Пікірлер

• 
  @Bigtdasmoka9 күн бұрын

  Where is bank 2 sensor 1 located I got a code pending on my obd2 it’s P0152 high voltage any suggestion or will pending code go away mine is a 2003 ?

• 
  @paulmcneely2919Ай бұрын

  Great video but i sure wish you would have put on the video how you got to the package tray and how.to.remove it. Itook out the head resr and the.back seat couldn't get to the motor from there

• 
  @americanpatriot5836Ай бұрын

  Great video

• 
  @DavidAud-vg9fs3 ай бұрын

  Where can I purchase a screen duplicator

• 
  @zacharytribou27283 ай бұрын

  I've always wondered why the vr4 had boosters for the clutch, the sl clutch is already very long which means less effort to press down, almost 2022 Honda like, is the clutch for the vr4 really that much heavier

• 
  @anthonyperez56663 ай бұрын

  Did you replace the vacuum clutch booster

• 
  @IlianNachev4 ай бұрын

  My wing still won’t move, even after lubrication. I hear the motor, but the wing won’t go up.

• 
  @Jack144325 ай бұрын

  Did you cut the carpet to get into it or there is space to reach the sensor?

• 
  @617michel5 ай бұрын

  Okay… haven’t experienced any issues until I reassembled a/c controller for GTA kit (apple CarPlay). Top went down but won’t go back up. The top switch just flashes red. Any thoughts?

• 
  @user-ij1ex7fi5p7 ай бұрын

  What screen duplicator are you using?

• 
  @atxjax18 ай бұрын

  easier to just cut the old sensor off the harness and use solder sleeves to splice the new one in.

• 
  @rustytuney725 күн бұрын

  I feel solder sleeves add too much possibility of false readings on such a sensitive part. (o2) Easier? Not really, a lot of risk, you might be buying another sensor unless your splice is perfect.

• 
  @jameschar24 Жыл бұрын

  As an owner of an SC430, the design of this vehicle was horrible. Nothing easy about repairs with this one!

• 
  @melloyello2089 Жыл бұрын

  Hey I'm getting a b2518 code for the package tray motor circuit open is that mean my motor is going bad

• 
  @richwalker8825 Жыл бұрын

  How do you remove the package tray pls

• 
  @gio4nyc-ks1ox Жыл бұрын

  How do you remove the package tray?

• 
  @VegasElement Жыл бұрын

  Are you offering your services to folks with the same problem?

• 
  @kehindeoye569 Жыл бұрын

  I would like to express my heartfelt gratitude for your dedication to the SC community. Recently, I had been struggling with my SC convertible top, and I was at my wit's end trying to troubleshoot the problem. But Byron came to my rescue like a true superhero! In a mere 10 seconds, he was able to identify the root cause of the issue that had eluded me for days. Byron assistance was invaluable, and I am deeply appreciative of your help. I would highly recommend your channel to anyone who hasn't subscribed yet. Your expert insights and practical advice can potentially save thousands of dollars in repair costs. Your humility and approachability make you an outstanding member of the SC community.

• 
  @byronhatch7237 Жыл бұрын

  I had so much fun watching how happy and excited you were when the top went down! Looking forward to meeting you soon!

• 
  @youngmanmarcus7 ай бұрын

  Hey Byron I happen to live in Texas myself, and I was hoping to receive some help with my convertible top as well

• 
  @2008israelramos Жыл бұрын

  I'm dealing with my convertible top not opening now also on my 2004 sc430, but I doubt I could ever fix it like this. Are you a mechanic or engineer?

• 
  @JK-rm7uy Жыл бұрын

  Thanks a lot for sharing this video! It saved me a lot of time. Best regards from Germany.

• 
  @JHPhotographyHouston Жыл бұрын

  Thanks for making and posting the video. 🙌 🙌

• 
  @kehindeoye569 Жыл бұрын

  I have the same car, the wings on the back seat is not deploying so that the top will go into the truck without issue. Could the motor be the issue?

• 
  @sophiadymnicki2405 Жыл бұрын

  Dont waist your time whith after market 02 sensors ! Use only denso oem. Or u will do the job 2 times ! Been there 😀

• 
  @lhlinn7351 Жыл бұрын

  Very nice job. Thanks for posting. I'm sure it will be of assistance to others. With the cost of dealership repairs, we all need to help one another.

• 
  @Tolljuh1st Жыл бұрын

  Great Video my 2002 lexus sc430 roof will not close and the button just blinks when pressed. What should I do??

