Пікірлер

• 
  @dmytroklopp69733 күн бұрын

  this was hilarious

• 
  @juancruz41793 күн бұрын

  Thanks for this good video.

• 
  @elcapitan85045 күн бұрын

  As someone who doesn't know anything about repairs, this video and the instructions are perfect. Helped me with my soap dispenser and answered every question i had. Thank you sir👍

• 
  @MOMDAD695 күн бұрын

  Can you pls confirm if duel fuel gas stove 30amp is the same except for outlet. Thank you Sir

• 
  @Lightcode5 күн бұрын

  That's super. But where are the missing socks

• 
  @rw76689 күн бұрын

  I already have Liquid Nail. Will that be adequate instead of thinset?

• 
  @Askmediy9 күн бұрын

  Not at all.

• 
  @rw76689 күн бұрын

  @@Askmediy thanks fir the feedback. I was not inclined to use the messy thin set technique but I trust your expertise.

• 
  @15DurangoRT10 күн бұрын

  You really should have painted on a asphalt bonding agent around the edges before you dumped the asphalt in the hole.

• 
  @MattFromWork16 күн бұрын

  it's July 21st, 2024, and I just cleaned out my dryer thanks to you. Good to know this information is still helping out people today.

• 
  @christroupe-pr9yt17 күн бұрын

  Im building my deck into a stucco house and ive been drilling throughout for the ledger and cant locate any wood what tentioners do i use

• 
  @Askmediy17 күн бұрын

  How old of a house? Is it all block?

• 
  @christroupe-pr9yt14 күн бұрын

  @Askmediy it's fairly new I guess it's just the particular location of the deck bc it's a multilevel. But I have a 14" bit that just keeps hitting concrete in between each joist. The inspector told me tentioners are necessary. Do I have to go inside?

• 
  @majinkakashi2018 күн бұрын

  Awesome video, thanks man

• 
  @Askmediy17 күн бұрын

  Thank you so mush

• 
  @henriquezhenry20 күн бұрын

  Thank you 🙏🏽 great video

• 
  @donnasaint765621 күн бұрын

  Here i go! Wish me 🤞

• 
  @gomezjew22 күн бұрын

  I’m in a renters property and I’m allowed to do modifications to the house as long as they’re done correctly so thank you very much because this is going to help me so much

• 
  @darrentaylor426223 күн бұрын

  You shouldn't be using NM-B cable inside conduit.

• 
  @DominickAmorosso23 күн бұрын

  What article and section in the code book?

• 
  @darrentaylor426222 күн бұрын

  @@DominickAmorosso The commen sense code book. THHN is cheaper, doesn't require as large of conduit, and is easier to pull.

• 
  @rickbourdier140823 күн бұрын

  Thanks. Who's the great band?

• 
  @406j627 күн бұрын

  Cam I ground to copper rod directly to a gas line

• 
  @Askmediy27 күн бұрын

  Not sure what you really mean?

• 
  @anthonymestayer798627 күн бұрын

  Awesome video 🎉🎉🎉

• 
  @wdousley28 күн бұрын

  excellent

• 
  @Jared_Albert28 күн бұрын

  Thank you

• 
  @anthonyhollick6205Ай бұрын

  Hey man, thanks for the info. Just put one in, i used my pressure washer to bore out the hole, and user my hammer drill, occasionally adding more water jetting. Was gonna say, you get one stuck, that might be a better option than the excavator. But cool non the less.

• 
  @RobertTrainor-q8wАй бұрын

  What if the Teflon-taped connections leak, there is no opportunity to re-make the connection?

• 
  @davidluu6288Ай бұрын

  Very helpful, thank you.

• 
  @TheRealMsMumbleBeeАй бұрын

  This was the perfect video. You helped me fix my drying 😂❤ apparently the previous owners of this bad boy never cleaned it. Guessing that's why they got rid of it lol

• 
  @laurak.2622Ай бұрын

  can’t see a dang thing!!

• 
  @TheDr1066Ай бұрын

  Great video man. Thank you for this. And you made it fun 👍🏼

• 
  @guns4freedomАй бұрын

  Ty sir. This helps greatly for a do it yourself home owner like myself. I appreciate it

• 
  @corythompson9523Ай бұрын

  I buy copper dust and dust the roof with it. I don't like the flashing sticking out. The dust impregnates the asphalt shingles and does same thing. Another point is asphalt shingles have a tack strip to keep them from lifting in wind. That copper flashing breaks that bond. Another thing is you don't have to lift established shingles trying to get a nail in and risk cracking the shingle. Dust is just better over all.

