Created this channel to upload videos about what I enjoy doing. Will be introducing a new cars, bikes, mods I do. I’m active with every subscriber and look forward to providing some entertaining content for you guys.
You looking for everything I’ve installed into it as far as the motor goes or just the basics? Like F1A94, long tube headers catless, MBRP race catback, custom cam. RPM meth kit forged internals?
@Spuhyuh12 күн бұрын
@@MP3BOOSTED Yes everything, if you don’t mind
@MP3BOOSTED11 күн бұрын
Here is what I got minus the pulley part, had to swap back to bigger pulley until I swap over to a Holley system. DSX Flex Fuel Kit, DSX AUX fuel pump, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance custom boost cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Pushrods and Johnson 2110R lifters, TSP CNC'd Heads, Ported MSD intake manifold, KATECH 103mm Throttle body, RPM custom Meth kit, F1A-94 procharger, Red race blow off valve, stage II intercooler, Cp-Carillo Forged Rods and Pistons, LT1-S Monster Triple Disc clutch, Hurt Short Throw Shifter, ibanks super dash gauge, AEM AFR gauge, Valve Cover breather with check valve, procharger mesh guard, procharger current pulley (.3.90), swap to 3.70 pulley.
@jerrysilvhammar758521 күн бұрын
Holy shit you cant drive
@MP3BOOSTED21 күн бұрын
lol to funny
@fwd_mason26 күн бұрын
What kinda radar is that? Been seeing it a lot recently I want one lol.
@MP3BOOSTED26 күн бұрын
Valentine one, it’s now much quieter after tuning it, I also have the new model in my truck now, even nicer
@jershomceral859127 күн бұрын
Hello what is the ET for this wheels is it +32 or the +40?
@ccg1171Ай бұрын
Wooooow 🙄🫤💩
@Audi4Rings808Ай бұрын
Jesus Christ get the proper tools and this would be so much easier. Thjs is painful to watch. 😂 backyard mechanics. And one guy is doing all the work
@MP3BOOSTEDАй бұрын
lol someone mad that I can do more then them without needing what you need. To funny, keep watching, maybe one day you’ll learn how to use these “hard tools” 💪
@Audi4Rings808Ай бұрын
@@MP3BOOSTED I'm a bmw technician. Your arrogance is hilarious 😆. How about you help the guy instead of just holding a phone. My 19 year old apprentice is more help.
@MP3BOOSTEDАй бұрын
lol you can be whatever you think you are but your still watching a How-To video and mad that I can do it with less then you got lol to funny. One day you’ll be able to, just put your mind to let, let me know how else I can help you
@Audi4Rings808Ай бұрын
@@MP3BOOSTED be whatever I think I am? That doesn't even make sense 😂. And what am I mad at? Your lack of investment in tools and making someone else do that work. I was mad at the fact you're holding a phone and useless to the work being done lmao 🤣. And the fact the video starts with half the shit out the car 😭😭😭 he asked what size is it and you said "idk" b!tch figure it out lazy. Fact that you're a Texan and Hispanic and making your pops or whoever is is do the labor is what's insane. Flex being incompetent that's weird. Just expected more. Texas mfs are usually real dope car guys.
@MP3BOOSTEDАй бұрын
Yeah I ain’t reading no paragraph of you trying to convince me otherwise lol. Someone’s triggered at the facts 🫣🤭
@jimmygmc6917Ай бұрын
whats wrong with camaros nowdays rather than 1992 and older pulling the engine older camaros piece a cake. newer crap is a JOKE!
@MP3BOOSTEDАй бұрын
lol right
@mYLzT1Ай бұрын
love that chop, such a nice cam
@MP3BOOSTEDАй бұрын
Yeah I kinda miss it.
@MP3BOOSTEDАй бұрын
Wait wrong video. In this one the car was not tuned properly. You should hear the others.
@victoryhunter0175Ай бұрын
What’s the exhaust system
@MP3BOOSTEDАй бұрын
This video was stock
@zwz882Ай бұрын
Fantastic sound 😮
@WildEngineeringАй бұрын
Im in the process of doing this right now, does the transmission fluid really need to be drained to disconnect the transmission?
@MP3BOOSTEDАй бұрын
No, I did it to flush everything out and have new fluid in everything
@baderalfaris26322 ай бұрын
What spacers size did u use for the rear wheels?
