…now you have to delete the original turn indicators, they seem too big…
@StreetRodAZКүн бұрын
I got rid of the Tuffside and switched to New Rage Cycles. Watch my other video. kzread.info/dash/bejne/fneMu7tvY8jbeZs.html
@jimmyjames180726 күн бұрын
what do u mean "got them back", u never had them to start with, dont even have them from factory
@StreetRodAZ26 күн бұрын
2020 has front running lights dude.
@javierreyes9940Ай бұрын
Love it!
@javierreyes9940Ай бұрын
Thank you for all the information on the street rod, not even harley davidson knows anything about them in 2024
@PontLimonАй бұрын
I have used epoxy mastic to get the needed shape of the mount for my helmet and than attached the mount to the helmet with two component epoxy glue. Now it is there for good! 👍 😁 It was my intention to attach it once and forever anyway, so why would I even think of using self adhesive?😎 For the rest, - this is a very good way out for people with difficult helmets 👍
@RobertHiggins-gv5jcАй бұрын
Sounds sick love it... take it out on a ride..
@VendettaFXRАй бұрын
Hi, your video is very thorough, and you worked exactly as I would have. The link you provided for the light bulb is no longer good. Can you please direct me to another H4 bulb where I can separate the housing piece, or do all of them do that?
@MortalTeaАй бұрын
Thanks for this video! it REALLY helped during install on mine. The downloadable instructions aren't that great. Thumbs up from UK 👍
@StreetRodAZАй бұрын
Glad it was helpful. It was one of my first vids and looking back in it... pretty rookie compared to my newer ones. Ride safe.
@vinprecipuo80432 ай бұрын
The instructions from the website say you dont need that metal bracket, tail light only bolts back in using the 2 8mm bolts.
@StreetRodAZ2 ай бұрын
This video was made 6 years ago for the first generation tail tidys. Things have changed since then.
@mnap894 ай бұрын
Is the FSK108 complete set I need? Or do I need to buy springs seperately?
@StreetRodAZ4 ай бұрын
complete set. springs and spacers.
@mnap894 ай бұрын
@@StreetRodAZThanks. Which one you think is better FSK108 or YSS Upgrade Kit? They are about the same price, but YSS have some kind of valve emulator?
@StreetRodAZ4 ай бұрын
You can never go wrong with Ohlins, but YSS makes good stuff too. Never personally bought YSS but they have a great rep. Based on my experience, I would go Ohlins.
@rossanocopetti62734 ай бұрын
ciaoscusami ti scrivo da italia, il manubrio che hai montato ha il filetto x i contrappesi originali? grazie.
@StreetRodAZ4 ай бұрын
No. Dovrai acquistarne di nuovi
@rossanocopetti62734 ай бұрын
@@StreetRodAZ grazie
@hotelposeidonio68854 ай бұрын
does the handlebar hits the fuel tank?
@StreetRodAZ4 ай бұрын
No
@Motobikereviews4 ай бұрын
I own the same bike and had great adventures in the Swiss alps on it
@TheRealCozy5 ай бұрын
Just now realized I don’t need to do the license plate delete since this deletes it. Might as well just get the axel plate holder
@StreetRodAZ5 ай бұрын
check out my other video on fabricating a license plate bracket for this tail tidy. It's super easy and super inexpensive
@Getlostray6 ай бұрын
Nice is such a nice mod, planning on doing on my XSR700 too :)
@JPS79136 ай бұрын
Excellent video. Very informative. 👍
@eddiedamman57737 ай бұрын
Great fun bike, have one as a daily, heaps of mods to make it go well, tuned with Screaming Eagle tuner and leads, hi flow S&S air cleaner, Vance and Hines pipe.👍
@larryrolph923110 ай бұрын
Do you still have the same LED headlight bulb from Superbright installed in your XSR700, the link isn't working so I was wondering which one it is. does it have the fog light version.
@StreetRodAZ10 ай бұрын
Try this one... www.superbrightleds.com/catalog/product/view/id/199788/category/2/?find=2019-yamaha-xsr700-high-beam-and-low-beam-headlight-bulb-base-4960537
@StreetRodAZ10 ай бұрын
That's the bulb.
