It’s slop in the transmission. You can verify it by removing the belt then turn the input shaft (the driven clutch) by hand and you can tell there is a lot play in the rotation until it actually turns the output shaft.
@SergeMartin-c9z15 күн бұрын
Listen i have that problem on mine also, samething your saying, off Weight n.p., with weight from reverse to low gear and vise versa, alors that Cluck sound. Changed all my suspension bushing, rear wheel bearing,removed clutch, inspect it, put it Back samething, to find out that the 2 upper bolts of rear deff were loose and the bottom one close to the drive shaft was Also loose. Unfortunatly to tighten them needed to removed... Again my upper tables to reach th2 bolts, and removed tie rods and shocks to tight the one close to the deff. This fixed my cluck problem, meanwhile with time i Will see damaged the aluminum deff.housing.if so Will need to oversize bolts and housing. Will see with time. Hope this helps you out.
@SergeMartin-c9z15 күн бұрын
Listen i have that problem on mine also, samething your saying, off Weight n.p., with weight from reverse to low gear and vise versa, alors that Cluck sound. Changed all my suspension bushing, rear wheel bearing,removed clutch, inspect it, put it Back samething, to find out that the 2 upper bolts of rear deff were loose and the bottom one close to the drive shaft was Also loose. Unfortunatly to tighten them needed to removed... Again my upper tables to reach th2 bolts, and removed tie rods and shocks to tight the one close to the deff. This fixed my cluck problem, meanwhile with time i Will see damaged the aluminum deff.housing.if so Will need to oversize bolts and housing. Will see with time. Hope this helps you out.
@Deerector15 күн бұрын
Awesome. I’m gonna try this this summer
@SergeMartin-c9z15 күн бұрын
Listen i have that problem on mine also, samething your saying, off Weight n.p., with weight from reverse to low gear and vise versa, alors that Cluck sound. Changed all my suspension bushing, rear wheel bearing,removed clutch, inspect it, put it Back samething, to find out that the 2 upper bolts of rear deff were loose and the bottom one close to the drive shaft was Also loose. Unfortunatly to tighten them needed to removed... Again my upper tables to reach th2 bolts, and removed tie rods and shocks to tight the one close to the deff. This fixed my cluck problem, meanwhile with time i Will see damaged the aluminum deff.housing.if so Will need to oversize bolts and housing. Will see with time. Hope this helps you out.
@bubbablaylock24421 күн бұрын
did you ever get a answer to the clunking noise?
@Deerector21 күн бұрын
No but I stopped looking because it’s so common and the quad never has any issues. I use it exclusively for plowing and the machine has never ever let me down.
@AFC-nl7pzАй бұрын
Did you ever fix this? If what was it?...tia
@DeerectorАй бұрын
Nah. It really has no effect on anything and it appears like it’s just slop in the driveline system. Apparently it’s on almost if not all of them. And I work this quad hard. If there was something wrong, it woulda broke already.
@timseles30442 ай бұрын
It the clutch.. all 4 stokes do it its the down shift on the weights
@AlanPeebles-zo1kt4 ай бұрын
Sounds like an exhaust damper. Is there one on this?
@trevorhall62864 ай бұрын
Its the EBS helix rollers . Engin break !!..
@davidzachary54234 ай бұрын
How did this guy not even get NOMINATED for an Emmy?? Its criminal!!
@user-ei9cz2uj8b5 ай бұрын
I am considering the boss straight plow for my ATV. Which would you recommend, Polly or steal blade and why?
