Пікірлер

• 
  @manujate2 ай бұрын

  Wish you have how to set it up clip :) Thank you for inspiration

• 
  @stageblastrecords3 ай бұрын

  Can you change banks? By clicking two buttons at once for example?

• 
  @albertomantoiu99013 ай бұрын

  Hi! I did the same thing, about Fake Morph and programmed as it has to be. The only problem is that if i press A wich is bank 1-1 on KPP, again A wich is 2-1 in KPP and after i press B for another preset like 1-2 with 2-2, if i wanna come back to 1-1 on A, it will be 2-1. The conclusion is that the switch A is not coming back as it was, like 1-1. What am i doin wrong? Any other PC or CC 😢messages?

• 
  @pitaorj3 ай бұрын

  I`m trying to send CC commands from the chocolate midi to the kemper, using the same port as you and I have no sucess. did you use some special setup to make the chocolate midi send midi over the usb c port???

• 
  @MusikOchProduktion3 ай бұрын

  Not at all. I just plugged in the usb cable and setup the settings in cube suite. Have you used my settings in the end of the video?

• 
  @pitaorj3 ай бұрын

  @@MusikOchProduktion It was a bad cable, I´ve tried a different one and it works like a charm. thank you for your help and keep the good work.

• 
  @therealsandeman4 ай бұрын

  Great info, thank you. What tool did you use to manage the controller?

• 
  @MusikOchProduktion4 ай бұрын

  Cubesuite. It´s the software that comes with the pedal

• 
  @Lil_Phag5 ай бұрын

  Ozzy osbourne från wish

• 
  @MusikOchProduktion4 ай бұрын

  😂😂

• 
  @DToneQuest5 ай бұрын

  i bought both of those footswitches when i preordered the player, how did you connect the dual switch to midi ipad control?

• 
  @MusikOchProduktion5 ай бұрын

  The footswitch for my iPad is connected to M-wave Chocolate with a standard jack cable. The chocolate is paired with my iPad through bluetooth 👍

• 
  @DToneQuest5 ай бұрын

  @@MusikOchProduktion nice

• 
  @user-zs9ex9lw1m5 ай бұрын

  Hi, tnx for video. Can you help pls, i cant find that. I will use A like Rig Prev, B like rig next, but i cant find needed CC commands.

• 
  @MusikOchProduktion5 ай бұрын

  Acctually, that seems like a tough one. I haven't figured that one out yet. Only banks up and down 🤔

• 
  @rogerthompson10115 ай бұрын

  ok I just got mine, ready to set up. I see you have the usb cable between the kemper and the m vave. Is this just for charging or does midi signal pass through the usb cable?

• 
  @MusikOchProduktion5 ай бұрын

  It does pass MIDI-signal also 👍

• 
  @docrock21995 ай бұрын

  I don't get it. How can I tell this controller that he should use the D-Switch to turn fx1 on/off?

• 
  @MusikOchProduktion5 ай бұрын

  I have not been able set the FX-hardware buttons to a CC-command. Only specific slots like in my video (the commands are in the end of the video) Here´s a thread where I try to solve there FX1/FX2-problem: www.kemper-amps.com/forum/thread/62706-midi-cc-command-to-turn-on-off-fx1-fx2/?postID=672436#post672436

• 
  @FelixWasWolf6 ай бұрын

  Genius! This solves a big problem for me, thanks for the Demo!

• 
  @isackvazquez10556 ай бұрын

  Could you leave me the link of exactly what I need to buy everything at once on Amazon 🙏🙏🙏🙏🙏

• 
  @MusikOchProduktion6 ай бұрын

  The products are in my description. Here's the MIDI-controller: www.amazon.se/-/en/Chocolate-Wireless-Controller-Rechargeable-Portable/dp/B0C4LNT18J

• 
  @guibollini61416 ай бұрын

  How did you connect&set the small switch to the mvave chocolate? Is it a TRS cable (stereo)?

