Gdzie znajde numery uszczelki która służy jako szablon do kanału ssacego w głowicy ?
@777hdt4 күн бұрын
Armarol does the same
@YogisGarage4 күн бұрын
Nice work. Question, why is the res so big?
@tr3ynag4ta6 күн бұрын
Has anyone considered possibly fitting an ACTUAL GT3 exhaust for a fair comparison?
@brandonparker838913 күн бұрын
It’s a Honda the motor will take that HP these guys don’t know what there talking about. Get a real tuner in there.
@justinrobert657316 күн бұрын
Was going to do a 1.8T in my cayman, but K always keeps me thinking. I still have a full M96 I could use too.. Keep up the good work.
@michaelabernathy436720 күн бұрын
I'm going to need 2 pulsar 4849g for a 2018 q50. How much?
@SERVITE88824 күн бұрын
Will this work for an automatic 997.1 or 997.2?
@robertfontaine365027 күн бұрын
Very pretty.... Does this spin up any earlier than the GTX35R or PTE6262 w/ Ball Bearings. What does power under the curve look like with this turbo. How well does it perform in second and third gears. i.e. Not just 4th gear 1:1 pulls? Thanks.
@albalushi_movies8828Ай бұрын
What about icv?
@flfreebird808Ай бұрын
Nice video! It looked like you could pick that motor up without too much trouble, yeah? I'm looking to upgrade from a 45 lb 5 HP to a 95 lb 15 HP, but I've been hesitant due to the weight. I have to carry the motor and attach it to my RIB because I transport the RIB on the roof of my SUV.
@Jtheman497Ай бұрын
I bought this pump a few weeks ago, Installed it last week on my supercharged 370z NIsmo. Great mod, Great kit, Ben was great did a few tweaks for me and the install when flawlessly.
@gunterseverings6156Ай бұрын
Hallo. Dankeschön für's Zeigen. Top. Toll. Das beste was gezeigt wurde. 👍💯 Günter Aus Deutschland.👍😄
@IfixxthingsАй бұрын
This is my current boat!!! Very cool stumbling on this. Its still very much alive sporting a 496 now and with modern graphics no one believes its 34 years old.
@AaronFlamingАй бұрын
I cried and had to stop watching when you took that wire wheel to the centers. 🤢🤢🤢🤢
@original2758Ай бұрын
I noticed that when test driving the Fabspeed Exhaust for comparison, you kept the revs just below 5K RPM... What gives?? These flat six engines don't get exciting until about 5200 rpm, in my experience. I have an 02, 3.2 liter 986 Boxster S with Fabspeed Exhaust, headers (no cats) CAI, IPD Plenum, throttle body, etc. and it sounds absolutely vicious... Luv it, might even go with Fabspeeds "spec boxster" Exhaust next.
@edmeyer4800Ай бұрын
Will this work on an automated?
@JessersadlerАй бұрын
Update?
@bwcordesАй бұрын
How has that held up. I've seen similar work on other channels, but they suggest that if you don't back purge, the world comes to an end. That looks really nice, especially for something done at home.
@Le4dfootАй бұрын
I had that combo and it was perfect, but my kids got too big, currently use a 3.8 and a 15hp, I need a 20hp.
@GrandmaKeith2 ай бұрын
Just be careful not to bust a nut
@robertragland60842 ай бұрын
We would love an intercooler for the MDX Type S. Too much focus on Civics and Integras. Most of the industry doesnt have the moxy to fabricate like you do!
@alfacher2 ай бұрын
Hi all! Google it Гонки с Валдайчиком boat bullet 380 hondex 15hp top speed 34,7mph
@adamballweg2 ай бұрын
Love seeing stuff like this!
@sleepyjeff45852 ай бұрын
I have a daihatsu JBDET engine.and i have problem on maintaining good engine temp (the engine runs normal tho).i am gonna use the 5inch automotive fan tho.thanks for sharing..my main aim is to keep the engine bay heat lower for my AC temp.
