Floor mounted transmission cut out switch.....or diff lock pedal as anyone who knows about ford diggers calls it!😂 I suppose case don't know because they don't have one
@jackmancolby6396 Жыл бұрын
Total Tractor propaganda I love it 🔥 🔥 🔥
@mauricelevy9027 Жыл бұрын
Lovely little video of the days when We acknowledged that engineers were valuable people .
@charliemccahill2131 Жыл бұрын
2:09 New Holland TM 175 same as the 2004 brochure for TM tractors as it was the same trailer and tractor
@paulnolan1352 Жыл бұрын
I worked as a fitter at a Ford construction Machinery Dealers in the early 80’s and the 555 was a new model then, a big improvement on the 550. The 655 came out as I was leaving. The problem Ford had at that time was a lack of volume sales with a disappointing line up of plant, eg H42, H44, the 66 wheel loader and with the likes of the 13/6, 550 backhoe all slow and underpowered they were never going to set the world on fire.
@charliemccahill2131 Жыл бұрын
5:03 A976 RRV is still around as it comes up on SORN
@limyrob1383 Жыл бұрын
Just driven to the shops and back thanks to a 1966 Perkins. Still going strong.
@conmanumber1 Жыл бұрын
Sold to Massey Ferguson once the Western worlds largest agricultural machinery manufacturer then lateral to present day it's a division of Caterpillar.
@paulnolan1352 Жыл бұрын
Being a retired plant fitter I worked on and serviced a lot of these Engines in all types of Machines. To be honest the Engines were rubbish, underpowered, prone to overheating with constant blue, black, white smoke and always bollocking oil out!. I don’t miss them.
@danielheckmann4898 Жыл бұрын
Love it😊
@mandataruu8685 Жыл бұрын
both were sound like tractors.....
@charliemccahill2131 Жыл бұрын
They do have tractor engines in them Such as the 555 which has the ford 4610 engine and the 580g has the same engine as a David brown 1294
@peteroreilly9321 Жыл бұрын
Very good video about Ford vs Case ,both good machines,i,m a good fan of Ford and of Case too!both very good brands 🚜🚜🥇🥇🏆🏆each good in theire own way
@jcbdriver Жыл бұрын
yes good machines, learnt on a 580G when I was 10 yr old one with the turbo engine but then went onto the JCB 3cx and drove many in my plant operating days.
@silviobezerra64602 жыл бұрын
Olá eu adoro muito maquinário máquinas pesadas são minha paixão
@FirstnameLastname-qe3ry2 жыл бұрын
0:37 Fiatagri been real quiet since john deere dropped this line
@Ferdp Жыл бұрын
👍
@-w-scott71142 жыл бұрын
The music is awesome!!!🤣
@JorgeGarcia-nu4or2 жыл бұрын
Amigos para mim a melhor retroescavadora da história da Case...
@michaelmyers63352 жыл бұрын
What size battery do you recommend for a Ford 555d backhoe
@kevinmic6740 Жыл бұрын
A 622 battery was the original battery used.
@ikraamalhasantarar5892 жыл бұрын
V niccc bro❤
@davidwolff89032 жыл бұрын
Best engines in the world.
@CarlHargreavesRustyRelicsUK2 жыл бұрын
does anyone know the make of the orange peel grab on the backhoe towards the end of the video??
@JorgeGarcia-nu4or2 жыл бұрын
Amigos para mim a melhor retroescavadora feita pela a case ...
@penitadesara20952 жыл бұрын
Aq no brasil sou mecanico trabalho com toda linha perk ate agora anova geraçao aq tenho um aberto 4 cilindro 1114 14 E montado na caterpila retro cescavadeira muito bom facio a montagem identico os antigos q equipava a caminhonet GM D20
@agrohubertovsky35442 жыл бұрын
these tractors is the best tractors ever
@CharlieMccambridge2 жыл бұрын
I was driving one today
@ikramalai60482 жыл бұрын
Makan sihat tak naik
@Theattyman2 жыл бұрын
How lovely to see my late dad on this video , thank you so much , so nice to to see
@uzairjahanian83122 жыл бұрын
I am from Pakistan I buy new harwester fx 28 first time it can not show Kph speed is 0.00 show on moniter please fix my problem
@harmaltena37552 жыл бұрын
U probarly have a switch in the cab wich turns off the speed counter, so u can go faster on the road
@uzairjahanian83122 жыл бұрын
My harwester faster on the road but counter can not work
@maxmustermann83172 жыл бұрын
Kirovets k700A♥️
@sasalukic92622 жыл бұрын
FORD 👍
@whitecliffs2 жыл бұрын
my late father worked at perkins during the 70's. as a schoolboy i would see the hoards of workers leaving the gates after their shifts had ended. happy times and how i wish we as a country still had as strong a manufacturing base as we once did.
@fordnut49142 жыл бұрын
Sounds like a jealous Britt talking smack on the competition
@edwardkennedy99192 жыл бұрын
Worked on them in jcb excavators, they were ok i guess but then hitachi came along with isuzu engines , far superior engines.
