Thanks for the video! Was hoping for a parts list for the setup you used…
@rarmstrong72 ай бұрын
Just want to thank you guys for saving my life, or at least minimizing frustration! Your videos are great and MUCH appreciated. Thank you.
@Hamassucks1936 ай бұрын
Hello and thanks for the info. I have a Sea Ray 36' Sedan Bridge with issues. Do you make a system for the 36?
@xxxSham1nxx9 ай бұрын
Police?
@juanceballos842311 ай бұрын
Hello, Why is this better that conecting directly the blowers directly ? THKS
@edemerick1889 Жыл бұрын
Anybody thinking of utilizing this system should definitely do it. This system doesn’t just replace the old one but it’s the system that Sea Ray should have originally used. FP is a great company to deal with and their product is a very easy install if your even slightly handy with tools and can follow instructions. I have a 2002 300 Sundance. I’m on my third season with this product and it’s foolproof.
@FPmarine Жыл бұрын
Wow, thank you Ed! We have just made the decision to offer a limited Lifetime Warranty on our EIM Replacement Systems. Please let us know if you ever have an issue.
@Andrico77 Жыл бұрын
I wonder if you could just use a Router and thicker stock instead of the backer for flushing mounting.
@edemerick1889 Жыл бұрын
Anybody thinking about this replacement option should think no more! I have a 2002 300 Sundance and this install is easy and is much better than original. This is what Sea Ray should have done from the beginning
@johnwhite9988 Жыл бұрын
Do you sell these?
@edwardlanegraff54232 жыл бұрын
Why do they still use these, they have been going bad for over 60 years on Ford model cars and trucks. Why hasn't someone come out with a digital one. Thousands of people with motorhomes have these go out every year
@MajorTendonitis2 жыл бұрын
I have a 0741R carling switch in a bucket truck that activates the boom. For the life of me I cannot find a wiring diagram to get a replacement . I believe it’s a double throw double pole
@neill.m.herbert2 жыл бұрын
Mine was stuck on the "battery connected" side and another video said cleaning and lubricating inside the housing would help. After I did that and put it back together, it got stuck on the "disconnect" side. What gives?
@markstraub50152 жыл бұрын
Great video- thanks!
@cassmarkonthemove2 жыл бұрын
Hi, is it possible to modify the newer Mobella latches? any luck trying? thanks!!!
@FPmarine2 жыл бұрын
No they changed the casing so that you cannot take it apart and remove the springbolt. You would really have to bend, pry, and destroy the casing to get it all apart. We keep all of the configurations in stock. www.fpmarine.com
@cassmarkonthemove2 жыл бұрын
@@FPmarine thank you!
@chriscarter9743 жыл бұрын
Nice guys, do you have any info on installing this system on a 340 Sundancer
@joshmcalexander62093 жыл бұрын
Hey! Roll your sleeves up buddy!
@joshmcalexander62093 жыл бұрын
Joking! Great video and very informative man! Solid work!
@ericdee68023 жыл бұрын
What if the relay constantly blows the 5amp fuse??? Does that indicate the latching relay is no good????
@toobglued3 жыл бұрын
Im a marine electrician by trade and have gone to two service calls for these little guys, one last year and one this season. one was so bad it smoked and melted. both were sea-ray. interesting way to back light. before the times of led.
@FPmarine3 жыл бұрын
Some of the smaller inverters that were used in the past would get overloaded. Electroluminescent strips give a smooth even glow rather than the hotspots created by LED. Sometimes you see this type of system used with spaghetti type string lights. LED's through a tube can work also to evenly disperse the light
@joshjones98783 жыл бұрын
Brilliant - help me a ton - thanks
@bevtecdiving68533 жыл бұрын
Thank you very useful
@mikesch00004 жыл бұрын
Very clear and helpful, thanks!
@TBevins4 жыл бұрын
I'm so glad I found these videos!!!!!!! Thank you so so much !
@J-Gx5 жыл бұрын
Just what i needed. Thanks!