• 
  @VicToR_RiderАй бұрын

  Lol u nailed it with hearing a pop and the wife yelling fire😅 I messed up changing dryer plug. Mixed the black and white.

• 
  @dlwaterloo2221Ай бұрын

  Drill a 3/8 hole just before the nails or screws, use a jigsaw to cut across the board. It’s simple.

• 
  @christopherg465Ай бұрын

  Thank you Sir, I appreciate your video..I have to install a 240V 15amp for an window a/c . I'm using 14 Gauge wire. My question is this , my run is 50' is that still a proper gauge wire to use? Thank you.

• 
  @AskmediyАй бұрын

  Use #12

• 
  @amunkhufuАй бұрын

  My door hit on the side of the hinges when I try closing it. How to fix that?

• 
  @oriongeuse2 ай бұрын

  We had a three prong stove put in with clickers for the gas elements. Wondered why the clickers worked sporadically. Finally got rid of that stove and bought a new one that had a 4 wire plug. Read the install sheet and it stated 3 wire plug will not operate the clickers correctly. Now we know. Putting in a 4 wire. Luckily the plug goes straight down to the basement so the wire run will be easy.

• 
  @boardgamewoodsman83782 ай бұрын

  The one video that showed me exactly what I needed to see...how that wire slips through that acorn to the second ground. Thanks for your wisdom

• 
  @kiga17872 ай бұрын

  My home is 1940 as well. It's about 1300 square feet. About how much does this g house your doing going to cost im wondering.

• 
  @dandork202 ай бұрын

  Great video, thank you!

• 
  @johnswan91232 ай бұрын

  Good for level five.

• 
  @DJLIBERATORE72 ай бұрын

  Very well done, thank you. Your demonstration and explanation is the best I've seen. Thank you again!

• 
  @davidcase46002 ай бұрын

  Unsat, unsafe. If you use a metal box, ground it

• 
  @esmurphy94052 ай бұрын

  Thank you! Very informative and helpful. Unfortunately, the new dryers that stack don't have the lint doc's easily accessible from the back and you have to take the entire front off.

• 
  @kavya16382 ай бұрын

  gonna leak something here... your dryer doesn't need to be using 30 amps, in fact, just a few pico amps. the reason it draws so much is because it was designed this way (on purpose), ie, the electric company needs to make money somehow. all your electronics, really, are designed to operate in the high amp range. 15amp vacuum cleaner, blender motor, etc.. turns out, a little project that draws energy out of the air feeds a heating element in the "pico amp range" and gets just as hot as your dryer's heating element. thanks to a few advancements in this field, the electric company is guaranteed to go out of business. give it a few years..

• 
  @tomburt5905Ай бұрын

  Pico... Delicious

• 
  @thomaslavin58182 ай бұрын

  Best DIY wiring tutorial hands down

• 
  @DominickAmorosso2 ай бұрын

  Thanks buddy

• 
  @KeithDeley2 ай бұрын

  American shovel's 😂😂😂😂😂 what about the banding around the edges of the patch.

• 
  @briana3252 ай бұрын

  This is great. Looks so easy. Now I don’t have to have extension cords all over my garage. Thank you!

• 
  @shaunnewbedford7362 ай бұрын

  You would think you show a close up of the top of the water heater so it would be helpful forba reference

• 
  @woodstream61373 ай бұрын

  Probably calling an electrician. I need to run a ground to old 3 prong dryer outlet, thankfully its like a foot away from the breaker. My 30yr old speed queen finally finally died and I'm loathing having to buy a new budget machine.

• 
  @Yosoyreina2223 ай бұрын

  The heating element is glowing and I saw a spark inside. I cleaned out the vents I’m gonna try this. The dryer is very old I’m scared of it catching fire

• 
  @DominickAmorosso3 ай бұрын

  Sparks! Junk it and buy a new one asap

• 
  @nicholasmohr16193 ай бұрын

  Using this in 2024 on a Sony K-53HS10 from 2001.

• 
  @ElJeffe_3 ай бұрын

  It DOESNT matta!!! Great video. Thanks for posting.

• 
  @louismancuso4063 ай бұрын

  Man, your videos really helped me out alot. Kept coming back and watching like wait whats the next step. thanks for the help,. Louie

• 
  @mikehunter36673 ай бұрын

  You can really tell you like what you do, I respect that. Some people can be great at their craft and terrible at teaching it, you're not one of those guys.