Watch @repairchannel 's video for another teardown and repair of the same issue. kzread.info/dash/bejne/aI1rltycfs7MdKQ.html If I would do this again I would probably use some alcohol and cue tips, don't use too harsh an abrasive material like I did, which I knew at the time but was all I had around.. While my repair worked, it didn't last too long because the scuffed up nature of my rotor probably meant it was wearing down the brushes at a rate of knots..
@repairchannel8 күн бұрын
Hi Niels, thank you for posting this. I fixed my magimix blender which had the same problem and your video did help a lot. I was able to remove the coupler eventually, but it took way more effort than should have been necessary. You might want to check out my video of the whole process by clicking on my icon. Thanks!
@NielsHeusinkveld8 күн бұрын
Thanks! I'll put a link to your video in the description. The prices you got quoted by MagiMix aren't even THAT bad (compared to like $500 to fix the charging port on a macbook.).. But of course they do the nonsense argument that you need special tools, and it is unsafe, and many kittens will die.
@repairchannel8 күн бұрын
@@NielsHeusinkveld Haha, indeed. Thanks for including the link to my video! I will do the same.
@roman935011 күн бұрын
Crazy shit. It worked. Thank you hhahaha
@crashesandsimracinggg691611 күн бұрын
ya no esta disponible el link?
@omadamsma438318 күн бұрын
I blought my 6230 in 2005 used it every day change the battery 2 times changed the screen 1 time and repair the power button 2024 its still working 😁
@MunchYoutube19 күн бұрын
Are you dutch?
@NielsHeusinkveld18 күн бұрын
What gave it away! :D
@AirCraftCaptain22 күн бұрын
I am researching steering design for FSAE vehicles and this is an incredible video. Thank you for this.
@NielsHeusinkveld22 күн бұрын
Thanks! There should be some tire data available for most FSAE tires, so you should have some idea of aligning torque. I would absolutely try to make a mathematical model with the trail, pneumatic trail but also jacking if you are going to use some real caster and scrub radius. Steering loads can be quite high on a FSAE car, because of how fast the steering rack tends to be made.
@GravideckMotionSystems24 күн бұрын
Very interesting take. It all makes sense from a physics standpoint. I have developed a non-conventional motion system that uses translation for transient accelerations, and the inertial cues are all spot-on. No inverse cues whatsoever.
@FriendlyPCGamers27 күн бұрын
This is complete bullshit honestly. I can only laugh at it, not copy it. Something which don't apply to real engines, must not apply to SIM games at all. What you are trying to achieve is called tuning/modding the parameters, if your pedal will interact with car acceleration due to software inputs, giving different results, it might end up like AMD Drivers. Be it 25 years old model of acceleration or 250 year old model, if Pedals have to open air to pass more fuel to engines that pistons can move and crankshaft does its work, hence acceleration happens (in Fuel bases engines not Electric motors) then it should be like that. Everyone gets same result then it should be like that. If you come with STATS and DATA about how real cars accelerate, with the charts and it differes with the above data then its the DEVS of all games at fault, if it matches then you are at fault.
@qorrri28 күн бұрын
I would love to drive this car in AMS,is it available somewhere for download,i cant find it
@TiltEVАй бұрын
Cool! Kart Racing Pro surprisingly hit all time high player count in June 2024, I'm guessing mods are getting stronger. Might cop it this Steam sale.
@jayvanburg3943Ай бұрын
Loved GeneRally a lot. Never really worried too much about the second one...no idea why
@leduc7804Ай бұрын
Everyone’s workplace should be this much fun 🎉
@jayvanburg3943Ай бұрын
Yeah, pulling away from a stop is where you really feel the difference between real life and sims. It just feels really off, It boggles the mind how something everyone does every day is not represented more realistically. It does the job but that is about as far as it goes. To experiment just get someone who has never driven a sim and see how they pull away from the pits. It feels alien to what everyone is used to in their daily cars.
@SimracingArnoutАй бұрын
Thanx!
@SimracingArnoutАй бұрын
Gezien! Dankje Niels
@thedude4795Ай бұрын
Since race department changed to overtake i guess theres a lot of time over
@dennisfritz3608Ай бұрын
Holy Moly You Are!😂
@aldyrinc6870Ай бұрын
Only one point of contact modeled on white ball.
@Rave-agentАй бұрын
Playing with yourself again?
@therealmudafuka7200Ай бұрын
I am so glad I subscribed
@Wib0Ай бұрын
ssssssiiiiick
@doric_historicАй бұрын
Can you Excel spreadsheet a game of pool?
@StuntpilootStefАй бұрын
If there is anybody in the world that can, it's Niels. If he can't do it, it's impossible.
@cancrackerАй бұрын
Amazing
@TheGravyMonsterАй бұрын
He calculated that move ahead of time using 3 spreadsheets
@f3rny_66Ай бұрын
I guess I have zero original toughs because I was going to write something similar
@Cbss12Ай бұрын
hacked the grip levels
@valter_vava74Ай бұрын
CGI does wonders nowadays with an empty table...
