Пікірлер

• 
  @1960jackrussell24 күн бұрын

  Where is part 2

• 
  @toodjackson44382 ай бұрын

  Meadow Green they use it on Chevy trucks paint code u 566f

• 
  @KB9TKB2 ай бұрын

  Too bad Lindberg didn't make a Wisconsin State Patrol or a Mass. State Police version of this kit. Cool kit, though I don't remember if black interiors were common in the Aero CVs, usually tan, blue or gray was more common in them.

• 
  @wedelacresdepottrains90602 ай бұрын

  These tanks were originally put out by members of the Santa Fe modelers group. They produced 3 heights of tanks. This is the shortest at 29ft. They were water tanks for steam locomotives. Some had spouts attached to the sides and others had underground pipes to water spouts on pipes sticking up from the ground .

• 
  @davidshiveley45083 ай бұрын

  Pronounced A-VON-TEE.....DUH!!!!!

• 
  @brucecroft92623 ай бұрын

  Just got mine, thanks for the review

• 
  @youknoweverything76434 ай бұрын

  I just built this l same kit about three months ago made it look like tim allens off of home improvement

• 
  @jeffhunt49925 ай бұрын

  how much

• 
  @jpswerve1825 ай бұрын

  some of these sell on eBay for $300

• 
  @SilencedRage5 ай бұрын

  Cheap and confusing. Garbage

• 
  @steveminla6 ай бұрын

  Good review of the kit but, there is way too much background noise.

• 
  @randalltravis297 ай бұрын

  My Dad 'Jim Travis' restored the Challenger 1, Put it in the museum. I built my model using the same paint that dad used. Would you be willing to sell me the MT figure ?

• 
  @wwiiinplastic47127 ай бұрын

  I bought the reissue that came after the one in the video less than a week ago at an Ollie's along with the 1971 Mach I kit from "Live And Let Die". And then this video shows up in my feed without me doing as single search on the car or the kit. Interesting. I guess my phone was spying on me while I was shopping.

• 
  @yooooo62969 ай бұрын

  This looks really cool, I'd convert it to an SLT package (chrome bumpers). All the stickers are nice and accurate. Would've been cool to see V8 Magnum badges for the front fenders (although this is a sport so V6 magnum badges would be more accurate). Exhaust should come out on the passenger side behind the rear tire. Grille and front bumper are accurate. They got most of the details right seems pretty decent.

• 
  @od14529 ай бұрын

  I didn't realize this Review was 10 years old. Can that be. ? It is well done and helps to document what these older kits had. I wish there were more like it. Thanks.

• 
  @od145210 ай бұрын

  I remember in the 60s and 70s Revell cars were usually billed as 1/24.. but some were 1/25. I think some were fudged into 1/25 but were really 1/24. I preferred the 1/24 particularly on smaller cars like 32s. I miss those old Revell kits , some were really good fot the time, like their 34 ford that you could build as stock , custom and Drag.

• 
  @user-zq1hm6mz6b11 ай бұрын

  Nice review we need more like this

• 
  @amandavanderford5502 Жыл бұрын

  Would love to find this kit

• 
  @ryangiles9568 Жыл бұрын

  It is a really good kit. I already built a years ago as a stock 1957 Chevy nomad wagon. My dad bought me another one from Ollie’s in Virginia, I’m building it as a street machine

• 
  @scaleautoguysworkbench Жыл бұрын

  Thanks for the heads up on this kit. I got it to build as a tribute to my late brother in law as he was a tow truck driver in Detroit. Now, I'm not sure if this is a fitting kit for that purpose. I guess that I could combine the GMC pickup with the plow with this kit and see what I can come up with.

• 
  @jacksoncolefitekarmel6281 Жыл бұрын

  What are the dimensions of this diorama? I am wanting to build one in 1:25 scale.

• 
  @uphobby Жыл бұрын

  Good review indeed. described what inside the box is very useful.

• 
  @Shorty_Lickens Жыл бұрын

  I bought several of these years ago. They no longer make them or sell them. They were great. Shame I cant get em any more.

• 
  @solarismoon3046 Жыл бұрын

  I don't know where you live but in my neck of the woods Hobby Lobby carried this until at least last year. I saw it sometime around Christmas. I got this same kit yesterday (5/6/2023) at Ollie's for $16.00 but the box was a little crushed. Otherwise it looks exactly like the one in this video. I was thinking about building a Nomad for a while as I did when I was a kid around 1985 or so. It was Midnight Blue with sparkles. If they moulded them in that colour today I would simply polish it or spray it with a clear coat. I loved that colour but I don't remember whatever happened to it. At any rate ---- I wanted to build this again but this time I want to make it a tribute the 1957 Chevy to the one that Jessica Alba was driving in "Sin City" with the Powder Blue colour. I don't know why they used to mould them in colour since they were usually painted but being a kid I didn't paint over the metallic bodies. I wish they would do that again but of course since Round 2 in South Bend doesn't care they're all made in CHINA now so all their models are white. Thank you for posting this but I wish that there was a final build video.

• 
  @TI4438 Жыл бұрын

  Just built this kit. Recently reissued and apparently NO improvements have been made. Some of the decals were useless. But at least we get the original box art, LOL!

• 
  @Dylanesque Жыл бұрын

  Crane's all wrong. Far too much overhang in the stowed position.

