Thank you so much for this invaluable information! This will help solve a huge roadblock in my current project. I'll be able to cut the cost in half now. Great video sir!!!
@RemmondSoftTechInc10 сағат бұрын
Good stuff, able to adapt to male version. Thanks
@paulw314Күн бұрын
Yep i know this... still better with peanut butter. Just need better traps 😉
@paulw314Күн бұрын
Just a point before i watch on... wear gloves before touching a trap. They smell human scent! They're clever!
@janetkiel3 күн бұрын
The glued pretzel really worked!!!! Cheers to you and thank you.
@eugenegress58964 күн бұрын
Other Fun modification....sharpen brad nails, and silver solder 4 of them to the Bail wire. It becomes the Impailer Gladiator.
@natalieoaklander49207 күн бұрын
I have spent over a month trying to trap a mouse in my kitchen. Today, I put a chewed up tootsie roll on the mouse trap, and within a couple hours, he's trapped. Thank you!!!
@MrNiceCobra8 күн бұрын
Just moisten small piece of bread ( or similar staff), make small ball of it and wrap around trigger. Let dry until firm and use trap. You may mix bread with peanut butter or seeds or raisin etc if you wish.
@edisonkillingelephants12 күн бұрын
If the cable you are using has a PVC outer jacket be mindful that once heated to a certain temperature, it forms hydrochloric acid
@097311062614 күн бұрын
Can you guide me to draw thread on a tapered cylinder at a 15 degree angle in spaceclaim software. thank you
@097311062614 күн бұрын
Can you guide me to draw thread on a tapered cylinder at a 15 degree angle in spaceclaim software. thank you
@briandotson873515 күн бұрын
Spark arrester could be full of carbon that could keep it from starting as well.
@ememeable16 күн бұрын
Sir I pray God forgive your sick joke It is really an expensive one I just unsubscribed from it Peoples lives have been ruined by arrogant and ignorant people playing God in the medical field and else where. You are really adding salt to injury These people are crying because their lives have been ruined and you want to joke about it You must be absolutely desperate and heartless I hope people never get to joke about your miserable life
@jessicaashley607716 күн бұрын
2/2 with Starbursts! Thank you!
@mickricereto801217 күн бұрын
OK, on day 6 over here with traps being licked clean. I'm trying for RATS now, not mice. I had that tootsie roll completely wrapped like you did, 100% molded and formed around the trigger pad. And yet it is gone. The other 2 traps are "kill bar" plastic models and they are cleaned out too, over and over. COULD IT BE that even though I have rat holes in my garden the mice are the ones getting away with the bait?? I can't see how they can unravel a solidified tootsie roll without blowing the trigger.
@paulw31418 күн бұрын
I actually have a phobia of peanut butter but I still use it on traps. I will try your chicken wing idea but when it comes to peanut butter you're using the wrong trap. Try a footplate victor trap and get thick peanut butter and try to jam some of the bits of nut in the gaps for them to tug on. As for cheese, it is as you say a myth. In actual fact they don't like cheese at all. They love nuts! I had a double catch using victor foot pedal traps with corse peanut butter jamming bits of nut into in. I even had a trebble at one point although 2 of them were babies. These victor traps I use are sold here in the UK and they claim they are "pre-bated". I've never tried them without a bate but they work great with peanut butter. 🤮 It's just hard for me due to my phobia.
@crct200421 күн бұрын
It's so hard to find how to videos that aren't commercials anymore. This was actually very useful. Thank you.
@garyr702727 күн бұрын
For elbows, and or bends insert a flexable stainless steel shower hose in the pipe to keep it from kinking. Just be sure the hose doesn't have ends on it or you won't get it back out the pipe without cutting it to remove it.
