Hi there! I'm a professional car cleaner, but I have degrees in social work and social readaptation for youth work. I am a car guy with a Suzuki Swift Sport, a Mash Cafe Racer 125cc, a KTM RC 125cc and some old timers. Hope you enjoy the videos!
@@user-lw7ir1hm8h true, but I'm not willing to fiddle with a 25 year old carburetor lol. As long as it's rolling, I'm good 😂
@lorenamorais283Ай бұрын
Hi is it street legal in switzerland?
@StefstylezzАй бұрын
@@lorenamorais283 hi! I'm not sure. If Switzerland follows the EU regulations regarding exhausts, then no. There is no EU number on the muffler, and as a generic slip-on, almost no new mufflers have an EU number. They have to be specific for a certain bike and then they need to be tested and homologated. So I'm afraid not, but I'm not 100% sure
@lorenamorais283Ай бұрын
@@Stefstylezzthank you for the reply! In this case, no supplementary sheet has been provided?
@StefstylezzАй бұрын
@@lorenamorais283 you're welcome! It just arrived as the muffler, nothing more and nothing less. Also on the exhaust are no markings to suggest it has been tested to fall under certain guidelines. So I am afraid it is not road legal 😕
@hl7187Ай бұрын
Ότι καλύτερο. Έχεις και ηχητικά εφε
@ArK_TACTICSАй бұрын
this is insane! it make the motor sound even better :)
@rooorooo02200220Ай бұрын
VW ist nicht mehr Das Auto…
@RnK10902 ай бұрын
No stage 2
@ExTAZzHSA2 ай бұрын
How to remove Intake baffle
@Stefstylezz2 ай бұрын
Hi! When you remove the left plastic cover, you can see the OEM airbox. Where the air enters the airbox, you can see 3 screws. If you remove these 3 screws, you can pull out the baffle. The filter will still sit nicely in the airbox, but it will be a lot louder! Hope I was able to help you!
@ExTAZzHSA2 ай бұрын
@@Stefstylezz yes thanks, it's not dangerous for the motor ?
@Stefstylezz2 ай бұрын
@@ExTAZzHSA it should not be. It is a slight restriction, but mostly for the sound. The filter element in the original airbox is of a very bad quality, that is more of a problem. The bikes can also adjust their fuel levels a little bit to adjust for the difference in air there might be. I run a different air filter that does actually deliver more air, and the bike is not always happy with that one. But this baffle is mostly for sound, so should be good to go.
@davidquintao81723 ай бұрын
jsuis trop fan de cette vidéo asmr !!! les sons me donnent des frissons et c'est super relaxant - merci pour ce moment de détente ❤❤Sylvie
@dieselhead9994 ай бұрын
Great man ❤
@Mezg3r4 ай бұрын
where did you buy the db killer for snell slipon?
@Stefstylezz4 ай бұрын
Hi! I bought the slip-on from XLmoto, and the DB killer was included in the kit: www.xlmoto.be/product/geluiddemper-snell-classic-zwart_pid-PIA-37720
@jesus.h.1086 ай бұрын
im having problems with removing the cap, it looks fixed, any ideas to solve it? thank you
@Stefstylezz6 ай бұрын
There are different types of this exhaust, this is about the most replicated exhaust you can find... I just loosened the 3 screws holding that cap on, and then got off the cap. If it is stuck on there, you can remove the exhaust off the bike and hit the inside of the exhaust with a pipe from the front. It should dislodge the end cap. That's also how I removed the inside of the exhaust to install the other inside pipe with the DB killer. Hope that helps, and hope you get the instalation done!
@jesus.h.1086 ай бұрын
@@Stefstylezz 👌🏼👍🏼 Solved! i removed the exhaust and hit the inside with a screwer and a hammer. Thank you! 😉
@Stefstylezz6 ай бұрын
@@jesus.h.108 nice! Glad I could help you!
@Guzto-uw1ru9 ай бұрын
nice soound is this exhaust street legal?
@Stefstylezz9 ай бұрын
Hi! The exhaust does not have a European number on it. So in theory it is not street legal. Considering the volume, I think I can get away with it, but it is not... there are not a lot of street legal exhausts for this bike... so I went with this one 🤷🏻♂️
@aldeen19829 ай бұрын
Verstehe das "how to" jetzt nicht. Ist ja keine Anleitung. Du fährst einfach nur drauf :D
@Stefstylezz9 ай бұрын
Correct haha, the way to merge with a 125cc is just to give it all she's got! Title is a bit of wordplay 😁
@TheRookieRider9 ай бұрын
Cool bike! I ride on a 125 mash too ❤
@Stefstylezz9 ай бұрын
Looks like you done some work to your bike too! Enjoy!
@TheRookieRider9 ай бұрын
@@Stefstylezz just a more "tourer" setup
@PrincessPeachh9 ай бұрын
More like this ❤
@mr.miscellaneous91449 ай бұрын
This was quite nice, and surprisingly recent. I didnt think people still made asmr, aside from the big names that have a dedicated fanbase anyway. Keep up the good work, youre doing a great job so far!
