Пікірлер

• 
  @thoughtlesskills3 күн бұрын

  If you were closer to me You'd be the goto after a vid like this. Thank you.

• 
  @Gabriel.-_-.12 күн бұрын

  Your link above doesn't work

• 
  @mistervacation2312 күн бұрын

  niemand anders als dass er verrückt war und eine schlechte Nachahmung von Shemp darstellt

• 
  @ccollins179613 күн бұрын

  Laughable, the comparison with the pick up truck. That’s what’s wrong with America today. Everyone has to have heated seats, heated steering wheel…. Everyone is over financed and completely irresponsible with their spending. People used to pay cash for everything, live within there means. Now you are talking about tricked out tractors 😅 I guess we need to keep up with the neighbors even with tractors.

• 
  @landcruiser80126 күн бұрын

  Which is more use the 4 in1 or high dump? I need a bucket but can only afford 1. Im a landscaper. Have a small 5.5t truck which need to tip into. Thinking 4 in1 is more uses and can drop dirt over the side by opening the bucket?

• 
  @jeffnielsen4057Ай бұрын

  The problem with a three point hitch is that it maintains angle between the tractor and the planter (implement). So you guys adjusted that top arm, but as soon as the terrain changes, that upper arm needs to be adjusted again. For instance, if the front wheel of the tractor runs over a clod or a rock, it lifts the front of the tractor. The result is that the press wheel gets pushed into the ground. If the front of the tractor makes a dip, it would elevate the press wheel ..... and you lose your drive system because that wheel isn't in contact with the ground. All of this is a disadvantage for 3 point systems. Ideally, you use 3 point implements that don't touch the ground, like a sprayer.

• 
  @isaiahscott1902Ай бұрын

  Bobcat doesn’t have a diesel model lol 😂

• 
  @rogerhernandez4787Ай бұрын

  Thanks looks super easy to remove can you do a back hoe video I fight the unit take it off and especially putting it back on

• 
  @111mdshahed4Ай бұрын

  I am a new subscriber to your KZread channel. And I watched your whole video and it was very important for Haybale.

• 
  @shannonschneider8413Ай бұрын

  What engine is powering that tractor,sounds super cool

• 
  @robertglaspy6760Ай бұрын

  What is that attachment?

• 
  @2GUNMASTERАй бұрын

  Harley Rake?

• 
  @BillyBlaze7Ай бұрын

  Insuring a Tractor is a scam. You already on the hook to pay the loan if you default, buying insurance is a way to subject you to legalized extortion, all insurance that is "required" is legalized extortion. The only way this stops is stop buying items that require insurance. They pray on the poor and middle class, rich people do not pay insurance, they put money in an acct and make interest for it, as long as they can show theres money in an acct that covers the cost of whats required they dont pay....but YOU do.

• 
  @thoughtlesskills3 күн бұрын

  It's required only under a specific circumstance and it's not a government mandate like car insurance. I can't deny that for-profit insurance is awful but the idea of insurance isn't.

• 
  @BillyBlaze73 күн бұрын

  @@thoughtlesskills When I say legalized extortion I mean that its legal for the insurance company to extort it from buyers. As far as mandates its not a mandate to buy a tractor, but fat chance you will get financing if you dont agree to be extorted for insurance fees. Only the poor are targeted by these schemes, the rich can just pay cash and skirt it on tractor transactions.

• 
  @mikelangford1835Ай бұрын

  Is 819 at 24in on the fork, full extension, full height? If so what’s the comfortable work load? Thanks.

• 
  @noltspowerequipmentАй бұрын

  The bale weighed 819 lbs. As you can see on the video, we extended it to put it on the trailer. It lifted it easily.

• 
  @markdanford7714Ай бұрын

  Very well done

• 
  @noltspowerequipmentАй бұрын

  Thank you very much!

• 
  @schleppinghayАй бұрын

  I have an NS6010 with fully loaded tires and lifting a 2000 pallet lifted my rear wheels off the ground. How much ballast was on the back?

• 
  @noltspowerequipmentАй бұрын

  This one actually did not have any ballast on the back. But to be truly safe, we always recommend putting a counter weight on the rear 3 point hitch.

• 
  @jtarman70Ай бұрын

  I don't like how floppy that hood is when its raised, looks like weak hinges on back side of it

• 
  @bryan-th3xfАй бұрын

  nice

• 
  @OliverDiGeronimo0092 ай бұрын

  🤮🤮🤮 I hate Echo, but I would take that over Ego 🤮🤮🤮

• 
  @robmack1512 ай бұрын

  That was perfect

• 
  @noltspowerequipment2 ай бұрын

  Thanks! This trick has gotten us out of trouble many times!

