Пікірлер

• 
  @BouladjerafSmaine4 күн бұрын

  from Algeria thanks for sharing your precious knowldge sincerly your kindness appear and obvious through your soft voice you're so generous god bless you from my deep heart i applogize for my bad english

• 
  @IrvinJohnYumang15 күн бұрын

  THANKSU

• 
  @IrvinJohnYumang15 күн бұрын

  THANKSU

• 
  @chris-non-voter16 күн бұрын

  Design assistant is a very poor piece of software. It's OK for small jobs, but if you have large assemblies, it is very time-consuming. "YOU HAVE TO RENAME EACH PART SEPARATELY." There are also pitfalls. I always just use copy, rename the copy, and then move the new copies from the folder into a new folder. Be careful if you pack and go then rename, because the parts you rename in the pack and go folder are not renamed the original parts in the original folder are renamed unless you change the path every time you rename a part. This is never explained in tutorials....

• 
  @Hagerman8 күн бұрын

  Thank you for the feedback. This is what we need to know to make this software better

• 
  @MrFastFarmer22 күн бұрын

  Shame 4th axis support is so weak, and nothing in Inventor cam has changed for years.

• 
  @Mancavedweller124 күн бұрын

  At 43:23 you said you're the only software in the market that has adaptive clearing. Pretty sure the old Mastercam X4 had started using this.

• 
  @Hagerman24 күн бұрын

  Thank you for the clarification!

• 
  @kanthancrazy28 күн бұрын

  Thank you Sir 😊

• 
  @mohdsofian-r7j28 күн бұрын

  Hello Sir... can you explain to crate insulation pipe including tagging same in you pnid drawing...

• 
  @Hagerman27 күн бұрын

  Could you give a little more detail on this question?

• 
  @MrCadongpa29 күн бұрын

  I see that some descriptions are not populated, how do you fix that to show

• 
  @Hagerman27 күн бұрын

  Could you give some more detail on this question?

• 
  @wmgmusic11129 күн бұрын

  very thorough! thank you.

• 
  @subashkrishnan9371Ай бұрын

  Tq bro

• 
  @selinajeromeАй бұрын

  Very well and in detail explained. Worked on AutoCAD Electrical for 4 years but some of the things I learnt today to reduce the extra work. Thank you so much !!

• 
  @HagermanАй бұрын

  Glad it helped!

• 
  @CJ-nk1tkАй бұрын

  Thank you very much. You have helped me.

• 
  @brandonlosheАй бұрын

  Thanks for the video. Is there a preferences options where you can customize the left > right window selection to function the same way as the right > left window selection?

• 
  @saujanyakocharekar1206Ай бұрын

  in the icon menu wizard part - how do you created that .dat file (vandelay_schematic.dat) ?

• 
  @MeysamMirzaei-mr1qzАй бұрын

  It´s an old video and i dont know if there is anyone to answer. i have a problem with matching Bolts and flanges. In DIN standard we have different types of flanges. I want to set three different types in one Pipe Class. I want to know how can i set a flange with correct Collar ring and correct boltset.

• 
  @Hagerman_brettbarkmanАй бұрын

  After adding all the desired bolt sets to a spec, you would set the Part Use Priority for each pipe size to get a particular set with a flange. Also, after placing a flange, you can use the substitute feature to swap between bolt sets. But using Part Use Priority in the spec sets one as the default. Hope this helps.

• 
  @MeysamMirzaei-mr1qzАй бұрын

  @@Hagerman_brettbarkman Thank you for your fast response. I knew this method. The problem is that we are a great design team and i am not sure that all the teammates do it correctly later. It seems there is no other way. 🙏

• 
  @bearrabbit-gl8scАй бұрын

  in infraworks 2022, 2023, the lane markings (right turn arrow) only work for US roads. for UK or any other left side roads, i couldnt find anything to make the arrows on the left side of the road. is there a solution to this?

• 
  @HagermanАй бұрын

  It’s true that in InfraWorks, the default lane markings (such as right turn arrows) are primarily designed for US roads. There may be a Great Britain package, but if not ⬇ However, there are workarounds to create custom lane markings for other regions: 1. Import Polygonal .shp Files: o You can import polygonal .shp files as coverage areas. o Style these areas in white or yellow to represent lane markings. o Keep in mind that coverages will snap to the terrain elevation by default, so you might need to adjust offsets to position them above the road surface. 2. Create Lane Markings in Other Programs: o Use programs like Civil 3D, AutoCAD, or 3ds Max to create the desired lane markings. o Export them as meshes. o Import the custom lane markings into InfraWorks. 3. Modify Lane Markings on a Component Road: o In InfraWorks, select a component road. o Right-click the road and choose Pavement Markings > Modify Lane Markings. o Adjust the lane markings using the in-canvas tools.

