very professional done every word crystal clear keep up the great work
@DonBoninКүн бұрын
When in the DOS cmd window and you are typing a path or file name, TAB is you best friend - it's basically auto complete based on the text you're typing.
@biegebythesea6775Күн бұрын
i need to do it but actually my trees are dead so i was going to just saw it. I don't want to destroy the pot, though!!! i have good pots. don't want to destroy them. i need to destroy the already dead plant.
@ezzd42556 күн бұрын
Thank you
@ezzd42556 күн бұрын
Very good
@ezzd42558 күн бұрын
Awesome!!!
@KrisKasprzak6 күн бұрын
Glad I could help
@ldballoon411 күн бұрын
thanks
@victororo46212 күн бұрын
Ever think of making these display the information of bat chirps?
@lzh313114 күн бұрын
Thank you for making this video. The visual aids and explanations were extremely helpful in helping me better understand this problem. Your explanation and showing how to adjust the dampers was extremely informative. This video might be 9 yrs. old, butter the information you provided is very relevant today. Thank you very much.😊👍👍👍
@KrisKasprzak12 күн бұрын
glad I could help.
@dennismoore111614 күн бұрын
Good info, knew high Merv ratings choked air flow, didn't think of 4 inch filters. BTW, here are some of the numbers for Honeywell filters that fit 1 inch frames 4 inches thick. Pricy, but last 4 times as long so overall about the same cost. Honeywell FC40R1094 12x12x4 FC40R1037 12x24x4 FC40R1078 24x24x4 You can search for your size with Honeywell and FC which will turn it up. They make many sizes as well as some that are 3 inches thick. Filterbuy also make some 4 inch thick filters for one inch frame.
@KrisKasprzak12 күн бұрын
Thanks for the info!
@irish8905515 күн бұрын
Fret?....
@jeanicezinho17 күн бұрын
amazing my friend, just one question, u library works on E220-900T22D too? thz 4 all!
@cyberphox121 күн бұрын
Nice, just starting out with ESP32 👍
@KrisKasprzak19 күн бұрын
Have fun!
@florencedieu998221 күн бұрын
I found out because I have a Mac.
@florencedieu998221 күн бұрын
I think divshare link isn’t working anymore do you have another sources thank you.
@KrisKasprzak21 күн бұрын
Check out the link in the description I’ve recently tested it and it works
@florencedieu998220 күн бұрын
Thank so much Kris I finally got the driver and the program running. When it read my eeprom it had all ff. I try to program it but it won’t program. It just go back to where it had all gf. Any ideas thank you Kris.
@mariaviklund454623 күн бұрын
Copied the code and tried it but the ball stays in display one. Hmm
@KrisKasprzak23 күн бұрын
On the back of each display, what is its address?
@mariaviklund454623 күн бұрын
@@KrisKasprzak One is set to 0x3C and the other is 0x3D. The text shows up correctly for display 1 and 2 but the little ball stays in display 1, looping around.
@jumbo99961424 күн бұрын
disableCore1WDT(); gives error. Where do you put the code for this function?
@KrisKasprzak24 күн бұрын
that code may not work on all ESP32's just comment it out. It disables the watchdog timer.
@jumbo99961424 күн бұрын
@@KrisKasprzak Thank you.
@gummypanda789725 күн бұрын
14 years later and I'm using this tutorial😂
@KrisKasprzak23 күн бұрын
Glad it still helps
@ipage126 күн бұрын
Amazing ! I have a £300 , 3 metre tall birch tree being delivered next week - this has stopped the fear !
@KrisKasprzak25 күн бұрын
Glad I could help, sounds like you have a really really nice tree you’re about to plant
@javimelendez41427 күн бұрын
What if hardly any air gets to the room on the 2nd floor from furnace located in basement?
@robwray356329 күн бұрын
This video was very helpful. It was refreshing to find content that is concise and clearly directed. Instructional videos of this caliber set a standard for educational content. Additionally, the absence of text-to-speech narration and background music enhanced the clarity and quality of the presentation. Thank you for your excellent work!
@KrisKasprzak25 күн бұрын
I appreciate your very positive comments
@alexandreleblanc3174Ай бұрын
Im not sure what im not doing right, i have installed all the library but when i try to compile the program i always get same error 'Arial_16' was not declared in this scope
@KrisKasprzakАй бұрын
What MCU are you using?
@alexandreleblanc3174Ай бұрын
@@KrisKasprzak A mega 2560 from elegoo. was trying to just have the code compiled to prove it has everything it need to work than try to modifiy the code to make it work with the h8357D
@alexandreleblanc3174Ай бұрын
@@KrisKasprzak what i would like to do is have a graphic show the lst 24H of data and go to a new page every day, trying to make a air purifier with a particulate sensor, so your code seems like i could do that with it if i make a few modification.