@larryrolph923110 ай бұрын
Thanks much, just wanted to make sure I was getting the one you installed@@StreetRodAZ
@larryrolph923110 ай бұрын
got it, did you add the resister kit to it, or was it not necessary @@StreetRodAZ
@liamredpath305410 ай бұрын
Do these headlights work on a 2017 xsr700? Ive tried a vrand that assured me it would fit but the headsyncs get in the way of the clamp
@StreetRodAZ10 ай бұрын
Yes.
@skylerjmunk2045 Жыл бұрын
Hey there! Just wondering if you have updated your mapping since posting this video? I have a 2022 XSR700 with a Two Brother's Exhaust and a performance air filter system very similar to what you have. unfortunately, power commander doesn't have anything but a base tune for my bike right now. I was hoping I could see your map as a good place to start my tune from.
@StreetRodAZ Жыл бұрын
I got rid of the Power Commander about 2 years ago. Went with an ECU flash using Dynojet Power Vision 3. Waaaaay better. But I can see if I still have the map.
@StreetRodAZ Жыл бұрын
Hit me on Instagram so I can mesaage you if I have it.
@mustangrebuild Жыл бұрын
People liked it so much it comes stock on the 700 now lol
@ridinggravity703 Жыл бұрын
is it very slippery?
@StreetRodAZ Жыл бұрын
Nope. But Corbin has discontinued the solo seat for the XSR700.
@rossanocopetti6273 Жыл бұрын
ciao amico mio,io lo montato come te,ma si è piegato e rotto dove ce luce targa,forse le vibrazioni,ho messo 2 piastre di rinforzo,
@GarzaLovesYou Жыл бұрын
Do you not have to tune it or flash the ecu?
@StreetRodAZ Жыл бұрын
you do not. now if you also change your air filter, I highly recommend you do flash your ECU, or get a power commander. check out my other videos on ECU tuning .
@GarzaLovesYou5 ай бұрын
@@StreetRodAZ any chance we could get a video of it with the DB killer out?
@PantheonSE5 ай бұрын
@@GarzaLovesYou what DB killer? lol
@Mac1968ish Жыл бұрын
Great video thanks for posting it
@loekloekloek Жыл бұрын
Hey thanks for showing this rear mud guard. I'm actually thinking of just keeping the rear fender / chain guard off. Just leaving it without any guard. I love the clean naked look next to the shock. I live in Portugal and never ride in rain, but do sometimes go on things like fire roads. Is there a danger to riding without the rear fender / chain guard? Do components wear out more?
@StreetRodAZ Жыл бұрын
Technically no. But the underside of your bike is going to get pretty dirty. And if you ever put a tail tidy on, you'll get water and mud up in there. Really up to you. The chain guard is more of a safety measure to prevent stuff like clothing from getting caught in the sprockets. Again... totally up to you if you wanna roll without it.
@dopeytripod Жыл бұрын
if only the media mod was water proof
@eamonn104 Жыл бұрын
hi, can you tell me where I can order this eliminator? searching the internet, without success. Any information would be greatly appreciated, thanks.
@StreetRodAZ Жыл бұрын
tuffside.com/products/harley-street-rod-fender-eliminator-bracket looks like they’re out of stock right now.
@tlalexander3 Жыл бұрын
They help some but sadly the engine cover can still touch the ground... I've only had my XSR for two days and I dropped it today in a tight turn. I was barely even moving and didn't get good footing when it started to tip and it went on over. It ended up scratching the bottom of my engine cover on the left side.
@sergiaow Жыл бұрын
Hi mate, great video! any chance you can tell where did you get the spreadsheet with the screws tighten pressure from? Thank you.
@StreetRodAZ Жыл бұрын
Yep. Here yah go. docs.google.com/document/d/1lTn705T13gHp3FvU4yNeDFdo-XNhOq9PdK6N6liUHzk/edit
@magnusbain3081 Жыл бұрын
Cool may do the same , I hated my mirrors upright so inverted them .
@rb73moto Жыл бұрын
Great job bro looks cool
@StreetRodAZ Жыл бұрын
Thx. Cheers
@mprbusiness Жыл бұрын
How much oil #20 oil total ? Do you need two pints or just one ?
@StreetRodAZ Жыл бұрын
You're going to want to buy 2 bottles, but you wont use it all. What you want to do is pour out the old oil from each individual fork into a measuring cup, so you know exactly how much oil to put back in each fork.
