Пікірлер

• 
  @monicat67972 күн бұрын

  THIS HELPED ME OUT ALOT! I just 3d printed the skeletal structure of it

• 
  @J.KINGTOONZ2 күн бұрын

  That's good to hear and nice man, I wish I had a 3d printer 😢

• 
  @monicat67972 күн бұрын

  @@J.KINGTOONZ GET ONE BRO!! you can get a good ender printer for like a 100 bucks which is pretty cheap considering the other prices for other printers

• 
  @monicat67972 күн бұрын

  @@J.KINGTOONZ if you can afford a printer and a couple spools of filament, buy one! don't ya remember that old saying? when jobs give you money, buy a 3d printer!

• 
  @Visible_guy1345 күн бұрын

  Bro the number 3 looking attachment is not budging to the leg

• 
  @J.KINGTOONZ5 күн бұрын

  Yeah you got to push against a table or something, like I did with the back of my piliers but also not to break it at the same time xD. Make sure the 3 is facing the right way, you want the mid of the 3 facing outward so you can connect the knee covering to it later.

• 
  @SigmaTrigga7 күн бұрын

  My hip section is all busted and won’t clip in for anything

• 
  @J.KINGTOONZ5 күн бұрын

  mmm that's strange but it generally doesn't clip in nicely either, try rotating the joints 180 and clip the hip covering on again so... maybe the one side doesn't clip properly to the other side.

• 
  @FrenkJanse8 күн бұрын

  Now record one with focus on the parts ......

• 
  @BrianAndrews-uh9ws10 күн бұрын

  I cant connect the chest to the mid part it keeps falling off

• 
  @J.KINGTOONZ5 күн бұрын

  Did you use the longest hook joint in the abdomen section, mine also kept falling off because the chest cover pinches against the abdominal section which prevents a lot of back and forward motion, so it does tend to pop off that's if you move it too much over a certain point. So you have to move the hip section if you want a more bent pose.

• 
  @khalilnery11 күн бұрын

  Khalil kaioken x100

• 
  @JustKaii211 күн бұрын

  The headpart don't fits on mine

• 
  @J.KINGTOONZ5 күн бұрын

  Does it keep popping off?

• 
  @JustKaii24 күн бұрын

  @@J.KINGTOONZ yes

• 
  @HasnaRimi13 күн бұрын

  Yo i have a problem with the knee part what do i do

• 
  @J.KINGTOONZ13 күн бұрын

  Are you talking about the knee cap?

• 
  @HasnaRimi13 күн бұрын

  @@J.KINGTOONZ ye and the shoulder cap it doesnt fit allat

• 
  @J.KINGTOONZ12 күн бұрын

  @@HasnaRimi Did you put it on the right way? Try straighten the leg and gently press against a table to connect the knee cap to the leg, there should be a small protruding piece that it clips onto.

• 
  @Saad-hv1km14 күн бұрын

  This helped me so much

• 
  @J.KINGTOONZ13 күн бұрын

  I'm glad 👍

• 
  @wallfebox23 күн бұрын

  4:52

• 
  @leahskycolor23 күн бұрын

  what-

• 
  @Moderator_unit124 күн бұрын

  Auch auf Deutsch

• 
  @Moderator_unit124 күн бұрын

  NEIN NEIN NEIN

• 
  @purp_cubie24 күн бұрын

  Mine was too hard bcz the chest part doesn't fit 3:18

• 
  @J.KINGTOONZ24 күн бұрын

  Yes it doesn't line up nicely with the back holes but try dipping it in lukewarm water(not boiling water) and then gently attaching the yellow to the black skeletal part, it wont completely fit perfectly but it will still function and fit better than before.

• 
  @brother-sergeantvictorious7726 күн бұрын

  i LOVE Saitama bro, have him as my screensaver for my desktop background. But on my screen saver for the desktop when it's not logged in, so the one you see as soon as you turn the monitor on? Yeah I have Super saiyan Goku. Saitama is not beating Broly.

• 
  @J.KINGTOONZ25 күн бұрын

  Nice man, Goku is my favourite but I just have a default windows background🤣.So you say Broly will win then? I guess we will have to wait and see XD.

• 
  @dafuqdoon-27 күн бұрын

  this video helped me alot i had to make 3

• 
  @J.KINGTOONZ27 күн бұрын

  Damn 3, that must of taken long to connect all those parts together 💀

• 
  @RobloxKidd352521 күн бұрын

  Oh yea I have 6 bro 😂💀

• 
  @J.KINGTOONZАй бұрын

  SHOULD I MAKE A SHORT STOP MOTION OF THIS GUY?