@MP3BOOSTED2 ай бұрын
None needed.
@josemahabirsingh54202 ай бұрын
I'll be doing this to mine. Now.
@alexcism24772 ай бұрын
Aye man, are the tire specs 17x11 on a 305 tire ?
@MP3BOOSTED2 ай бұрын
345 45 17 for tire yes. Rim I believe is 17x10
@ProvidedMinkFilms2 ай бұрын
Nice video but I thought I was crazy cause the mic audio is only my left ear 😅 but good quality video brother!
@BoxingLegends2024Ай бұрын
that means it was recorded in mono instead of stereo
@ProvidedMinkFilmsАй бұрын
@@BoxingLegends2024 I know. I was just saying that when I was watching it I thought I was going crazy cause the audio was only on one side of my earbuds. But thanks for stating that anyways
@6thgenevozach4812 ай бұрын
Not hating but that's how my cars are when I hit boost better to ease in rather then let off
@MP3BOOSTED2 ай бұрын
No traction. On my radials it’s controllable.
@6thgenevozach4812 ай бұрын
Weak lolgot to give it more throttle to get it going straight
@MP3BOOSTED2 ай бұрын
Let me know when you make some power and then we’ll talk 💪
@kelvinward8012 ай бұрын
he scared of it!!!!!!
@MP3BOOSTED2 ай бұрын
🤨 scared and respect are two different things.
@mingo72942 ай бұрын
Nice what size lift do you have on there?
@MP3BOOSTED2 ай бұрын
Zone 6.5
@andrewpittman97082 ай бұрын
Is this without the resonator
@MP3BOOSTED2 ай бұрын
Has the resonator still
@SS_FOR_THE_WIN2 ай бұрын
Will 305 45 17 fit on a 2019 2ss
@MP3BOOSTED2 ай бұрын
It will fit any 6th gen Camaro.
@chrisholland20163 ай бұрын
Thats a badass truck right there thats definitely the way I like chevy silverados lifted and aggressive looking just like that. 🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻🖤🖤🖤🖤🖤🔥🔥🔥🔥🔥
@joshwhite99833 ай бұрын
I am doing almost the same build right now to mine. Did you reuse the factory oil pump and timing chain? Have you had any issues with them? If you did it again would you upgrade them oil pump and timing chain?
@MP3BOOSTED3 ай бұрын
I upgraded my timing chain, didn’t keep the stock. Oil pump wise I’m running stock still and yeah if I could go back I would have just opened it. I bought some 3D printed mounting things to keep the oil pump in the same spot so I could “avoid” any issues but so far so good. I don’t drive my car like I use to but I’ll be racing in shift sector here next month so time to turn it up
@joshwhite99833 ай бұрын
@@MP3BOOSTED I bought those oil pump alignment pieces too after watching your videos, pretty good idea.
@MP3BOOSTED3 ай бұрын
Yeah they fell apart once I unscrewed them but they did the job. Let me know if you get stuck on anything. Ahhh one thing I messed up on to was putting the ground over the bmr motor mount vs straight to the block. Gave me a bad negative until just recently I scraped off the red paint to the mounts for a better ground lol. Dumb mistake.
@D3dougefreshD33 ай бұрын
Big money 😮💨😮💨
@MP3BOOSTED3 ай бұрын
👀
@Iamkitkatbar4 ай бұрын
cant see out that mf
@MP3BOOSTED4 ай бұрын
Camera is on my head. So makes it look a ton smaller
@joshwhite99834 ай бұрын
What were you drilling here? 4:06
@MP3BOOSTED4 ай бұрын
lol stripped bolt to the cam locking plate
@TurnMaster4 ай бұрын
Pointless having a super fast car these days !! Just have something cool and different. Stopped riding supersport motorbikes because you can't truly enjoy the time warp you have at your fingertips, can lose your licence in first gear !!
@CameronLegend4 ай бұрын
Sexy asf😊
@kingjon71244 ай бұрын
Did u drain ac system also did u have to lower cradle to get transmission out
@MP3BOOSTED4 ай бұрын
Yes and yes
@Passkill4 ай бұрын
Who tuned you?