@mrstupid9 ай бұрын
My Megaton silencers made in the 1960s do not look like that on the inside. Are they marked Megaton and made in England ? I have a video on my channel of the Megatons on my T120r
@Stefstylezz9 ай бұрын
Hi! I checked your video and they do look slightly different. These exhausts are sold online as being a Megaton exhaust. They are very generic, you can find simular ones in China for less money. The link to the exhaust should be in the description under the video, that is the one I bought and installed. Nice Triumph! Cheers!
@mrstupid9 ай бұрын
I have tried a Megaton copy which has a steel cone and they are extremely loud. I found these 1960s originals at an autojumble a few years ago. Not found any that sound as nice on a Triumph twin.@@Stefstylezz
@Stefstylezz9 ай бұрын
@mrstupid yes, these Megaton exhausts / fake Megaton exhausts are ear piercingly loud... that's why I had to install a completely different internal structure to put some extra dampening wool in there... the Triumph sounds good! With the completely open Megaton pipes, it would sound trashy... So I'm not sure where this one is built, or whether or not it is a genuine Megaton exhaust. But I would think it is genuine considering I bought it from a reputable seller. But on my 125cc, it was unbearably loud... even with the different internals and the dampening wool, it is very loud haha
@mrstupid9 ай бұрын
I have a video of my T120r with the emgo megaphones. It is the video that opens the channel and was about 10 years ago.Not used them for a few years as it makes my ears sore. Possibly the loudest ones i have fitted but good performance. The real old ones are a lot quieter despite no sound deadening material. I really like them but currently using yet another type !@@Stefstylezz
@Stefstylezz9 ай бұрын
@mrstupid sounds great! But I can imagine the volume... glad you found a different set of pipes you like!
@jivanlakra566810 ай бұрын
How to reduce air noise
@Stefstylezz10 ай бұрын
I used the settings of the camera. So the camera tries to suppress the noise of the wind. You can also add an attachment to connect an external microphone, but I don't have that. In the option menu, turn on the noise reduction mode. Hope that helps!
@FEARYOYOYO10 ай бұрын
Beautiful. Thanks for posting.
@lodeheylen415911 ай бұрын
Is it still comfortable riding with the exhaust +3 screws in?
@Stefstylezz11 ай бұрын
Hi Lode! The exhaust is still relatively loud... it is possible to ride around like that, no worries. But of course, the megaton will always be loud... I used to ride around with all of the screws in or with one screw out, so it is possible. Are you looking to put this exhaust on a bike? Thanks for watching!
@mavelk114111 ай бұрын
how do you install it?
@Stefstylezz11 ай бұрын
Hi! It's on my channel: kzread.info/dash/bejne/i4mZ2a6joMeqirw.html
@andybosch785711 ай бұрын
Haha, heb deze laatst op mijn 50cc gezet als amateur. Kwam er inderdaad op de pijnlijke manier achter dat ik deze demper nodig had.
@Stefstylezz11 ай бұрын
Ik vreesde het al voor mijn 125, maar het is ongelooflijk luid haha. Dus een demper is inderdaad nodig, ik durfde er echt niet mee te rijden 🙈 hopelijk lukt de installatie! Op wat heb je de uitlaat gestoken?
@andybosch785711 ай бұрын
@@Stefstylezz Ik heb een Mash Fifty, maar de originele uitlaat is niet modulair. Dus ik heb de uitlaat gekocht van de Mash Scrambler en de muffler vervangen voor de Megaton. Ik ben er dus wel een keer mee naar werk gereden, en op werk een DB meting uitgevoerd.
@Stefstylezz11 ай бұрын
@@andybosch7857 die DB meting zal wel heel hoog geweest zijn! Want de megaton zonder demper is echt luid. Je kan ook altijd een generische uitlaat demper er op steken, klinkt meestal ook wel goed!
@andybosch785711 ай бұрын
@@Stefstylezz De meting piekte boven 110 DB. Wacht nu op de dempervulling.
@Stefstylezz11 ай бұрын
@@andybosch7857 110 db is idd echt hoog 😲 hopelijk valt het beter mee als er demping in zit! Bij mij was het een wereld van verschil.
@henrijstomilovs3594 Жыл бұрын
Where did you order front headlight?:)
@Stefstylezz Жыл бұрын
Hi! This is the shin Yo 7 inch projection headlight "cyclops". I bought it from caferacerwebshop. Com. It works fine, I just have a bit of an issue with the relais for the high beam, but that might be because the bike and the headlight don't talk that well haha. But I don't mind, all the other things work great and the light shines very bright without being annoying to other roadusers! You looking for something like this? This headlight is EU approved BTW, so it is roadlegal. Thanks for watching!
@sebdark8TheGamer Жыл бұрын
good evening, how are you, I still have a question, by chance where did you buy your plate lighting because I took it apart but the bulbs are not removable or is there a technique? Because I think the whole thing needs to be changed, if so tell me what did you buy thank you very much
@Stefstylezz Жыл бұрын
Hi! I don't actually know how to change them, because they were in there when I bought the car... but I do believe it is possible to change just the bulbs. I found a video showing this on a normal swift: kzread.info/dash/bejne/eISKms-to7ifl8o.html I hope that can help!
