Hi, I received a Poweshell Prompt >> when copy the command. Any ideas?
@carlo8108Күн бұрын
Do you need to point your router/PC DNS config to the pi hole IP?
@i12bretro23 сағат бұрын
That's the easiest way to get all your devices pointed at it
@carlo810823 сағат бұрын
@@i12bretro yup! Works like gangbusters!
@karamokoouattara7341Күн бұрын
did you install an apache server? because i followed the video from A to Z but when i launch with the ip address i can't access the login interface.
@i12bretroКүн бұрын
It's already installed and configured in the VM. Make sure the network settings are set to bridged
@scenefan2 күн бұрын
It returns an error when I try to log in with an iCloud account
@zkeltonETH2 күн бұрын
Does this method support gpu/hardware acceleration?
@i12bretroКүн бұрын
No
@Rood672 күн бұрын
This was one of the smoothest and simplest Arch installs I’ve ever seen. And I thought my notes for what to do were concise. I’ve been considering ProMox to run Arch and Windows 10 or 11 IoT LTS
@i12bretroКүн бұрын
Definitely recommend Proxmox as a virtualization platform
@DexCode13372 күн бұрын
Why should we download the Non-thread safe PHP verson instead of the Thread-Safe?
@i12bretro2 күн бұрын
It states on the PHP download page the NTS is for IIS, while the TS is for Apache/nginx
@andresrodriguez34602 күн бұрын
Hi man.. What version of the O.S. did you use?
@i12bretro2 күн бұрын
Debian 10
@jhPampoo3 күн бұрын
I want to use windows folder as nextcloud's data folder, what I have to do next sir~
@i12bretro3 күн бұрын
You should be able to access your Windows filesystem from WSL. /mnt/c/ would correspond to c:\
@jhPampoo3 күн бұрын
@@i12bretro Yes i can access windows files from WSL My goal is set windows folder as nextcloud data folder in WSL which requires www-data to be the owner of the folder, but the folder is on windows
@philippebourdais3 күн бұрын
tastic video= As always. Thanks a lot.
@i12bretro2 күн бұрын
Appreciate the comment!
@Roland_Volpahart4 күн бұрын
Greetings . I have tv box Ugoos am6 b plus with s922x processor , i have done everything like you show , except different uboot file and without changing extlinux file - it already has required dtb file . But after rebooting nothing happens , just like if you reboot without any sd card . What do I miss or do wrong ?
@GLaDimCHAZ4 күн бұрын
Oh my gosh I remember watching your video about Sonoma, I can’t believe it’s already been a year.
@i12bretro4 күн бұрын
Time flies when you're grinding at work
@hakandethayor96964 күн бұрын
Hi there Apache isn't starting, kindly assist
@ThePsycoshit4 күн бұрын
Omg... sorry but where do I find the new DNS server? please
@alperbayamКүн бұрын
Did you find the DNS adress?
@ThePsycoshitКүн бұрын
@@alperbayam yes thank you
@christopherdesantis57975 күн бұрын
I installed on VMware Fusion on my mac so I can try before upgrading, the desktop background would not display correctly, so after searching the web I found these two lines that resolved my issue, just in case anyone has the same issue: appleGPU0.present = "TRUE" svga.present = "FALSE"
@ZorgFS5 күн бұрын
checked how it is done on a full scale ESXi setup - no way, I don't need MacOS that much :)
@somegamer79586 күн бұрын
Don't use this. It's outdated. Something changed and anyone that's posted in the past few months can't get it to work. Seek out more recent videos. This should be deleted
@MisterK-YT6 күн бұрын
Will this work with VMWare Workstation (not Player)? Since it’s free now for personal use
@MisterK-YT6 күн бұрын
Will this work with iMessage and Apple ID
@LivMorganGuy6 күн бұрын
This is the best tutorial thank very much
@i12bretro6 күн бұрын
Glad it was helpful. Appreciate the comment!
@LivMorganGuy6 күн бұрын
@@i12bretro hey I accidentally exit out of it when it was installing I can't find the icon in my Linux app tab
@a3-827 күн бұрын
OMG U save my live big respect from the nubie sir
@rogerkrush8 күн бұрын
can be updated? login to apple services is recommended? appstore apps avaliable ?
@DeepakPoojary9 күн бұрын
how many steps bro
@tikkystory9 күн бұрын
how to install gitlab on my raspi4 and already running my web server with nginx port 80 and 443
@i12bretro9 күн бұрын
Supposedly you can add the port to external_url and it will be set (ie yourgitlaburl:1234) You can also update the port manually in the nginx config docs.gitlab.com/omnibus/settings/nginx.html#setting-the-nginx-listen-port
@genshinloyaltea109 күн бұрын
but how to access proxmoxweb ui \
@nocrustracing9 күн бұрын
Excellent thank you, I skipped the steps for pve-root as I don't need more storage there and mine was also type 43, but otherwise this worked perfectly. I did this on a live system, though I did turn off all VMs on the volume except pihole. Many thanks.
@i12bretro9 күн бұрын
Glad to hear it was helpful!