@HeatherBDentureDiVa27 күн бұрын
Peanut butter works on other traps but he ate the peanut butter clean off. This evil mighty mouse took bate use also tiny amount. People put a lot of bate you can't. A tiny speck of peanut butter or I used fluff. Sticky and can't be moved. Don't ever use Krazy glue bc the smell is strong like nail glue. Don't use
@DavidLeeMenefeeАй бұрын
Thank you for this, it's easy wants you know how. Dave
@guilemiran4059Ай бұрын
I tried the dog bait and it hasn't worked its been 4 days.
@LarsenLocksmithАй бұрын
I'm glad I questioned the possibility and found your site. Thanks.
@paxetbonum4420Ай бұрын
They ignore peanut butter. They move trying to and go around it. High I Q mice? What now?
@Goku14635Ай бұрын
You’re doing something wrong or using the wrong kind of trap if the rodents keep licking the traps clean without setting them off. Mice and rats love peanut butter because it’s sweet, oily, and similar to what they eat in the wild (nuts and legumes). Every time I’ve had to get rid of mice, small amounts of peanut butter plus Victor snap traps with the yellow pedal work fine. Even in this video you imply several times that the rodents are attracted to stuff that’s sweet and sticky which contradicts your point about that kind of bait not being effective. Either set up your traps more efficiently or invest in better traps (or figure out how they keep showing up in the first place).
@SLLindstromАй бұрын
Had a 50% percent ratio tried your second methods and hot damn if it didn't work 99% percent of the time! Thanks!!! 👍
@5R_YTАй бұрын
Work in mobile redio Antina
@linkpeters5990Ай бұрын
I am in the category of beginners to MIT app Inventor: I found your presentation to be very explanatory. If possible, I would of like to see you additionally apply the program to a circuit with a Bluetooth device maybe controlling a motor...etc
@markmin7382Ай бұрын
Hi what the model arduino you use
@Haru-qq8eiАй бұрын
This has been 5 years How about the tablet?
@lennonjames3871Ай бұрын
Dude you need a better trap them ones is junk.😂
@mariuszhadrianАй бұрын
boiled burger -- will try
@tommyulman6623Ай бұрын
this is a very good video but i cant tell which hole you stick the bracket through on the engine pulley i have been fighting with this mower for a couple years trying to figure out why it has such a bad vibration when engaging blades i think this bracket could be my problem cause i can take the belt off without removing it thanks for any information
@VOOODOOO37Ай бұрын
Minnesota?
@user-hy2nh7bh3rАй бұрын
I use a bit of raw bacon. works every time.
@normanhammond4259Ай бұрын
No demonstration for catching mice. Poor review.😢
@XenaFeddaАй бұрын
Best vid
@user-dp3ky3cm4lАй бұрын
Yeah, put your scent all over the trap🙄😠
@chepz81Ай бұрын
I've had lots of success with Freeze Dried chicken dog treats, plugs my love them!
@tommyulman6623Ай бұрын
i have a yardmachine 42" made by mtd has a terrible vibration when engaging deck ive replaced both spindles all 4 pulleys and the engine pulley idler arm both blades and the belt and it has the exact same vibration it had with all the old parts any suggestions on what to try any help will be appreciated thanks
@bonjovi9285Ай бұрын
PB on the bottom didn't work for me however Tootsie rolls are amazing. Prior to this I've caught maybe 3 in the last month or so with PB. Enter the Tootsie roll, 6 in 2 days! Thank you, thank you, thank you!!!
@bonjovi9285Ай бұрын
I recently cleaned out my storage room and found that they were going for lentils so I started using lentils for bate as well and 2 more in 2 days. Now in 10 days I'm up to 15! 🎉
@hachemuve6759Ай бұрын
I cannot see what part of the jack is soldered to the cable, can you tell it? Thanks and great video!
@taylor2258Ай бұрын
My car locks will go crazy and the radio screen turns off and on. Sometimes won’t start? Will this fix it?
@Michaelobama1842 ай бұрын
Can you add some obnoxious Rap music to your video where I can't hear anything you are saying 😅
@robseale172 ай бұрын
100% solid advice. Thank you! I used starburst and worked like a charm. Brilliant.