@sebdark8TheGamer Жыл бұрын
oh yeah nickel so had to do that then, a big thank you I didn't find this video at all, it's going to help me a lot, I wish you a good end of the evening and a big thank you again 🙌🏼
@Stefstylezz Жыл бұрын
@@sebdark8TheGamer no problem! Good evening to you aswell!
@Oldheritage68 Жыл бұрын
Yup, that's loud!
@DotEks Жыл бұрын
Gloves look sick
@eliasfrancis2911 Жыл бұрын
Hallo ik heb hem gekocht maar ik krijg het deksel er niet meer op bij de megaton muffler er in hoe mis ik dit op ?
@Stefstylezz Жыл бұрын
Als je dezelfde onderdelen gekocht hebt zoals ik gebruikt heb, moet je rekening houden dat je niet teveel wol hebt op het eerste deel van de interne buis. Anders kan het zijn dat het binnenwerk niet volledig naar binnen kan schuiven. Je kan eventueel een rubberen hamer gebruiken om een paar tikken te geven. Het binnenwerk heeft 3 inkepingen die aan de schroefgaten moeten zitten, zodat je de vijzen kan monteren in het deksel. Ik heb zelf een beetje wol moeten wegsnijden om het binnenwerk ver genoeg naar binnen te krijgen. Ik zou dat eerst proberen, het binnenwerk is specifiek gemaakt voor deze uitlaat, dus dat zou moeten passen. Je kan ook het originele binnenwerk en de DB killer binnenwerk naast elkaar houden als je twijfelt dat de afmetingen kloppen. Hopelijk lukt het zo wel?
@eliasfrancis2911 Жыл бұрын
@@Stefstylezz ja ik gebruik geen wol ik ga hem er eens uithalen en hem er opnieuw insteken.
@Stefstylezz Жыл бұрын
@@eliasfrancis2911 zonder wol zou die makkelijker moeten passen, maar ik heb ook de eerste keer een paar tikken moeten geven met een rubberen hamer geloof ik. Als je geen rubberen hamer hebt, gebruik dan enkel een metalen hamer als je een stuk hout of zo er kan tussen steken. Anders kan je de vijzen beschadigen. Je mag gerust wat wringen op het binnenwerk, het is allemaal maar gegoten metaal en nogal ruw qua afwerking. Ik zal mee 🤞🏻🤞🏻
@eliasfrancis2911 Жыл бұрын
@@Stefstylezz zal ik morgen eens proberen het geluid is echt veel beter Maar jij had er dus 2 schroeven in en 1 er helemaal uit bedankt dat je zo snel reageert want je vind bijna nergens iemand die je hier bij kan helpen.
@Stefstylezz Жыл бұрын
@@eliasfrancis2911 je vindt inderdaad vrij weinig informatie. Op mijn 125cc had ik veel wol er in gestopt, en ofwel met alle vijzen erin, ofwel met 2 vijzen erin. Anders werd het voor mij te luid... dat is natuurlijk per brommer of moto verschillend. Ik hoop dat het lukt en dat je er van kan genieten!
@dudewat2097 Жыл бұрын
looks like a super chill ride, just exploring the area at a slow pace and taking it all in. id like to find backroads like this in my area to ride my mash on ;)
@Stefstylezz Жыл бұрын
There are moments where you want to carve some corners and there are moments where you just want to take in the scenery. Just visit an area and take a left, take a right. See where the streets take you. Maybe you can also find some quiet and nice roads to clear your head! Ride safe! 🙏🏻
@eliasfrancis2911 Жыл бұрын
I want to buy this to but do i have to get damping wool does the db killer kil the sound without the wool ?
@Stefstylezz Жыл бұрын
I'm not sure as I did not try, but from my experience, the wool is the dampening material. Even if you put wool inside and over time the wool diminishes, you will notice an increase in noise... so I am afraid you do need the wool.
@eliasfrancis2911 Жыл бұрын
@@Stefstylezz okey tank you I am gone buy it do you think it Wil pop with a 50cc
@Stefstylezz Жыл бұрын
@eliasfrancis2911 the newer the bike, the more strict the rules are for emissions. So depending on the bike, you can still try to make it pop, some bikes like a Honda Dax and all of their Chinese knockoff versions seem to produce pops for example. What bike are you going to put it on?
@eliasfrancis2911 Жыл бұрын
@@Stefstylezz its a archive café racer
@Stefstylezz Жыл бұрын
@@eliasfrancis2911 that will look good man! Nice, hope you like the look and sound when you install it! Ride safe 🙏🏻
@eliasfrancis2911 Жыл бұрын
Is this with one screw out
@Stefstylezz Жыл бұрын
Correct. This is with one screw removed. It makes the exhaust just that bit louder haha.
@sebdark8TheGamer Жыл бұрын
hello, what year model is this, thank you?
@Stefstylezz Жыл бұрын
Hi, this is a 2013 Suzuki Swift Sport. The model code is a ZC32S. Hope that helps! I have another video on my channel showing the car more in depth and highlighting the changes I made.
