Have you ever done a video on Traveling with your boat and trying to keep it safe? Or Trailer maintenance.
@skeeterboy77Күн бұрын
@@lightningmusky5286 I think I might have.. If not I might just have to make one!
@jimt56832 күн бұрын
I see you casting that reel so hard on a frog? that why I stop using Daiwa reels ever since my last purchase for ss sv 103.. Daiwa reel are so over break and bulky. but I wish I kept all 4 of the 103. it was so light just sucks on distance!
@skeeterboy772 күн бұрын
you think thats hard? Lol The TT frog is pretty "light" for the 736 so the rod doesnt load as easy.. Really easy to change the braking profile.. Just swap out the inductor spring..
@user-em1oq5bi5j2 күн бұрын
Froggy Style… 🐸 good stuff Trey
@skeeterboy772 күн бұрын
@@user-em1oq5bi5j the amount of algae bloom on this end was horrid.. it smelled so bad.. lol
@HellaBass4 күн бұрын
100 million of them???? Then share with your Boy!
@mikehauck58325 күн бұрын
Ist generations after you use them in practice. The frogs get softer.
@skeeterboy775 күн бұрын
@@mikehauck5832 for sure.. I also have kept them on the dash of the truck to soften them up or boil them.. Bit the first gens use a thicker material than the 2nds
@billcoerver45835 күн бұрын
Sweet looking frogs 💪
@slonefactor5 күн бұрын
I still like my Type R over the SV TW...what do you think?
@troycote45035 күн бұрын
I'm a minimalist these days. Down to the 14 rods 4 of those are Swimbait set ups. I throw big Swimbaits 85% of the time. I like Daiwa but I mostly have Shimano right now. I use my Curado 200ks more than anything in Massachusetts. I can throw 3+ ounce Swimbaits no problem. I love your pimped out Daiwas though!! You have an amazing collection bud! Im definitely a little jealous! 😂
@Bad_Agent018 күн бұрын
I have a 2015 Shimano metanium dc 100xg, can I swap the spool for finesse fishing?
@ianb480110 күн бұрын
What an awful video. All you can see is a head and shoulders and very little of the fishing reel.
@allen475811 күн бұрын
Do you have a website or contact number ? Im interested in having a tatula rebuild.
@bobbybass194414 күн бұрын
Great video, Trey. Do you think the 724 to light for fishing the stupid tube ? Or should I go with 725 ? Tight lines
@larrymor14 күн бұрын
My new bearings don't have orange seals. I think they are sealed and the bearings are ceramic, at least that's what I ordered but they seem too small to remove the seals.
@skeeterboy7714 күн бұрын
@@larrymor if you ever need bearings holler at me.. I keep Bocas in stock
@larrymor14 күн бұрын
@@skeeterboy77 Good to know but where are you?
@skeeterboy7711 күн бұрын
@@larrymor near st louis MO
@larrymor5 күн бұрын
@@skeeterboy77 There is a bearing at the base of the main crank on my Bantam SF. How is the easy way to replace that? I don't think there is....
@johnhelems72116 күн бұрын
I’ll wait another year should be able to get one for 72,000 fully loaded. They’re going to have to come back to reality in prices. You can get a 21, falcon for 72,000 at RMP.
@BrycemasterFishing17 күн бұрын
Dannnnnn!! Boy
@skeeterboy7717 күн бұрын
@@BrycemasterFishing got a bunch in
@mx4577419 күн бұрын
How much would the jdm steez A2 go for it?
@l0ranga21 күн бұрын
Thank you for the inspiration! What’s your thoughts on Cal Star Drag Grease? //Marcus
@skeeterboy7721 күн бұрын
@@l0ranga I use it only on drag washers if guys want a greased carbontex stack instead of dry..
@beegee313625 күн бұрын
I have A,B,D, and E series Coronarchs. To me, the 101D7's (and Core 101mg/metanium mg7) are hands down the best ever! They still hold their original value in mint condition, after all these years!