@jaygreentree43949 күн бұрын
What proxmox version are you using because I've tried 3 times on 8.4 and it gets to the part when it should be booting the os and it just boot loops.
@i12bretro9 күн бұрын
Try a different MacOS iso
@kosinski-music10 күн бұрын
Fix for AMD Ryzen5 7500F : In the vmx file, change virtualHW.version = "21" to virtualHW.version = "16" (at least, saw some folks that managed to make it work with version 20 but didn't try myself yet) and make sure usb 3.1 is enabled in hardware settings
@genshinloyaltea1010 күн бұрын
does it work in moc os 15 sequoia
@i12bretro10 күн бұрын
Yeah, it doesn't have anything to do with the guest operating system
@genshinloyaltea1010 күн бұрын
i have rtx 3060 does it work
@i12bretro10 күн бұрын
No, Apple dropped Nvidia support several years ago
@genshinloyaltea109 күн бұрын
@@i12bretro I also have Intel UHD graphics as integrated graphics in cpu
@i12bretro9 күн бұрын
iGPU passthrough is a different beast. I haven't found a reliable and repeatable way to get it working. It seems to be very dependent on the motherboard
@genshinloyaltea109 күн бұрын
@@i12bretro i have msi laptop
@genshinloyaltea1010 күн бұрын
does it harm the host pc?
@i12bretro10 күн бұрын
No
@shawnhaywood419911 күн бұрын
Thanks so much for this walk through!
@i12bretro10 күн бұрын
You're welcome
@ninkusan11 күн бұрын
How to enable wlan?
@mitchwhite185912 күн бұрын
Hi,my surface tracked does not boot from usb ,I followed your instruction’s.
@kvaliantis12 күн бұрын
Very explanatory. Can you do a video about gpu pass through?
@i12bretro11 күн бұрын
kzread.info/dash/bejne/doRsyK-HhdKae7A.html
@fbifido212 күн бұрын
How to do the same thing from within Windows ???
@ajays206012 күн бұрын
Thanks for this video. I will try this on my proxmox server. Do I need a dedicated gpu for this to work? I'm running Proxmox on an Intel nuc.Also, how can I change the serial # of the device once I install the VM so I can sign up to apple id?
@TazzSmk9 күн бұрын
no, gpu acceleration isn't supported (as seen in the video, no transparency in MacOS)
@SethRhodes12 күн бұрын
😂 thanks for this! I now have a doctorate in Yeti History.
@i12bretro11 күн бұрын
Excellent!
@BrutalCoding12 күн бұрын
There's a 404 when visiting that link going to that 0944 tutorial page @i12bretro edit: Seems to be fixed already, yay
@veterantruthtube329813 күн бұрын
so many things that are wrong with this video. 1. to fast 2. to small tec...
@eduardodantas684513 күн бұрын
Congratulations for well succeed installation. When I installed Lakka in my MXQ S805, I had serious problems with the screen in RetroArch. It wasn't possible to read anything. I couldn't solve it, and therefore I gave up to use Lakka.
@PC-Vieira14 күн бұрын
sudo: npm: command not found
@SERINSY14 күн бұрын
Gracias
@draxosan748514 күн бұрын
If you delete my comments again which has the proper instructions for flashing PERC RAID controller, I will report you for providing misinformation. You are wasting people's time.
@i12bretro14 күн бұрын
I don't delete comments, so YT must be flagging them
@draxosan748514 күн бұрын
Why did you delete my comments?
@st484915 күн бұрын
Great video! Can you please point me to a tutorial on setting up 24/7 recording of an RTSP/ONVIF camera (like a Reolink doorbell) after Shinobi installation?
@gantulgatuvdendorj15 күн бұрын
We can even map Graphic cart to this VM, so no need to use VNC console :)
@computer738315 күн бұрын
Not install download apps
@PaulDickson716 күн бұрын
Thank you, very concise and helpful
@lamontewilson172616 күн бұрын
Running a D905 Android Box 9.0. Box is only an s905, (no letter behind it.) The dtb says p281, but for some reason it doesn't boot from anything located in the boot folder.
Пікірлер
Hi, I received a Poweshell Prompt >> when copy the command. Any ideas?
Do you need to point your router/PC DNS config to the pi hole IP?
That's the easiest way to get all your devices pointed at it
@@i12bretro yup! Works like gangbusters!
did you install an apache server? because i followed the video from A to Z but when i launch with the ip address i can't access the login interface.
It's already installed and configured in the VM. Make sure the network settings are set to bridged
It returns an error when I try to log in with an iCloud account
Does this method support gpu/hardware acceleration?
No
This was one of the smoothest and simplest Arch installs I’ve ever seen. And I thought my notes for what to do were concise. I’ve been considering ProMox to run Arch and Windows 10 or 11 IoT LTS
Definitely recommend Proxmox as a virtualization platform
Why should we download the Non-thread safe PHP verson instead of the Thread-Safe?
It states on the PHP download page the NTS is for IIS, while the TS is for Apache/nginx
Hi man.. What version of the O.S. did you use?