@freedompioneer4311Ай бұрын
Where did you lift the rear of the car that high. The Google suggests to read tow hitch that protrudes from by the gas tank
@giashafer1330Ай бұрын
OMG my car is a 2005. I doubt it's ever been changed 😮😂. Doing this today!
@jameslyons6196Ай бұрын
Great video Kris, could you hint as to where you got this funnel and pipe kit from because my carbon came alone in a box.
@KrisKasprzakАй бұрын
I got all my stuff from pelican water back when they were in business. Maybe US water systems has parts?
@jameslyons6196Ай бұрын
@@KrisKasprzak Kris thank you, I'll try that to see what they have.
@pingchouchen6178Ай бұрын
Sorry to bother you, I would like to ask if the code in the video can be used for 2.4 inch ILI9341 320*240. If it could work what modification details should I pay attention to ? Looking forward to your reply T_T
@KrisKasprzakАй бұрын
I have a library for Adafruit_ILI9341 displays. It has and example for and ESP32 but that same example can be used for other boards. Have a look github.com/KrisKasprzak/Adafruit_ILI9341_Controls/tree/main
@nadirlaib-ou8iqАй бұрын
how can i add background image in supermon.h arduino code
@jj4996Ай бұрын
do you ever do anything with the other tank? How long does that one last?
@KrisKasprzakАй бұрын
According to the manufacturer, there is no maintenance required on the salt-free conditioner. You will need to replace the media in the curb and filter every five years.
@Bliz0516Ай бұрын
Great video Inwas wondering what supermon does in this?
@KrisKasprzakАй бұрын
It is simply a .h file that lists the HTML and JavaScript code
@doreymorre6035Ай бұрын
🙏 P r o m o s m
@benmahmoudanwar5196Ай бұрын
please the Ebyte library can work with the E49-400T20D on esp32 exemple ??
@KrisKasprzakАй бұрын
this library should be able to program the E49, see the example ESP32 folder. However you will need to specify 0 for each of these (as they are unsupported): .SetPullupMode .SetWORTIming .SetFECMode
@JohnJCoutureАй бұрын
Great Video, Thank you.
@KrisKasprzakАй бұрын
Glad you liked it.
@lohikarhu734Ай бұрын
Everything looked great, until .... *.EXE * .... A PC! ARGHHHH !! any other way to build the bitmap on Mac or Linux? Even without that, good baseline... And, with 16M of flash, even 512K on F411, a few fonts could be doable. Thx!
@KrisKasprzakАй бұрын
I did not write the font convert too, i'm only showing how to use it.
@vivianvo8819Ай бұрын
Do you have a more simplified version of component grouping for interferences between moving parts? thanks
@Gino_567Ай бұрын
Code doesn't compile. again, another video on the subject with the same issues. why did you make a video and include code if it doesn't work? People are trying to follow along.
@KrisKasprzakАй бұрын
Compiles just fine for me… Maybe it’s… You…
@thelevophedАй бұрын
So you could use this to generate the IL code, then convert to HTML using GPT4?
@KrisKasprzakАй бұрын
No idea.
@Popart-xh2fdАй бұрын
Doesn't Arduino Uno and Nano has only one serial port? How do you initiate two distinct serial communications then?
@KrisKasprzakАй бұрын
use software serial for the EBYTE, you can still program with the USB port
@jag4762Ай бұрын
Have you made a Night Lapse tutorial with reference to the post editing you can do?
@husky-nu3xkАй бұрын
Hi Kris! Great work. Thx. I’ve been using your library for a while. Wonder is I can use it for point to point communication instead of transparent?
@KrisKasprzakАй бұрын
This library is intended for programming these units only while there is a method to send and receive it simply calling serial.read and serial.write
@AF-YouTubАй бұрын
No place to click to download. Win 7 compatible.
@KrisKasprzakАй бұрын
If you referring to finding the download link, it’s in the description, if you’re referring to the GitHub page look for the code button and it will let you download there
@AF-YouTubАй бұрын
DOWNLOAD LINK wont work
@KrisKasprzakАй бұрын
works for me.
@gaal8762Ай бұрын
Hello . Writes an error 'ILI9341_NAVY' was not declared in this scope 'ILI9341_DARKGREEN' was not declared in this scope 'ILI9341_DARKCYAN' was not declared in this scope 'ILI9341_MAROON' was not declared in this scope And a lot of this as well as 'elapsedMillis' does not name a type
@KrisKasprzakАй бұрын
It doesn’t sound like you’ve got the libraries installed.