@raymondjohnson649626 күн бұрын
No no no not another one
@diversify21027 күн бұрын
I prefer the Sierra 682C for jerkbaits. I just do not like moderate action rods for jerkbaits, you just have to work the rod way to much to impart the action you want on the bait and it wears you out. I prefer a fast rod with a nice supple action and plenty of backbone about a third down the blank. Kaden blanks are stiffer than the Sierra blacks as well. No thank you. The Sierra 682C is the way I prefer to go for jerkbaits with a Dobyns rod
@raymondjohnson6496Ай бұрын
Will they fit the Calcutta bfs or the Calcutta 100 or daiwa zillon HD 1000
@skeeterboy77Ай бұрын
zill HD for sure. BFS it should as well since its pretty small.. 100 Not 100% sure, but it should since thats a pretty small reel as well..
@dickiehoskins9835Ай бұрын
Love the covers
@danspanosАй бұрын
You need to come up with a logo and slap that on the tag. Maybe a big TH or THF in a cool font with Trey Harpel Fishing below it in a small font.
@skeeterboy77Ай бұрын
@@danspanos yea I’m going to see if my company here can do something that’s cost effective..
@billcoerver4583Ай бұрын
Great covers for the price
@christianz-jg2bhАй бұрын
I bought lures that look like this. They just float and don't sink. Am i doing something wrong?
@tackleandtacosАй бұрын
This is too dope dude. I love this kinda stuff man
@mikehauck5832Ай бұрын
An amazing work of art. The detail someone put into making a tackle box. Is breathtaking 🎣☮️😎
@skeeterboy77Ай бұрын
its pretty awesome
@fishinmansamАй бұрын
I saw an old wiggle wart in there its an orange looking bait with the red lip 6 slots in from the left. They use those for steelhead trolling 🤙🏽
@skeeterboy77Ай бұрын
ill have to double look..
@danspanosАй бұрын
I've never seen anything it. Pretty amazing, Trey!
@skeeterboy77Ай бұрын
@@danspanos neither had I until it was given to me.. it’s pretty awesome
@michaelkessler6952Ай бұрын
Quick google shows it to be a Gilson tackle box, probably made by Charles L Smith as indicated by the tag on the inside of the box lid. Very cool piece of history there. Retro Bassin has done some videos with some of the people at the Florida antique fishing shows that would probably know all about the lures, and for sure that tackle box. Worth taking a look. He interviewd a guy that makes wooden boxes in that style to this day.
@skeeterboy77Ай бұрын
@@michaelkessler6952 oh awesome, I’ll have to look into it.. it’s a really cool box..
@billcoerver4583Ай бұрын
Very cool!
@traceywithers7278Ай бұрын
Beautiful box
@dennysheraka1655Ай бұрын
thats some really cool stuff
@mikestout9349Ай бұрын
What an incredible family treasure!!!
@slonefactorАй бұрын
Got my 794-795 and 806 dobyn rods all set with JDM shimano new Bantam reels....sweet swimbait rod set ups.
@skeeterboy77Ай бұрын
love the Bantam
@fate404Ай бұрын
the lexanis are pretty good for the price but unfortunately they do not last long, and the contis are a little crazy on price for a new set. i recommend surfing ebay and stocking up on what you think will best fit your budget. anything used over 8/32 should get the job done at a fraction of the price. cheers! anyways love your reel collection.
@skeeterboy77Ай бұрын
Yea we’ve had Contis and wasn’t impressed. Lexanis for the price have worked out well and these are such an “odd size” being 21” it’s harder to find tires. Achilles is another tire I’ve searched and can’t locate the correct ones.. no biggie.. Thanks!
@danspanosАй бұрын
I had my trumpet ready to play taps! 😁 I don't know if you have any experience with the 19 Steez CT SV TW, but I was hoping you could answer a question. I have the chance to buy one at a really good price. Pretty much the same price as an SS Air TW. Do you think the 19 Steez is still a decent reel in 2024, or would you just get the SS Air and throw some bearings in it to make it a 12+1?
@skeeterboy77Ай бұрын
Steez Ct is an awesome reel.. just depends what you are wanting to use either for..