@paykus342 ай бұрын
Get a camera person to see it
@boabglen2 ай бұрын
I used super glue insteas of hot glue on my trap. Bad idea?
@geneticdisorder19002 ай бұрын
To catch the really small mice, use three traps together and make a T with them. Put the first trap against a wall so it snaps towards the wall, then put one on both sides of first trap. PB works great, the mouse will eat the PB on first trap. Then it will turn around and start eating the PB on the next two, S N A P, as it’s enjoying its last meal.
@Joani1612 ай бұрын
I caught 3 with peanut butter, the last 2 by putting it under and back by the swivel and even the spring and not very much. One trap disappeared.
@tazwartousif20642 ай бұрын
I used a 9V battery the Arduino nano started to get heated up and also the voltage regulator gets really hot. So what should i do?
@JohnMessage2 ай бұрын
Peanut butter works 100% in live trap. I set out tootsie rolls ... mice never touched them (game camera).
Пікірлер
Thank you so much for this invaluable information! This will help solve a huge roadblock in my current project. I'll be able to cut the cost in half now. Great video sir!!!
Good stuff, able to adapt to male version. Thanks
Yep i know this... still better with peanut butter. Just need better traps 😉
Just a point before i watch on... wear gloves before touching a trap. They smell human scent! They're clever!
The glued pretzel really worked!!!! Cheers to you and thank you.
Other Fun modification....sharpen brad nails, and silver solder 4 of them to the Bail wire. It becomes the Impailer Gladiator.
I have spent over a month trying to trap a mouse in my kitchen. Today, I put a chewed up tootsie roll on the mouse trap, and within a couple hours, he's trapped. Thank you!!!
Just moisten small piece of bread ( or similar staff), make small ball of it and wrap around trigger. Let dry until firm and use trap. You may mix bread with peanut butter or seeds or raisin etc if you wish.
If the cable you are using has a PVC outer jacket be mindful that once heated to a certain temperature, it forms hydrochloric acid
Can you guide me to draw thread on a tapered cylinder at a 15 degree angle in spaceclaim software. thank you
Can you guide me to draw thread on a tapered cylinder at a 15 degree angle in spaceclaim software. thank you
Spark arrester could be full of carbon that could keep it from starting as well.
Sir I pray God forgive your sick joke It is really an expensive one I just unsubscribed from it Peoples lives have been ruined by arrogant and ignorant people playing God in the medical field and else where. You are really adding salt to injury These people are crying because their lives have been ruined and you want to joke about it You must be absolutely desperate and heartless I hope people never get to joke about your miserable life
2/2 with Starbursts! Thank you!
OK, on day 6 over here with traps being licked clean. I'm trying for RATS now, not mice. I had that tootsie roll completely wrapped like you did, 100% molded and formed around the trigger pad. And yet it is gone. The other 2 traps are "kill bar" plastic models and they are cleaned out too, over and over. COULD IT BE that even though I have rat holes in my garden the mice are the ones getting away with the bait?? I can't see how they can unravel a solidified tootsie roll without blowing the trigger.
I actually have a phobia of peanut butter but I still use it on traps. I will try your chicken wing idea but when it comes to peanut butter you're using the wrong trap. Try a footplate victor trap and get thick peanut butter and try to jam some of the bits of nut in the gaps for them to tug on. As for cheese, it is as you say a myth. In actual fact they don't like cheese at all. They love nuts! I had a double catch using victor foot pedal traps with corse peanut butter jamming bits of nut into in. I even had a trebble at one point although 2 of them were babies. These victor traps I use are sold here in the UK and they claim they are "pre-bated". I've never tried them without a bate but they work great with peanut butter. 🤮 It's just hard for me due to my phobia.
It's so hard to find how to videos that aren't commercials anymore. This was actually very useful. Thank you.
