Пікірлер

• 
  @JorgeMagana-t6p7 күн бұрын

  Where is this place?

• 
  @UncleMike17767 күн бұрын

  @@JorgeMagana-t6p California City, California

• 
  @JorgeMagana-t6p6 күн бұрын

  @@UncleMike1776 like the exact address and everything because I can’t find that place

• 
  @UncleMike17766 күн бұрын

  @@JorgeMagana-t6p 35.19981° N, 117.83962° W

• 
  @00nutt9 күн бұрын

  Couldn't afford the balls!!!

• 
  @UncleMike17767 күн бұрын

  I haven’t seen those things in years!

• 
  @jordonchalmers30719 күн бұрын

  For the ghost trailer 😅

• 
  @UncleMike17767 күн бұрын

  Just got a show everybody he means business!

• 
  @TheZmoney4209 күн бұрын

  For light loads it would prob be fine if tested.. anything real prob not.

• 
  @UncleMike17767 күн бұрын

  Not worth the risk!

• 
  @PainterD5410 күн бұрын

  Now who wants to be on their knees or bent over to run a splitter? Not me. I'd have some legs on it so I could work at waist height, and have some kind of platform or table mounted on the back side of the wedge to catch the pieces after they're split so they don't just fall on the ground.

• 
  @UncleMike177610 күн бұрын

  @@PainterD54 I put it on my deck over trailer after then use, or a bench would work well!

• 
  @PainterD549 күн бұрын

  @@UncleMike1776 I will make a stand with wheels on one end to move it around and steel plates on each side of the beam and a large plate on the end of the splitter for the split pieces to slide on to so they don't end up on the ground.

• 
  @UncleMike17769 күн бұрын

  @@PainterD54 that would be a nice way to modify the tool!

• 
  @dinochat409422 күн бұрын

  Ground

• 
  @UncleMike177621 күн бұрын

  @@dinochat4094corrosion

• 
  @elarrayanchillan22 күн бұрын

  Hello, what year is your tractor?

• 
  @UncleMike177622 күн бұрын

  @@elarrayanchillan I think it was a 1979

• 
  @elarrayanchillan18 күн бұрын

  @@UncleMike1776 Gracias.

• 
  @user-kf5zs1ec3q25 күн бұрын

  I have one been the best mower i eever had but mine is acting up now i think its not getting gas

• 
  @UncleMike177625 күн бұрын

  @@user-kf5zs1ec3q check the pulse pump and the fuel filter, could have a gummed up carburetor on it too

• 
  @user-kf5zs1ec3q25 күн бұрын

  @@UncleMike1776 I changed the fuel pump.but not checked carb

• 
  @richardschaffling988228 күн бұрын

  Looks good

• 
  @UncleMike177627 күн бұрын

  @@richardschaffling9882 thanks for watching!

• 
  @richardschaffling988228 күн бұрын

  In Tn a bill of sale won’t work I asked at the DMV

• 
  @UncleMike177627 күн бұрын

  @@richardschaffling9882 I think I did a bonded title or something like that plus a lot of paper work to get the title in my name, but I got it handled it was pretty straightforward.

• 
  @shannonhansen6437Ай бұрын

  How did u get the break fluid out ??

• 
  @UncleMike1776Ай бұрын

  @@shannonhansen6437 vacuum bleeder, worked well

• 
  @terryjacobs1942Ай бұрын

  I just fixed my 3rd break light using this video. It still won’t light up. Any idea where the fuse would be located?

• 
  @UncleMike1776Ай бұрын

  @@terryjacobs1942 no, check out a wiring schematic I’m sure you could find it!

• 
  @baddriver3580Ай бұрын

  Wonder if they are putting Predator engines on the Turf Tigers? They are doing it to the Freedom Z's.....and such.... I just bought one and have to say....am liking it so far! Great video Uncle Mike.

• 
  @UncleMike1776Ай бұрын

  @@baddriver3580 thanks for watching! It’s a top notch mower

• 
  @yadirarodriguez-we9bmАй бұрын

  it does put in work

• 
  @UncleMike1776Ай бұрын

  @@yadirarodriguez-we9bm that’s right

• 
  @redgreen4449Ай бұрын

  Love YM series Yanmar . 👍

• 
  @UncleMike1776Ай бұрын

  @@redgreen4449 good tractors

• 
  @centralcal6604Ай бұрын

  I was more intrigued by those steaks 😋

• 
  @UncleMike1776Ай бұрын

  @@centralcal6604 thanks for watching!