@opticalinch6 жыл бұрын
At the end you said up just the bow light comes on and earlier you said anchor an bow come on
@jerryharrell12315 жыл бұрын
That is true. After you hookup all the wires like he shows. Worked just fine for me.
@alzathoth6 жыл бұрын
are the LED bulbs difficult to change or swap out? is this something i can do at home? thank you
@billyloomis50816 жыл бұрын
Error at 1:08 I thought the brass jumper was position 2 and 5, you say 2 and 4
@HowlingPrecision7 жыл бұрын
had a question i have the 8 pin as of right now the power wire is going into 2 and being jumped to 8 my ground is going to 7 and my accessory is going to 3 but the light stays on no matter what position the switch is in how do i get it to shut off
@damodoesall62407 жыл бұрын
How do you get the switch out of the panel mount?
@warpath67177 жыл бұрын
The switiches typically have wings on the back that you squeeze while wiggling the switch out of the panel.
@sharxbyte8 жыл бұрын
Thanks for this. I have trouble keeping my writing straight unless I can understand exactly how it works. now I know!
@trentmyers5388 жыл бұрын
I have a DPst toggle and I need to wire it correctly I have wiring from a large motor to the switch and from the switch to the power source How do I wire it correctly.?
@itolond8 жыл бұрын
thanks for the video, great work. Excuse my lack of understanding and please correct me where i maybe wrong: on-off-off setup is a DPDT carling switch? on-off is a SPST carling switch ? is there such a on(momentary)- off- on (normal) type of switch and all of these 'can come with' independent light options (LED?)
@itolond9 жыл бұрын
I am looking for a 3 way Carling rocker switch, to control lights, is there a rocker switch which has different illumination colours based on selected? An example would red (1) Green (3) and Blue (2) - Blue = illuminated to locate switch in dark (et normal position)
@1grinnbareit9 жыл бұрын
Hi, I hope this isn't too dumb of a question! But I have a Carling VLDA switch, I'm in need of a new switch, but all I can find are VLDA-2, 3 & 4. What's the difference? The switch I have VLDA has no 2 or 3 after the VLDA. I believe this switch is a on/off/on, it's an 8 post, one lamp! Can you help clarify if I have to stay with a VLDA or will the VLDA-2 work as well?
@LubaLuba110 жыл бұрын
can I use a 2 pole contactor switch for a single pole contactor switch by using one of the poles?
@kylejohnson77910 жыл бұрын
What's the model of the Nav light switch?
@miagiovannirios166510 жыл бұрын
hola... yo se como funciona todo el swith... el que mostraste en el video 1 es in sw polo simple.. con contacto en terminales 1 y 2 polo simple prendido-apagado y con un circuito de lampara dependiente incandescente creo de 24 vl...es dependiente pork porque por lo que veo lleva una terminal contacto-lampara que enciende dependiente conel cuircuito de contacto...... sw 20a 12vl de corriente
Пікірлер
You’re the Man Ken!
Thanks for the video! Was hoping for a parts list for the setup you used…
Just want to thank you guys for saving my life, or at least minimizing frustration! Your videos are great and MUCH appreciated. Thank you.
Hello and thanks for the info. I have a Sea Ray 36' Sedan Bridge with issues. Do you make a system for the 36?
Police?
Hello, Why is this better that conecting directly the blowers directly ? THKS
Anybody thinking of utilizing this system should definitely do it. This system doesn’t just replace the old one but it’s the system that Sea Ray should have originally used. FP is a great company to deal with and their product is a very easy install if your even slightly handy with tools and can follow instructions. I have a 2002 300 Sundance. I’m on my third season with this product and it’s foolproof.
Wow, thank you Ed! We have just made the decision to offer a limited Lifetime Warranty on our EIM Replacement Systems. Please let us know if you ever have an issue.
I wonder if you could just use a Router and thicker stock instead of the backer for flushing mounting.
Anybody thinking about this replacement option should think no more! I have a 2002 300 Sundance and this install is easy and is much better than original. This is what Sea Ray should have done from the beginning
Do you sell these?