@SuperSYMPATHIZER5 ай бұрын
Need longer videos
@Hammerback9726 ай бұрын
Friend of mine had a similar sound. It was inner CV joint on right rear. But our sportsmans are old. No idea what a new machine would feel/sound like
@paulmiller65148 ай бұрын
Sounds like a rear u joint
@CPthetooladdict9 ай бұрын
Wheres your helmet captian saftey? Hypocrite
@CPthetooladdict9 ай бұрын
Its hilarious your out giving advice while not riding a four wheeler with a helmet typical hypocrite
@Deerector9 ай бұрын
Helmet? While plowing. And how am I going to see? Would that be any safer? 😂😂😂😂😂 go make another dangerous video😂
@Deerector9 ай бұрын
No but most people say it’s slop in the rear diff. The u joint. I only use my quad in the winter so I haven’t really checked into it but i will soon. I do know that nothing is broke or will break. I only do plowing on this so if anything was messed up, it woulda been destroyed by now.
@jeffreyd31749 ай бұрын
Have a new 570 Sportsman with 6 hours on it and is making this fucking noise. I guess they're refusing to do anything about this? Do you have an update on yours?
@Mooseknuckle7139 ай бұрын
U joint
@markshimanek277010 ай бұрын
Hold front brake as you accelrate
@hermanheine329110 ай бұрын
It is from where the axle is connected to the differential . slightly loose fit. wiggle the shaft on the diff and you will see
@jasonsnyder8182 Жыл бұрын
Man sound like control arm bushing
@andoncoward3503 Жыл бұрын
I have a 2019 570 and it makes the noise when I’m going about 20-35 kmh any suggestion
@lance-ll5wi Жыл бұрын
I have the same problem on my 2022 850 try taking the rear shaft off and try it then and tell me if that works that'll tell you if it's a rear end or the clutches
@bobby_D Жыл бұрын
He pulls up the sleeves haha. That’s exactly what Chris did. I don’t know why I’m obsessed with this all of a sudden in 2023 on a random Saturday.
@Deerector Жыл бұрын
Thank you Bobby. Yeah man. This is my cousin doing the impersonation. We shot it in my basement. We met Mad Dog since. He’s even done impersonations in front of Dog. My cousin is talented for sure. 👍🏼❤️
@bobby_D Жыл бұрын
Broooo 😂😂😂😂😂😂 I can’t!! See ya! 3:44 This is hilarious if you know Mad Dog from the FAN days. This is phenomenal!!!
@bobby_D Жыл бұрын
This is the most EPIC impersonation of Chris Russo of ALL TIME. this is absolutely incredible. And I saw it when it first came out. I just thought about it today at work out of the blue and wanted to see it again. EPIC rant by Chris Russo about PAC Man Jones and EPIC copy of Chris and that rant right here. AMAZING!!
@kipperlane5589 Жыл бұрын
My 330 does it in forward motion drives me crazy
@dylangreene9644 Жыл бұрын
It’s what they do 23 850 here and it clunks, will not effect long term use
@markcollins5026 Жыл бұрын
Man, I recently got a new 2022 sportsman 450, mine clunks out on the trail, sounds like drive line slop !
@Deerector Жыл бұрын
Yeah most do it. But I recently went over it again and it’s not the fluid being cold like I thought. It is indeed drive shaft slop. But don’t be concerned bro. My quad is still fine and I snow plow with it. It’s perfectly fine 👍🏼
@markcollins5026 Жыл бұрын
@@Deerector man. I'm gonna get out my grease gun today and grease the suspension fittings and the driveshaft fitting see if that helps, they usually don't come with much lube !
@Deerector Жыл бұрын
@@markcollins5026 it won’t eliminate that clunk but still def grease every zerk. I do it every year. There are lots of grease zerks on these machines and some are difficult to get to with a manual gun. I went and bought a Ridgid battery powered gun and my lord, one of the best decisions I ever made.
@luminosity9616 Жыл бұрын
My grandma lived near her. She was alone and lost her parents and she thought if she painted her house for Jesus three times every once in awhile it would save her from the end of the world. Mental illness is nothing to laugh at.
@zaidalhataba7512 Жыл бұрын
Helmet?
