Пікірлер

• 
  @pedrosanpedro5281Күн бұрын

  In reality, there is a raised lip on the drum, therefore adjustment is necessary once the drum is installed through the back of the drum, via rubber grommet.😂

• 
  @jasonl31855 күн бұрын

  Pcv location please

• 
  @jasonl31856 күн бұрын

  Have you done a pvc valve change video on this yet? Please

• 
  @Rajsavaliya14108 күн бұрын

  Thank you

• 
  @diminisher5079 күн бұрын

  Bro, do you have any email . I own a mazda 2 2008 DE, inside intake manifold there are 4 blades, one of them (cylinder 4) is missing, can I get off the other 3 blades without getting secondary effect ?

• 
  @BoerVanPretoria13 күн бұрын

  Common issue is deterioration of the engine mounts that cause that noise, especially the top RH engine mounting.

• 
  @HiroshimaSpirit13 күн бұрын

  @@BoerVanPretoria This is about the engine itself running rough. Not feeling engine vibration in the cabin. People conflate the two all the time. You can have perfectly good engine mounts and the car still run poorly.

• 
  @jameswan67015 күн бұрын

  bro, is it still working fine?

• 
  @HiroshimaSpirit15 күн бұрын

  I don’t own the car anymore. Worked great while I had it.

• 
  @muntusmaximus16 күн бұрын

  Arent the rear reflectors required by Law? I had a KTM Enduro and it was required to add (the smallest reflector) to be legal (UK)

• 
  @HiroshimaSpirit16 күн бұрын

  Not where I live. We don’t have vehicle inspections and little things like that don’t really matter to the authorities here.

• 
  @niekgozer2617 күн бұрын

  Idk if it’s because i have projector lights but i cannot for the life of me get my hands in between the light and the chassis. Quite annoying to say the least.

• 
  @shadowgod926828 күн бұрын

  what size did you get, it doesn’t say size H4

• 
  @HiroshimaSpirit28 күн бұрын

  I’m sure I show the box and/or say it in the video. This was a long time ago.

• 
  @the_batmobile0.4Ай бұрын

  Is the dog bone mount causes vibration?

• 
  @HiroshimaSpiritАй бұрын

  A little bit, depending on what stiffness you get.

• 
  @WickedPugsАй бұрын

  Still super helpful in 2024, had to open up my key to check which type I needed for a replacement. No BS, just easy instructions and straight to the point. Thank you!

• 
  @zwopanda3Ай бұрын

  i want to thank you a lot ! i was looking for another car because i want to sleep in my car during my roadtrips ... but now i can keep my little babe (Mazda 2 1.3 84 HP 2012). i just hope that my 6'2" will fit in to sleep ... This car is so fucking underrated! hopefully for us

• 
  @the_batmobile0.4Ай бұрын

  Hey, whats the solution for the steering wheel clunking?

• 
  @the_batmobile0.4Ай бұрын

  Hey sir, i notice there's a knock feeling in my steering wheel, i checked the suspension and its ok , any ideas what it could be?

• 
  @the_batmobile0.4Ай бұрын

  Thank you sir. I was thinking wtf is this now, it works

• 
  @jaytravel-12Ай бұрын

  is this safe to do

• 
  @HiroshimaSpiritАй бұрын

  I don’t own it anymore but the car is still in the road. Nothing bad happened.

• 
  @jaytravel-12Ай бұрын

  @@HiroshimaSpirit o ok was thinking about doing it

• 
  @phoenixmaster916Ай бұрын

  Is it legal to black out the reflectors on my Mazda 2 Sport Hatchback in Florida?

• 
  @HiroshimaSpiritАй бұрын

  I live in Florida and was never bothered by it.

• 
  @marcinwiluszАй бұрын

  No knowledge cost me a price of new main switch on my 2014mazda 3. I disconnect it every thing when changing window regulator assembly. When put everything back together the auto switch stopped working. Than I went deeper into the main switch assembly and broke something under it. God thanks for KZread and people like you that take an effort to post it for others. Cheer's 🍺

• 
  @diminisher507Ай бұрын

  Bro, I installed rear lowering spring Megan racing... but I installed them upside down if I compare how you have nstalled yours..... does it affect the height of suspension or it is the same ?

• 
  @HiroshimaSpiritАй бұрын

  Probably doesn’t matter

• 
  @AccessCode101Ай бұрын

  Can you do a video of a car having the weird noise in the belt?

• 
  @user-zd6jd6rw2gАй бұрын

  Γάμο τον Χριστό σας στο you tube με της διαφήμισης το μουνι που σας πέταγε

• 
  @megabaneen80572 ай бұрын

  Thanks for this video. In my Mazda 3 they used to same clip method holding in the light bulb which is as you say ridiculous so hard to put in a new bulb in a tight space.. I might be purchasing a Mazda 2 So your videos are coming in handy Thanks

• 
  @megabaneen80572 ай бұрын

  Where did you get those headlamps?