Debian 10
I want to use windows folder as nextcloud's data folder, what I have to do next sir~
You should be able to access your Windows filesystem from WSL. /mnt/c/ would correspond to c:\
@@i12bretro Yes i can access windows files from WSL My goal is set windows folder as nextcloud data folder in WSL which requires www-data to be the owner of the folder, but the folder is on windows
tastic video= As always. Thanks a lot.
Appreciate the comment!
Greetings . I have tv box Ugoos am6 b plus with s922x processor , i have done everything like you show , except different uboot file and without changing extlinux file - it already has required dtb file . But after rebooting nothing happens , just like if you reboot without any sd card . What do I miss or do wrong ?
Oh my gosh I remember watching your video about Sonoma, I can’t believe it’s already been a year.
Time flies when you're grinding at work
Hi there Apache isn't starting, kindly assist
Omg... sorry but where do I find the new DNS server? please
Did you find the DNS adress?
@@alperbayam yes thank you
I installed on VMware Fusion on my mac so I can try before upgrading, the desktop background would not display correctly, so after searching the web I found these two lines that resolved my issue, just in case anyone has the same issue: appleGPU0.present = "TRUE" svga.present = "FALSE"
checked how it is done on a full scale ESXi setup - no way, I don't need MacOS that much :)
Don't use this. It's outdated. Something changed and anyone that's posted in the past few months can't get it to work. Seek out more recent videos. This should be deleted
Will this work with VMWare Workstation (not Player)? Since it’s free now for personal use
Will this work with iMessage and Apple ID
This is the best tutorial thank very much
Glad it was helpful. Appreciate the comment!
@@i12bretro hey I accidentally exit out of it when it was installing I can't find the icon in my Linux app tab
OMG U save my live big respect from the nubie sir
can be updated? login to apple services is recommended? appstore apps avaliable ?
how many steps bro
how to install gitlab on my raspi4 and already running my web server with nginx port 80 and 443
Supposedly you can add the port to external_url and it will be set (ie yourgitlaburl:1234) You can also update the port manually in the nginx config docs.gitlab.com/omnibus/settings/nginx.html#setting-the-nginx-listen-port
but how to access proxmoxweb ui \
Excellent thank you, I skipped the steps for pve-root as I don't need more storage there and mine was also type 43, but otherwise this worked perfectly. I did this on a live system, though I did turn off all VMs on the volume except pihole. Many thanks.
Glad to hear it was helpful!
What proxmox version are you using because I've tried 3 times on 8.4 and it gets to the part when it should be booting the os and it just boot loops.
Try a different MacOS iso
Fix for AMD Ryzen5 7500F : In the vmx file, change virtualHW.version = "21" to virtualHW.version = "16" (at least, saw some folks that managed to make it work with version 20 but didn't try myself yet) and make sure usb 3.1 is enabled in hardware settings
does it work in moc os 15 sequoia
Yeah, it doesn't have anything to do with the guest operating system
i have rtx 3060 does it work
No, Apple dropped Nvidia support several years ago
@@i12bretro I also have Intel UHD graphics as integrated graphics in cpu
iGPU passthrough is a different beast. I haven't found a reliable and repeatable way to get it working. It seems to be very dependent on the motherboard
@@i12bretro i have msi laptop
does it harm the host pc?
No
Thanks so much for this walk through!
You're welcome
How to enable wlan?
Hi,my surface tracked does not boot from usb ,I followed your instruction’s.
Very explanatory. Can you do a video about gpu pass through?
kzread.info/dash/bejne/doRsyK-HhdKae7A.html
How to do the same thing from within Windows ???
Thanks for this video. I will try this on my proxmox server. Do I need a dedicated gpu for this to work? I'm running Proxmox on an Intel nuc.Also, how can I change the serial # of the device once I install the VM so I can sign up to apple id?
no, gpu acceleration isn't supported (as seen in the video, no transparency in MacOS)
😂 thanks for this! I now have a doctorate in Yeti History.
Excellent!
There's a 404 when visiting that link going to that 0944 tutorial page @i12bretro edit: Seems to be fixed already, yay
so many things that are wrong with this video. 1. to fast 2. to small tec...
Congratulations for well succeed installation. When I installed Lakka in my MXQ S805, I had serious problems with the screen in RetroArch. It wasn't possible to read anything. I couldn't solve it, and therefore I gave up to use Lakka.
sudo: npm: command not found
Gracias
If you delete my comments again which has the proper instructions for flashing PERC RAID controller, I will report you for providing misinformation. You are wasting people's time.
I don't delete comments, so YT must be flagging them
Why did you delete my comments?
Great video! Can you please point me to a tutorial on setting up 24/7 recording of an RTSP/ONVIF camera (like a Reolink doorbell) after Shinobi installation?
We can even map Graphic cart to this VM, so no need to use VNC console :)
Not install download apps
Thank you, very concise and helpful
Running a D905 Android Box 9.0. Box is only an s905, (no letter behind it.) The dtb says p281, but for some reason it doesn't boot from anything located in the boot folder.