@sebdark8TheGamer Жыл бұрын
@@Stefstylezz big thank you
@robertl955 Жыл бұрын
Chemical guys stuff is overpriced gor what it is, most detailers use p&s carpet bomber
@Stefstylezz Жыл бұрын
Everyone has their preferences, but most of the chemical guys products are rather mid for what they cost, that is true. This carpet cleaner I don't really like. You can dilute it, but for what is does it still is caustic and will get you coughing, while being not so potent... so I will search for a different product if I keep using the Bissell. Thanks for the recommendation of P&S carpet bomber!
@robertl955 Жыл бұрын
@@Stefstylezz Thanks for the review of the bissel, I need to buy one of these.
@Stefstylezz Жыл бұрын
@@robertl955 I really like it. It is relatively cheap, and very easy to use. The package includes a bottle of Bissell cleaner. So you don't even need a cleaner!
@crazzyskilled6181 Жыл бұрын
great extractions turned out great keep it up
@9Cis Жыл бұрын
It's easy to assemble?
@Stefstylezz Жыл бұрын
The exhaust is assembled when it arrives. The only thing I had to do was grind down the adapter to make it fit my stock header. The DB killer is just 1 screw. Hope that helps!
@9Cis Жыл бұрын
@@Stefstylezz nice! I'm thinking of buying it, what is your experience with it until now?
@Stefstylezz Жыл бұрын
@9Cis I like the exhaust. Build quality is okay, especially for the price. The sound is very nice and deep, and the DB killer changes it a lot, so you can really make it your own. I would recommend this muffler!
@9Cis Жыл бұрын
@@Stefstylezz many thanks Stef :)
@Larrypint8 ай бұрын
is it comfortable at 100kmh?
@illyplays5697 Жыл бұрын
How did you remove it?
@Stefstylezz Жыл бұрын
Hi, this was straight out of the box. The original internal pipe is straight through with a little bit of dampening wool around it. So this is standard. After this I installed a different internal pipe, with an adjustable DB killer and much more dampening wool. That install is on my channel if you are interested. The Megaton exhaust is always rather loud, especially straight out of the box.
@1996ChevroletImpalaSS Жыл бұрын
That horn doesn’t scare anyone maybe time for an upgrade.
@bmwX3guy Жыл бұрын
Fr.
@FancySniper8 Жыл бұрын
You should do a asmr!
@Stefstylezz Жыл бұрын
That is something I want to do! Unfortunately the sound was really muffled and you could hear the children next door, so I had to mute it and put music over it. But thanks for the feedback!
@michaellawson4473 Жыл бұрын
Good work, Instruct more on what your doing just saying
@Stefstylezz Жыл бұрын
This was the very first time I recorded something like this. Maybe in the future I will get better and include things like that! Thanks for the feedback!
@michaellawson4473 Жыл бұрын
@@Stefstylezz Not a problem, just trying to help you grow
@Kaassje Жыл бұрын
Sounds great
@Nobuffshowluvv Жыл бұрын
Secret answer is C ain’t got no gas in it
@Stefstylezz Жыл бұрын
😂😂
@beatrizmarques8098 Жыл бұрын
Hey great video, I have a question how did you secure the dampening wool?
@Stefstylezz Жыл бұрын
Hi, thanks! I used the metal wire from the original internal pipe, aswell as some painters tape. That's a broadly used technique actually. Sound funny but it does the trick. Otherwise you will not be able to close the exhaust back up. Hope this helps!
@glrblz7635 Жыл бұрын
I have a café racer with the carburetor...the first model
@glrblz7635 Жыл бұрын
For a better carburation
@glrblz7635 Жыл бұрын
Is possible remapping ecu ?
@Stefstylezz Жыл бұрын
Hi, I'm not sure if there is a specific kit for this bike. There is a kit that manipulates the signal from a oxygen sensor. That might be a necessity. Especially with the new foam air filter I put on it, sometimes it protests haha. The carburated version is easier to change!
@glrblz7635 Жыл бұрын
nice bike...good sound
@Sker21 Жыл бұрын
Is one exhaust tip louder than the other???
@Stefstylezz Жыл бұрын
This comparison was between the Remus muffler and then the Remus muffler with the resonator delete midpipe. When you install the midpipe, it is significantly louder. If your question is wether the left or right tip is louder, that funnily enough is the left one, since most of the air comes through that one. I did not experience a difference in sound when I installed different tips. I hope I answered your question, if not, let me know
@Sker21 Жыл бұрын
@@Stefstylezz yes i have the same exhaust and all the sound comes from the left tip i have video on my channel you can check it
@Stefstylezz Жыл бұрын
@@Sker21 that is true. If you open up the exhaust, you can see that the air flow will go straight to the left one, and the air has to flow through dampening material to even go to the right exhaust tip. That is true lol. Also your car also has the very low idle which sound vaguely like a tractor, same here. But it sound nice with the fly by! Also, incredible sound on the subie! 😍
@Sker21 Жыл бұрын
@@Stefstylezz thanks man. Also Did you weld the other exhaust tips on the remus or did you tight them up like the stock remus tips
@Stefstylezz Жыл бұрын
@@Sker21 I have Simoni racing exhaust tips on there, they tighten with 3 screws to center them. But if you loosen them too many times, the screws will start to strip 🙈
@sebdark8TheGamer Жыл бұрын
hello, where did you buy the rear lights and if they are plug and play ?