@30596527582 ай бұрын
I know this is an old video but I was wondering what you did with the purge valve? I’m doing the swap now and just want to double check my work. Trying to make sure no lights come on before I crank her up. Thanks.
@joseacunas21662 ай бұрын
Where can I go and see for buy one?
@R26Roman2 ай бұрын
Two questions please 🙏 1) is this applicable to awd trims? 2) does this kit allow for the honda transmission to be in without fabrication?
@franzenglberger85712 ай бұрын
P R O M O S M
@stevequach26502 ай бұрын
how much 2005 type s 997 exhaust x pipes because i already have after market muffler?
@AshLongie2 ай бұрын
Thats not from scratch was looking forward to the core build
@big__lue56373 ай бұрын
Does the k swap need a turbo? Or can just run one with out it?
@slowfrs3 ай бұрын
$13'948
@luiscruz-no3ib3 ай бұрын
Iy seems to me you're going about this thing the wrong way use instead engine compartment extraction fans from a boats they pull a ton off air and they are very reliable
@stuartarneaud2183 ай бұрын
Sweet great job
@therallycarspotter3 ай бұрын
Please update us on this
@gamingvenom33793 ай бұрын
im with will! we need an update on this.
@nicka023 ай бұрын
How do you tie the boat down in the truck bed? I've tried it your way before but felt the boat was very back heavy with the motor on and was worried it was too much weight.
@johnmann7o23 ай бұрын
Awesome video, will this pass obd2 inspection outside California? Have a kswap car and it passes obd2, no cel.
@jameshinrichs48113 ай бұрын
Installed my bar in my e46 and the fitment was perfect.
@nicholasjustinmiller3 ай бұрын
What's up with the seats you have in there? They look great. Any video overview of it?
@frenchielovescars3 ай бұрын
Would it be possible to mount it next to the battery on the passenger side? Or is there not enough space?
@luciengutierrez4313 ай бұрын
Just blew the engine in my 997.1S. I have an LS motor available but you still think this is the best option? Thx
@grahamrobson92923 ай бұрын
Whatever happened with this story ?
@grahamrobson92923 ай бұрын
That engine was not going to wear well there are particles of metal in the combustion..it looks dirty for a young engine maybe it was never cleaned properly. All the tolerances and bearings need checking.
@J_Suicide_Slum3 ай бұрын
Probably the best video on youtube restoring the bbs rc 090 wheels
@brandonstewart71453 ай бұрын
Dang it I wanted to see how you put the oil pump chain and tensioner on and you skipped it, o well lol!!
@sesaad13 ай бұрын
the small turbo is 2260 bmw?
@brandonisfat67753 ай бұрын
I bought a 2000 323i this video was super helpful and I am glad someone else agrees on how annoying the vacuum lines can be
@JMirxndx3 ай бұрын
How much would it cost for me to pay you to make me a exhaust like that cuz I’m planning on getitng a 996 with this year or coming into 2025
Пікірлер
Gdzie znajde numery uszczelki która służy jako szablon do kanału ssacego w głowicy ?
Armarol does the same
Nice work. Question, why is the res so big?
Has anyone considered possibly fitting an ACTUAL GT3 exhaust for a fair comparison?
It’s a Honda the motor will take that HP these guys don’t know what there talking about. Get a real tuner in there.
Was going to do a 1.8T in my cayman, but K always keeps me thinking. I still have a full M96 I could use too.. Keep up the good work.
I'm going to need 2 pulsar 4849g for a 2018 q50. How much?
Will this work for an automatic 997.1 or 997.2?
Very pretty.... Does this spin up any earlier than the GTX35R or PTE6262 w/ Ball Bearings. What does power under the curve look like with this turbo. How well does it perform in second and third gears. i.e. Not just 4th gear 1:1 pulls? Thanks.
What about icv?