@georgewkush672 Жыл бұрын
Now that Mad Dog is on ESPN I hope people come back to revisit this brilliance
@MichiganPeatMoss Жыл бұрын
Oct 2022: Our 2021 570 will clunk on IDLE after it warms up and NOT at higher rpms. It has to heat up after a few miles. Otherwise around the yard for small jobs it'll never surface. Also removed both clutches and still happens. Seems to come from upper left of engine, again ONLY WHEN HOT. No extreme vibrations that makes it un drivable.
@angelmaldonado6435 Жыл бұрын
el mio es 2022 le pasa lo mismo es el cardan delantero tiene demasiado juego
@angelmaldonado6435 Жыл бұрын
It's the game of the front gimbal I have a 2022 just buying it several days later it started with the same sound
@angelmaldonado6435 Жыл бұрын
lo areglaste
@worktorideoutdoors4944 Жыл бұрын
My 2019 570 does it and I hate it. My buddy’s 2021 570 does not make it at all.
@FKNSENDIT Жыл бұрын
My 2020 hd8 has a clunk when u put in gear an start to go it sounds like my 08 silverado when the rear end when out something s outta wack idk where to start lookin
@anthonyarcanumsanctumregnu9551 Жыл бұрын
I use to drive by there every night, I swear I'm 46 now when I was about 22 I cursed out the window at her being a wide ass back then like most of us From Howard Beach and Ozone park at that age, I started speaking backwards for about 2 minutes to the point I almost cried and it stopped, I never messed around in front of her or her house again!
@MrWoodson22 Жыл бұрын
Great outfit! Where’d you find the jacket?
@Deerector Жыл бұрын
eBay and then I had velvet sewn onto the lapels
@MrWoodson22 Жыл бұрын
Man could you do me a favor and send me the link of the jacket on eBay. That’s amazing
@Deerector Жыл бұрын
@@MrWoodson22 oh no it was just some guy selling his plaid blazer from back in the day. It’s not a costume.
@joelittlefield1943 Жыл бұрын
Put. Weight. It clunks take away weight not as bad. Insepect drive shaft. Not chain drive is it
@joelittlefield1943 Жыл бұрын
Sounds like a. Drive line issue. A. Guys trying to sell one 700. Says its clunking
@seanjackson1888 Жыл бұрын
What the price of your setup....
@Deerector Жыл бұрын
Oh man. I’ve done even more since this video. The quad and everything I’d say about 25 grand
@ldeshner Жыл бұрын
This clunk for the most part is an engineering issue Polaris is well aware of it And does not seem to be affecting long term use
@garykennedy Жыл бұрын
I think this needs to be my Halloween costume this year. What style of hat is that? I can't seem to find something with that particular shape.
@Deerector Жыл бұрын
It’s a Russian hat. I forget the name but eBay I found one. They arent uncommon, you’ll find it simple
@garykennedy Жыл бұрын
@@Deerector cool! Thanks!
@coloradolivingchannel Жыл бұрын
“Enough’s Enough….ENOUGH’S ENOUGH”!
@b.pur9981 Жыл бұрын
What’s this guys accent? Cool….
@Deerector Жыл бұрын
Haha. NYC
@doondarwood3889 Жыл бұрын
This is one of my favorites. It's dead on. Still watching! 2022!
@Deerector Жыл бұрын
Thank you!! Yeah he did a great job.
@henrym2260 Жыл бұрын
No matter how much the mechanics at Polaris wants to put the bs corporate spin on this is a serious issue with Polaris and they need a recall or buy people out on their purchases.
Пікірлер
It’s slop in the transmission. You can verify it by removing the belt then turn the input shaft (the driven clutch) by hand and you can tell there is a lot play in the rotation until it actually turns the output shaft.
Listen i have that problem on mine also, samething your saying, off Weight n.p., with weight from reverse to low gear and vise versa, alors that Cluck sound. Changed all my suspension bushing, rear wheel bearing,removed clutch, inspect it, put it Back samething, to find out that the 2 upper bolts of rear deff were loose and the bottom one close to the drive shaft was Also loose. Unfortunatly to tighten them needed to removed... Again my upper tables to reach th2 bolts, and removed tie rods and shocks to tight the one close to the deff. This fixed my cluck problem, meanwhile with time i Will see damaged the aluminum deff.housing.if so Will need to oversize bolts and housing. Will see with time. Hope this helps you out.