@danspanosАй бұрын
@@skeeterboy77 I already have quite a few lighter BFS reels, so I would use the Steez CT for a little heavier baits for bass fishing. I know they have similar body shapes, but the spool is larger and heavier in the Steez so I would think it would be better suited to throwing baits that the smaller spools of the typical BFS reels couldn't handle. I'm just curious if the 2019 version is still relevant in 2024. It's a brand new reel, and it's half the price of a 2024 model if that makes a difference.
@skeeterboy77Ай бұрын
@@danspanos yea its def still relevant now.. Its such a smooth little power finesse reel.. Im looking at getting the 8.1.1 to fill a spot from another reel..
@catchofthedave8681Ай бұрын
Its almost double the price you can get it for in japan. Its all markup. My buddies wife is japanese and he lives over there now. Its ridiculous the markup on these reels and baits. This reel-You can get it for about $300 (i paid $280 for one) if you know how to read japanese, have a friend in japan, or buy from a japanese site. All the rest is markup and it only costs about $20 to ship it here and go through customs per reel. Its insane.
@skeeterboy77Ай бұрын
all reels sold in the US have a warranty so thats where a lot of the markup comes from as well.. Also pricing can vary with the exchange rate.. I own over 60+ "JDM" reels as Ive been buying from japan for 25 years.. I dont know when is the last time I bought a reel domestically as you can just get them cheaper over seas.
@DeDel-k2fАй бұрын
What is the sizes of the bearings?
@skeeterboy77Ай бұрын
3x10x4s.. Ive got some in stock if you need some..
@treecutter1169 күн бұрын
Will these fit the Curado 200HG dc was looking to change mine with either spool speed or the roca bearings but can’t find if they fit the dc reel thanks great job
@skeeterboy779 күн бұрын
@@treecutter116 yes will fit.. I’ve got Bocas in stock.. [email protected]
@treecutter1169 күн бұрын
@@skeeterboy77 this reel is brand new I’ve got a Lews tournament speed spool and it outcast the Shimano every time and seems smother casting to just wanting to know if it’s going to benefit changing in your opinion is it worth it
@skeeterboy779 күн бұрын
@@treecutter116 Ive done a bunch of DCs and the bearing upgrades open them up..
@pericoeldelospalotes3548Ай бұрын
Tienes rodamientos cerámicos?
@vansaukam799Ай бұрын
I owned that spool for a few years... absolutely the fastest and most incredible 36mm spool for Daiwa. The Megabass IP Honeycomb spool.
@vansaukam799Ай бұрын
Heavier gauge PVC is best, however it is heavier and more expensive to purchase and ship. Glad Dobyns took care of you.
@skeeterboy77Ай бұрын
The rod didn’t break during shipping..😂 It broke due to the trolling motor landing on it..🤦♂️
@jimt5683Ай бұрын
Gary still uses pvc tube, dobyns has the best warranty and customer service in the game !
@skeeterboy77Ай бұрын
@@jimt5683 this tube was straight from Dobyns.. They don’t use PVC, or havent in awhile unless you order a ton of rods that wont fit in the cardboard tubes. Rod broke from my screw up on deck.. no biggie..
@jimt5683Ай бұрын
@@skeeterboy77 maybe not in Texas but in Yuba I swear I received plenty of pvc tube bed anyways donuts ftw!
@danspanosАй бұрын
What size bearings would I need to buy for the worm shaft upgrade? Thanks, and great video!
@skeeterboy77Ай бұрын
4x7x2.5... Ive got some in stock if needed if you are in the US..
@michaelking66812 ай бұрын
Whatch out! The pin is tapered I fucked my reel up .
@skeeterboy772 ай бұрын
lol yes it is.. Abus have tapered pins as well..
@L_A_C_K_I_N_G2 ай бұрын
What do you mean you put ceramic coat on top of them? Are you referring to a Cerakote clear?
@zamo_curryfb62182 ай бұрын
What line weight do you use?
@skeeterboy772 ай бұрын
for what application?