• 
  @HiroshimaSpirit2 ай бұрын

  Look at my other videos.

• 
  @bobwebb74102 ай бұрын

  Got my son's Mazda 2 rear shoes to do this weekend, and was wondering if they were screw back calipers with the 'Ford connection' but happy to see they are drum. I use a manual (Hammer powered) impact driver for those screws but do make sure its the correct size bit, snug fit! if you don't have an impact driver, sometimes a 'clump' on the end of a big posi screwdriver can just loosen the rust. Otherwise, as Josh says, drill a divet and whack it, preferably with a punch. I always refit the screws, just tight enough (with a dab of copper grease, as it's high temp), that way the drum is held so I can accurately adjust the shoes. Some drums have a hole in them and a corresponding one in the hub, so you can adjust the brakes with a flat blade screwdriver, for which you need the drum secure. I also use high temp grease, if i lubricate the brake shoe to backplate area, just any old grease won't do as it might run off.. Brake grease is ptfe based

• 
  @matthewg45532 ай бұрын

  Thank you so much !

• 
  @jarie96892 ай бұрын

  thought i was gonna have to get an entirely new key! thank you for this video!!!

• 
  @jarie96892 ай бұрын

  for some reason, the two pieces aren’t separating son matter how hard i press down with my flat head screwdriver :(

• 
  @ironlionzion22652 ай бұрын

  I miss this car. I accidently put diesel in it and broke it

• 
  @Ricklopez19792 ай бұрын

  What are your alignment specs?

• 
  @musikman432042 ай бұрын

  8:39 😂

• 
  @nn-hx8oe2 ай бұрын

  what do u mean with the roof?

• 
  @illyrichards2 ай бұрын

  Thanks!! Just done this on my cx30 and worked a treat!!

• 
  @rafhendrickx99002 ай бұрын

  Do you have a link for the parts?

• 
  @markparish90722 ай бұрын

  just quietly getting on with business. my defender is now my leisure / tow vehicle. p.s my kia soul a 2012. had considered many alternatives in previous years should a family change occur and didnt want to lose the landy. the soul earns its keep in its savings and accessability.

• 
  @MadSniper5533 ай бұрын

  getting a clicking noise coming from my driver side door switch. anyone know what this is ? (the switch works but sounds like the window switch keeps clicking )

• 
  @ivanov5683 ай бұрын

  Wait till you have to change the catalytic converter, total nightmare…

• 
  @MrEolla3 ай бұрын

  Very clear

• 
  @5speeds4Life3 ай бұрын

  does anyone know where i can buy this bag full of these tools online? the prev owner didnt have one

• 
  @5speeds4Life3 ай бұрын

  lol previous owner didnt even provide this tool bag

• 
  @captain_bucko3 ай бұрын

  How about for the Mazda 2 third generation? Same recommendation ?

• 
  @HiroshimaSpirit3 ай бұрын

  Sure. Similar car, similar strategy.

• 
  @chad62433 ай бұрын

  Ive got a question about the mazda 2, is it possible to swap the 1.3 petrol to a 1.5 from the sport? Same block so id imagine it would drop in. Anything different about the sport and the standard such as exhaust etc? Appreciate any information.

• 
  @HiroshimaSpirit3 ай бұрын

  Theoretically yes, but I live in a country that only got 1.5 engines, so a swap isn’t really documented anywhere.

• 
  @chad62433 ай бұрын

  @@HiroshimaSpirit Hey thanks for the speedy info, that's great to hear, I'll probably talk to my mechanic about it and let him have a quick look before I buy an engine. Thanks a lot.

• 
  @mvuselelomaseko66953 ай бұрын

  All i wanted to know,thank you for your help with this video ❤

• 
  @mvuselelomaseko66953 ай бұрын

  #Super clean

• 
  @tebatsomotubatse20233 ай бұрын

  10mn

• 
  @lindakrelle66073 ай бұрын

  Great I've been looking for the place to put the tow hook just incase I get bogged down on my lane tomorrow so I might fit it before attempting to get out😂

• 
  @hamstercanibal3 ай бұрын

  Thank you for the video. How do you change the lightbulb underneath the amber part? I also got a 2008 Mazda2 with 180.000 km on the odometer, and that light just went out, and I can not pull out the hard to reach plug. Thank you!

• 
  @Craftimonium3 ай бұрын

  Hi! I recently replaced my filter and found a lot of leaves / stuff in (what I think is) the radiator behind the filters. Any idea what I can do to best clean it up? I figure getting in there with an old toothbrush and a vacuum would be enough.

• 
  @HiroshimaSpirit3 ай бұрын

  That’s perfectly fine

• 
  @juliosanviti93283 ай бұрын

  The car looks good bro as a fellow protege owner i admire your build progress

• 
  @andrearosa25283 ай бұрын

  Thank you for this. Really worked

• 
  @marcusmunoz27793 ай бұрын

  unprepared and uninformed

• 
  @HiroshimaSpirit3 ай бұрын

  Make a better video, cuck.