@MP3BOOSTED4 ай бұрын
Jeremycapps
@mirzasaj4 ай бұрын
I recommend you mark position before removing so its aligned to factory when you need to put back
@krasnaludek2985 ай бұрын
Great color on that truck; probably my favorite. The only downside of these HDs is that they need 37s or even 40s to make them look proportionate. The majority of HDs I see on the road have those baby tires (usually 33s) & it looks horrible.
@MP3BOOSTED5 ай бұрын
Yeah I’m going with 37s, stock they have a “34” inch tire
@poopinator225 ай бұрын
....and yet you still get gapped by Mustangs. Back into the graveyard crapmaro! Hopefully forever
@MP3BOOSTED5 ай бұрын
lol, appreciate the love, let me know when you get a car and can put those words into action 👌
@poopinator225 ай бұрын
@@MP3BOOSTED My 04 cobra will wipe the floor with you kid
@MP3BOOSTED5 ай бұрын
Yeah ok. I’ll wait for the proof
@whisperingeye_smell-it16235 ай бұрын
I wish these cars looked better. They have got to be the ugliest cars I’ve ever seen. Fucking cheap af ls3 though
@MP3BOOSTED5 ай бұрын
lol if only it had an LS3 😂
@anaccount7923Ай бұрын
How in the fuck is a 6th gen ugly??? 😂
@6thGen65 ай бұрын
I’ll race both, Dig and Roll 🗿
@MP3BOOSTED5 ай бұрын
lol set it up let’s go
@jaybird8295 ай бұрын
Which cam?
@MP3BOOSTED5 ай бұрын
TSP VVT3
@buttabean235 ай бұрын
We’ve missed the uploads man! Glad to have you back!
@MP3BOOSTED5 ай бұрын
Yeah it’s been a minute, I still got the Camaro just been working a lot and honestly don’t drive the car anymore like I wanted, almost done with the road cage just have to get the harness in and put in my seats and I’m good to go.
@buttabean235 ай бұрын
@@MP3BOOSTED man I gotta ask, was it worth boosting it? Surprisingly I’m pretty much your same build before you was boosted and it’s fun but damn I’d love to make 800+ eventually.
@MP3BOOSTED5 ай бұрын
It depends honestly, since it’s not my daily and I don’t plan or need to take it on super long road trips then yes worth it, totally different feel but if it is your daily then no, you run into problem after problem and i put e85, 93 and meth, with that on a full tank it’s almost a 200 mile range. Reason why I’m doing a roll cage and parachute. I’m also putting a smaller pulley on to go from 12lbs to 20 to add some more power for those runs. I love the car and everything I’ve done, I just wish I bought two so I can daily one lol.
@krasnaludek2985 ай бұрын
We’ve ??? You speak [write for your self] & nobody else. There is no “WE” in this context.
@MP3BOOSTED5 ай бұрын
lol that’s cute ^
@414pyro75 ай бұрын
Where did you go to get the tires mounted and balanced?
@MP3BOOSTED5 ай бұрын
Discount tire in San Antonio
@Justinx310x5 ай бұрын
I’m hoping there’s a Camaro sitting in that garage
@MP3BOOSTED5 ай бұрын
lol that thing is NOT going anywhere, in fact I’m registering to race it at the ucpoming shift sector in hondo TX.
@rosy46255 ай бұрын
So 🆒
@MP3BOOSTED5 ай бұрын
Thanks for the $4.99!!! Goes to supporting my mod addiction.
@CameronLegend5 ай бұрын
Sounds so insane 😩 I wish I could afford one…
@MP3BOOSTED5 ай бұрын
Lies, at least you can tune yours 😔
@CameronLegend5 ай бұрын
@@MP3BOOSTED you’re right. My next mod is probably going to be the gooseneck hitch to be honest.
@JesusMartinez-wm4dk5 ай бұрын
How much pay moth
@CameronLegend5 ай бұрын
@@JesusMartinez-wm4dk uh about $1300. I put barely anything down
@MP3BOOSTED5 ай бұрын
I pay $0 😇
@samcase70455 ай бұрын
800hp?
@MP3BOOSTED5 ай бұрын
Yup 👀
@samcase70455 ай бұрын
Better get a drag pack buddy…..hate for you to smash that beast!