@MrJNOTHUM2 ай бұрын
theres no bass in taneycomo...🤫
@stephen26342 ай бұрын
Why do u have to take it apart To begin with
@skeeterboy772 ай бұрын
Because all daiwas come dry from factory and guys want them upgraded Asap
@stephen26342 ай бұрын
@@skeeterboy77 Any specific reason why Daiwa does that ?
@skeeterboy772 ай бұрын
@@stephen2634 no clue as Ive talked to Daiwa japan directly at ICAST and the Classic about it.. its an in house factory deal..
@stephen26342 ай бұрын
@@skeeterboy77 Wow ! So it’s purposely done to save money ? Is that good for the reel ? I would say no
@stephen26342 ай бұрын
Can u use the P/F version as a long distance casting , I like the shallow spool
@skeeterboy772 ай бұрын
You answered your own question.. its a shallow spool so no it won’t be casting long distance unless you use lighter line..
@stephen26342 ай бұрын
@@skeeterboy77 If I put 30 lb Daiwa J Grand I could fit 75 yds. And empty out the spool ?
@skeeterboy772 ай бұрын
@@stephen2634 it will be less then 75yards since you NEED to put a mono backing on the reel first..
@stephen26342 ай бұрын
@@skeeterboy77 Ok 72 I mean I strictly fish jigs I don’t have a boat So distance for me is important. But if I cast beyond 60 Yards even with braid I would loose hook setting power I like shallow spools cause they eliminate Bird nests 90% or more on a long cast.
@stephen26342 ай бұрын
@@skeeterboy77 How much do you charge for that lubing You were doing ?
@GoldenHourFishing2 ай бұрын
Nice video mate. I just did this on my 22 Metanium shallow spool edition. Its worth noting that the retaining clip has been replaced with a rubber O ring, so the upgrade is less tedious on the 22 version.
Пікірлер
Have you ever done a video on Traveling with your boat and trying to keep it safe? Or Trailer maintenance.
@@lightningmusky5286 I think I might have.. If not I might just have to make one!
I see you casting that reel so hard on a frog? that why I stop using Daiwa reels ever since my last purchase for ss sv 103.. Daiwa reel are so over break and bulky. but I wish I kept all 4 of the 103. it was so light just sucks on distance!
you think thats hard? Lol The TT frog is pretty "light" for the 736 so the rod doesnt load as easy.. Really easy to change the braking profile.. Just swap out the inductor spring..
Froggy Style… 🐸 good stuff Trey
@@user-em1oq5bi5j the amount of algae bloom on this end was horrid.. it smelled so bad.. lol
100 million of them???? Then share with your Boy!
Ist generations after you use them in practice. The frogs get softer.
@@mikehauck5832 for sure.. I also have kept them on the dash of the truck to soften them up or boil them.. Bit the first gens use a thicker material than the 2nds
Sweet looking frogs 💪
I still like my Type R over the SV TW...what do you think?
I'm a minimalist these days. Down to the 14 rods 4 of those are Swimbait set ups. I throw big Swimbaits 85% of the time. I like Daiwa but I mostly have Shimano right now. I use my Curado 200ks more than anything in Massachusetts. I can throw 3+ ounce Swimbaits no problem. I love your pimped out Daiwas though!! You have an amazing collection bud! Im definitely a little jealous! 😂
I have a 2015 Shimano metanium dc 100xg, can I swap the spool for finesse fishing?
What an awful video. All you can see is a head and shoulders and very little of the fishing reel.
Do you have a website or contact number ? Im interested in having a tatula rebuild.
Great video, Trey. Do you think the 724 to light for fishing the stupid tube ? Or should I go with 725 ? Tight lines
My new bearings don't have orange seals. I think they are sealed and the bearings are ceramic, at least that's what I ordered but they seem too small to remove the seals.
@@larrymor if you ever need bearings holler at me.. I keep Bocas in stock
@@skeeterboy77 Good to know but where are you?
@@larrymor near st louis MO
@@skeeterboy77 There is a bearing at the base of the main crank on my Bantam SF. How is the easy way to replace that? I don't think there is....