• 
  @mrpoopi402729 күн бұрын

  Yes make a stop motion

• 
  @_A_q_u_a_Ай бұрын

  3d printing them bigger and then assembeling them ist so much easier

• 
  @J.KINGTOONZАй бұрын

  True and less likely to break.

• 
  @vinceveloce9897Ай бұрын

  Thanks, it help me out a lot.

• 
  @J.KINGTOONZАй бұрын

  I'm glad it helped someone😁

• 
  @Guesty_AnimationsOfficialАй бұрын

  I GOT THE BLACK ONE 😢😢😢😢 I CANT FIND THE JOINTS 😭😭😭😭

• 
  @J.KINGTOONZАй бұрын

  I see what you did there😂 I hope you find them😅🙏

• 
  @vinceveloce9897Ай бұрын

  Lol.

• 
  @sumreenabdullah49298 күн бұрын

  I also got a black one but I first put all of them apart for the jointment of 3d print than I closely looked at all the peoces and focused alot. Took me like 1-2 hours to build

• 
  @vinceveloce98978 күн бұрын

  @@sumreenabdullah4929 @Guesty_AnimationsOfficial joke was funnier.

• 
  @user-nh9qc9ei4zАй бұрын

  999 лайков?

• 
  @settagashista142Ай бұрын

  instead of killing tien like that, be original and give Z warriors some shine, bcs we have enough goku centrist things

• 
  @J.KINGTOONZАй бұрын

  Haha that is true.

• 
  @PhantomAK-vg3gkАй бұрын

  yo this looks cool, keep working on it

• 
  @J.KINGTOONZАй бұрын

  Thanks man🙏

• 
  @nikislay3411Ай бұрын

  I had to throwaway my first one and buy another one lol 😂

• 
  @rafid917Ай бұрын

  Waiting for the continuation of Broly vs Saitama part 4

• 
  @J.KINGTOONZАй бұрын

  Which part was the best so far?

• 
  @rafid917Ай бұрын

  part 1 Oke?

• 
  @arnelgutierezmedico9440Ай бұрын

  I think it will be easy for me cause i'm a great builder of Lego🙃

• 
  @J.KINGTOONZАй бұрын

  Yes but Lego is made differently, you should give it a try. It's mainly trying to connect the pieces that don't fit nicely together, which is the main problem in this figure.

• 
  @tonysmith5101Ай бұрын

  Saitama is not gonna start off with a serious punch

• 
  @J.KINGTOONZАй бұрын

  Why do you say that?

• 
  @RIP_KATAKURI976Ай бұрын

  I had so many problems of mine i had to throw some peices just to connect a joint

• 
  @J.KINGTOONZАй бұрын

  😂 I feel the frustration

• 
  @jordanchristopher324427 күн бұрын

  Same bro it was so hard for me to put the arms on practically threw it

• 
  @J.KINGTOONZ27 күн бұрын

  @@jordanchristopher3244 😱 I hope its okay now😂

• 
  @AbramBarraza-jw4cu19 күн бұрын

  This is almost as bad as Lego

• 
  @user-yv5br7vl6qАй бұрын

  For me the little parts are the most hardest part to put on probably going to take a other 3 hours

• 
  @J.KINGTOONZАй бұрын

  Goodluck! 🙏

• 
  @AnimeCentralHubАй бұрын

  Cool animation, wanna collab?

• 
  @J.KINGTOONZАй бұрын

  Thanks man and yes we can but not right now.

• 
  @AnimeCentralHubАй бұрын

  @@J.KINGTOONZ ok

• 
  @referee1984Ай бұрын

  Mine was having a really big problem Like the body dont comnect or it doesn't fit through cus its too big

• 
  @J.KINGTOONZАй бұрын

  Mine was big too. I had to heat it up a little and squeeze it a bit with pliers but not too much else you might break it. Then I pressed down against my table and it eventually popped in place.