@Stefstylezz Жыл бұрын
www.concept-s.nl/alle-producten/verlichting-achter/swift-2010-2017/p-1/CS99947--led-bar-achterlichten-zwart-smoke-glas-suzuki-swift-sport-fz-nz-jan-2012-heden-met-led-knipperlicht.html And yes, they were plug and play. Do watch out with the rubber grommets where the cables go into the car, mine leaked afterwards. I had to put some caulking around the grommets and that fixed it. But it was a pretty easy change and it completely changed the look of the car!
@Stefstylezz Жыл бұрын
kzread.info/dash/bejne/gI6VxK16hszIpLg.html you can also find an overview of the changes to my car, along with most of the links in the video I linked!
@sebdark8TheGamer Жыл бұрын
@@Stefstylezz a big thank you for the link and the advice, I'm also from Belgium that's why, very nice configuration in any case, good evening
@justinbos476 Жыл бұрын
What did the upgrades cost in total?
@Stefstylezz Жыл бұрын
Really difficult to say haha. I'm gonna quote prices out of my head. 400 euros for the Remus muffler. 150 euros for the midpipe. 300 euros for the H&R lowering springs and afterwards 500 euros for the current voilovers. Also 250 euros for the rear lights, 50 euros for the led side blinkers. 150 for the rear spoiler. 1000 euros for the audio installation (front speakers and subwoofer in the trunk). 300 euros for the DTN intake. 100 euros for the carbon fibre coil cover and about 150 for the titanium heat shield over the headers. There are some miscellaneous things, but I think these are most prominent modifications. So in total not sure, a while ago I calculated at about 3000 - 3500, but now I'm not sure lol. Hope that helps, many links can be found on the video I made as an overview! That one is in my channel. Thanks for watching!
@francecanion8338 Жыл бұрын
🥺🥺🥺🥺🐱🐈
@recur9245 Жыл бұрын
i had a straight pipe remus twin sounded quite nice, raspy! ive often thought about a getting a single muffler though
@Stefstylezz Жыл бұрын
Yes, with the Remus backbox, as well as with the Ulter Sport exhaust that I customised it sounds nice. There are a few single mufflers in Japan that seem to sound nice, but I don't think they would be legal in Belgium 😑 although this straight pipe is also technically not completely legal 😇😂
Пікірлер
Seems like it’s idling a little slow
@@user-lw7ir1hm8h true, but I'm not willing to fiddle with a 25 year old carburetor lol. As long as it's rolling, I'm good 😂
Hi is it street legal in switzerland?
@@lorenamorais283 hi! I'm not sure. If Switzerland follows the EU regulations regarding exhausts, then no. There is no EU number on the muffler, and as a generic slip-on, almost no new mufflers have an EU number. They have to be specific for a certain bike and then they need to be tested and homologated. So I'm afraid not, but I'm not 100% sure
@@Stefstylezzthank you for the reply! In this case, no supplementary sheet has been provided?
@@lorenamorais283 you're welcome! It just arrived as the muffler, nothing more and nothing less. Also on the exhaust are no markings to suggest it has been tested to fall under certain guidelines. So I am afraid it is not road legal 😕
Ότι καλύτερο. Έχεις και ηχητικά εφε
this is insane! it make the motor sound even better :)
VW ist nicht mehr Das Auto…
No stage 2
How to remove Intake baffle
Hi! When you remove the left plastic cover, you can see the OEM airbox. Where the air enters the airbox, you can see 3 screws. If you remove these 3 screws, you can pull out the baffle. The filter will still sit nicely in the airbox, but it will be a lot louder! Hope I was able to help you!
@@Stefstylezz yes thanks, it's not dangerous for the motor ?
@@ExTAZzHSA it should not be. It is a slight restriction, but mostly for the sound. The filter element in the original airbox is of a very bad quality, that is more of a problem. The bikes can also adjust their fuel levels a little bit to adjust for the difference in air there might be. I run a different air filter that does actually deliver more air, and the bike is not always happy with that one. But this baffle is mostly for sound, so should be good to go.
jsuis trop fan de cette vidéo asmr !!! les sons me donnent des frissons et c'est super relaxant - merci pour ce moment de détente ❤❤Sylvie
Great man ❤
where did you buy the db killer for snell slipon?
Hi! I bought the slip-on from XLmoto, and the DB killer was included in the kit: www.xlmoto.be/product/geluiddemper-snell-classic-zwart_pid-PIA-37720
im having problems with removing the cap, it looks fixed, any ideas to solve it? thank you
There are different types of this exhaust, this is about the most replicated exhaust you can find... I just loosened the 3 screws holding that cap on, and then got off the cap. If it is stuck on there, you can remove the exhaust off the bike and hit the inside of the exhaust with a pipe from the front. It should dislodge the end cap. That's also how I removed the inside of the exhaust to install the other inside pipe with the DB killer. Hope that helps, and hope you get the instalation done!