Why do they still use these, they have been going bad for over 60 years on Ford model cars and trucks. Why hasn't someone come out with a digital one. Thousands of people with motorhomes have these go out every year
I have a 0741R carling switch in a bucket truck that activates the boom. For the life of me I cannot find a wiring diagram to get a replacement . I believe it’s a double throw double pole
Mine was stuck on the "battery connected" side and another video said cleaning and lubricating inside the housing would help. After I did that and put it back together, it got stuck on the "disconnect" side. What gives?
Great video- thanks!
Hi, is it possible to modify the newer Mobella latches? any luck trying? thanks!!!
No they changed the casing so that you cannot take it apart and remove the springbolt. You would really have to bend, pry, and destroy the casing to get it all apart. We keep all of the configurations in stock. www.fpmarine.com
@@FPmarine thank you!
Nice guys, do you have any info on installing this system on a 340 Sundancer
Hey! Roll your sleeves up buddy!
Joking! Great video and very informative man! Solid work!
What if the relay constantly blows the 5amp fuse??? Does that indicate the latching relay is no good????
Im a marine electrician by trade and have gone to two service calls for these little guys, one last year and one this season. one was so bad it smoked and melted. both were sea-ray. interesting way to back light. before the times of led.
Some of the smaller inverters that were used in the past would get overloaded. Electroluminescent strips give a smooth even glow rather than the hotspots created by LED. Sometimes you see this type of system used with spaghetti type string lights. LED's through a tube can work also to evenly disperse the light
Brilliant - help me a ton - thanks
Thank you very useful
Very clear and helpful, thanks!
I'm so glad I found these videos!!!!!!! Thank you so so much !
Just what i needed. Thanks!
At the end you said up just the bow light comes on and earlier you said anchor an bow come on
That is true. After you hookup all the wires like he shows. Worked just fine for me.
are the LED bulbs difficult to change or swap out? is this something i can do at home? thank you
Error at 1:08 I thought the brass jumper was position 2 and 5, you say 2 and 4
had a question i have the 8 pin as of right now the power wire is going into 2 and being jumped to 8 my ground is going to 7 and my accessory is going to 3 but the light stays on no matter what position the switch is in how do i get it to shut off
How do you get the switch out of the panel mount?
The switiches typically have wings on the back that you squeeze while wiggling the switch out of the panel.
Thanks for this. I have trouble keeping my writing straight unless I can understand exactly how it works. now I know!
I have a DPst toggle and I need to wire it correctly I have wiring from a large motor to the switch and from the switch to the power source How do I wire it correctly.?
thanks for the video, great work. Excuse my lack of understanding and please correct me where i maybe wrong: on-off-off setup is a DPDT carling switch? on-off is a SPST carling switch ? is there such a on(momentary)- off- on (normal) type of switch and all of these 'can come with' independent light options (LED?)
I am looking for a 3 way Carling rocker switch, to control lights, is there a rocker switch which has different illumination colours based on selected? An example would red (1) Green (3) and Blue (2) - Blue = illuminated to locate switch in dark (et normal position)
Hi, I hope this isn't too dumb of a question! But I have a Carling VLDA switch, I'm in need of a new switch, but all I can find are VLDA-2, 3 & 4. What's the difference? The switch I have VLDA has no 2 or 3 after the VLDA. I believe this switch is a on/off/on, it's an 8 post, one lamp! Can you help clarify if I have to stay with a VLDA or will the VLDA-2 work as well?
can I use a 2 pole contactor switch for a single pole contactor switch by using one of the poles?
What's the model of the Nav light switch?
hola... yo se como funciona todo el swith... el que mostraste en el video 1 es in sw polo simple.. con contacto en terminales 1 y 2 polo simple prendido-apagado y con un circuito de lampara dependiente incandescente creo de 24 vl...es dependiente pork porque por lo que veo lleva una terminal contacto-lampara que enciende dependiente conel cuircuito de contacto...... sw 20a 12vl de corriente