• 
  @AukageАй бұрын

  I'm only just finding your video now. Pretty good. I've been limping along trying to find documentation on Python programming for Plant 3D. For example, the parameters can accept an Ask4Dist=True/False value, but it's not documented anywhere I've found. Your demonstration included use of the setPoint method, and I've somehow found a setLinearDimension method as a means of having a movable point on-screen to update Python parameters. No good documentation on this. There's sparse information on using Custom versus Parametric ComponentDesignations. I have programming successfully supports and piping components, but all parameter-driven. I'm trying to find means of, for example, reading a flange-thickness from an existing or connecting part, when placing and drawings studs. I know that this is not out of box, but, the length required for a stud is being determined at some level when parts are being place. I'm trying to replicate and/or replace the out of box method. Any feedback is welcome.

• 
  @Hagerman20 күн бұрын

  Thank you for your comment and for watching our video! We're glad you found it helpful. We understand that documentation for Python programming in Plant 3D can be challenging to find, especially for specific features like Ask4Dist, setPoint, and setLinearDimension methods. For detailed and specific inquiries like yours, we would have you reach out to our support team. Here is a link: www.hagerman.com/training-support/support

• 
  @OSpics2 ай бұрын

  Great. Thnx

• 
  @FilipSimek-jz8hb2 ай бұрын

  Hello, after using the Design assistant, a big inconvenience happened to me. (I renamed one part of the assembly in DA) Since then, when I open this assembly in Inventor, all the references are lost, if I determine them again and show him where the referenced files are and save it, then when I open the assembly again, the references are missing again . I'm really desperate. Confused Any information on this problem would help me. Thanks for the tips, experience, knowledge on this issue.

• 
  @Hagerman8 күн бұрын

  We're sorry to hear that. Here is our support page, just send us a detailed message on what is wrong and we will try to help you out! www.hagerman.com/contact

• 
  @dbvetter74852 ай бұрын

  Can use use Inventor 2025 with vault server 2024. I don’t think so but try to answer an employee.

• 
  @Hagerman2 ай бұрын

  Vault only supports the same level of CAD or within two releases back. Vault 2024 only supports CAD 2024, 2023, and 2022. Vault 2025 only supports CAD, 2025, 2024, and 2023.

• 
  @Brento622 ай бұрын

  Point filters would be nice for new folks to know…

• 
  @Hagerman2 ай бұрын

  Thank you for the suggestion! We will let you engineers know and it may be another tip that will come out soon!

• 
  @mustafah.allawi34592 ай бұрын

  👏

• 
  @defiverr46972 ай бұрын

  Never knew how to use the quick option. Now i do. Tnx.

• 
  @Hagerman2 ай бұрын

  Happy to help!

• 
  @saichinta12163 ай бұрын

  Hi is it possible if you can share the PPT you shown

• 
  @2010quintana3 ай бұрын

  Exellent

• 
  @Abdullahsharijah3 ай бұрын

  it was not so, useful just it contained shapes

• 
  @user-gn6vs6kj1j3 ай бұрын

  Thanks, Its extremely useful for a scheduler to generate 4D/5D schedules. Just a quick check, do we need Navis work Autodesk license to work on this as the Navisworks Freedom 2024 version doesn't shows options of adding tasks

• 
  @Hagerman8 күн бұрын

  Navisworks Freedom 2024 is a free viewer and doesn’t require a license to use, but if you need to perform tasks beyond just viewing, such as model coordination, clash detection, or other advanced features, you will need a licensed version of Autodesk Navisworks. For more detailed information or support, please visit our website: www.hagerman.com/contact

• 
  @OnyekachukwuNwani-mj9ph3 ай бұрын

  Thank you so much for this video. It's been very immensely helpful.

• 
  @Hagerman3 ай бұрын

  Glad it was helpful!

• 
  @OnyekachukwuNwani-mj9ph3 ай бұрын

  I am currently a mechanical maintenance technician with a process company in Nigeria. In March, last year, I lost a very good mechanical process piping engineer trainee job opportunity simply because I had no knowledge about AutoCAD drawings at all. I am currently training myself in AutoCAD drawings on youtube and today, i am pretty versed with 2D and 3D AutoCAD drawings, command tools e.t.c. Right now, I am trying to train myself to becoming a mechanical process piping designer/engineer. How relevant is blocks, especially dynamic blocks to the drawing and modelling activities of a piping designer/engineer. I just want to be sure that I am on the right path and that my efforts at learning and understanding the concept of dynamic blocks will be very expedient and handy in piping and equipment designing and modelling, quotations, routing e.t.c. because that's my end goal. Please, If you have advice or videos that will help me easily and quickly achieve this goal of mine, please help me with them and I will very most grateful for the assistance. Thanks!