@ebernhards3Ай бұрын
Calculated!! On skill and pace alone!
@Gean...de...OliveiraАй бұрын
I might be completely wrong. But in my opinion it feels like Kart Racing Pro is deliberately understeery because it's too hard to drive an oversteery kart in the game. Maybe the force feedback is not good enough. Or maybe I'm not good enough. Because I always find myself spinning when driving a oversteery Kart in the game. It's too hard to see it coming fast enough to not spin for me. Physics feel great, but it's VERY hard to handle the Kart In the other hand, it looks like KartKraft does the opposite. It is deliberately oversteery. That's why it feels so realistic, because in real life Kart racers barely turn the wheel, they just control the Kart rotation. It looks almost "arcadish" how easy it is to run such a loose Kart. But I might be completely wrong, as that's just my impression. I've never raced in a racing Kart or played KartKraft. 🤔
@Gean...de...OliveiraАй бұрын
I just would like to add that, overall, KartKraft is probably the best game by far as it looks better, sounds better, the tracks are laser scanned etc. And let's say I'm right and the game is a bit "arcadish". In the end it kinda adds to the realism as well, because it helps you feel like you're in a real kart without being actually in one, feeling the whole thing with your entire body. 👍
@LurgsHowToGuidesАй бұрын
Geoff Crammond what a genius 👍
@cherriosbee475Ай бұрын
How do you remove it when I had installed the wooden panels on the wrong side.
@NielsHeusinkveldАй бұрын
I have multiple replies to other posts asking the same, no need to even scroll very far..
@rc-fannl7364Ай бұрын
Nice to see a classic set getting another creative alternate build
@StuntpilootStefАй бұрын
This is the kind of excitement you just don't get anywhere else!
@saren6538Ай бұрын
sim car is too static is there a way to make is shake about a bit more ?
@chrisprobert6Ай бұрын
Haha , made me think of lotus123, and rapidfile.😂
@Arkham_UKАй бұрын
Yeah boi !
@murfenator82Ай бұрын
Niels: NerdInventingExcelLargeSpreadsheet
@femkeligtvoet8896Ай бұрын
Is it possible to learn this power?
@NielsHeusinkveldАй бұрын
I'm currently about 5% on my way to the definitive physics spreadsheet. It has to write lots of files, so I was testing a few ways to write to my SSD using VBA. I expected maybe a few megabytes per second. I was not expecting it to write faster than a mechanical hard drive can keep up with! I would need 2.5 gigabit network to allow for such speeds over a network! Great! Also, useless. Computing the actual physics parameters and text files takes far longer than this. So even when I will be saving 1000 cars at once, the % time saved by writing this quickly won't be very dramatic. Still cool though, says... nobody.
@jbassguy571Ай бұрын
I ran this on a 386dx40 and i turned most detail off hehe. I played it with a Gravis joystick and it worked fine. Such a great game. Back then 25fps was normal and the resolution didn't look bad on a 14 inch monitor. Fond memories.
@RavenL1337Ай бұрын
this is an very lazy and missleading video, literaly you can eliminate the bubbles in the AIO pump by not puting the radiator below the pump !!!
@311superfly2 ай бұрын
Steering wheel no motion. Lame or is it turned off for improved frame rate,,?
@NielsHeusinkveld2 ай бұрын
It is always static. The cockpit is a 2D image, not a 3D model that can rotate as we have gotten used to some years after this game came out.
Пікірлер
I have one working OK in 2024😅
Watch @repairchannel 's video for another teardown and repair of the same issue. kzread.info/dash/bejne/aI1rltycfs7MdKQ.html If I would do this again I would probably use some alcohol and cue tips, don't use too harsh an abrasive material like I did, which I knew at the time but was all I had around.. While my repair worked, it didn't last too long because the scuffed up nature of my rotor probably meant it was wearing down the brushes at a rate of knots..
Hi Niels, thank you for posting this. I fixed my magimix blender which had the same problem and your video did help a lot. I was able to remove the coupler eventually, but it took way more effort than should have been necessary. You might want to check out my video of the whole process by clicking on my icon. Thanks!
Thanks! I'll put a link to your video in the description. The prices you got quoted by MagiMix aren't even THAT bad (compared to like $500 to fix the charging port on a macbook.).. But of course they do the nonsense argument that you need special tools, and it is unsafe, and many kittens will die.
@@NielsHeusinkveld Haha, indeed. Thanks for including the link to my video! I will do the same.
Crazy shit. It worked. Thank you hhahaha
ya no esta disponible el link?
I blought my 6230 in 2005 used it every day change the battery 2 times changed the screen 1 time and repair the power button 2024 its still working 😁
Are you dutch?
What gave it away! :D
I am researching steering design for FSAE vehicles and this is an incredible video. Thank you for this.