• 
  @MusikOchProduktion6 ай бұрын

  Yes its supposed to be a TRS cable. But since only one switch button is programmable on M-vave I used a standard guitar patch cable (and removed the second switch I wasn't gonna use anyway)

• 
  @buddyslowhand76476 ай бұрын

  People want a Kemper player to have a small rig. But with all the additional stuff wich is needed, I'm better of with the Kemper stage that has all in one. Would have liked the player also, but too many limitations... it's not for me.

• 
  @MusikOchProduktion6 ай бұрын

  Yeah, I kind of agree. There sure are some limitations. For me mostly the lack of display 😏 But this rig is half the price of a Stage so I will try to work around the limitations 😅

• 
  @diecaverna6 ай бұрын

  The kemper stage is sucks! I had 3 and 2 of them came out defective, especially with the Tap Tempo switch! Delay and reverb freeze sometimes 🤦‍♂️😡! I’m not the only one! The best is the Head or Rack!

• 
  @MusikOchProduktion6 ай бұрын

  Oh man, that sucks @@diecaverna 🙁

• 
  @guitartoneSA5 ай бұрын

  @@diecaverna Nonsense.

• 
  @derbasti19876 ай бұрын

  Did you somehow manage to utilise "E" and "F". They are not assignable in the app. My actual idea is to set A-D for Rig 1-4 and E and F for Bank Up / Down. But I cannot assign E and F

• 
  @MusikOchProduktion6 ай бұрын

  No I did not 🤔 There seem to be a bit of false advertising regarding that function. There is some sort of ”group”-function but not in the mode we’re using. Google the manual or ”Cubesuite group E” or something to check it out 🤷‍♂️😅 forum.mod.audio/t/midi-chocolate-controller-with-the-mod-dwarf-an-introduction/7003

• 
  @derbasti19876 ай бұрын

  Ill do that. Thx - awesome idea. Glad I found your solution, its just awesome :)@@MusikOchProduktion

• 
  @marcelpacifico85336 ай бұрын

  I am switching banks with a longer "press and hold" on A (Bank Up) and B (Bank down). If that would be more comfortable for you too instead of pressing two buttons the same time :)

• 
  @MusikOchProduktion6 ай бұрын

  Yeah, I also do it similar. But I think wants a button combination more: A, B, C, D, and the two combinations more E and F when pressing to buttons at the same time.@@marcelpacifico8533

• 
  @ewanbyrne6 ай бұрын

  On the player can you setup that the effect button does like the same function for every rig? So say when you tap button 2, just a basic reverb comes on?

• 
  @MusikOchProduktion6 ай бұрын

  Yes, you can set that switch button 2 for example turns on FX slot 4 etc. globally so to say.

• 
  @mrcrowley736 ай бұрын

  I suppose you used mode C on mvave sending CC to kpp.Have you tried with PC in mode A?thx a lot

• 
  @MusikOchProduktion6 ай бұрын

  Yes, I´m sending CC-commands. It is supposed to work with PC too I think, but I've had no luck getting it to work 🤔

• 
  @marcelpacifico85336 ай бұрын

  Do you have the possibility to set the m-wave switches for the slots on the player? I need a solution to choose a slot directly, at least for Slot 1-4 (e.g. from Slot 1 directly to Slot 4) without going through slot 2 and 3. Thanks for sharing this Video!seems to be a good working solution which is cheap too

• 
  @MusikOchProduktion6 ай бұрын

  Sure do! To send command to switch to a specific rig is a little weird: First you send a command CC47 with value bank number (CC47 2 for bank 2), then the Kemper idles and wait for second command which is the rig slot, CC50 1 for slot 1. CC51 1 for slot 2, CC52 1 for slot 3 etc. So if you want to load the rig in bank 3, slot 5 you send two commands: CC47 3 CC54 1

• 
  @marcelpacifico85336 ай бұрын

  Thanks so far! The M-Wave just arrived and honestly I have no clue how to send commands, how to set them up, nor where to start. The M-Wave is connected with the player through the USB-c to USB-A cable and the Player is connected to the computer, on which I use the Rig Manager. Do you have any tips how to start? @@MusikOchProduktion

• 
  @recoverify6 ай бұрын

  With a profiler player on It's way, I'm seriously considering getting a M Vave Chocolate as well to go with it. Did you found out the commands to send to the Kemper by trial and error, or are they mentioned somewhere in the Kempers manual? If I do pull the trigger I will probably use the four buttons to turn the 4 effect blocks on and of in the profiler. Thanks!