• 
  @benjaminbaird3798 Жыл бұрын

  This is so wrong I jus did mine without removing the brake booster it was a bitch to do but I was able to do it

• 
  @DevonBoutilier Жыл бұрын

  Hey, did you get the tensioner from a shop? I’m looking for one but can’t find any locally

• 
  @BrooklynBounce2 жыл бұрын

  That sux that the prior owner lied about the mileage. That’s some grimy shit

• 
  @kevingraham7852 жыл бұрын

  Excellent video 📹 I have a Infiniti G37. When I had the same problem with the top not opening all the way. Infiniti charged me $3,300 to repair it. 🤯

• 
  @jameschar24 Жыл бұрын

  Lexus wanted to charge me the same to repair my SC430. I now have a SC430 coupe with 225K miles on it! It is not my main vehicle anymore but it still runs. Just wish the top would go down.

• 
  @327JohnnySS2 жыл бұрын

  The gas station tanks that are under ground are prone to water seepage. Have you ever cut open a fuel filter after a vehicle has been setting a lean code and shops will unleash the parts cannons? When in actuality it's a plugged up fuel filter.

• 
  @327JohnnySS2 жыл бұрын

  What is the purpose for this?

• 
  @NateSpring Жыл бұрын

  Reduce lift at speed.

• 
  @327JohnnySS2 жыл бұрын

  Pretty cool, thanks for sharing. Check out Andrew Camarrata as he built a castle on a mountain side out of shipping containers with a shop. Thanks for sharing bro. 👍

• 
  @dydxeq02 жыл бұрын

  I'm about to put my wings back together after replacing the micro switch. Glad I stumbled on this video. Thanks!

• 
  @elibutton2 жыл бұрын

  damn you're mechanically inclined. unlike me.

• 
  @forrestallbert89912 жыл бұрын

  94 front bumper?

• 
  @ikeizzle18782 жыл бұрын

  Meh....No way of getting around taking off the intake I see😂

• 
  @byronhatch72372 жыл бұрын

  Truth

• 
  @TheChadPGH2 жыл бұрын

  We're you able to pull off the replacement? I have to replace mine and trying to avoid ripping out half the interior!

• 
  @vickoramdat81343 жыл бұрын

  Byron, I feel your pain when you switched that sensor out. I have an O2 SC430, I lifted the top Mats carpet, took a new blade sliced about 5in length and again sliced into the thicker padding and took the sensor out. Just a suggestion next time. the 1 cut in the carpet can't be seen. Cheers

• 
  @chefron83 жыл бұрын

  Crowsfoot wrenches.

• 
  @327JohnnySS3 жыл бұрын

  If it has tits or wheels you will always have problems. C'est la vie. Its good to be alive, busted knuckles and such.

• 
  @najisaeed8993 жыл бұрын

  Good job man

• 
  @raynmusic60113 жыл бұрын

  I had the same problem and I connected it to the battery to test it like that and it worked. But when i put it back on the car it didnt move , by fix what did u do to fix it ?

• 
  @gregswoboda55353 жыл бұрын

  are you saying that motor controls the whole top operation??

• 
  @byronhatch72373 жыл бұрын

  A portion of the operation, yes. The entire process takes a computer and multiple motors and switches working in harmony....

• 
  @Yp-ty6mr3 жыл бұрын

  Thank you for this video. My sc430 2002 back dash board gets frozen and doesn’t move.rest of the roof moves as it should. So I follow procedure in the car operating manual. Open the roof till it’s horizontle. Then back dash is suppose to move up,it doesn’t ,so I manually with one hand( to avoid lots of pressure) lift up the black dash board and then push it down again. Then close the roof from semi open position. Then open the roof with the switch. This unfreezes motor for dashboard and now it starts working as it’s suppose to. Usually I have to do it couple of times a year at most. Of course , long term proper solution is to service the motor as shown here.

• 
  @anbazmi3 жыл бұрын

  Thanks for the tip!

• 
  @anbazmi3 жыл бұрын

  This will come in handy when i get around to doing mine

• 
  @yugiraja37953 жыл бұрын

  What city or state are you located at?

• 
  @k0rc3 жыл бұрын

  At 1:24 he says "Right here in Houston (TX)"

• 
  @327JohnnySS3 жыл бұрын

  Hopefully the lubrication will help yet do you think that corrosion along the slides is a factor? Did it work and I will look for a update of this video Tuff guy. Lol.

• 
  @327JohnnySS3 жыл бұрын

  Wow, That's awesome. Congratulations. Looks bad $zz.

• 
  @diavuno38353 жыл бұрын

  I wonder what the best lubricant is... I want to say a dry lube like tephlon.... But I don't think it'll stay after a good rain.

• 
  @leeksoup31993 жыл бұрын

  Do you know where I could get that black metal plate that the motor mounts to? Mine is completely rusted and is unsaveable.