This feels like it should have the theme music from MacGyver playing over it! Very impressive!
@VintageYop4 ай бұрын
Haha love it!
@refressopizza4147 ай бұрын
Hi sir good afternoon and your products price sending me thanks
@monoporfiado Жыл бұрын
It uses two sizes of bearings, doesn't it? Do you know which ones worked for you?
@gsicecreamuniverse Жыл бұрын
No, it's the same, my 3D Print was not sooo accurate, so for one I had to adjust it a little bit. If you print it good, no problem. I actually don't know the size, sorry.
@MrJorben Жыл бұрын
Just made one of these today, i ordered my 3d attachment via shapeways and am still waiting on that. I was curious if you remebered the size of the hole you screwed in the bottom metal bowl.
@gsicecreamuniverse Жыл бұрын
No sorry, i don't remember, i made the hole fitting the rest of the parts i had.
@gsicecreamuniverse Жыл бұрын
Really nice! 😋 I hope you will enjoy it!
@sanaaerr750 Жыл бұрын
I want to make one but can you help me plz iam from morocco
@esteejmckee3880 Жыл бұрын
Hello I would like info on how to make kitchen aid coater pan
@gsicecreamuniverse Жыл бұрын
What kind of infos do you need?
@gsicecreamuniverse Жыл бұрын
❤ YOUR FEEDBACK MATTERS! ❤ 🍦How do you like it, would you taste it? What do I turn into ice cream next? ✏ Write it in comment! 👇 And don't forget to subscribe here or I turn you into ice cream too! kzread.info/dron/LXjpKk7dEDPt3uiVGat2GQ.html
@VintageYop Жыл бұрын
Nice!
@gsicecreamuniverse Жыл бұрын
Thanks!
@LauraBenemann-po1wh Жыл бұрын
Lecker 😋
@gsicecreamuniverse Жыл бұрын
😋
@gsicecreamuniverse Жыл бұрын
❤ YOUR FEEDBACK MATTERS! ❤ 🍦How do you like it, would you taste it? What do I turn into ice cream next? ✏️ Write it in comment! 👇 Subscribe here or I turn you into ice cream too! kzread.info/dron/LXjpKk7dEDPt3uiVGat2GQ.html
@VintageYop Жыл бұрын
Oreo ice cream! 😋
@laurabenemann1637 Жыл бұрын
Als nächstes Bananeneis 😍
@gonulcanseverkapar9677 Жыл бұрын
What about the polishing? Any idea on that? 😢
@gsicecreamuniverse Жыл бұрын
Maybe shellac, or leaving so, like a Chocolat Bar
@celiapearls7910 Жыл бұрын
I was seriously thinking ikea hack and here it is. I am lucky I can canabalize another attachment that broke (slicer)
@HobbygirlDolls Жыл бұрын
Would this work to convert a manual pasta cutter attatchment?
@gsicecreamuniverse Жыл бұрын
I don't know how strong is a pasta base. Test it and look were you can update it after maybe?
@erryltudor56742 жыл бұрын
I am trying this now. Just bought the bowls from Ikea, and I'm getting a professional shop to cut and weld them. I also bought a cheap second hand meat grinder attachment for my Kenwood Chef - I'll use the attachment to adapt and throw the rest away. I'll post when it's done! The only thing that concerns me is the angle of the head.
@Justask2 жыл бұрын
How did it go??
@gsicecreamuniverse Жыл бұрын
I want to see it also! 😝
@sanaaerr750 Жыл бұрын
Can you give me the web site from ikea and the way to make attachment 😊
@SPS62511 ай бұрын
have you made it ?
@abdulhakkiem15512 жыл бұрын
Sir your contact no
@ceejay3312 жыл бұрын
Very unclear, no dimensions
@gsicecreamuniverse Жыл бұрын
The Goal was to give the Idea and the possibility of it.
@Oberonjames2 жыл бұрын
Dude, you need to improve your print quality! lol
@gsicecreamuniverse Жыл бұрын
😝
@mottoBediS34122 жыл бұрын
How do you securely attach the two bowl halves together?
@gsicecreamuniverse Жыл бұрын
The best is to arc weld it, i can't do it, so i fix it together with Food safe Silicon
@triceybear072 жыл бұрын
Hi, this was fantastic can you please share the materials so I can make one for my Kitchenaid?