• 
  @MusikOchProduktion6 ай бұрын

  The basic commands are in the Player manual, I think some of them I found in the Kemper Profiler main manual that worked for the Player model too. Turn off the four FX slots are no problems 👍

• 
  @recoverify6 ай бұрын

  Thanks! Good to hear. I was also wondering what cable you use to connect it to the player? I read that the chocolate isn't happy with any old TRS cable.@@MusikOchProduktion

• 
  @MusikOchProduktion6 ай бұрын

  @@recoverifyActually it’s plug and play between the Kemper and Chocolate with a standard USB-C to USB-A cable 👍 It even gets power/charge from the Kemper USB.

• 
  @recoverify6 ай бұрын

  @@MusikOchProduktion Perfect! Thanks for the answers! 🙌🏻

• 
  6 ай бұрын

  I bought a Kemper player and would like my DAW to control it via USB/Midi. Is it possible? I can do it at the Kemper stage. I already use it like this. But I can't do it in the player. Can you help me?

• 
  @MusikOchProduktion6 ай бұрын

  Absolutely, that should be just as easy as with the Stage. Just plug in USB cable from Player to the computer and it should be the same process as with the Stage. You don't need any MIDI-cables. The Player will show up as an interface in your DAW. /Stefan

• 
  6 ай бұрын

  Yes, it appears, but I create the MIDI commands for the program changes and nothing happens :/

• 
  @MusikOchProduktion6 ай бұрын

  @ Actually I haven't been successful with program changes either. But it should work to send CC-commands instead like the ones in my video. To send command to switch to a specific rig is a little weird: First you send a command CC47 with value bank number (CC47 2 for bank 2), then the Kemper idles and wait for second command which is the rig slot, CC50 1 for slot 1. CC51 1 for slot 2, CC52 1 for slot 3 etc. So if you want the rig in bank 3, slot 5 you send two commands: CC47 3 CC54 1

• 
  6 ай бұрын

  Hummmmmmmm I don’t really know how to add these values, but I understood the logic behind it. I’ll try.

• 
  @MusikOchProduktion6 ай бұрын

  @ Try google your DAW and "send CC commands"

• 
  @tsachou6 ай бұрын

  not bad

• 
  @fridastromberg54077 ай бұрын

  Bra låtar

• 
  @MusikOchProduktion6 ай бұрын

  Tack! 🤩

• 
  @user-uj2pu5nd8h8 ай бұрын

  ウェｰｲ

• 
  @leojohansson21958 ай бұрын

  hmmm🤔

• 
  @d_vibe-swe Жыл бұрын

  Blue

• 
  @MusikOchProduktion Жыл бұрын

  🥳

• 
  @jonaskarlsson3363 Жыл бұрын

  Blue (Da ba dee) Eiffel 65?

• 
  @MusikOchProduktion Жыл бұрын

  Jajjemen! 🥳 (Eller I´m Good i den nya versionen)

• 
  @jsrasmus Жыл бұрын

  Lady gaga - poker face

• 
  @MusikOchProduktion Жыл бұрын

  Rätt! 🥳

• 
  @jsrasmus Жыл бұрын

  Ja!

• 
  @jirehhumbertdiwa7369 Жыл бұрын

  Hey man can you share me your patches I have modx too your patches is insanely goodd sounding!!!

• 
  @MusikOchProduktion Жыл бұрын

  I think I have uploaded most of them on Soundmondo, search for user: Stefan_C ;-)

• 
  @huntermcniel5082 Жыл бұрын

  Do you have a way of downloading these ??

• 
  @user-nj7sk6xd9m Жыл бұрын

  If you like the bass player, please tell me. FC Thailand 🇹🇭

• 
  @DobleCTheMinisters2 жыл бұрын

  Can you share those samples?

• 
  @MusikOchProduktion2 жыл бұрын

  Is there anyone in particular you are interested in?