@MP3BOOSTED5 ай бұрын
Yeah I got one, on my next/last video. Been lazy and busy lately but I did a ton more as far as roll cage chute and all
Пікірлер
Holy fuck bro this is nice
Thanks 🙏
What is the mod list? (Pls respond)
You looking for everything I’ve installed into it as far as the motor goes or just the basics? Like F1A94, long tube headers catless, MBRP race catback, custom cam. RPM meth kit forged internals?
@@MP3BOOSTED Yes everything, if you don’t mind
Here is what I got minus the pulley part, had to swap back to bigger pulley until I swap over to a Holley system. DSX Flex Fuel Kit, DSX AUX fuel pump, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance custom boost cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Pushrods and Johnson 2110R lifters, TSP CNC'd Heads, Ported MSD intake manifold, KATECH 103mm Throttle body, RPM custom Meth kit, F1A-94 procharger, Red race blow off valve, stage II intercooler, Cp-Carillo Forged Rods and Pistons, LT1-S Monster Triple Disc clutch, Hurt Short Throw Shifter, ibanks super dash gauge, AEM AFR gauge, Valve Cover breather with check valve, procharger mesh guard, procharger current pulley (.3.90), swap to 3.70 pulley.
Holy shit you cant drive
lol to funny
What kinda radar is that? Been seeing it a lot recently I want one lol.
Valentine one, it’s now much quieter after tuning it, I also have the new model in my truck now, even nicer
Hello what is the ET for this wheels is it +32 or the +40?
Wooooow 🙄🫤💩
Jesus Christ get the proper tools and this would be so much easier. Thjs is painful to watch. 😂 backyard mechanics. And one guy is doing all the work
lol someone mad that I can do more then them without needing what you need. To funny, keep watching, maybe one day you’ll learn how to use these “hard tools” 💪
@@MP3BOOSTED I'm a bmw technician. Your arrogance is hilarious 😆. How about you help the guy instead of just holding a phone. My 19 year old apprentice is more help.
lol you can be whatever you think you are but your still watching a How-To video and mad that I can do it with less then you got lol to funny. One day you’ll be able to, just put your mind to let, let me know how else I can help you
@@MP3BOOSTED be whatever I think I am? That doesn't even make sense 😂. And what am I mad at? Your lack of investment in tools and making someone else do that work. I was mad at the fact you're holding a phone and useless to the work being done lmao 🤣. And the fact the video starts with half the shit out the car 😭😭😭 he asked what size is it and you said "idk" b!tch figure it out lazy. Fact that you're a Texan and Hispanic and making your pops or whoever is is do the labor is what's insane. Flex being incompetent that's weird. Just expected more. Texas mfs are usually real dope car guys.
Yeah I ain’t reading no paragraph of you trying to convince me otherwise lol. Someone’s triggered at the facts 🫣🤭
whats wrong with camaros nowdays rather than 1992 and older pulling the engine older camaros piece a cake. newer crap is a JOKE!
lol right
love that chop, such a nice cam
Yeah I kinda miss it.
Wait wrong video. In this one the car was not tuned properly. You should hear the others.
What’s the exhaust system
This video was stock
Fantastic sound 😮
Im in the process of doing this right now, does the transmission fluid really need to be drained to disconnect the transmission?
No, I did it to flush everything out and have new fluid in everything
What spacers size did u use for the rear wheels?
None needed.
I'll be doing this to mine. Now.
Aye man, are the tire specs 17x11 on a 305 tire ?
345 45 17 for tire yes. Rim I believe is 17x10
Nice video but I thought I was crazy cause the mic audio is only my left ear 😅 but good quality video brother!
that means it was recorded in mono instead of stereo
@@BoxingLegends2024 I know. I was just saying that when I was watching it I thought I was going crazy cause the audio was only on one side of my earbuds. But thanks for stating that anyways
Not hating but that's how my cars are when I hit boost better to ease in rather then let off
No traction. On my radials it’s controllable.
Weak lolgot to give it more throttle to get it going straight
Let me know when you make some power and then we’ll talk 💪
he scared of it!!!!!!
🤨 scared and respect are two different things.
Nice what size lift do you have on there?
Zone 6.5
Is this without the resonator
Has the resonator still
Will 305 45 17 fit on a 2019 2ss
It will fit any 6th gen Camaro.