• 
  @pr3modeling239 Жыл бұрын

  Back in the day, that 70's Volare/Roadrunner front suspension swap was actually pretty popular. They were plentiful in the boneyards and offered lots of room to drop in whatever engine

• 
  @petesmodelcarcustoms584 Жыл бұрын

  Thanks for the review 👍it's a great help for making a decision to buy🤔👍it's a lot more detailed than I expected😃. Thanks for showing and best wishes from jolly old England 👍😎Pete 🤓

• 
  @maciejkaczor4574 Жыл бұрын

  Can i use that on dry surface painted acrylic xf ? Wiping this tamiya thinner will destroy old dry surface ?

• 
  @davidmcaninch4714 Жыл бұрын

  I got this kit from Hobby Lobby. I gotta say, I’m a little bit nervous about building it because I never made a model car before. I’m doing really well with it. I’m almost finished as a matter of fact.

• 
  @moparnut6286 Жыл бұрын

  Good little kit even better when you find the 2022 version at Ollie's for $12.99

• 
  @wilburross9709 Жыл бұрын

  I got one! Liked it so much after I opened it up, I went back and got another one! Always wanted to build the Little Deuce, glad they reissued it as this.

• 
  @blkft Жыл бұрын

  Same here, picked up several of them for builds and parts to kit bash. I already started one, lowered the suspension even more, de-chromed the rims, and replaced the motor with an Ardun flathead from the Revell 50 Ford.

• 
  @wilburross9709 Жыл бұрын

  @@blkft That sounds like an ambitious build! I just finished my first one of these, built it box-stock. Decided it would look like Robert Williams' roadster if I painted it primer red. It looks pretty good, was a fairly simple build. Cussed how they did the taillights a little. Got the '55 Bel Air (latest Badman reissue) and the '57 Nomad (both Monogram), so the next one might get fuel injection or even a supercharger.

• 
  @blkft Жыл бұрын

  @@wilburross9709 That sounds sweet! I'm kinda stalled on it right now, been messing with other hobbies. I'll get back on it pretty soon.

• 
  @blkft Жыл бұрын

  My local Ollie's still has a few of these on the shelf. I really like the included Steelie rims with the optional dog Ford logo'd caps. They might look good on the Revell 53 Ford P'up or a un-Foosed FD1.

• 
  @modelcar1589 Жыл бұрын

  I'm going to start me one 👍🏿

• 
  @iakonaliwai6433 Жыл бұрын

  Mine says 1:72...do you know if they make a tank that would work for this? I have the: Airfix A02301 1:72 Scammel Tank Transporter Plastic Model Kit

• 
  @kellysnipe9586 Жыл бұрын

  Back in the 1950's rescue squads and ambulances were two different things. Rescue squads were tool trucks attached to the fire department. Ambulances were sometimes attached to the F.D. or were independent volunteer-operated or attached to hospitals. But today it's different because when you say "rescue squad" everyone thinks of the big box-shaped ambulances that seem to be everywhere. But they are not tool trucks. The meaning of the term has changed......Also I think they should have included "Civil Defense" decals because back then during the Cold War CD also operated ambulance vans such as this one, usually painted in the federal colors of blue and white.

• 
  @timcarson8146 Жыл бұрын

  Resurrecting the thread - just found this video. Great review!

• 
  @terrybaptist795 Жыл бұрын

  I was thinking about using body of this 85 camaro model Z/28 and building the nascar International race of champions race instead what do you think?🤔

• 
  @PiperStart Жыл бұрын

  I'm in the middle of making this model, and the modeller's note page is useful. The reason for this is down to the need to stop construction every now and again, in order to paint.

• 
  @jeniferallan6693 Жыл бұрын

  I am currently a 3rd of the way through. Its enjoyable but I found the exhaust parts very tricky.

• 
  @allenlenz9412 Жыл бұрын

  This looks like an excellent kit for the beginner and the experienced modeler. One thing I remember that was a complaint when it came out was that the the back end was said to be too short. It would be interesting for somebody to compare it to the monogram kit

• 
  @SITRUUNAKAKKU-pl3jj Жыл бұрын

  I WISHD ID HAD THIS AS SCALEMODEL/REALCAR

• 
  @SITRUUNAKAKKU-pl3jj Жыл бұрын

  I WISHD ID HAD SCALEMODEL

• 
  @kregskorner8851 Жыл бұрын

  Nice Review, looks like a good kit to get!

• 
  @richardhooper839 Жыл бұрын

  Add a 3wheel forklift. The lift goes into the back of the bed. I drove one delivering landscape materials RCH(leftcoastclub)

• 
  @vintagesurvivor Жыл бұрын

  A-VON-ti...it's Italian for " Forward".

• 
  @davidsum16 Жыл бұрын

  Nobody cares about a review of shelves. It's shelves, not rocket science. Now please show us how to set up the bottom shelf. That's like some rocket science level shit right there!

• 
  @dvdw_graphics_crafts Жыл бұрын

  Seeing your collections gave me a nostalgia of when I lived in Houston and Las Vegas, building mostly Revell and AMT kits. X')

• 
  @dankydiecast5686 Жыл бұрын

  I’ve been collecting Hotwheels for over 40 years. You might be able to squeeze $3.00 apiece out of those cars you have at a flea market. If you still have them.

• 
  @kregskorner8851 Жыл бұрын

  Sub your channel, cool to see others with multiple modeling ventures with railroading and model cars!

• 
  @OPS_GUY2023 Жыл бұрын

  Are the containers made to where they can fit on the chassis if you were to purchase them?

• 
  @jonflanagin6682 Жыл бұрын

  Hate the car love the trailer