• 
  @n5ifi2 ай бұрын

  I don't see any brush. You look up the word brush and you will find the word scrub vegetation. Then look up scrub vegetation and you will find what real brush actually is. That ain't brush. In fact, you actually bypassed the real brush and didn't cut it. That rotary cutter/brush hog is completely out of adjustment. How could I tell? The key was you were dragging all kinds of crap in the front corner of the hog but what iced it was at about 12:26 to 40 and beyond watch the brush hog tail wheel. Notice how its wobbly and going all over the place. That's a dead give away that there isn't enough weight on the tail wheel of the brush hog. The upper link is too tight for sure but the brush hog rear height may be out of adjustment too once you get the front up. If you tell me all that is adjusted exactly right and is a characteristic of that brush hog, I wouldn't own it. It absolutely shouldn't do that in a little bit of wet grass but you did the video in the wet to promote the flail mower over the brush hog anyway. Of course it would have been better for the mower if the grass was dryer but it still should not do what it did. I personally do not want the rear of my brush hog to be 4-5 inches higher than the front. That's wrong. You'll get a much better cut down around 2 inches higher. I'm 65 and I've been sitting in front a brush hog and sickle mower since before I could legally drive a car on the highway. Been there done that. I love watching salesmen try to be tricky dicky.

• 
  @noltspowerequipmentАй бұрын

  Thanks for the great feedback! We appreciate your honesty!

• 
  @ncanellos2 ай бұрын

  Just like mine ❤

• 
  @otto80492 ай бұрын

  I bought a Covington one row. Works good in my stoney soil.

• 
  @domading27592 ай бұрын

  Probably need something other than a lawn mower to run it

• 
  @domading27592 ай бұрын

  Looks like junk to me..

• 
  @DaveWitham-td8lj2 ай бұрын

  Could do without al the dam music

• 
  @sputnic782 ай бұрын

  Just like Kubota, another Bobcat built mower.

• 
  @AshworthPerformance2 ай бұрын

  Skip to 10:58 to miss the endless gab.

• 
  @ryanlgroff2 ай бұрын

  Both videos have 760i title.

• 
  @noltspowerequipment36642 ай бұрын

  So it shows the difference between having it in low versus high speed. They are both 760 machines.

• 
  @genewilliams74972 ай бұрын

  OMG!! The insanity of it all….. 😂😂😂. Well that’s 23 min and 4 seconds of my life that I will never get back……….

• 
  @mikemitchell44362 ай бұрын

  Any chance we could get a video on leveling the deck? I can tell you it ain't easy.

• 
  @bryansteen22192 ай бұрын

  I've heard that this can be installed on a rx7320

• 
  @noltspowerequipmentАй бұрын

  Yes it can be. We have done it in the past!

• 
  @hunterkautz22882 ай бұрын

  I need one… I’ll be the sales rep if I can have one for free

• 
  @danlynch65172 ай бұрын

  Awesome video with some great shots on the comparison of the two implements. There were many variables as you mentioned out in that field on the performance of both. However, in my opinion height of cut is one variable that was overlooked and not mentioned. Clearly the height of cut on the flail was set much lower to the ground than the rotary cutter.

• 
  @corystevens74262 ай бұрын

  I would get one if they had a mid mount mower still

• 
  @user-kb3zf3rj1b3 ай бұрын

  Super 👍💪

• 
  @noltspowerequipmentАй бұрын

  Thank you! 👍

• 
  @johndenver85743 ай бұрын

  Sounds like a jet engine.

• 
  @jamesward36223 ай бұрын

  I'm looking to get a tractor but have barely any credit. Is it possible to get financing with 50% down and no credit history

• 
  @noltspowerequipmentАй бұрын

  Most likely not, but if you could find a good co signer, there would be a better chance!

• 
  @SteveSnowman3 ай бұрын

  Nice. Thanks. Engineering with maintenance for the end-user in mind. - CK2620 -

• 
  @noltspowerequipmentАй бұрын

  You bet!

• 
  @Moselli563 ай бұрын

  I purchased a Kioti w cab which is fantastic and went through DLL to finance. Simple process but their website is absolutely pathetic!

• 
  @deborahstein3 ай бұрын

  The advantage of a gear drive Tractor is reliable consistent ground speed. This blends well with application of broadcasting fertilizers, seedling and even herbicides. If A given setting on a pto driven herbicide spray applicator applies X gallons of spray per hour and the crop requirements are Y per linear distance of Z then the ground speed of W must be consistently controlled to deliver the required amount. There's lots of mathematical charts and tables published by the manufacturers of the equipment and also the USDA. Nowadays the GPS and computer controls do all of the work for the Farmer.

• 
  @kennethconner52603 ай бұрын

  Nicely done!

• 
  @noltspowerequipmentАй бұрын

  Thanks!

• 
  @BossSwanger3 ай бұрын

  What is the top speed in low gear? I see high is listed at 10.7 mph

• 
  @mr50393 ай бұрын

  I really appreciate these videos guys. Thank you!

• 
  @noltspowerequipment3 ай бұрын

  Our Pleasure! Let us know what else you want to see!

• 
  @robmack1513 ай бұрын

  Great advice

• 
  @noltspowerequipment3 ай бұрын

  Thanks for the feedback!

• 
  @nkraemer3 ай бұрын

  where can I buy this bucket? Link? for a 755i

• 
  @Tableaux153 ай бұрын

  You should have shown it running to get an idea of how loud it operates

• 
  @nkraemer3 ай бұрын

  what 4-in-1 bucket is this? Who makes it?

• 
  @noltspowerequipmentАй бұрын

  These are built by a local weld shop.

• 
  @mikelyons704 ай бұрын

  Thank You

• 
  @mr50394 ай бұрын

  I have one and didn’t know this was possible!

• 
  @noltspowerequipment3 ай бұрын

  That's cool isn't it!