@TheeBlueSkyMedia Жыл бұрын
I know I’m 3 years late , did you find that you needed to tilt the camera more back so it’s pointing more upward since our helmets are at a downward tilt? To make sure it’s not just recording too much handlebar/dash? Or was this set up; mounted close to helmet , okay ?
@StreetRodAZ Жыл бұрын
I used a J connector from GoPro to move the camera more forward, away from the helmet. That way you can tilt it back further.
@timadams3703 Жыл бұрын
Fire video, this video definitely came clutch 💯
@StreetRodAZ Жыл бұрын
glad it still works after a few years. 👍
@gregsanford3848 Жыл бұрын
I'm in Philippines province, fitted kelpie shorty,no db killer,on my xsr700, now the pups are suck n
@Killer12340000 Жыл бұрын
I’m trying to remove my shock but the bolt is very tight. Is there a way where I can Jack it up where it won’t be as tight?
@StreetRodAZ Жыл бұрын
Yes.You can get a small bike lift on Amazon or Aliexpress for an affordable price
@bigl3985 Жыл бұрын
All i have to say is your a f***in legend! thanks so much, just used this strat to fix bogging on a 21 Sportster, worked like a charm!!! Ride on brother!
@StreetRodAZ Жыл бұрын
Right on brother! Glad it helped you out. Ride safe and thanks for the props.
@TheSantyArg Жыл бұрын
Great Job Man! whats your opinion about adding a FP3 to the XG750? I have a XG750 and I´m thinking in installing a FP3 on it as I´ve installed a KN filter. Thanks!
@StreetRodAZ Жыл бұрын
They’re all very lean when they’re stock. They need about 8 to 10% more fuel depending on where you live the FP3 can only help. Get a high flow air filter as well. You’ll notice a huge difference in performance.
@TheSantyArg Жыл бұрын
@@StreetRodAZ Thanks for your answer!! Should I buy the 66005 FP3 for my xg750? Regards!
@StreetRodAZ Жыл бұрын
@Santiago González. You might as well buy the FP4. It’s newer and does a bit more. Here’s a link to the one for the XG750 on Revzilla.com. bit.ly/3GyuuVt
@TheSantyArg Жыл бұрын
@@StreetRodAZ Thanks for all your answers!!.. I´ve found a fp3 at a good price.. that´s why I was thinking in this. Regards!
@IN_ZANE_ Жыл бұрын
Nice video, when you order this kit do you need to choose springs based on weight or it just is what it is?
@StreetRodAZ Жыл бұрын
Just straight up kit. You adjust sag post install using the preload adjusters.
@IN_ZANE_ Жыл бұрын
@@StreetRodAZ 🤘
@gregsanford3848 Жыл бұрын
always enjoy your videos
@gregsanford3848 Жыл бұрын
enjoy your videos ssso much ya on it,SMASH DA GAS ,FULL NOISE SMOKED OUT
@adjbob56 Жыл бұрын
For all that work I would have installed a cartridge kit such as Ohlins FKS 204 Street NIX 22 Cartridge Kit, or a emulator (gold valve by Racetech or similar).
@StreetRodAZ Жыл бұрын
complete overkill for this bike but hey…. be sure to post a video so we can see it. ride safe
@gregsanford3848 Жыл бұрын
I'm from Australia, now in phillipines, the traffic can be insane,in the provinces, dogs goats çhickens, just lay on the road,you have to dodge the dog poo,,in the towns,I see stacks every day ,so suit up mate and stay alert,you can relax when your on the hiway
@Stick_jitsudad808 Жыл бұрын
I love it
@gregsanford3848 Жыл бұрын
I really enjoy your videos, very well done thank you mate very helpfull
@gregsanford3848 Жыл бұрын
nice job mate cheers
@gregsanford3848 Жыл бұрын
loud speaker,HEY YOU WHAT YA DOING OVER THERE
@bishalbiswas6828 Жыл бұрын
Hello sir i followed the you did but i have issues with lots of unnecessary pops & cracks wind blast noise and voice break. What to do should use big dead cat to Cover inner mic of helmet
Пікірлер
kid took the show :)
…now you have to delete the original turn indicators, they seem too big…
I got rid of the Tuffside and switched to New Rage Cycles. Watch my other video. kzread.info/dash/bejne/fneMu7tvY8jbeZs.html
what do u mean "got them back", u never had them to start with, dont even have them from factory
2020 has front running lights dude.