@gaal8762Ай бұрын
@@KrisKasprzak Thank you, I understand, I found your other code for mega 2560. Another question: for mega 2560 you need to connect only these contacts ? #define T_CS 3 #define T_IRQ 2 #define TFT_DC 48 #define TFT_CS 53 #define TFT_RST 49 #define PIN_LED 26 Do I need to connect MISO to 50 end MOSI to 51 ? Where to connect #define LED_PIN 26 ?
@gaal8762Ай бұрын
@@KrisKasprzak Do you need matching resistors between the display and mega 2560?
@user-dm2ik2yj9xАй бұрын
Thanks so much Kris!!!! Great video enabled me to fix my garage door opener. You rock.
@KrisKasprzakАй бұрын
Glad to help
@jeffreycayanan9252Ай бұрын
hi,, where i can get code to use as midi?? teensy 4.1
@KrisKasprzakАй бұрын
I recommend joining the Teensy community forum and asking there.
@AdrenalineCrewАй бұрын
Did not explain how to move it to the proper proper torque
@KrisKasprzakАй бұрын
Did you not watch the video up until the 1:32 mark?
@gabrielalmeida50472 ай бұрын
Excelent video, thank you.
@KrisKasprzakАй бұрын
Glad you liked it!
@nightfall60402 ай бұрын
Hello Kris, first of all thank you very much for providing such tutorial!, can i ask you where you have learned it? are there any extended courses available?
@KrisKasprzak2 ай бұрын
A couple of basic vids and a bunch of hacking.
@informationforyou68552 ай бұрын
Can I get the circuit for this This was really helpful
@KrisKasprzakАй бұрын
Glad I could help.
@RafaelSales552 ай бұрын
HI sir, thank you a lot for the video, I could not found WebServer can I follow the tutorial using esp 8266(nodeMcu)?
Пікірлер
Why can't they provide the .exe?
very professional done every word crystal clear keep up the great work
When in the DOS cmd window and you are typing a path or file name, TAB is you best friend - it's basically auto complete based on the text you're typing.
i need to do it but actually my trees are dead so i was going to just saw it. I don't want to destroy the pot, though!!! i have good pots. don't want to destroy them. i need to destroy the already dead plant.
Thank you
Very good
Awesome!!!
Glad I could help
thanks
Ever think of making these display the information of bat chirps?
Thank you for making this video. The visual aids and explanations were extremely helpful in helping me better understand this problem. Your explanation and showing how to adjust the dampers was extremely informative. This video might be 9 yrs. old, butter the information you provided is very relevant today. Thank you very much.😊👍👍👍
glad I could help.
Good info, knew high Merv ratings choked air flow, didn't think of 4 inch filters. BTW, here are some of the numbers for Honeywell filters that fit 1 inch frames 4 inches thick. Pricy, but last 4 times as long so overall about the same cost. Honeywell FC40R1094 12x12x4 FC40R1037 12x24x4 FC40R1078 24x24x4 You can search for your size with Honeywell and FC which will turn it up. They make many sizes as well as some that are 3 inches thick. Filterbuy also make some 4 inch thick filters for one inch frame.
Thanks for the info!
Fret?....
amazing my friend, just one question, u library works on E220-900T22D too? thz 4 all!
Nice, just starting out with ESP32 👍
Have fun!
I found out because I have a Mac.
I think divshare link isn’t working anymore do you have another sources thank you.
Check out the link in the description I’ve recently tested it and it works
Thank so much Kris I finally got the driver and the program running. When it read my eeprom it had all ff. I try to program it but it won’t program. It just go back to where it had all gf. Any ideas thank you Kris.
Copied the code and tried it but the ball stays in display one. Hmm
On the back of each display, what is its address?
@@KrisKasprzak One is set to 0x3C and the other is 0x3D. The text shows up correctly for display 1 and 2 but the little ball stays in display 1, looping around.
disableCore1WDT(); gives error. Where do you put the code for this function?
that code may not work on all ESP32's just comment it out. It disables the watchdog timer.
@@KrisKasprzak Thank you.
14 years later and I'm using this tutorial😂
Glad it still helps
Amazing ! I have a £300 , 3 metre tall birch tree being delivered next week - this has stopped the fear !
Glad I could help, sounds like you have a really really nice tree you’re about to plant
What if hardly any air gets to the room on the 2nd floor from furnace located in basement?
This video was very helpful. It was refreshing to find content that is concise and clearly directed. Instructional videos of this caliber set a standard for educational content. Additionally, the absence of text-to-speech narration and background music enhanced the clarity and quality of the presentation. Thank you for your excellent work!
I appreciate your very positive comments
Im not sure what im not doing right, i have installed all the library but when i try to compile the program i always get same error 'Arial_16' was not declared in this scope
What MCU are you using?