@gsicecreamuniverse Жыл бұрын
Which one? For the little parts, i go to the hardware store with my construction and look what fit the best. 😂
@marypaoletti693 жыл бұрын
⭐️⭐️⭐️⭐️⭐️ thank you
@rinkeshsonani69053 жыл бұрын
Which machine and model you use behind the Bowl???? Can you please tell me I wann a make it
@gsicecreamuniverse Жыл бұрын
You mean the kitchenaid Artisan ?
@FlavorLab3 жыл бұрын
This is absolutely incredible
@chefpatrice17263 жыл бұрын
😂😂😂😂😂😂😂😂😂😂😂😂😂
@gsicecreamuniverse Жыл бұрын
😜
@moimeme77243 жыл бұрын
I'll really to have one, do you sell it? Hi guys, any links to buy one?
@gsicecreamuniverse Жыл бұрын
No sorry, but you can find something on google with :"kitchenaid panning"
@kerstenvalentine95083 жыл бұрын
Hmm I guess you have to actually have a 3d printer already to have this be legitimately about 30€.. bummer.
@gsicecreamuniverse Жыл бұрын
Yes, or maybe a friend that have one? You can also look on Google : "kitchenaid panning"
@jilliankuchman36793 жыл бұрын
Did you have to scale the 'adapter 8' before printing it?
@gsicecreamuniverse Жыл бұрын
No, it fit well.
@TheRoche193 жыл бұрын
The magic of KZread Platform to express the Geniusly
@jetx27103 жыл бұрын
I would like to make one
@gsicecreamuniverse Жыл бұрын
Do it! Maybe you have some friends that can help you.
@jetx271011 ай бұрын
@@gsicecreamuniverseI made it !!!!I use it for work it great thank you 😊
@ondrejgrulich29584 жыл бұрын
Hey Guillaume, could you share more details on how to make this? Did you draw the 3D printed parts yourself? Thanks O.
@gsicecreamuniverse3 жыл бұрын
Hi, here are the link for them www.thingiverse.com/thing:39958 www.thingiverse.com/thing:431064
@jaysonarreola99616 ай бұрын
@@gsicecreamuniverseque tiene de diferente cada link...?
@Mnemonicer4 жыл бұрын
Can anyone link me the 3D Files. Not finding anything on Yeggi or Thingiverse. Thank you~
@theofficialbes4 жыл бұрын
Did you glue the 3D printed parts together with the bolts and nuts? I'd like to make one of these.
@gsicecreamuniverse3 жыл бұрын
Hi, no it fit good without but maybe you can do it, be careful if you glue the bearing.
@LinsVosse4 жыл бұрын
My kitchenaid only has 1 stand. How do you manage to tilt the bowl in the right angle? Using the stand creates an angle that’s too big.. thanks!!
@susanna12074 жыл бұрын
Check out the videos of confi kit, they made a 30 degree stainless steel wedge to put the KA on
@gsicecreamuniverse3 жыл бұрын
I just wedged a piece of cardboard in the slot under the bowl.
@SennyTancheff4 жыл бұрын
You sir are a LEGEND!!!
@S3Moto4 жыл бұрын
Do you recall what are the dimensions of the bearings you used?
@theofficialbes4 жыл бұрын
Yes I want to know this
@gsicecreamuniverse3 жыл бұрын
I just print the part and go to the store with the parts to become the perfect fit for it, maybe you print yours and you become an another dimension for it.
@LinsVosse4 жыл бұрын
At 0:55; how do you decide where you would cut the bowl? Or is this of no importance?
@gsicecreamuniverse3 жыл бұрын
You can see a Coating pans and imagine if the hole is to small you can look nicely in it and work inside it, if it is to big the elements you put in will come out when it starts to turn
@randischreiber59084 жыл бұрын
I'd love to learn how to make it!