Love it!
Thank you for all the information on the street rod, not even harley davidson knows anything about them in 2024
I have used epoxy mastic to get the needed shape of the mount for my helmet and than attached the mount to the helmet with two component epoxy glue. Now it is there for good! 👍 😁 It was my intention to attach it once and forever anyway, so why would I even think of using self adhesive?😎 For the rest, - this is a very good way out for people with difficult helmets 👍
Sounds sick love it... take it out on a ride..
Hi, your video is very thorough, and you worked exactly as I would have. The link you provided for the light bulb is no longer good. Can you please direct me to another H4 bulb where I can separate the housing piece, or do all of them do that?
Thanks for this video! it REALLY helped during install on mine. The downloadable instructions aren't that great. Thumbs up from UK 👍
Glad it was helpful. It was one of my first vids and looking back in it... pretty rookie compared to my newer ones. Ride safe.
The instructions from the website say you dont need that metal bracket, tail light only bolts back in using the 2 8mm bolts.
This video was made 6 years ago for the first generation tail tidys. Things have changed since then.
Is the FSK108 complete set I need? Or do I need to buy springs seperately?
complete set. springs and spacers.
@@StreetRodAZThanks. Which one you think is better FSK108 or YSS Upgrade Kit? They are about the same price, but YSS have some kind of valve emulator?
You can never go wrong with Ohlins, but YSS makes good stuff too. Never personally bought YSS but they have a great rep. Based on my experience, I would go Ohlins.
ciaoscusami ti scrivo da italia, il manubrio che hai montato ha il filetto x i contrappesi originali? grazie.
No. Dovrai acquistarne di nuovi
@@StreetRodAZ grazie
does the handlebar hits the fuel tank?
No
I own the same bike and had great adventures in the Swiss alps on it
Just now realized I don’t need to do the license plate delete since this deletes it. Might as well just get the axel plate holder
check out my other video on fabricating a license plate bracket for this tail tidy. It's super easy and super inexpensive
Nice is such a nice mod, planning on doing on my XSR700 too :)
Excellent video. Very informative. 👍
Great fun bike, have one as a daily, heaps of mods to make it go well, tuned with Screaming Eagle tuner and leads, hi flow S&S air cleaner, Vance and Hines pipe.👍
Do you still have the same LED headlight bulb from Superbright installed in your XSR700, the link isn't working so I was wondering which one it is. does it have the fog light version.
Try this one... www.superbrightleds.com/catalog/product/view/id/199788/category/2/?find=2019-yamaha-xsr700-high-beam-and-low-beam-headlight-bulb-base-4960537
That's the bulb.
Thanks much, just wanted to make sure I was getting the one you installed@@StreetRodAZ
got it, did you add the resister kit to it, or was it not necessary @@StreetRodAZ
Do these headlights work on a 2017 xsr700? Ive tried a vrand that assured me it would fit but the headsyncs get in the way of the clamp
Yes.
Hey there! Just wondering if you have updated your mapping since posting this video? I have a 2022 XSR700 with a Two Brother's Exhaust and a performance air filter system very similar to what you have. unfortunately, power commander doesn't have anything but a base tune for my bike right now. I was hoping I could see your map as a good place to start my tune from.
I got rid of the Power Commander about 2 years ago. Went with an ECU flash using Dynojet Power Vision 3. Waaaaay better. But I can see if I still have the map.
Hit me on Instagram so I can mesaage you if I have it.
People liked it so much it comes stock on the 700 now lol
is it very slippery?
Nope. But Corbin has discontinued the solo seat for the XSR700.
ciao amico mio,io lo montato come te,ma si è piegato e rotto dove ce luce targa,forse le vibrazioni,ho messo 2 piastre di rinforzo,
Do you not have to tune it or flash the ecu?
you do not. now if you also change your air filter, I highly recommend you do flash your ECU, or get a power commander. check out my other videos on ECU tuning .
@@StreetRodAZ any chance we could get a video of it with the DB killer out?
@@GarzaLovesYou what DB killer? lol
Great video thanks for posting it
Hey thanks for showing this rear mud guard. I'm actually thinking of just keeping the rear fender / chain guard off. Just leaving it without any guard. I love the clean naked look next to the shock. I live in Portugal and never ride in rain, but do sometimes go on things like fire roads. Is there a danger to riding without the rear fender / chain guard? Do components wear out more?