@@KrisKasprzak A mega 2560 from elegoo. was trying to just have the code compiled to prove it has everything it need to work than try to modifiy the code to make it work with the h8357D
@@KrisKasprzak what i would like to do is have a graphic show the lst 24H of data and go to a new page every day, trying to make a air purifier with a particulate sensor, so your code seems like i could do that with it if i make a few modification.
Where did you lift the rear of the car that high. The Google suggests to read tow hitch that protrudes from by the gas tank
OMG my car is a 2005. I doubt it's ever been changed 😮😂. Doing this today!
Great video Kris, could you hint as to where you got this funnel and pipe kit from because my carbon came alone in a box.
I got all my stuff from pelican water back when they were in business. Maybe US water systems has parts?
@@KrisKasprzak Kris thank you, I'll try that to see what they have.
Sorry to bother you, I would like to ask if the code in the video can be used for 2.4 inch ILI9341 320*240. If it could work what modification details should I pay attention to ? Looking forward to your reply T_T
I have a library for Adafruit_ILI9341 displays. It has and example for and ESP32 but that same example can be used for other boards. Have a look github.com/KrisKasprzak/Adafruit_ILI9341_Controls/tree/main
how can i add background image in supermon.h arduino code
do you ever do anything with the other tank? How long does that one last?
According to the manufacturer, there is no maintenance required on the salt-free conditioner. You will need to replace the media in the curb and filter every five years.
Great video Inwas wondering what supermon does in this?
It is simply a .h file that lists the HTML and JavaScript code
🙏 P r o m o s m
please the Ebyte library can work with the E49-400T20D on esp32 exemple ??
this library should be able to program the E49, see the example ESP32 folder. However you will need to specify 0 for each of these (as they are unsupported): .SetPullupMode .SetWORTIming .SetFECMode
Great Video, Thank you.
Glad you liked it.
Everything looked great, until .... *.EXE * .... A PC! ARGHHHH !! any other way to build the bitmap on Mac or Linux? Even without that, good baseline... And, with 16M of flash, even 512K on F411, a few fonts could be doable. Thx!
I did not write the font convert too, i'm only showing how to use it.
Do you have a more simplified version of component grouping for interferences between moving parts? thanks
Code doesn't compile. again, another video on the subject with the same issues. why did you make a video and include code if it doesn't work? People are trying to follow along.
Compiles just fine for me… Maybe it’s… You…
So you could use this to generate the IL code, then convert to HTML using GPT4?
No idea.
Doesn't Arduino Uno and Nano has only one serial port? How do you initiate two distinct serial communications then?
use software serial for the EBYTE, you can still program with the USB port
Have you made a Night Lapse tutorial with reference to the post editing you can do?
Hi Kris! Great work. Thx. I’ve been using your library for a while. Wonder is I can use it for point to point communication instead of transparent?
This library is intended for programming these units only while there is a method to send and receive it simply calling serial.read and serial.write
No place to click to download. Win 7 compatible.
If you referring to finding the download link, it’s in the description, if you’re referring to the GitHub page look for the code button and it will let you download there
DOWNLOAD LINK wont work
works for me.
Hello . Writes an error 'ILI9341_NAVY' was not declared in this scope 'ILI9341_DARKGREEN' was not declared in this scope 'ILI9341_DARKCYAN' was not declared in this scope 'ILI9341_MAROON' was not declared in this scope And a lot of this as well as 'elapsedMillis' does not name a type
It doesn’t sound like you’ve got the libraries installed.
@@KrisKasprzak Thank you, I understand, I found your other code for mega 2560. Another question: for mega 2560 you need to connect only these contacts ? #define T_CS 3 #define T_IRQ 2 #define TFT_DC 48 #define TFT_CS 53 #define TFT_RST 49 #define PIN_LED 26 Do I need to connect MISO to 50 end MOSI to 51 ? Where to connect #define LED_PIN 26 ?
@@KrisKasprzak Do you need matching resistors between the display and mega 2560?
Thanks so much Kris!!!! Great video enabled me to fix my garage door opener. You rock.
Glad to help
hi,, where i can get code to use as midi?? teensy 4.1
I recommend joining the Teensy community forum and asking there.
Did not explain how to move it to the proper proper torque
Did you not watch the video up until the 1:32 mark?
Excelent video, thank you.
Glad you liked it!
Hello Kris, first of all thank you very much for providing such tutorial!, can i ask you where you have learned it? are there any extended courses available?
A couple of basic vids and a bunch of hacking.
Can I get the circuit for this This was really helpful
Glad I could help.
HI sir, thank you a lot for the video, I could not found WebServer can I follow the tutorial using esp 8266(nodeMcu)?