@theofficialbes4 жыл бұрын
Me too
@gsicecreamuniverse3 жыл бұрын
See the video and ask me something ;-)
@adityajadhav50472 жыл бұрын
@@gsicecreamuniverse how can I make this on a delta mixer 5litre
@joelhampton37775 жыл бұрын
Brilliant! Wish I had the tools to make one. They want $400-$600 dollars for these, which is crazy. What's even crazier is I'm about to buy one... (smh)
@labella92914 жыл бұрын
No, what is crazy is that is the perfect equipment I need for something that isn't even candy related and I'm looking at buying one, because goodness knows I don't have the ability to make one.
@gsicecreamuniverse3 жыл бұрын
You can make it just with a bowl and another person which pours the chocolate in every 3-4 min while you stir constantly
@TheSimplyhala5 жыл бұрын
Hello, that is brilliant, can i get the printing files? and which screws should be used?
@gsicecreamuniverse5 жыл бұрын
The Files Names ist on the Video and on Thingiverse ;-) I used the Screw I had, I don't know yet, but you can just go to the Shop with your Parts and choose there.
@rpmaguireone6 жыл бұрын
Where did you get the steel bowl shape?
@gsicecreamuniverse5 жыл бұрын
Ikea
@sanaaerr750 Жыл бұрын
@@gsicecreamuniversethe lien site for ikea
@kraemkrae74636 жыл бұрын
Do you make these for sale
@gsicecreamuniverse5 жыл бұрын
No, sorry ;-/
@christopherhytryderrington4 жыл бұрын
Hi Kay, do you still need one made? We can do that for you! We are making several for ourselves.
@aarenpolderman58094 жыл бұрын
Are you ordering the parts used here or designing your own?
@christopherhytryderrington4 жыл бұрын
@@aarenpolderman5809 designing our own. Also making low cost tempering machines. please email me at [email protected]. thanks
@LinsVosse4 жыл бұрын
@@christopherhytryderrington Hi Christopher, I'm also trying to make one but I cannot seem to find the right screws and bearings. Would you mind sharing the dimensions you use? thanks in advance!
@nathanhoward51896 жыл бұрын
I don't have a 3d printer or dremel...
@gsicecreamuniverse3 жыл бұрын
I made mine by myself with some guys in a workplace, for +350 euros
Пікірлер
Love the idea❤
This feels like it should have the theme music from MacGyver playing over it! Very impressive!
Haha love it!
Hi sir good afternoon and your products price sending me thanks
It uses two sizes of bearings, doesn't it? Do you know which ones worked for you?
No, it's the same, my 3D Print was not sooo accurate, so for one I had to adjust it a little bit. If you print it good, no problem. I actually don't know the size, sorry.
Just made one of these today, i ordered my 3d attachment via shapeways and am still waiting on that. I was curious if you remebered the size of the hole you screwed in the bottom metal bowl.
No sorry, i don't remember, i made the hole fitting the rest of the parts i had.
Really nice! 😋 I hope you will enjoy it!
I want to make one but can you help me plz iam from morocco
Hello I would like info on how to make kitchen aid coater pan
What kind of infos do you need?
❤ YOUR FEEDBACK MATTERS! ❤ 🍦How do you like it, would you taste it? What do I turn into ice cream next? ✏ Write it in comment! 👇 And don't forget to subscribe here or I turn you into ice cream too! kzread.info/dron/LXjpKk7dEDPt3uiVGat2GQ.html
Nice!
Thanks!
Lecker 😋
😋
❤ YOUR FEEDBACK MATTERS! ❤ 🍦How do you like it, would you taste it? What do I turn into ice cream next? ✏️ Write it in comment! 👇 Subscribe here or I turn you into ice cream too! kzread.info/dron/LXjpKk7dEDPt3uiVGat2GQ.html
Oreo ice cream! 😋
Als nächstes Bananeneis 😍
What about the polishing? Any idea on that? 😢
Maybe shellac, or leaving so, like a Chocolat Bar
I was seriously thinking ikea hack and here it is. I am lucky I can canabalize another attachment that broke (slicer)
Would this work to convert a manual pasta cutter attatchment?
I don't know how strong is a pasta base. Test it and look were you can update it after maybe?
I am trying this now. Just bought the bowls from Ikea, and I'm getting a professional shop to cut and weld them. I also bought a cheap second hand meat grinder attachment for my Kenwood Chef - I'll use the attachment to adapt and throw the rest away. I'll post when it's done! The only thing that concerns me is the angle of the head.