Listen i have that problem on mine also, samething your saying, off Weight n.p., with weight from reverse to low gear and vise versa, alors that Cluck sound. Changed all my suspension bushing, rear wheel bearing,removed clutch, inspect it, put it Back samething, to find out that the 2 upper bolts of rear deff were loose and the bottom one close to the drive shaft was Also loose. Unfortunatly to tighten them needed to removed... Again my upper tables to reach th2 bolts, and removed tie rods and shocks to tight the one close to the deff. This fixed my cluck problem, meanwhile with time i Will see damaged the aluminum deff.housing.if so Will need to oversize bolts and housing. Will see with time. Hope this helps you out.
Awesome. I’m gonna try this this summer
Listen i have that problem on mine also, samething your saying, off Weight n.p., with weight from reverse to low gear and vise versa, alors that Cluck sound. Changed all my suspension bushing, rear wheel bearing,removed clutch, inspect it, put it Back samething, to find out that the 2 upper bolts of rear deff were loose and the bottom one close to the drive shaft was Also loose. Unfortunatly to tighten them needed to removed... Again my upper tables to reach th2 bolts, and removed tie rods and shocks to tight the one close to the deff. This fixed my cluck problem, meanwhile with time i Will see damaged the aluminum deff.housing.if so Will need to oversize bolts and housing. Will see with time. Hope this helps you out.
did you ever get a answer to the clunking noise?
No but I stopped looking because it’s so common and the quad never has any issues. I use it exclusively for plowing and the machine has never ever let me down.
Did you ever fix this? If what was it?...tia
Nah. It really has no effect on anything and it appears like it’s just slop in the driveline system. Apparently it’s on almost if not all of them. And I work this quad hard. If there was something wrong, it woulda broke already.
It the clutch.. all 4 stokes do it its the down shift on the weights
Sounds like an exhaust damper. Is there one on this?
Its the EBS helix rollers . Engin break !!..
How did this guy not even get NOMINATED for an Emmy?? Its criminal!!
I am considering the boss straight plow for my ATV. Which would you recommend, Polly or steal blade and why?
Need longer videos
Friend of mine had a similar sound. It was inner CV joint on right rear. But our sportsmans are old. No idea what a new machine would feel/sound like
Sounds like a rear u joint
Wheres your helmet captian saftey? Hypocrite
Its hilarious your out giving advice while not riding a four wheeler with a helmet typical hypocrite
Helmet? While plowing. And how am I going to see? Would that be any safer? 😂😂😂😂😂 go make another dangerous video😂
No but most people say it’s slop in the rear diff. The u joint. I only use my quad in the winter so I haven’t really checked into it but i will soon. I do know that nothing is broke or will break. I only do plowing on this so if anything was messed up, it woulda been destroyed by now.
Have a new 570 Sportsman with 6 hours on it and is making this fucking noise. I guess they're refusing to do anything about this? Do you have an update on yours?
U joint
Hold front brake as you accelrate
It is from where the axle is connected to the differential . slightly loose fit. wiggle the shaft on the diff and you will see
Man sound like control arm bushing
I have a 2019 570 and it makes the noise when I’m going about 20-35 kmh any suggestion
I have the same problem on my 2022 850 try taking the rear shaft off and try it then and tell me if that works that'll tell you if it's a rear end or the clutches
He pulls up the sleeves haha. That’s exactly what Chris did. I don’t know why I’m obsessed with this all of a sudden in 2023 on a random Saturday.