Technically no. But the underside of your bike is going to get pretty dirty. And if you ever put a tail tidy on, you'll get water and mud up in there. Really up to you. The chain guard is more of a safety measure to prevent stuff like clothing from getting caught in the sprockets. Again... totally up to you if you wanna roll without it.
if only the media mod was water proof
hi, can you tell me where I can order this eliminator? searching the internet, without success. Any information would be greatly appreciated, thanks.
tuffside.com/products/harley-street-rod-fender-eliminator-bracket looks like they’re out of stock right now.
They help some but sadly the engine cover can still touch the ground... I've only had my XSR for two days and I dropped it today in a tight turn. I was barely even moving and didn't get good footing when it started to tip and it went on over. It ended up scratching the bottom of my engine cover on the left side.
Hi mate, great video! any chance you can tell where did you get the spreadsheet with the screws tighten pressure from? Thank you.
Yep. Here yah go. docs.google.com/document/d/1lTn705T13gHp3FvU4yNeDFdo-XNhOq9PdK6N6liUHzk/edit
Cool may do the same , I hated my mirrors upright so inverted them .
Great job bro looks cool
Thx. Cheers
How much oil #20 oil total ? Do you need two pints or just one ?
You're going to want to buy 2 bottles, but you wont use it all. What you want to do is pour out the old oil from each individual fork into a measuring cup, so you know exactly how much oil to put back in each fork.
I know I’m 3 years late , did you find that you needed to tilt the camera more back so it’s pointing more upward since our helmets are at a downward tilt? To make sure it’s not just recording too much handlebar/dash? Or was this set up; mounted close to helmet , okay ?
I used a J connector from GoPro to move the camera more forward, away from the helmet. That way you can tilt it back further.
Fire video, this video definitely came clutch 💯
glad it still works after a few years. 👍
I'm in Philippines province, fitted kelpie shorty,no db killer,on my xsr700, now the pups are suck n
I’m trying to remove my shock but the bolt is very tight. Is there a way where I can Jack it up where it won’t be as tight?
Yes.You can get a small bike lift on Amazon or Aliexpress for an affordable price
All i have to say is your a f***in legend! thanks so much, just used this strat to fix bogging on a 21 Sportster, worked like a charm!!! Ride on brother!
Right on brother! Glad it helped you out. Ride safe and thanks for the props.
Great Job Man! whats your opinion about adding a FP3 to the XG750? I have a XG750 and I´m thinking in installing a FP3 on it as I´ve installed a KN filter. Thanks!
They’re all very lean when they’re stock. They need about 8 to 10% more fuel depending on where you live the FP3 can only help. Get a high flow air filter as well. You’ll notice a huge difference in performance.
@@StreetRodAZ Thanks for your answer!! Should I buy the 66005 FP3 for my xg750? Regards!
@Santiago González. You might as well buy the FP4. It’s newer and does a bit more. Here’s a link to the one for the XG750 on Revzilla.com. bit.ly/3GyuuVt
@@StreetRodAZ Thanks for all your answers!!.. I´ve found a fp3 at a good price.. that´s why I was thinking in this. Regards!
Nice video, when you order this kit do you need to choose springs based on weight or it just is what it is?
Just straight up kit. You adjust sag post install using the preload adjusters.
@@StreetRodAZ 🤘
always enjoy your videos
enjoy your videos ssso much ya on it,SMASH DA GAS ,FULL NOISE SMOKED OUT
For all that work I would have installed a cartridge kit such as Ohlins FKS 204 Street NIX 22 Cartridge Kit, or a emulator (gold valve by Racetech or similar).
complete overkill for this bike but hey…. be sure to post a video so we can see it. ride safe
I'm from Australia, now in phillipines, the traffic can be insane,in the provinces, dogs goats çhickens, just lay on the road,you have to dodge the dog poo,,in the towns,I see stacks every day ,so suit up mate and stay alert,you can relax when your on the hiway
I love it
I really enjoy your videos, very well done thank you mate very helpfull
nice job mate cheers
loud speaker,HEY YOU WHAT YA DOING OVER THERE
Hello sir i followed the you did but i have issues with lots of unnecessary pops & cracks wind blast noise and voice break. What to do should use big dead cat to Cover inner mic of helmet