@MitzvosGolem13 ай бұрын
Isuzu and all Japanese Diesels are the best. Mitsubishi and Yanmar ,Kubota in many brand machines. Just don't use ether starting fluid or boom 💥
@saltwaterinmyveins3 жыл бұрын
I saved up my money and bought a 416B Cat (serious junk, old Ford and Case way better). Sold the Cat bought a 410E Deere. Deere was amazing. My old dad and his freinds couldn't believe the work I did!
@alanarriola943 жыл бұрын
Hola.. que posibilidad hay de traducir al.español?
@usmanjutt423 жыл бұрын
Fx 38
@usmanjutt423 жыл бұрын
My mcheen faled pleas halp
@usmanjutt423 жыл бұрын
Falled
@davidellis2793 жыл бұрын
All this sounds great,the 6-354 was not a bad engine and the company I worked for run about 20 Seddon 16/4 flats but I don’t think any of them manage more than 150,000 miles before we had problems with them. Oil consumption was horrendous on the engines that were fitted with Chrome liners so we removed them and fitted cast iron ones. The previous vehicles we had were Ford BMC and Bedford and all of them did over 250,000 miles before any major problems. Without a doubt the best engines of the day was the Leyland 350/375 and 400 series of engines by a country mile. The V8 510 and 540 Perkins were nothing to write home about with their constant head gasket problems,in 16 toners they weren’t bad but in 24 ton six wheelers and tractor units they were UTTER CRAP. In tractors and fork trucks Perkins were great but for haulage applications they weren’t great.
@asankaprasath37213 жыл бұрын
8ltrs per 1h...🤣🤣...jcb better
@hedydd23 жыл бұрын
Most unfortunate that under Cat they have lost the majority of their previous customer base from Maintou to MF, to be replaced by FPT, Deutz and AGCO-Power/Sisu and JCB engines. Where did they go wrong? They cheapened out with not installing dry liners for a start. Then they went heavy on EGR for their common rail engines where everyone else bar DPS went for simpler engines with compact cooling packs which fitted existing machinery, that used less fuel by using SCR/Adblue. Apart from Cat, I'm sure they must have lost half their volume sales to rivals over the last twelve years to 2021.
@MitzvosGolem13 ай бұрын
Sad . I have many up until 4000 series . They were the best . Now Kubota, Yanmar,CNH and others took over.
@likeaboss8603 жыл бұрын
Don't play like Case can get in the same sandbox as a john deere
@RoederFamilyFarms3 жыл бұрын
Wish the John Deere cabs on this era of tractor in the USA were like this. Looks much better then a sound guard
@tonychearnley32363 жыл бұрын
Very rough driving at 5.16 wouldn't last long with that abuse!
@sbailucky41983 жыл бұрын
not the CASE engine, that the David Brown engine , put in the Case 580F and 580G
@linogoncalves22213 жыл бұрын
I own a 1750 , stopped for 20 years and it started at first turn what a great machine !!!
@krzycho26263 жыл бұрын
02:03 my engine perkins 6.305
@johndorazio24003 жыл бұрын
Old but good
@MimicoBungalow3 жыл бұрын
I love how the black guy that traveled to the Perkins plant with the white and Asian man - on the way back on the train - holds the door for the other two, to get aboard the train...almost 40 years ago now...not many 'ladies' working in that plant...and pretty much everybody is, well...'white'...Those 'sophisticated computers' are quite quaint now!! They remind me of the old 'IBM' 8088's with green monochrome monitors we used to use back in the day...and the TAPE DRIVE storage system! Wow...Just think: likely a modern 'thumbdrive' could hold the information in that lot! Thanks for whoever transferred this from VHS...excellent video!
@hayseed-br9iu3 жыл бұрын
I have a 6650 and a 6850 and i would never get rid of them
Пікірлер
My Cousin has a John Deere 6600
I have a few Perkins engines . Excellent 👍
Floor mounted transmission cut out switch.....or diff lock pedal as anyone who knows about ford diggers calls it!😂 I suppose case don't know because they don't have one
Total Tractor propaganda I love it 🔥 🔥 🔥
Lovely little video of the days when We acknowledged that engineers were valuable people .
2:09 New Holland TM 175 same as the 2004 brochure for TM tractors as it was the same trailer and tractor
I worked as a fitter at a Ford construction Machinery Dealers in the early 80’s and the 555 was a new model then, a big improvement on the 550. The 655 came out as I was leaving. The problem Ford had at that time was a lack of volume sales with a disappointing line up of plant, eg H42, H44, the 66 wheel loader and with the likes of the 13/6, 550 backhoe all slow and underpowered they were never going to set the world on fire.
5:03 A976 RRV is still around as it comes up on SORN
Just driven to the shops and back thanks to a 1966 Perkins. Still going strong.
Sold to Massey Ferguson once the Western worlds largest agricultural machinery manufacturer then lateral to present day it's a division of Caterpillar.
Being a retired plant fitter I worked on and serviced a lot of these Engines in all types of Machines. To be honest the Engines were rubbish, underpowered, prone to overheating with constant blue, black, white smoke and always bollocking oil out!. I don’t miss them.