Thanks! There should be some tire data available for most FSAE tires, so you should have some idea of aligning torque. I would absolutely try to make a mathematical model with the trail, pneumatic trail but also jacking if you are going to use some real caster and scrub radius. Steering loads can be quite high on a FSAE car, because of how fast the steering rack tends to be made.
Very interesting take. It all makes sense from a physics standpoint. I have developed a non-conventional motion system that uses translation for transient accelerations, and the inertial cues are all spot-on. No inverse cues whatsoever.
This is complete bullshit honestly. I can only laugh at it, not copy it. Something which don't apply to real engines, must not apply to SIM games at all. What you are trying to achieve is called tuning/modding the parameters, if your pedal will interact with car acceleration due to software inputs, giving different results, it might end up like AMD Drivers. Be it 25 years old model of acceleration or 250 year old model, if Pedals have to open air to pass more fuel to engines that pistons can move and crankshaft does its work, hence acceleration happens (in Fuel bases engines not Electric motors) then it should be like that. Everyone gets same result then it should be like that. If you come with STATS and DATA about how real cars accelerate, with the charts and it differes with the above data then its the DEVS of all games at fault, if it matches then you are at fault.
I would love to drive this car in AMS,is it available somewhere for download,i cant find it
Cool! Kart Racing Pro surprisingly hit all time high player count in June 2024, I'm guessing mods are getting stronger. Might cop it this Steam sale.
Loved GeneRally a lot. Never really worried too much about the second one...no idea why
Everyone’s workplace should be this much fun 🎉
Yeah, pulling away from a stop is where you really feel the difference between real life and sims. It just feels really off, It boggles the mind how something everyone does every day is not represented more realistically. It does the job but that is about as far as it goes. To experiment just get someone who has never driven a sim and see how they pull away from the pits. It feels alien to what everyone is used to in their daily cars.
Thanx!
Gezien! Dankje Niels
Since race department changed to overtake i guess theres a lot of time over
Holy Moly You Are!😂
Only one point of contact modeled on white ball.
Playing with yourself again?
I am so glad I subscribed
ssssssiiiiick
Can you Excel spreadsheet a game of pool?
If there is anybody in the world that can, it's Niels. If he can't do it, it's impossible.
Amazing
He calculated that move ahead of time using 3 spreadsheets
I guess I have zero original toughs because I was going to write something similar
hacked the grip levels
CGI does wonders nowadays with an empty table...
Calculated!! On skill and pace alone!
I might be completely wrong. But in my opinion it feels like Kart Racing Pro is deliberately understeery because it's too hard to drive an oversteery kart in the game. Maybe the force feedback is not good enough. Or maybe I'm not good enough. Because I always find myself spinning when driving a oversteery Kart in the game. It's too hard to see it coming fast enough to not spin for me. Physics feel great, but it's VERY hard to handle the Kart In the other hand, it looks like KartKraft does the opposite. It is deliberately oversteery. That's why it feels so realistic, because in real life Kart racers barely turn the wheel, they just control the Kart rotation. It looks almost "arcadish" how easy it is to run such a loose Kart. But I might be completely wrong, as that's just my impression. I've never raced in a racing Kart or played KartKraft. 🤔
I just would like to add that, overall, KartKraft is probably the best game by far as it looks better, sounds better, the tracks are laser scanned etc. And let's say I'm right and the game is a bit "arcadish". In the end it kinda adds to the realism as well, because it helps you feel like you're in a real kart without being actually in one, feeling the whole thing with your entire body. 👍
Geoff Crammond what a genius 👍
How do you remove it when I had installed the wooden panels on the wrong side.
I have multiple replies to other posts asking the same, no need to even scroll very far..
Nice to see a classic set getting another creative alternate build
This is the kind of excitement you just don't get anywhere else!
sim car is too static is there a way to make is shake about a bit more ?
Haha , made me think of lotus123, and rapidfile.😂
Yeah boi !
Niels: NerdInventingExcelLargeSpreadsheet
Is it possible to learn this power?
I'm currently about 5% on my way to the definitive physics spreadsheet. It has to write lots of files, so I was testing a few ways to write to my SSD using VBA. I expected maybe a few megabytes per second. I was not expecting it to write faster than a mechanical hard drive can keep up with! I would need 2.5 gigabit network to allow for such speeds over a network! Great! Also, useless. Computing the actual physics parameters and text files takes far longer than this. So even when I will be saving 1000 cars at once, the % time saved by writing this quickly won't be very dramatic. Still cool though, says... nobody.
I ran this on a 386dx40 and i turned most detail off hehe. I played it with a Gravis joystick and it worked fine. Such a great game. Back then 25fps was normal and the resolution didn't look bad on a 14 inch monitor. Fond memories.
this is an very lazy and missleading video, literaly you can eliminate the bubbles in the AIO pump by not puting the radiator below the pump !!!
Steering wheel no motion. Lame or is it turned off for improved frame rate,,?
It is always static. The cockpit is a 2D image, not a 3D model that can rotate as we have gotten used to some years after this game came out.