Thats a badass truck right there thats definitely the way I like chevy silverados lifted and aggressive looking just like that. 🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻🖤🖤🖤🖤🖤🔥🔥🔥🔥🔥
I am doing almost the same build right now to mine. Did you reuse the factory oil pump and timing chain? Have you had any issues with them? If you did it again would you upgrade them oil pump and timing chain?
I upgraded my timing chain, didn’t keep the stock. Oil pump wise I’m running stock still and yeah if I could go back I would have just opened it. I bought some 3D printed mounting things to keep the oil pump in the same spot so I could “avoid” any issues but so far so good. I don’t drive my car like I use to but I’ll be racing in shift sector here next month so time to turn it up
@@MP3BOOSTED I bought those oil pump alignment pieces too after watching your videos, pretty good idea.
Yeah they fell apart once I unscrewed them but they did the job. Let me know if you get stuck on anything. Ahhh one thing I messed up on to was putting the ground over the bmr motor mount vs straight to the block. Gave me a bad negative until just recently I scraped off the red paint to the mounts for a better ground lol. Dumb mistake.
Big money 😮💨😮💨
👀
cant see out that mf
Camera is on my head. So makes it look a ton smaller
What were you drilling here? 4:06
lol stripped bolt to the cam locking plate
Pointless having a super fast car these days !! Just have something cool and different. Stopped riding supersport motorbikes because you can't truly enjoy the time warp you have at your fingertips, can lose your licence in first gear !!
Sexy asf😊
Did u drain ac system also did u have to lower cradle to get transmission out
Yes and yes
Who tuned you?
Jeremycapps
I recommend you mark position before removing so its aligned to factory when you need to put back
Great color on that truck; probably my favorite. The only downside of these HDs is that they need 37s or even 40s to make them look proportionate. The majority of HDs I see on the road have those baby tires (usually 33s) & it looks horrible.
Yeah I’m going with 37s, stock they have a “34” inch tire
....and yet you still get gapped by Mustangs. Back into the graveyard crapmaro! Hopefully forever
lol, appreciate the love, let me know when you get a car and can put those words into action 👌
@@MP3BOOSTED My 04 cobra will wipe the floor with you kid
Yeah ok. I’ll wait for the proof
I wish these cars looked better. They have got to be the ugliest cars I’ve ever seen. Fucking cheap af ls3 though
lol if only it had an LS3 😂
How in the fuck is a 6th gen ugly??? 😂
I’ll race both, Dig and Roll 🗿
lol set it up let’s go
Which cam?
TSP VVT3
We’ve missed the uploads man! Glad to have you back!
Yeah it’s been a minute, I still got the Camaro just been working a lot and honestly don’t drive the car anymore like I wanted, almost done with the road cage just have to get the harness in and put in my seats and I’m good to go.
@@MP3BOOSTED man I gotta ask, was it worth boosting it? Surprisingly I’m pretty much your same build before you was boosted and it’s fun but damn I’d love to make 800+ eventually.
It depends honestly, since it’s not my daily and I don’t plan or need to take it on super long road trips then yes worth it, totally different feel but if it is your daily then no, you run into problem after problem and i put e85, 93 and meth, with that on a full tank it’s almost a 200 mile range. Reason why I’m doing a roll cage and parachute. I’m also putting a smaller pulley on to go from 12lbs to 20 to add some more power for those runs. I love the car and everything I’ve done, I just wish I bought two so I can daily one lol.
We’ve ??? You speak [write for your self] & nobody else. There is no “WE” in this context.
lol that’s cute ^
Where did you go to get the tires mounted and balanced?
Discount tire in San Antonio
I’m hoping there’s a Camaro sitting in that garage
lol that thing is NOT going anywhere, in fact I’m registering to race it at the ucpoming shift sector in hondo TX.
So 🆒
Thanks for the $4.99!!! Goes to supporting my mod addiction.
Sounds so insane 😩 I wish I could afford one…
Lies, at least you can tune yours 😔
@@MP3BOOSTED you’re right. My next mod is probably going to be the gooseneck hitch to be honest.
How much pay moth
@@JesusMartinez-wm4dk uh about $1300. I put barely anything down
I pay $0 😇
800hp?
Yup 👀
Better get a drag pack buddy…..hate for you to smash that beast!
Yeah I got one, on my next/last video. Been lazy and busy lately but I did a ton more as far as roll cage chute and all