Nice video! It looked like you could pick that motor up without too much trouble, yeah? I'm looking to upgrade from a 45 lb 5 HP to a 95 lb 15 HP, but I've been hesitant due to the weight. I have to carry the motor and attach it to my RIB because I transport the RIB on the roof of my SUV.
I bought this pump a few weeks ago, Installed it last week on my supercharged 370z NIsmo. Great mod, Great kit, Ben was great did a few tweaks for me and the install when flawlessly.
Hallo. Dankeschön für's Zeigen. Top. Toll. Das beste was gezeigt wurde. 👍💯 Günter Aus Deutschland.👍😄
This is my current boat!!! Very cool stumbling on this. Its still very much alive sporting a 496 now and with modern graphics no one believes its 34 years old.
I cried and had to stop watching when you took that wire wheel to the centers. 🤢🤢🤢🤢
I noticed that when test driving the Fabspeed Exhaust for comparison, you kept the revs just below 5K RPM... What gives?? These flat six engines don't get exciting until about 5200 rpm, in my experience. I have an 02, 3.2 liter 986 Boxster S with Fabspeed Exhaust, headers (no cats) CAI, IPD Plenum, throttle body, etc. and it sounds absolutely vicious... Luv it, might even go with Fabspeeds "spec boxster" Exhaust next.
Will this work on an automated?
Update?
How has that held up. I've seen similar work on other channels, but they suggest that if you don't back purge, the world comes to an end. That looks really nice, especially for something done at home.
I had that combo and it was perfect, but my kids got too big, currently use a 3.8 and a 15hp, I need a 20hp.
Just be careful not to bust a nut
We would love an intercooler for the MDX Type S. Too much focus on Civics and Integras. Most of the industry doesnt have the moxy to fabricate like you do!
Hi all! Google it Гонки с Валдайчиком boat bullet 380 hondex 15hp top speed 34,7mph
Love seeing stuff like this!
I have a daihatsu JBDET engine.and i have problem on maintaining good engine temp (the engine runs normal tho).i am gonna use the 5inch automotive fan tho.thanks for sharing..my main aim is to keep the engine bay heat lower for my AC temp.
I know this is an old video but I was wondering what you did with the purge valve? I’m doing the swap now and just want to double check my work. Trying to make sure no lights come on before I crank her up. Thanks.
Where can I go and see for buy one?
Two questions please 🙏 1) is this applicable to awd trims? 2) does this kit allow for the honda transmission to be in without fabrication?
P R O M O S M
how much 2005 type s 997 exhaust x pipes because i already have after market muffler?
Thats not from scratch was looking forward to the core build
Does the k swap need a turbo? Or can just run one with out it?
$13'948
Iy seems to me you're going about this thing the wrong way use instead engine compartment extraction fans from a boats they pull a ton off air and they are very reliable
Sweet great job
Please update us on this
im with will! we need an update on this.
How do you tie the boat down in the truck bed? I've tried it your way before but felt the boat was very back heavy with the motor on and was worried it was too much weight.
Awesome video, will this pass obd2 inspection outside California? Have a kswap car and it passes obd2, no cel.
Installed my bar in my e46 and the fitment was perfect.
What's up with the seats you have in there? They look great. Any video overview of it?
Would it be possible to mount it next to the battery on the passenger side? Or is there not enough space?
Just blew the engine in my 997.1S. I have an LS motor available but you still think this is the best option? Thx
Whatever happened with this story ?
That engine was not going to wear well there are particles of metal in the combustion..it looks dirty for a young engine maybe it was never cleaned properly. All the tolerances and bearings need checking.
Probably the best video on youtube restoring the bbs rc 090 wheels
Dang it I wanted to see how you put the oil pump chain and tensioner on and you skipped it, o well lol!!
the small turbo is 2260 bmw?
I bought a 2000 323i this video was super helpful and I am glad someone else agrees on how annoying the vacuum lines can be
How much would it cost for me to pay you to make me a exhaust like that cuz I’m planning on getitng a 996 with this year or coming into 2025