• 
  @maycomorel6726Ай бұрын

  Battle of the Titans brother!🤯💯

• 
  @ITSMEJACOBFUNKOАй бұрын

  This fight isn’t even close saitama destroys broly

• 
  @luiscruzberiguete6803Ай бұрын

  Lo que tu digas fan promedio de opm

• 
  @dontreadmyaboutpage8Ай бұрын

  Bruh, you didn't even watch dragon ball

• 
  @ITSMEJACOBFUNKOАй бұрын

  @@dontreadmyaboutpage8 actually I have buddy

• 
  @DylanYTCapcut24 күн бұрын

  @@ITSMEJACOBFUNKOcap

• 
  @DylanYTCapcut24 күн бұрын

  @@ITSMEJACOBFUNKOneither of them can beat goku and goku has to go ui for broly but ssjb for saitama so cappp

• 
  @ryeleebuchanan6199Ай бұрын

  Rip The Fake Saitama and Broly voices from the last two parts

• 
  @vasilijekrstic9502Ай бұрын

  Had to glue some of my dummy 13 cause some of the joints didnt want to connect, i also have a fake one

• 
  @J.KINGTOONZАй бұрын

  Yeh it's not as easy as some videos make it to believe 😂

• 
  @empty_namАй бұрын

  this is genuinely really good, i dont know how this hasnt gotten more views yet

• 
  @J.KINGTOONZАй бұрын

  Thanks for the support 💪

• 
  @CJMSirАй бұрын

  Ordinary dragon ball z fan

• 
  @dontreadmyaboutpage8Ай бұрын

  So what?

• 
  @dontreadmyaboutpage8Ай бұрын

  Is there a problem?

• 
  @lowiqleftist8940Ай бұрын

  I understand anime artists don't want to disappoint Dragon Ball Z fans by acknowledging Saitama can't be defeated by any amount of power.... But Broly being the villain makes for a great action fight without the devastation of your favorite DBZ character losing.... Can't wait to see the final outcome!

• 
  @J.KINGTOONZАй бұрын

  I hope it will not disappoint you 😅

• 
  @s..k.l629929 күн бұрын

  Power ? Not Ki... Old Broly can destroy an galaxy in SSJ2

• 
  @lowiqleftist8940Ай бұрын

  Knowing Saitama doesn't lose, how long before Saitama hits Broly with a "Death" punch and ends it is the question.

• 
  @OppoA5s-zq8kpАй бұрын

  😮

• 
  @Igivecredits_1Ай бұрын

  Am having trouble connecting the first one

• 
  @J.KINGTOONZАй бұрын

  Yes, it's not easy if you get a knock off like mine, the joints are rigid and not very smooth to slide in each other. They can get stiff and sticky, you might need a little force to combined them but be careful not to push to hard on the small edges because they can break, like I did to mine. I super glued that piece that broke and its not noticeable unless I actually point it out😂

• 
  @danielapociumbeanu3406Ай бұрын

  It took me days to assemble like im still working on it😂😂😂😂

• 
  @J.KINGTOONZАй бұрын

  @@danielapociumbeanu3406 Damn..that's crazy 😂 but you will eventually get there XD. I hope 🤣

• 
  @RobloxKidd352521 күн бұрын

  Me too

• 
  @Igivecredits_1Ай бұрын

  So hard to assemble

• 
  @TMTvshortАй бұрын

  Saitama❤❤❤

• 
  @ahzeehАй бұрын

  Saitama enjoying the fight😂

• 
  @J.KINGTOONZАй бұрын

  Yeh not a one punch fight😂

• 
  @Izaac85PC2 ай бұрын

  ....Let me ask you something when people do these types of animations, you know the "Saitama vs whoever" things, are you trying to convince people that this is true? Cause I can asure you the only people your convincing are the One Punch Man fans (And no one else BUT the One Punch Man fans)

• 
  @J.KINGTOONZ2 ай бұрын

  I'm not convincing anyone, I'm doing animation from what I see that's currently happening in each series. When it comes to the power levels, techniques I animate character that are most likely to win without any bias. People make up their own power levels etc but if you actually know both anime and how each handle their situations, you can get a better assumption on what their power levels are and the most possible realistic outcome.

• 
  @Izaac85PC2 ай бұрын

  @@J.KINGTOONZ "Most likely to win" huh, seems like bias

• 
  @Izaac85PC2 ай бұрын

  @@J.KINGTOONZ You know what scratch that, whos universe is this taking place in Saitama's universe or Dragon Ball verse, cause I found out saitama's "Infinite scaling" only aplys to his universe.

• 
  @J.KINGTOONZ2 ай бұрын

  @@Izaac85PC The answer you are looking for is in part 1, let me know what it is after you watch it.

• 
  @Izaac85PC2 ай бұрын

  @@J.KINGTOONZ Alright so Broly's in Saitama's universe, so fine I guess i'll leave you to your animating, so bye now (Cross this out)

• 
  @MayaCisse-kk1wk2 ай бұрын

  😅 team saitama

• 
  @J.KINGTOONZ2 ай бұрын

  😱