• 
  @pauldenney3039Ай бұрын

  Model TXT VALOR ISG EFI Date Code M0221 SERIAL No. 3530362 no power at 2 fuses

• 
  @stevanrose7439Ай бұрын

  I mow a cemetery and the trees are always shedding limbs. I have a bucket 🪣 strapped down that I fill up with sticks and trash. And I’ve found that if I keep the blades sharp and don’t hit sticks my fuel lasts a lot longer and I can cut a lot in less time. Keep those blades sharp because it will cause a belt to break. And the short one is about fifty bucks.

• 
  @UncleMike1776Ай бұрын

  Absolutely sharp blades are a must when cutting grass!

• 
  @41moeatxАй бұрын

  Great video and great instructions, made my life a lot easier today. Thank you

• 
  @UncleMike1776Ай бұрын

  Thanks for watching!

• 
  @user-bb3ny2zp1m2 ай бұрын

  Oh buddy 😊

• 
  @user-bb3ny2zp1m2 ай бұрын

  Dam this guy is good 👍

• 
  @user-bb3ny2zp1m2 ай бұрын

  Not too many people like u around keep up the good work bud an go Cummins power 👍🍻

• 
  @user-bb3ny2zp1m2 ай бұрын

  Yes all diesel truck should have no mufflers

• 
  @UncleMike17762 ай бұрын

  I just put a muffler on my 4th gen dodge because the drone when pulling my 5th wheel toy hauler is heinous.

• 
  @user-bb3ny2zp1m2 ай бұрын

  Oh hell ya

• 
  @UncleMike17762 ай бұрын

  Thanks for watching

• 
  @user-bb3ny2zp1m2 ай бұрын

  Your welcome the trucks are much better they sound pretty good

• 
  @user-bb3ny2zp1m2 ай бұрын

  Nice work guys I have a 12v Cummins 92 with 4inch from turbo back with a 6 1/2 inch tip

• 
  @UncleMike17762 ай бұрын

  Bet that sounded nice!

• 
  @user-bb3ny2zp1m2 ай бұрын

  She has a nice dip loud sound to her

• 
  @user-bb3ny2zp1m2 ай бұрын

  I don’t mind the 6.7 Cummins been thinking about getting one but my 92 Cummins is much more cheaper too fix up lol 😆

• 
  @user-bb3ny2zp1m2 ай бұрын

  Don’t get me wrong they do sound good if u do it right

• 
  @user-bb3ny2zp1m2 ай бұрын

  The 6.7

• 
  @ashleymarie66822 ай бұрын

  GM doesnt look the same

• 
  @UncleMike17762 ай бұрын

  Just find one you like and try it out they are fairly inexpensive.

• 
  @billyjones96202 ай бұрын

  Could you add coconut and pecans to the mixture?

• 
  @UncleMike17762 ай бұрын

  I’ve never tried that so idk how it would turn out

• 
  @Johnrider12342 ай бұрын

  I got a 2024. 61 in 40 hp vanguard. Turf tiger 2

• 
  @tigergreg8Ай бұрын

  I just bought a 2020 61” 37 Vanguard with 1200 hours on it. I just need it for my personal lawn. Is is decent on gas? How do you like it?

• 
  @Johnrider1234Ай бұрын

  @@tigergreg8it’s a 2024 actually. It’s a beast. Good on fuel

• 
  @StarknightMT_official2 ай бұрын

  Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your 2018 Kawasaki Teryx4 800

• 
  @markclemens99642 ай бұрын

  Couldn't you have just separated it on the vehicle ( 3:07 ) and saved removing inner trim altogether?

• 
  @UncleMike17762 ай бұрын

  Not that I’ve seen

• 
  @markclemens99642 ай бұрын

  @@UncleMike1776 I did it leaving interior trim, washer line, and electrical on 2018 suburban today(May 18th 2024). Just had the small electrical plug to undo. Your tutorial helped, it just seemed easier to me since separating those pieces anyway to leave under part on vehicle. Thank you for the help!

• 
  @UncleMike17762 ай бұрын

  @@markclemens9964 that’s good to know!

• 
  @donniebee3 ай бұрын

  35 minutes wwwaaaaat?! Makes me want to do mine! Looks good 👍🏽

• 
  @UncleMike17762 ай бұрын

  It’s pretty easy looks good too

• 
  @kevincarr77392 ай бұрын

  @@UncleMike1776 I have a 09 Tahoe. I’m thinking of putting some 17s on 35s. What do you suggest?

• 
  @UncleMike17762 ай бұрын

  @@kevincarr7739 sounds like you’d need a leveling kit if not a small lift

• 
  @kevincarr77392 ай бұрын

  @@UncleMike1776 what would you suggest?