Thank you Bobby. Yeah man. This is my cousin doing the impersonation. We shot it in my basement. We met Mad Dog since. He’s even done impersonations in front of Dog. My cousin is talented for sure. 👍🏼❤️
Broooo 😂😂😂😂😂😂 I can’t!! See ya! 3:44 This is hilarious if you know Mad Dog from the FAN days. This is phenomenal!!!
This is the most EPIC impersonation of Chris Russo of ALL TIME. this is absolutely incredible. And I saw it when it first came out. I just thought about it today at work out of the blue and wanted to see it again. EPIC rant by Chris Russo about PAC Man Jones and EPIC copy of Chris and that rant right here. AMAZING!!
My 330 does it in forward motion drives me crazy
It’s what they do 23 850 here and it clunks, will not effect long term use
Man, I recently got a new 2022 sportsman 450, mine clunks out on the trail, sounds like drive line slop !
Yeah most do it. But I recently went over it again and it’s not the fluid being cold like I thought. It is indeed drive shaft slop. But don’t be concerned bro. My quad is still fine and I snow plow with it. It’s perfectly fine 👍🏼
@@Deerector man. I'm gonna get out my grease gun today and grease the suspension fittings and the driveshaft fitting see if that helps, they usually don't come with much lube !
@@markcollins5026 it won’t eliminate that clunk but still def grease every zerk. I do it every year. There are lots of grease zerks on these machines and some are difficult to get to with a manual gun. I went and bought a Ridgid battery powered gun and my lord, one of the best decisions I ever made.
My grandma lived near her. She was alone and lost her parents and she thought if she painted her house for Jesus three times every once in awhile it would save her from the end of the world. Mental illness is nothing to laugh at.
Helmet?
Now that Mad Dog is on ESPN I hope people come back to revisit this brilliance
Oct 2022: Our 2021 570 will clunk on IDLE after it warms up and NOT at higher rpms. It has to heat up after a few miles. Otherwise around the yard for small jobs it'll never surface. Also removed both clutches and still happens. Seems to come from upper left of engine, again ONLY WHEN HOT. No extreme vibrations that makes it un drivable.
el mio es 2022 le pasa lo mismo es el cardan delantero tiene demasiado juego
It's the game of the front gimbal I have a 2022 just buying it several days later it started with the same sound
lo areglaste
My 2019 570 does it and I hate it. My buddy’s 2021 570 does not make it at all.
My 2020 hd8 has a clunk when u put in gear an start to go it sounds like my 08 silverado when the rear end when out something s outta wack idk where to start lookin
I use to drive by there every night, I swear I'm 46 now when I was about 22 I cursed out the window at her being a wide ass back then like most of us From Howard Beach and Ozone park at that age, I started speaking backwards for about 2 minutes to the point I almost cried and it stopped, I never messed around in front of her or her house again!
Great outfit! Where’d you find the jacket?
eBay and then I had velvet sewn onto the lapels
Man could you do me a favor and send me the link of the jacket on eBay. That’s amazing
@@MrWoodson22 oh no it was just some guy selling his plaid blazer from back in the day. It’s not a costume.
Put. Weight. It clunks take away weight not as bad. Insepect drive shaft. Not chain drive is it
Sounds like a. Drive line issue. A. Guys trying to sell one 700. Says its clunking
What the price of your setup....
Oh man. I’ve done even more since this video. The quad and everything I’d say about 25 grand
This clunk for the most part is an engineering issue Polaris is well aware of it And does not seem to be affecting long term use
I think this needs to be my Halloween costume this year. What style of hat is that? I can't seem to find something with that particular shape.
It’s a Russian hat. I forget the name but eBay I found one. They arent uncommon, you’ll find it simple
@@Deerector cool! Thanks!
“Enough’s Enough….ENOUGH’S ENOUGH”!
What’s this guys accent? Cool….
Haha. NYC
This is one of my favorites. It's dead on. Still watching! 2022!
Thank you!! Yeah he did a great job.
No matter how much the mechanics at Polaris wants to put the bs corporate spin on this is a serious issue with Polaris and they need a recall or buy people out on their purchases.