Love it😊
both were sound like tractors.....
They do have tractor engines in them Such as the 555 which has the ford 4610 engine and the 580g has the same engine as a David brown 1294
Very good video about Ford vs Case ,both good machines,i,m a good fan of Ford and of Case too!both very good brands 🚜🚜🥇🥇🏆🏆each good in theire own way
yes good machines, learnt on a 580G when I was 10 yr old one with the turbo engine but then went onto the JCB 3cx and drove many in my plant operating days.
Olá eu adoro muito maquinário máquinas pesadas são minha paixão
0:37 Fiatagri been real quiet since john deere dropped this line
👍
The music is awesome!!!🤣
Amigos para mim a melhor retroescavadora da história da Case...
What size battery do you recommend for a Ford 555d backhoe
A 622 battery was the original battery used.
V niccc bro❤
Best engines in the world.
does anyone know the make of the orange peel grab on the backhoe towards the end of the video??
Amigos para mim a melhor retroescavadora feita pela a case ...
Aq no brasil sou mecanico trabalho com toda linha perk ate agora anova geraçao aq tenho um aberto 4 cilindro 1114 14 E montado na caterpila retro cescavadeira muito bom facio a montagem identico os antigos q equipava a caminhonet GM D20
these tractors is the best tractors ever
I was driving one today
Makan sihat tak naik
How lovely to see my late dad on this video , thank you so much , so nice to to see
I am from Pakistan I buy new harwester fx 28 first time it can not show Kph speed is 0.00 show on moniter please fix my problem
U probarly have a switch in the cab wich turns off the speed counter, so u can go faster on the road
My harwester faster on the road but counter can not work
Kirovets k700A♥️
FORD 👍
my late father worked at perkins during the 70's. as a schoolboy i would see the hoards of workers leaving the gates after their shifts had ended. happy times and how i wish we as a country still had as strong a manufacturing base as we once did.
Sounds like a jealous Britt talking smack on the competition
Worked on them in jcb excavators, they were ok i guess but then hitachi came along with isuzu engines , far superior engines.
Isuzu and all Japanese Diesels are the best. Mitsubishi and Yanmar ,Kubota in many brand machines. Just don't use ether starting fluid or boom 💥
I saved up my money and bought a 416B Cat (serious junk, old Ford and Case way better). Sold the Cat bought a 410E Deere. Deere was amazing. My old dad and his freinds couldn't believe the work I did!
Hola.. que posibilidad hay de traducir al.español?
Fx 38
My mcheen faled pleas halp
Falled
All this sounds great,the 6-354 was not a bad engine and the company I worked for run about 20 Seddon 16/4 flats but I don’t think any of them manage more than 150,000 miles before we had problems with them. Oil consumption was horrendous on the engines that were fitted with Chrome liners so we removed them and fitted cast iron ones. The previous vehicles we had were Ford BMC and Bedford and all of them did over 250,000 miles before any major problems. Without a doubt the best engines of the day was the Leyland 350/375 and 400 series of engines by a country mile. The V8 510 and 540 Perkins were nothing to write home about with their constant head gasket problems,in 16 toners they weren’t bad but in 24 ton six wheelers and tractor units they were UTTER CRAP. In tractors and fork trucks Perkins were great but for haulage applications they weren’t great.
8ltrs per 1h...🤣🤣...jcb better
Most unfortunate that under Cat they have lost the majority of their previous customer base from Maintou to MF, to be replaced by FPT, Deutz and AGCO-Power/Sisu and JCB engines. Where did they go wrong? They cheapened out with not installing dry liners for a start. Then they went heavy on EGR for their common rail engines where everyone else bar DPS went for simpler engines with compact cooling packs which fitted existing machinery, that used less fuel by using SCR/Adblue. Apart from Cat, I'm sure they must have lost half their volume sales to rivals over the last twelve years to 2021.
Sad . I have many up until 4000 series . They were the best . Now Kubota, Yanmar,CNH and others took over.
Don't play like Case can get in the same sandbox as a john deere
Wish the John Deere cabs on this era of tractor in the USA were like this. Looks much better then a sound guard
Very rough driving at 5.16 wouldn't last long with that abuse!
not the CASE engine, that the David Brown engine , put in the Case 580F and 580G
I own a 1750 , stopped for 20 years and it started at first turn what a great machine !!!
02:03 my engine perkins 6.305
Old but good
I love how the black guy that traveled to the Perkins plant with the white and Asian man - on the way back on the train - holds the door for the other two, to get aboard the train...almost 40 years ago now...not many 'ladies' working in that plant...and pretty much everybody is, well...'white'...Those 'sophisticated computers' are quite quaint now!! They remind me of the old 'IBM' 8088's with green monochrome monitors we used to use back in the day...and the TAPE DRIVE storage system! Wow...Just think: likely a modern 'thumbdrive' could hold the information in that lot! Thanks for whoever transferred this from VHS...excellent video!
I have a 6650 and a 6850 and i would never get rid of them
I have 6710