I’ll wait another year should be able to get one for 72,000 fully loaded. They’re going to have to come back to reality in prices. You can get a 21, falcon for 72,000 at RMP.
Dannnnnn!! Boy
@@BrycemasterFishing got a bunch in
How much would the jdm steez A2 go for it?
Thank you for the inspiration! What’s your thoughts on Cal Star Drag Grease? //Marcus
@@l0ranga I use it only on drag washers if guys want a greased carbontex stack instead of dry..
I have A,B,D, and E series Coronarchs. To me, the 101D7's (and Core 101mg/metanium mg7) are hands down the best ever! They still hold their original value in mint condition, after all these years!
No no no not another one
I prefer the Sierra 682C for jerkbaits. I just do not like moderate action rods for jerkbaits, you just have to work the rod way to much to impart the action you want on the bait and it wears you out. I prefer a fast rod with a nice supple action and plenty of backbone about a third down the blank. Kaden blanks are stiffer than the Sierra blacks as well. No thank you. The Sierra 682C is the way I prefer to go for jerkbaits with a Dobyns rod
Will they fit the Calcutta bfs or the Calcutta 100 or daiwa zillon HD 1000
zill HD for sure. BFS it should as well since its pretty small.. 100 Not 100% sure, but it should since thats a pretty small reel as well..
Love the covers
You need to come up with a logo and slap that on the tag. Maybe a big TH or THF in a cool font with Trey Harpel Fishing below it in a small font.
@@danspanos yea I’m going to see if my company here can do something that’s cost effective..
Great covers for the price
I bought lures that look like this. They just float and don't sink. Am i doing something wrong?
This is too dope dude. I love this kinda stuff man
An amazing work of art. The detail someone put into making a tackle box. Is breathtaking 🎣☮️😎
its pretty awesome
I saw an old wiggle wart in there its an orange looking bait with the red lip 6 slots in from the left. They use those for steelhead trolling 🤙🏽
ill have to double look..
I've never seen anything it. Pretty amazing, Trey!
@@danspanos neither had I until it was given to me.. it’s pretty awesome
Quick google shows it to be a Gilson tackle box, probably made by Charles L Smith as indicated by the tag on the inside of the box lid. Very cool piece of history there. Retro Bassin has done some videos with some of the people at the Florida antique fishing shows that would probably know all about the lures, and for sure that tackle box. Worth taking a look. He interviewd a guy that makes wooden boxes in that style to this day.
@@michaelkessler6952 oh awesome, I’ll have to look into it.. it’s a really cool box..
Very cool!
Beautiful box
thats some really cool stuff
What an incredible family treasure!!!
Got my 794-795 and 806 dobyn rods all set with JDM shimano new Bantam reels....sweet swimbait rod set ups.
love the Bantam
the lexanis are pretty good for the price but unfortunately they do not last long, and the contis are a little crazy on price for a new set. i recommend surfing ebay and stocking up on what you think will best fit your budget. anything used over 8/32 should get the job done at a fraction of the price. cheers! anyways love your reel collection.
Yea we’ve had Contis and wasn’t impressed. Lexanis for the price have worked out well and these are such an “odd size” being 21” it’s harder to find tires. Achilles is another tire I’ve searched and can’t locate the correct ones.. no biggie.. Thanks!
I had my trumpet ready to play taps! 😁 I don't know if you have any experience with the 19 Steez CT SV TW, but I was hoping you could answer a question. I have the chance to buy one at a really good price. Pretty much the same price as an SS Air TW. Do you think the 19 Steez is still a decent reel in 2024, or would you just get the SS Air and throw some bearings in it to make it a 12+1?
Steez Ct is an awesome reel.. just depends what you are wanting to use either for..
@@skeeterboy77 I already have quite a few lighter BFS reels, so I would use the Steez CT for a little heavier baits for bass fishing. I know they have similar body shapes, but the spool is larger and heavier in the Steez so I would think it would be better suited to throwing baits that the smaller spools of the typical BFS reels couldn't handle. I'm just curious if the 2019 version is still relevant in 2024. It's a brand new reel, and it's half the price of a 2024 model if that makes a difference.