• 
  @UncleMike17762 ай бұрын

  @@kevincarr7739 rough country or bds would probably get you taken care of!

• 
  @nigman20233 ай бұрын

  Bro the bike is a sweet ride I'm glad it worked out the way it did the table is awesome too.

• 
  @UncleMike17763 ай бұрын

  Thanks for watching!

• 
  @dep61693 ай бұрын

  very nicely done.

• 
  @bleeding_rose19903 ай бұрын

  If u ask me, sounds like someone dropped there bike on that side took brake lever and pegs off and mufflers were damaged took most things off.one side

• 
  @UncleMike17763 ай бұрын

  Not quite sure. I don’t know the owner only knew the owners friend.

• 
  @DONKEYDUNNIT3 ай бұрын

  Chopped pipes bc catalytics lmao

• 
  @UncleMike17763 ай бұрын

  Noise maker

• 
  @davesdada113 ай бұрын

  Ummm...you literally showed nothing of use

• 
  @UncleMike17763 ай бұрын

  Thanks for watching! It’s literally so easy a caveman could do it!

• 
  @TheLetsgetgoing3 ай бұрын

  Where did you get those flaps on the back fender?

• 
  @UncleMike17763 ай бұрын

  I think it’s part of the club holder trim it was there when I bought it!

• 
  @TheLetsgetgoing3 ай бұрын

  @@UncleMike1776 I gotcha. I recently bought a medalist and need to add taillights but don’t have room on the rear fenders

• 
  @UncleMike17763 ай бұрын

  @@TheLetsgetgoing I’m sure there are some kits out there or you could fab something up your self

• 
  @happycamper1373 ай бұрын

  Corrosion!

• 
  @UncleMike17763 ай бұрын

  That will do it

• 
  @danegrant61683 ай бұрын

  What happened to the sportster?

• 
  @UncleMike17763 ай бұрын

  Sold it’s a few years back

• 
  @BradWallace-xp5gh4 ай бұрын

  Loved your video on the Pork tenderloin,…but you breaking it up with a glimpse into ,the planter box, your garden, and the Dogs, who I wouldn’t let within 10 feet of the Pork tenderloin,…they had THAT look in their eyes. You guys have a nice place.

• 
  @UncleMike17764 ай бұрын

  Thanks for watching

• 
  @nevrclose4 ай бұрын

  Have a link to that light?

• 
  @UncleMike17764 ай бұрын

  It was from Amazon and it was one of the lights that looks like a tube light, can’t find it on my history.

• 
  @chrislindsay37454 ай бұрын

  Man this was a great video but i wish you went into a little more detail on the actual water pump seal rebuild in general im having the same issue and i got the general idea but couldnt catch the lil details

• 
  @UncleMike17764 ай бұрын

  Thanks for watching. Hope you get yours under control!

• 
  @jayfromtexas67184 ай бұрын

  Great video! Learned a lot! Thanks.

• 
  @UncleMike17764 ай бұрын

  Thanks for watching!

• 
  @PainterD544 ай бұрын

  Should have run a board on end under the top of the table. It will start to sag after a while.

• 
  @UncleMike17764 ай бұрын

  Yeah should have braced it

• 
  @Renegar874 ай бұрын

  Great video!

• 
  @UncleMike17764 ай бұрын

  Thanks for watching

• 
  @vernonfarabee4 ай бұрын

  I wish you were in NC i would bring my scag to you

• 
  @UncleMike17764 ай бұрын

  They are pretty easy to service just take some time!

• 
  @user-fe6gc5rw2f4 ай бұрын

  Another one, you're killing me, I would die to have an 883 a 1200 They're my favorite bikes,, One day,, God bless you,😢

• 
  @UncleMike17764 ай бұрын

  I got it back on the road!

• 
  @tbar10474 ай бұрын

  I don't think that little stick can cause that much damage. 🤏💥

• 
  @UncleMike17764 ай бұрын

  It chowdered it up that’s for sure!

• 
  @adboke5 ай бұрын

  $816.00 is what the GMC dealership just quoted me. I'll be doing this myself thanks to your video

• 
  @UncleMike17765 ай бұрын

  It’s fairly easy I wouldn’t pay those dealership prices!

• 
  @OMGWUNSIU2 ай бұрын

  These days car dealers simply blow!!!

• 
  @russelltaylor48505 ай бұрын

  There is no way you just reached your there and PULLED the spoiler off! There are clips under the four screw post that are the pain to break loose. !!

• 
  @UncleMike17765 ай бұрын

  Just removed the hardware and it came off pretty easy.