• 
  @Hagerman3 ай бұрын

  @@OnyekachukwuNwani-mj9ph For any industry that uses symbology to convey information, such as the piping or electrical or civil industries, AutoCAD Blocks streamline the drawing production by treating a group of objects as 1 entity. This eases selection, placement, mass editing, etc of the unified object(s). Dynamic Blocks can be used when multiple configurations such as size changes, design or status changes (open valve vs closed valve), or positional changes are considered.

• 
  @OnyekachukwuNwani-mj9ph3 ай бұрын

  @@Hagerman Ok. Thanks a million!

• 
  @backtoafrica8953 ай бұрын

  Fantastic

• 
  @defiverr46973 ай бұрын

  I just got a lot faster . Didn't know this. Thanks.

• 
  @Hagerman3 ай бұрын

  Glad we could help!

• 
  @backtoafrica8953 ай бұрын

  ❤

• 
  @backtoafrica8953 ай бұрын

  This was a great video event for some " expert"

• 
  @shekoofehvaheddehkordi42253 ай бұрын

  Great and thanks

• 
  @jorgesingle4 ай бұрын

  Great tutorial thanks for sharing!

• 
  @Anilkumar-ir5mw4 ай бұрын

  how to link standalone connector with parametric connector with out error

• 
  @LoesVerhoef4 ай бұрын

  Can you adjust Radius of bendings in a step model?

• 
  @Hagerman4 ай бұрын

  You can, if you use the direct edit commands, or delete the geometry, then use the Bend command to rebuild the bends.

• 
  @parikshit134 ай бұрын

  i cant find this CONTENT tool in my cad2024

• 
  @Hagerman8 күн бұрын

  Click this link so we can help you get the AutoCAD Mechanical Toolset into your AutoCAD 2024: www.hagerman.com/software/autocad-mechanical

• 
  @defiverr46974 ай бұрын

  Easier CL in Autocad Mechanical.

• 
  @LawatheMEid4 ай бұрын

  Hi, i have inventor 2016, and cfd 2016 .. that is what available for me .. i could not find any link for autodesk nastran 2016!! .. i found free downloads for autodesk nastran 2017, 2018, 2020, 2021 but i need the 2016 version. Any help here.

• 
  @the_drone_co4 ай бұрын

  Hey there, great video. 23:00 mark, how do you add running dimensions. I get they're on the part drawings but want to show on Assembly drawing. Thanksin advance.

• 
  @kama0808804 ай бұрын

  Thank you, its a superb and knowledgeable video, i was really struggling with Python in Autocad, but understood most of the steps through this video. great descriptive video.

• 
  @KhanhTran-ee4bb4 ай бұрын

  Hardest intro ever

• 
  @duybinh60474 ай бұрын

  you save my life

• 
  @user-fe7sr2dc2m4 ай бұрын

  Great Video , I make the training on student version, when I make the new folder and copy and drag , the advance steel program is closed , Please advise.

• 
  @Hagerman8 күн бұрын

  Could you give a little bit more detail on the issue?

• 
  @roldanduarteholguin71024 ай бұрын

  Use AutoCAD Plant 3D to convert Video into C&I and P&I Diagrams

• 
  @gayaneazaryan69374 ай бұрын

  great!!!!!

• 
  @feouellette4 ай бұрын

  I've done it before. But currently having a very hard time selecting the cyan data fields. Just can't seem to select them.......update...figured it out. Had to turn off "Selection Cycling"

• 
  @PipingDesignCentral4 ай бұрын

  App seems to load correctly but then I get AutoCAD message: The Hagerman & Company File Not Found: pid-tools_Hagerman_Webinar.fas

• 
  @madanchand27295 ай бұрын

  How do you get the bend lines in inventor nesting as well as bending text details? How do you change and control the layer? This is just a simple example of how to do nesting.

• 
  @Hagerman4 ай бұрын

  That capability isn’t available in the toolset, at least none that our expert can find. The exported objects don’t have bend data within them.

• 
  @eternals51015 ай бұрын

  Thanks for valuable information. Please make one more viodes on meridian on showing how to create project and changes and complete workflow to make the drawing to effective to master

• 
  @Hagerman5 ай бұрын

  We will recommend this as a topic for a new webcast! Thank you!