@@danspanos yea its def still relevant now.. Its such a smooth little power finesse reel.. Im looking at getting the 8.1.1 to fill a spot from another reel..
Its almost double the price you can get it for in japan. Its all markup. My buddies wife is japanese and he lives over there now. Its ridiculous the markup on these reels and baits. This reel-You can get it for about $300 (i paid $280 for one) if you know how to read japanese, have a friend in japan, or buy from a japanese site. All the rest is markup and it only costs about $20 to ship it here and go through customs per reel. Its insane.
all reels sold in the US have a warranty so thats where a lot of the markup comes from as well.. Also pricing can vary with the exchange rate.. I own over 60+ "JDM" reels as Ive been buying from japan for 25 years.. I dont know when is the last time I bought a reel domestically as you can just get them cheaper over seas.
What is the sizes of the bearings?
3x10x4s.. Ive got some in stock if you need some..
Will these fit the Curado 200HG dc was looking to change mine with either spool speed or the roca bearings but can’t find if they fit the dc reel thanks great job
@@treecutter116 yes will fit.. I’ve got Bocas in stock.. [email protected]
@@skeeterboy77 this reel is brand new I’ve got a Lews tournament speed spool and it outcast the Shimano every time and seems smother casting to just wanting to know if it’s going to benefit changing in your opinion is it worth it
@@treecutter116 Ive done a bunch of DCs and the bearing upgrades open them up..
Tienes rodamientos cerámicos?
I owned that spool for a few years... absolutely the fastest and most incredible 36mm spool for Daiwa. The Megabass IP Honeycomb spool.
Heavier gauge PVC is best, however it is heavier and more expensive to purchase and ship. Glad Dobyns took care of you.
The rod didn’t break during shipping..😂 It broke due to the trolling motor landing on it..🤦♂️
Gary still uses pvc tube, dobyns has the best warranty and customer service in the game !
@@jimt5683 this tube was straight from Dobyns.. They don’t use PVC, or havent in awhile unless you order a ton of rods that wont fit in the cardboard tubes. Rod broke from my screw up on deck.. no biggie..
@@skeeterboy77 maybe not in Texas but in Yuba I swear I received plenty of pvc tube bed anyways donuts ftw!
What size bearings would I need to buy for the worm shaft upgrade? Thanks, and great video!
4x7x2.5... Ive got some in stock if needed if you are in the US..
Whatch out! The pin is tapered I fucked my reel up .
lol yes it is.. Abus have tapered pins as well..
What do you mean you put ceramic coat on top of them? Are you referring to a Cerakote clear?
What line weight do you use?
for what application?
theres no bass in taneycomo...🤫
Why do u have to take it apart To begin with
Because all daiwas come dry from factory and guys want them upgraded Asap
@@skeeterboy77 Any specific reason why Daiwa does that ?
@@stephen2634 no clue as Ive talked to Daiwa japan directly at ICAST and the Classic about it.. its an in house factory deal..
@@skeeterboy77 Wow ! So it’s purposely done to save money ? Is that good for the reel ? I would say no
Can u use the P/F version as a long distance casting , I like the shallow spool
You answered your own question.. its a shallow spool so no it won’t be casting long distance unless you use lighter line..
@@skeeterboy77 If I put 30 lb Daiwa J Grand I could fit 75 yds. And empty out the spool ?
@@stephen2634 it will be less then 75yards since you NEED to put a mono backing on the reel first..
@@skeeterboy77 Ok 72 I mean I strictly fish jigs I don’t have a boat So distance for me is important. But if I cast beyond 60 Yards even with braid I would loose hook setting power I like shallow spools cause they eliminate Bird nests 90% or more on a long cast.
@@skeeterboy77 How much do you charge for that lubing You were doing ?
Nice video mate. I just did this on my 22 Metanium shallow spool edition. Its worth noting that the retaining clip has been replaced with a rubber O ring, so the upgrade is less tedious on the 22 version.