For elbows, and or bends insert a flexable stainless steel shower hose in the pipe to keep it from kinking. Just be sure the hose doesn't have ends on it or you won't get it back out the pipe without cutting it to remove it.
Peanut butter works on other traps but he ate the peanut butter clean off. This evil mighty mouse took bate use also tiny amount. People put a lot of bate you can't. A tiny speck of peanut butter or I used fluff. Sticky and can't be moved. Don't ever use Krazy glue bc the smell is strong like nail glue. Don't use
Thank you for this, it's easy wants you know how. Dave
I tried the dog bait and it hasn't worked its been 4 days.
I'm glad I questioned the possibility and found your site. Thanks.
They ignore peanut butter. They move trying to and go around it. High I Q mice? What now?
You’re doing something wrong or using the wrong kind of trap if the rodents keep licking the traps clean without setting them off. Mice and rats love peanut butter because it’s sweet, oily, and similar to what they eat in the wild (nuts and legumes). Every time I’ve had to get rid of mice, small amounts of peanut butter plus Victor snap traps with the yellow pedal work fine. Even in this video you imply several times that the rodents are attracted to stuff that’s sweet and sticky which contradicts your point about that kind of bait not being effective. Either set up your traps more efficiently or invest in better traps (or figure out how they keep showing up in the first place).
Had a 50% percent ratio tried your second methods and hot damn if it didn't work 99% percent of the time! Thanks!!! 👍
Work in mobile redio Antina
I am in the category of beginners to MIT app Inventor: I found your presentation to be very explanatory. If possible, I would of like to see you additionally apply the program to a circuit with a Bluetooth device maybe controlling a motor...etc
Hi what the model arduino you use
This has been 5 years How about the tablet?
Dude you need a better trap them ones is junk.😂
boiled burger -- will try
this is a very good video but i cant tell which hole you stick the bracket through on the engine pulley i have been fighting with this mower for a couple years trying to figure out why it has such a bad vibration when engaging blades i think this bracket could be my problem cause i can take the belt off without removing it thanks for any information
Minnesota?
I use a bit of raw bacon. works every time.
No demonstration for catching mice. Poor review.😢
Best vid
Yeah, put your scent all over the trap🙄😠
I've had lots of success with Freeze Dried chicken dog treats, plugs my love them!
i have a yardmachine 42" made by mtd has a terrible vibration when engaging deck ive replaced both spindles all 4 pulleys and the engine pulley idler arm both blades and the belt and it has the exact same vibration it had with all the old parts any suggestions on what to try any help will be appreciated thanks
PB on the bottom didn't work for me however Tootsie rolls are amazing. Prior to this I've caught maybe 3 in the last month or so with PB. Enter the Tootsie roll, 6 in 2 days! Thank you, thank you, thank you!!!
I recently cleaned out my storage room and found that they were going for lentils so I started using lentils for bate as well and 2 more in 2 days. Now in 10 days I'm up to 15! 🎉
I cannot see what part of the jack is soldered to the cable, can you tell it? Thanks and great video!
My car locks will go crazy and the radio screen turns off and on. Sometimes won’t start? Will this fix it?
Can you add some obnoxious Rap music to your video where I can't hear anything you are saying 😅
100% solid advice. Thank you! I used starburst and worked like a charm. Brilliant.
Get a camera person to see it
I used super glue insteas of hot glue on my trap. Bad idea?
To catch the really small mice, use three traps together and make a T with them. Put the first trap against a wall so it snaps towards the wall, then put one on both sides of first trap. PB works great, the mouse will eat the PB on first trap. Then it will turn around and start eating the PB on the next two, S N A P, as it’s enjoying its last meal.
I caught 3 with peanut butter, the last 2 by putting it under and back by the swivel and even the spring and not very much. One trap disappeared.
I used a 9V battery the Arduino nano started to get heated up and also the voltage regulator gets really hot. So what should i do?
Peanut butter works 100% in live trap. I set out tootsie rolls ... mice never touched them (game camera).