How did it go??
I want to see it also! 😝
Can you give me the web site from ikea and the way to make attachment 😊
have you made it ?
Sir your contact no
Very unclear, no dimensions
The Goal was to give the Idea and the possibility of it.
Dude, you need to improve your print quality! lol
😝
How do you securely attach the two bowl halves together?
The best is to arc weld it, i can't do it, so i fix it together with Food safe Silicon
Hi, this was fantastic can you please share the materials so I can make one for my Kitchenaid?
Which one? For the little parts, i go to the hardware store with my construction and look what fit the best. 😂
⭐️⭐️⭐️⭐️⭐️ thank you
Which machine and model you use behind the Bowl???? Can you please tell me I wann a make it
You mean the kitchenaid Artisan ?
This is absolutely incredible
😂😂😂😂😂😂😂😂😂😂😂😂😂
😜
I'll really to have one, do you sell it? Hi guys, any links to buy one?
No sorry, but you can find something on google with :"kitchenaid panning"
Hmm I guess you have to actually have a 3d printer already to have this be legitimately about 30€.. bummer.
Yes, or maybe a friend that have one? You can also look on Google : "kitchenaid panning"
Did you have to scale the 'adapter 8' before printing it?
No, it fit well.
The magic of KZread Platform to express the Geniusly
I would like to make one
Do it! Maybe you have some friends that can help you.
@@gsicecreamuniverseI made it !!!!I use it for work it great thank you 😊
Hey Guillaume, could you share more details on how to make this? Did you draw the 3D printed parts yourself? Thanks O.
Hi, here are the link for them www.thingiverse.com/thing:39958 www.thingiverse.com/thing:431064
@@gsicecreamuniverseque tiene de diferente cada link...?
Can anyone link me the 3D Files. Not finding anything on Yeggi or Thingiverse. Thank you~
Did you glue the 3D printed parts together with the bolts and nuts? I'd like to make one of these.
Hi, no it fit good without but maybe you can do it, be careful if you glue the bearing.
My kitchenaid only has 1 stand. How do you manage to tilt the bowl in the right angle? Using the stand creates an angle that’s too big.. thanks!!
Check out the videos of confi kit, they made a 30 degree stainless steel wedge to put the KA on
I just wedged a piece of cardboard in the slot under the bowl.
You sir are a LEGEND!!!
Do you recall what are the dimensions of the bearings you used?
Yes I want to know this
I just print the part and go to the store with the parts to become the perfect fit for it, maybe you print yours and you become an another dimension for it.
At 0:55; how do you decide where you would cut the bowl? Or is this of no importance?
You can see a Coating pans and imagine if the hole is to small you can look nicely in it and work inside it, if it is to big the elements you put in will come out when it starts to turn
I'd love to learn how to make it!
Me too
See the video and ask me something ;-)
@@gsicecreamuniverse how can I make this on a delta mixer 5litre
Brilliant! Wish I had the tools to make one. They want $400-$600 dollars for these, which is crazy. What's even crazier is I'm about to buy one... (smh)
No, what is crazy is that is the perfect equipment I need for something that isn't even candy related and I'm looking at buying one, because goodness knows I don't have the ability to make one.
You can make it just with a bowl and another person which pours the chocolate in every 3-4 min while you stir constantly
Hello, that is brilliant, can i get the printing files? and which screws should be used?
The Files Names ist on the Video and on Thingiverse ;-) I used the Screw I had, I don't know yet, but you can just go to the Shop with your Parts and choose there.
Where did you get the steel bowl shape?
Ikea
@@gsicecreamuniversethe lien site for ikea
Do you make these for sale
No, sorry ;-/
Hi Kay, do you still need one made? We can do that for you! We are making several for ourselves.
Are you ordering the parts used here or designing your own?
@@aarenpolderman5809 designing our own. Also making low cost tempering machines. please email me at [email protected]. thanks
@@christopherhytryderrington Hi Christopher, I'm also trying to make one but I cannot seem to find the right screws and bearings. Would you mind sharing the dimensions you use? thanks in advance!
I don't have a 3d printer or dremel...
I made mine by myself with some guys in a workplace, for +350 euros
@@gsicecreamuniverse Do you also sell?