@@Stefstylezz 👌🏼👍🏼 Solved! i removed the exhaust and hit the inside with a screwer and a hammer. Thank you! 😉
@@jesus.h.108 nice! Glad I could help you!
nice soound is this exhaust street legal?
Hi! The exhaust does not have a European number on it. So in theory it is not street legal. Considering the volume, I think I can get away with it, but it is not... there are not a lot of street legal exhausts for this bike... so I went with this one 🤷🏻♂️
Verstehe das "how to" jetzt nicht. Ist ja keine Anleitung. Du fährst einfach nur drauf :D
Correct haha, the way to merge with a 125cc is just to give it all she's got! Title is a bit of wordplay 😁
Cool bike! I ride on a 125 mash too ❤
Looks like you done some work to your bike too! Enjoy!
@@Stefstylezz just a more "tourer" setup
More like this ❤
This was quite nice, and surprisingly recent. I didnt think people still made asmr, aside from the big names that have a dedicated fanbase anyway. Keep up the good work, youre doing a great job so far!
My Megaton silencers made in the 1960s do not look like that on the inside. Are they marked Megaton and made in England ? I have a video on my channel of the Megatons on my T120r
Hi! I checked your video and they do look slightly different. These exhausts are sold online as being a Megaton exhaust. They are very generic, you can find simular ones in China for less money. The link to the exhaust should be in the description under the video, that is the one I bought and installed. Nice Triumph! Cheers!
I have tried a Megaton copy which has a steel cone and they are extremely loud. I found these 1960s originals at an autojumble a few years ago. Not found any that sound as nice on a Triumph twin.@@Stefstylezz
@mrstupid yes, these Megaton exhausts / fake Megaton exhausts are ear piercingly loud... that's why I had to install a completely different internal structure to put some extra dampening wool in there... the Triumph sounds good! With the completely open Megaton pipes, it would sound trashy... So I'm not sure where this one is built, or whether or not it is a genuine Megaton exhaust. But I would think it is genuine considering I bought it from a reputable seller. But on my 125cc, it was unbearably loud... even with the different internals and the dampening wool, it is very loud haha
I have a video of my T120r with the emgo megaphones. It is the video that opens the channel and was about 10 years ago.Not used them for a few years as it makes my ears sore. Possibly the loudest ones i have fitted but good performance. The real old ones are a lot quieter despite no sound deadening material. I really like them but currently using yet another type !@@Stefstylezz
@mrstupid sounds great! But I can imagine the volume... glad you found a different set of pipes you like!
How to reduce air noise
I used the settings of the camera. So the camera tries to suppress the noise of the wind. You can also add an attachment to connect an external microphone, but I don't have that. In the option menu, turn on the noise reduction mode. Hope that helps!
Beautiful. Thanks for posting.
Is it still comfortable riding with the exhaust +3 screws in?
Hi Lode! The exhaust is still relatively loud... it is possible to ride around like that, no worries. But of course, the megaton will always be loud... I used to ride around with all of the screws in or with one screw out, so it is possible. Are you looking to put this exhaust on a bike? Thanks for watching!
how do you install it?
Hi! It's on my channel: kzread.info/dash/bejne/i4mZ2a6joMeqirw.html
Haha, heb deze laatst op mijn 50cc gezet als amateur. Kwam er inderdaad op de pijnlijke manier achter dat ik deze demper nodig had.
Ik vreesde het al voor mijn 125, maar het is ongelooflijk luid haha. Dus een demper is inderdaad nodig, ik durfde er echt niet mee te rijden 🙈 hopelijk lukt de installatie! Op wat heb je de uitlaat gestoken?
@@Stefstylezz Ik heb een Mash Fifty, maar de originele uitlaat is niet modulair. Dus ik heb de uitlaat gekocht van de Mash Scrambler en de muffler vervangen voor de Megaton. Ik ben er dus wel een keer mee naar werk gereden, en op werk een DB meting uitgevoerd.
@@andybosch7857 die DB meting zal wel heel hoog geweest zijn! Want de megaton zonder demper is echt luid. Je kan ook altijd een generische uitlaat demper er op steken, klinkt meestal ook wel goed!
@@Stefstylezz De meting piekte boven 110 DB. Wacht nu op de dempervulling.
@@andybosch7857 110 db is idd echt hoog 😲 hopelijk valt het beter mee als er demping in zit! Bij mij was het een wereld van verschil.
