
@cmhager014 жыл бұрын
Are you keeping the CAD file private?
@Panchdeburca4 жыл бұрын
Great video. Can’t beat the deutz, beautiful tractor. The 390 looking good on the roller
@williambolger52964 жыл бұрын
Thanks Panchdeburca
@facecomc34844 жыл бұрын
390T looking good
@williambolger52964 жыл бұрын
Thanks faceco Mc
@williamweaver7634 жыл бұрын
Hi william. Awesome job any chance you would share the file ?
@matteocella3794 жыл бұрын
Hi William, what is the material of leveling bar? Thanks.
@williambolger52964 жыл бұрын
5mm plate backed with 100x50 box along top and angle along bottom
Пікірлер
Is this combine for sale by any chance?
Is this machine still working?
Yes, it's well minded
@@WilliamBolger is it for sale by any chance?
Would love to build one of these
the massey is in immaculate condition
Thanks David, still going strong 10 years later. She could do with a fresh paint job though
savage outfit, top man on the harvester
It's good to see a video with machinery sounds in it, Most working video's sound like you are at a concert 😀
Serious crop of grass, savage machinery, class video
Brilliant Video William lovely mix of tractors there 👍🏻
Good job lad, fine outfit, 150+ an acre here
Thanks. Yes, it's It's a costly game game this year and especially for the long draws I'd say. Hopefully things will settle down before next year.
Great video William…
Thanks John, hope you're all keeping well
Channel 19 them were the days. Now it's all mobile phones, no are you on there anymore
what vehicle is conclusive ?
What colour is the hispec red paint, is there a paint code?
I don't know what the RAL code is but if you give them a call they will probably tell you. I ordered and collected a can of it directly from their spares team.
looks good...should of offset the roller bars one slot offset end to end....
Thanks. Some manufacturers do off-set the bars on the crumbler to reduce vibration by enabling more contineous contact with the ground. I looked at several designs out there where bars are not off-set. I didn't bother off-set them as its not necessary where the crumber is small diameter and the bars sink nicely into the soil. No vibration has been experienced whatsover and it's far more cost effective.
Great harro
Thank you
how much acer of land you own
Too much when sowing the crops but not enough when harvesting
@@WilliamBolger y
Hi William, 5 years on, do you still have the machine? Did you modify it in any way? Is 90hp sufficient or could you have went wider? If it broke in the morning and u had to start from scratch, what changes would you make?
Hi John, Yes I still have the harrow, I use it several times a year for sowing barley and reseeding and it never gave any bother. 90hp is enough power for the 3 metres around our area but to go wider would be a struggle. Regardless of power, it couldn't go any wider on the road. To go to a fold up design makes it costly, complicated and high maintenance.
@@WilliamBolger thanks very much!
How does it work in clay? Larger rocks? After the rocks flip up I get them with a skid steer
Works lovely in clay, levels it well. It can't pull up the larger rocks very well, the tines spring back and glide over them. I usually leave the front loader and bucket on to gather the stones as I till.
Good job William, no room for the 390
Thanks. No, I'd be afraid of getting run over if I went near those yokes in the 390
Will Jimmy or Steven doyle do anything for you this year
Yep, they're top men. Hope to have a second cut for their Fusion baler
Great video William. You should definitely do lots more. Your camera does very clear video.
Thanks John, just a simple camera on my phone, no expense spent. I have lots of videos but getting motivated at night to put them together and uploaded is my problem
Fantastic machine! Is it still going strong? lovely to see export version of Fortschritt in blue colour scheme.
Yes, it is still flying through the crops. It was in Classic Tractor magazine the same year that video was taken, their photographer travelled for miles to see it when he heard it was working here. It's owned by Tom Lucas, cuts his own crops and a bit of hire work in the local area every year. They are a fine combine for sure, good to see it's being minded so well
@@WilliamBolger was Rory flying all over from England to take photos? This year I am planning to take few shots of e512 running near Peterborough in England. Young lad has two of them. Also there is exactly same 514 but parked in the shed for few seasons now ( though in working order). This eastern European machines are so underrated.
@@fedormania No the guy who took photos is Irish based, covers the Irish stuff or some of it for Classic Tractor. If you can upload a video of those e512's it would be great, I love watching the older stuff in action. The E514's a very rare, I think there might only be one of those operating in Ireland
Hello, kindly share the design dimensions
It's a very nice video! Eye opening to me=) Look forward to your future videos!
Thank you, will try get a few more uploaded soon 👍
Hi William would love to make one of those harrows do you sell plans thanks
Hi Brian, thanks for your interest. Drawings /CAD data is not for sale, sorry
What is your country
Send me your WhatsApp number
Contact me please
I need this machine
What channel ye on?
Was over 10 years ago but I think iit was 25, guys I worked with at the time tended to stay off the main channel (19) when traveling together to avoid annoying other drivers.
Absolutely brilliant video, well done
Thanks buddy
would u mind telling me the dimesions of the crumbler cut outs?
Anywhere between diameter 300 to 400mm would work fine once you mount it in the suitable position.
DDR kennt keine Grenzen ......
That's one hell of a video. Well done. Liked and subbed. Look forward to seeing more 👍
Thanks a million, just checked out your channel and subscribed also👍👍
@@WilliamBolger thanks very much 👍
Really good video. Only thing id like to see is better quality. :)
Thanks I. Elmberg, we'll work on the quality 😉👍
Fine job lad
Thanks, looking forward to seeing more of your silage videos too
Fine looking machine, next project bigger bale trailer
😂😂, yes I need a bigger bale trailer, that one was rebuilt by my father long before I could drive. Next project maybe 🤔🤔
Great video William!
Thanks John, that was Graham's footage again
Thats some beaut William 👌🏻👍🏻
I agree, would have loved a spin on it
It looks good William! I love the red!
Thanks John 👍
Great job William. You’re handy with the welder. 👌👍
Thanks James 👍
Mighty job William . 👌🏻👍🏻
Thank you 👍👍
Good looking outfit, top notch video
Thanks
Great video! Very professional video production.. Congratulations!
Thanks John
CB radio is fantastic
@Christopher Conroy Sorry! I am in Canary Islands. I speak always in the channel 36 FM every days
@Christopher Conroy yes, you need a good antenna. I have a good station. 73 from Tenerife.
Are you keeping the CAD file private?
Great video. Can’t beat the deutz, beautiful tractor. The 390 looking good on the roller
Thanks Panchdeburca
390T looking good
Thanks faceco Mc
Hi william. Awesome job any chance you would share the file ?
Hi William, what is the material of leveling bar? Thanks.
5mm plate backed with 100x50 box along top and angle along bottom