• 
  @joe-mens86782 жыл бұрын

  Very nice sound can I have your contact?

• 
  @MusikOchProduktion2 жыл бұрын

  You can follow me/DM on Instagram @musikochproduktion

• 
  @_emanmodnar2 жыл бұрын

  Why not use the learn function…?

• 
  @thkeyboardsounds2 жыл бұрын

  Yeah, the super knob is a very cool function and you can do a lot of more than only changing of the volumes :) Thanks for the demo!

• 
  @MusikOchProduktion2 жыл бұрын

  Thank you!

• 
  @DiegoBezerraMusicKeyboard2 жыл бұрын

  hello I tried to do this on Yamaha montage with iPad Pro but it doesn't work can you help me?

• 
  @MusikOchProduktion2 жыл бұрын

  Sure! Have you checked in Montage settings that you use ”USB-midi”? I also have checked the box ”Midi i/o multi”, don’t know if that matters 🤷‍♂️😝

• 
  @DiegoBezerraMusicKeyboard2 жыл бұрын

  Could it be the forscore version? I'm using 13.0 ! the rest I'm using the midi in/out tab on the midi option and on the advanced tab I'm also using it in multi mode! but nothing happens!

• 
  @MusikOchProduktion2 жыл бұрын

  I’m using Forscore 13.0.5 also. Acctually tried using my iPad Pro, works too. But since it has USB-C I had to use a different adaptor from USB-C to ”standard” USB female. Are you plugging it in the correct connection/hole in the back? (The square one not the one that fits a USB-stick)

• 
  @MusikOchProduktion2 жыл бұрын

  @@DiegoBezerraMusicKeyboard I could send you photos of my settings if you want to. Just send an email to [email protected] and I’ll reply.

• 
  @DiegoBezerraMusicKeyboard2 жыл бұрын

  yes, all cables and connections are the same as in your video! I'm thinking that the channel 1 of the modx you insert in forscore may be different in the montage! I'm downloading the yamaha midi manual to check this!

• 
  @mikecampbell69382 жыл бұрын

  What sound system/speakers are you using?

• 
  @MusikOchProduktion2 жыл бұрын

  Actually I mostly use this when I play live in venues (with in-ear monitoring). When I practice or program sounds I usually use headphones too 🙈😜

• 
  @mikecampbell69382 жыл бұрын

  @@MusikOchProduktion what is the sound coming through in this video?

• 
  @MusikOchProduktion2 жыл бұрын

  @@mikecampbell6938 Oh, I used a USB-cable directly to my iPhone when I recorded this. The keyboard has an integrated audio interface.

• 
  @mikecampbell69382 жыл бұрын

  @@MusikOchProduktion it sounds good!

• 
  @user-yk3ez9zf8k2 жыл бұрын

  👍🎹👌!!!

• 
  @cahenglish2 жыл бұрын

  I just discovered forScore and now find out it can do this with my MODX! Thank you.

• 
  @MusikOchProduktion2 жыл бұрын

  Glad I could help! 😀

• 
  @AndyGonzalezMusic2 жыл бұрын

  What is the patch of the sound called? Sounds good! Just got my montage!! :)

• 
  @MusikOchProduktion2 жыл бұрын

  I´m not sure. I think it might be "Boogie synth bass". I can check next time I use my Modx!

• 
  @pauloyoshizaki21032 жыл бұрын

  Yamaha ; MODX 8 : New Model ; Lançamentos new : 86 keys ; Top ; Teclados : Tem : KNOB : BUTTON ; New : Arpeggios ; New : model : Yamaha : Sintetizador ..

• 
  @xfloodcasual81242 жыл бұрын

  Man you gotta get a better keyboard stand

• 
  @MusikOchProduktion2 жыл бұрын

  Haha, yeah I've got a couple of more stable ones too :-P

• 
  @fnonaka2 жыл бұрын

  Did u make the "Can't stop this feeling" sound by yourself or u bought from NARF sounds? Wich piano + effect u applied?