Where did you order front headlight?:)
Hi! This is the shin Yo 7 inch projection headlight "cyclops". I bought it from caferacerwebshop. Com. It works fine, I just have a bit of an issue with the relais for the high beam, but that might be because the bike and the headlight don't talk that well haha. But I don't mind, all the other things work great and the light shines very bright without being annoying to other roadusers! You looking for something like this? This headlight is EU approved BTW, so it is roadlegal. Thanks for watching!
good evening, how are you, I still have a question, by chance where did you buy your plate lighting because I took it apart but the bulbs are not removable or is there a technique? Because I think the whole thing needs to be changed, if so tell me what did you buy thank you very much
Hi! I don't actually know how to change them, because they were in there when I bought the car... but I do believe it is possible to change just the bulbs. I found a video showing this on a normal swift: kzread.info/dash/bejne/eISKms-to7ifl8o.html I hope that can help!
oh yeah nickel so had to do that then, a big thank you I didn't find this video at all, it's going to help me a lot, I wish you a good end of the evening and a big thank you again 🙌🏼
@@sebdark8TheGamer no problem! Good evening to you aswell!
Yup, that's loud!
Gloves look sick
Hallo ik heb hem gekocht maar ik krijg het deksel er niet meer op bij de megaton muffler er in hoe mis ik dit op ?
Als je dezelfde onderdelen gekocht hebt zoals ik gebruikt heb, moet je rekening houden dat je niet teveel wol hebt op het eerste deel van de interne buis. Anders kan het zijn dat het binnenwerk niet volledig naar binnen kan schuiven. Je kan eventueel een rubberen hamer gebruiken om een paar tikken te geven. Het binnenwerk heeft 3 inkepingen die aan de schroefgaten moeten zitten, zodat je de vijzen kan monteren in het deksel. Ik heb zelf een beetje wol moeten wegsnijden om het binnenwerk ver genoeg naar binnen te krijgen. Ik zou dat eerst proberen, het binnenwerk is specifiek gemaakt voor deze uitlaat, dus dat zou moeten passen. Je kan ook het originele binnenwerk en de DB killer binnenwerk naast elkaar houden als je twijfelt dat de afmetingen kloppen. Hopelijk lukt het zo wel?
@@Stefstylezz ja ik gebruik geen wol ik ga hem er eens uithalen en hem er opnieuw insteken.
@@eliasfrancis2911 zonder wol zou die makkelijker moeten passen, maar ik heb ook de eerste keer een paar tikken moeten geven met een rubberen hamer geloof ik. Als je geen rubberen hamer hebt, gebruik dan enkel een metalen hamer als je een stuk hout of zo er kan tussen steken. Anders kan je de vijzen beschadigen. Je mag gerust wat wringen op het binnenwerk, het is allemaal maar gegoten metaal en nogal ruw qua afwerking. Ik zal mee 🤞🏻🤞🏻
@@Stefstylezz zal ik morgen eens proberen het geluid is echt veel beter Maar jij had er dus 2 schroeven in en 1 er helemaal uit bedankt dat je zo snel reageert want je vind bijna nergens iemand die je hier bij kan helpen.
@@eliasfrancis2911 je vindt inderdaad vrij weinig informatie. Op mijn 125cc had ik veel wol er in gestopt, en ofwel met alle vijzen erin, ofwel met 2 vijzen erin. Anders werd het voor mij te luid... dat is natuurlijk per brommer of moto verschillend. Ik hoop dat het lukt en dat je er van kan genieten!
looks like a super chill ride, just exploring the area at a slow pace and taking it all in. id like to find backroads like this in my area to ride my mash on ;)
There are moments where you want to carve some corners and there are moments where you just want to take in the scenery. Just visit an area and take a left, take a right. See where the streets take you. Maybe you can also find some quiet and nice roads to clear your head! Ride safe! 🙏🏻
I want to buy this to but do i have to get damping wool does the db killer kil the sound without the wool ?
I'm not sure as I did not try, but from my experience, the wool is the dampening material. Even if you put wool inside and over time the wool diminishes, you will notice an increase in noise... so I am afraid you do need the wool.
@@Stefstylezz okey tank you I am gone buy it do you think it Wil pop with a 50cc
@eliasfrancis2911 the newer the bike, the more strict the rules are for emissions. So depending on the bike, you can still try to make it pop, some bikes like a Honda Dax and all of their Chinese knockoff versions seem to produce pops for example. What bike are you going to put it on?
@@Stefstylezz its a archive café racer
@@eliasfrancis2911 that will look good man! Nice, hope you like the look and sound when you install it! Ride safe 🙏🏻
Is this with one screw out
Correct. This is with one screw removed. It makes the exhaust just that bit louder haha.
hello, what year model is this, thank you?
Hi, this is a 2013 Suzuki Swift Sport. The model code is a ZC32S. Hope that helps! I have another video on my channel showing the car more in depth and highlighting the changes I made.
@@Stefstylezz big thank you
Chemical guys stuff is overpriced gor what it is, most detailers use p&s carpet bomber
Everyone has their preferences, but most of the chemical guys products are rather mid for what they cost, that is true. This carpet cleaner I don't really like. You can dilute it, but for what is does it still is caustic and will get you coughing, while being not so potent... so I will search for a different product if I keep using the Bissell. Thanks for the recommendation of P&S carpet bomber!
@@Stefstylezz Thanks for the review of the bissel, I need to buy one of these.
@@robertl955 I really like it. It is relatively cheap, and very easy to use. The package includes a bottle of Bissell cleaner. So you don't even need a cleaner!
great extractions turned out great keep it up
It's easy to assemble?