• 
  @MusikOchProduktion2 жыл бұрын

  I made it myself. I can check the effects or maybe upload it to Soundmundo 👍

• 
  @MusikOchProduktion2 жыл бұрын

  I have now uploaded it on Soundmondo. Search for Stefan_C

• 
  @danielbelik3 жыл бұрын

  That's awesome. I use for this a bt adapter called Quicco Sound Mi 1 for wireless connection.

• 
  @MusikOchProduktion3 жыл бұрын

  Oh, that's great!

• 
  @Kaipiano_3 жыл бұрын

  Nice video. How do you make the sound go straight from the keyboard to KZread audio?

• 
  @MusikOchProduktion3 жыл бұрын

  I actually used a USB cable from MODX directly to my iPhone (keyboard as USB audio interface). Then I just recorded the video with the camera app as usual. Unfortunately the audio became mono. Don´t know why though...

• 
  @Kaipiano_3 жыл бұрын

  @@MusikOchProduktion thanks I didn’t even know my modx has a usb cable in the back

• 
  @Kaipiano_3 жыл бұрын

  @@MusikOchProduktion i just tried it and I hear no audio

• 
  @MusikOchProduktion3 жыл бұрын

  Are you using the square port in the back aka ”printer port” with a camera connection kit? Check my video with Forescore sheet reader where I use the same cable. Also try to connect the cable after you have started recording with the camera app.

• 
  @Kaipiano_3 жыл бұрын

  @@MusikOchProduktion no I was only using usb to iphone in the usb to host port

• 
  @user-ny4gi7el2h3 жыл бұрын

  nice

• 
  @MusikOchProduktion3 жыл бұрын

  Thanx!

• 
  @danielortizdecaracas3 жыл бұрын

  what is Bread & Butter sounds? i dont know this meaning

• 
  @MusikOchProduktion3 жыл бұрын

  I’m thinking the daily use/something that always work. ”Quick & easy” get there kind of sounds. Guess like most often usable sounds. In Sweden we sometimes say ”Meat & Potatoes” 🤣

• 
  @danielortizdecaracas3 жыл бұрын

  @@MusikOchProduktion ok, working sounds, for almost musilca generes, yeah, thanks

• 
  @abohsukampret2 жыл бұрын

  "Bread & butter" means the standard sounds you would normally play on a keyboard without any tweaking/sound designing: Piano, EP, organ, strings, brass.

• 
  @UniqueThaPoet3 жыл бұрын

  I always thought that super knob looks like a nipple….lol

• 
  @MusikOchProduktion3 жыл бұрын

  Sure does 🙈😂

• 
  @MusikOchProduktion3 жыл бұрын

  Luckily you can turn the nipple blinking off 😝

• 
  @MusikOchProduktion3 жыл бұрын

  Yup. For every preset you can choose any led colour and if you want steady light or flashing in tempo of the preset (or off completely). I usally go with flashing only if I use arpeggios. It becomes like a silent metronome then.

• 
  @borispradel10372 жыл бұрын

  @M Luiz This is a great synth, but damn it's ugly and that nipple is so tacky.

• 
  @thesoundzband34513 жыл бұрын

  THATS NICE, BRASS DID YOU DO ANY EDITITING ON THE SOUNDS

• 
  @MusikOchProduktion3 жыл бұрын

  I can check, but I have layered a couple of different sounds depending on how hard I press etc. Also I would think I have pitched them a little bit different a couple of cents to make it sound more realistic.

• 
  @thesoundzband34513 жыл бұрын

  @@MusikOchProduktion yes it's very nice sounding, if you can let me know which brass it is, would be great thanks.

• 
  @MusikOchProduktion3 жыл бұрын

  Sure, I can check. If you use Soundmono I think I have uploaded this brass preset so you can download it. Search for Stefan_C, it’s my username there.

• 
  @thesoundzband34513 жыл бұрын

  @@MusikOchProduktion Good stuff, many thanks

• 
  @kennyb70393 жыл бұрын

  Great video but your bouncing Keyboard is driven me crazy.

• 
  @MusikOchProduktion3 жыл бұрын

  Haha, me too 😂

• 
  @torkelzettergren3 жыл бұрын

  Yeah, Baloo.. I can see You :-) Härligt att se att Du fortfarande pumpar på!!