The exhaust is assembled when it arrives. The only thing I had to do was grind down the adapter to make it fit my stock header. The DB killer is just 1 screw. Hope that helps!
@@Stefstylezz nice! I'm thinking of buying it, what is your experience with it until now?
@9Cis I like the exhaust. Build quality is okay, especially for the price. The sound is very nice and deep, and the DB killer changes it a lot, so you can really make it your own. I would recommend this muffler!
@@Stefstylezz many thanks Stef :)
is it comfortable at 100kmh?
How did you remove it?
Hi, this was straight out of the box. The original internal pipe is straight through with a little bit of dampening wool around it. So this is standard. After this I installed a different internal pipe, with an adjustable DB killer and much more dampening wool. That install is on my channel if you are interested. The Megaton exhaust is always rather loud, especially straight out of the box.
That horn doesn’t scare anyone maybe time for an upgrade.
Fr.
You should do a asmr!
That is something I want to do! Unfortunately the sound was really muffled and you could hear the children next door, so I had to mute it and put music over it. But thanks for the feedback!
Good work, Instruct more on what your doing just saying
This was the very first time I recorded something like this. Maybe in the future I will get better and include things like that! Thanks for the feedback!
@@Stefstylezz Not a problem, just trying to help you grow
Sounds great
Secret answer is C ain’t got no gas in it
😂😂
Hey great video, I have a question how did you secure the dampening wool?
Hi, thanks! I used the metal wire from the original internal pipe, aswell as some painters tape. That's a broadly used technique actually. Sound funny but it does the trick. Otherwise you will not be able to close the exhaust back up. Hope this helps!
I have a café racer with the carburetor...the first model
For a better carburation
Is possible remapping ecu ?
Hi, I'm not sure if there is a specific kit for this bike. There is a kit that manipulates the signal from a oxygen sensor. That might be a necessity. Especially with the new foam air filter I put on it, sometimes it protests haha. The carburated version is easier to change!
nice bike...good sound
Is one exhaust tip louder than the other???
This comparison was between the Remus muffler and then the Remus muffler with the resonator delete midpipe. When you install the midpipe, it is significantly louder. If your question is wether the left or right tip is louder, that funnily enough is the left one, since most of the air comes through that one. I did not experience a difference in sound when I installed different tips. I hope I answered your question, if not, let me know
@@Stefstylezz yes i have the same exhaust and all the sound comes from the left tip i have video on my channel you can check it
@@Sker21 that is true. If you open up the exhaust, you can see that the air flow will go straight to the left one, and the air has to flow through dampening material to even go to the right exhaust tip. That is true lol. Also your car also has the very low idle which sound vaguely like a tractor, same here. But it sound nice with the fly by! Also, incredible sound on the subie! 😍
@@Stefstylezz thanks man. Also Did you weld the other exhaust tips on the remus or did you tight them up like the stock remus tips
@@Sker21 I have Simoni racing exhaust tips on there, they tighten with 3 screws to center them. But if you loosen them too many times, the screws will start to strip 🙈
hello, where did you buy the rear lights and if they are plug and play ?
www.concept-s.nl/alle-producten/verlichting-achter/swift-2010-2017/p-1/CS99947--led-bar-achterlichten-zwart-smoke-glas-suzuki-swift-sport-fz-nz-jan-2012-heden-met-led-knipperlicht.html And yes, they were plug and play. Do watch out with the rubber grommets where the cables go into the car, mine leaked afterwards. I had to put some caulking around the grommets and that fixed it. But it was a pretty easy change and it completely changed the look of the car!
kzread.info/dash/bejne/gI6VxK16hszIpLg.html you can also find an overview of the changes to my car, along with most of the links in the video I linked!
@@Stefstylezz a big thank you for the link and the advice, I'm also from Belgium that's why, very nice configuration in any case, good evening
What did the upgrades cost in total?
Really difficult to say haha. I'm gonna quote prices out of my head. 400 euros for the Remus muffler. 150 euros for the midpipe. 300 euros for the H&R lowering springs and afterwards 500 euros for the current voilovers. Also 250 euros for the rear lights, 50 euros for the led side blinkers. 150 for the rear spoiler. 1000 euros for the audio installation (front speakers and subwoofer in the trunk). 300 euros for the DTN intake. 100 euros for the carbon fibre coil cover and about 150 for the titanium heat shield over the headers. There are some miscellaneous things, but I think these are most prominent modifications. So in total not sure, a while ago I calculated at about 3000 - 3500, but now I'm not sure lol. Hope that helps, many links can be found on the video I made as an overview! That one is in my channel. Thanks for watching!
🥺🥺🥺🥺🐱🐈
i had a straight pipe remus twin sounded quite nice, raspy! ive often thought about a getting a single muffler though
Yes, with the Remus backbox, as well as with the Ulter Sport exhaust that I customised it sounds nice. There are a few single mufflers in Japan that seem to sound nice, but I don't think they would be legal in Belgium 😑 although this straight pipe is also technically not completely legal 😇😂