Those Yum Hellgrammites are pretty nice and great price! I got a bunch of bags when they 1st came out. I've seen anglers liking the side hook better. Good stuff
@goldentrucker792122 күн бұрын
Caught about 14 bass yesterday, mainly on the yum dinger & hellgramite. I do the side hook for best results
@kirkallen124624 күн бұрын
Good Luck out There! New to your Channel!
@bankrollproductiontv185629 күн бұрын
What cups and adapters are you using? I need the XL c frame myself for my 3500 dodge but they don't sell the XL c with cups and adapters.. I have a harbor freight ball joint kit.. could I use those adapters?
@goldentrucker792128 күн бұрын
I'm using the astro standard kit. You should be good. The Goliath is a good investment. Your harbor freight kit should work
@bankrollproductiontv185626 күн бұрын
@@goldentrucker7921 thanks buddy
@djustan3373Ай бұрын
Nothing quiter than conti terrain contact at
@Sangsinga682Ай бұрын
Car still in good condition. Must have clocked few hundred thousand miles.
@kenlusher9829Ай бұрын
Thanks for a great video...I especially appreciated the part numbers. Could you please show the number for the 24mm fill bolt. The previous owner rounded the head of this bolt and I sure do want to replace it. You also mentioned Ebay as a source but my search there has not been successful...Thank you very much and keep the videos coming.
@SkildLuresАй бұрын
I got one just for giggles and it actually works pretty good for how much it is
@ralphroadsАй бұрын
Really good tires, they do perform like the At3w but are lighter and cheaper.
@bigfattoniАй бұрын
How are the diamonds keeping up with time? Found lots of reviews and pictures of the fine side coming loose after a few uses and leaving only shiny steel. Now I am insecure about pass or give it a try 😅
@goldentrucker79215 күн бұрын
Sorry for the late response. I've used it about 15x so far so good.
@blakenelson4045Ай бұрын
Dude your horrible start over I'm going to a professional terrible job of explaining
@goldentrucker7921Ай бұрын
You probably shouldn't work on vehicles. Very easy job.
@razaliosman7083Ай бұрын
Sir did u have try use 20v battery for that tool...
@goldentrucker79215 күн бұрын
Negative. I'm on Milwaukee now
@ngirardo862 ай бұрын
My GMC Sierra has 44k on it and I did the diffs for the first time and it looked like new fluid still. What are you doing to that truck. Toyota isn’t what it used to be. Sad.
@lmalesci2 ай бұрын
Best regards from Italy, Florence and I, for my Suzuki Jimny 4x4 truck with a 1.3 lt gasoline m13a engine from 2001, I have 4 all-terrain Hankook dynapro atf RF 10 m+s tires in size 205-70-15 and I have a train of retreaded mud tires from the Italian brand ziarelli modello mud Power ziarelli MT 205-70-15 m+s !! (I am undecided between the two models of Kumho tires, the Kumho at 51 models and the other model the Kumho at 52, always in size 205-70-15!)
@CLAPBOMBBARDOWNSKI8102 ай бұрын
Can i sharpen my d2 knifes with this?
@goldentrucker79212 ай бұрын
Yes 100%
@CLAPBOMBBARDOWNSKI8102 ай бұрын
@@goldentrucker7921 ok thank you
@stevom1902 ай бұрын
may I ask how deep the tread was when they were new?
@user-si7ew9we4g2 ай бұрын
Do you have any oil leaks from any gaskets or seals from the engine and if so at what mileage or year?
@SecurityZone12 ай бұрын
This is the outcome of not listening to know it all on KZread that say use amsoil change your oil every 45,000 miles 😂🤦🏽♂️ KEEP UP THE GOOD WORK BROTHER!
@goldentrucker79212 ай бұрын
The proof is opening up the valve covers . Then you can really see the difference.
@gamerscore882 ай бұрын
Awesome video. I am due for my 30k maintenance and this will help a lot
@SecurityZone12 ай бұрын
💪🏽💯 u inspired me to change from 5k to 3k starting today! THANKS! 🙏🏽👍🏽
@harmonicliving35073 ай бұрын
Nice saws
@sgoldste023 ай бұрын
Thanks for the detailed video. I am struggling mightily to find the part number for the fill plug and o-ring. Searched on Amazon, e-Bay, and the general web. Can't believe how hard this is to identify. Do you know?
@goldentrucker79213 ай бұрын
90341-18059- FILL PLUG 90301-15004- O-RING GASKET
@goldentrucker79213 ай бұрын
Call any toyota dealership. They can have the part for you in 2 days. Ebay also is another option.
@sgoldste023 ай бұрын
@@goldentrucker7921 Or is that the part for the overflow bolt?
@goldentrucker79213 ай бұрын
@sgoldste02 not sure what parts you need. You only need drain plug crush washer, and fill plug o-ring. Plus fluids. Everything is listed in the comments or in the video
@sgoldste023 ай бұрын
@@goldentrucker7921 I want to replace all of the gaskets. I found the transmission drain plug gasket easily. But the fill bolt (the 24mm bolt showing "WS" in this video) also has an o-ring, and I can't find that part. I'm also guessing that fill level bolt has a gasket, but I can't find that part either.
@skyelee93983 ай бұрын
18k Rope chain. How much did you pay.
@HardRockVermont3 ай бұрын
This is an excellent saw, durability and power are excellent! This coming from a 30 year Husqvarna operator, in my experience, the X Series is as good as anything out there. Run 95 Octane Ethenol Free and hang on!
@HardRockVermontАй бұрын
@AnonbinArymouse-nm4ud Any dealer that carries Husqvarna Pre Mix like Tractor Supply, Husqvarna Pro Shops, etc.
@royfarelas43273 ай бұрын
What is the size of the bar?
@user-zg9gh4tx7e4 ай бұрын
Μας δουλεύετε ρε παιδιά...; Αυτά είναι ξύλα διαμέτρου για πριόνια της σειράς 3ών hp...!!
@Noamchomsky2644 ай бұрын
Great job and thanks a million for posting . You are a lifesaver
@peteygnyc4 ай бұрын
Is it the M18 crush washer? If not, what size is it?
@anthonymakley15304 ай бұрын
Dude if those tires have been on there for a year you sure only drive it on Sundays for church
@kylemiller66394 ай бұрын
great tutorial. I inherited a 186k mile 2004 ES330 and have been doing a deep dive into it's service records. It looks like Lexus Dealer initially defaulted to 30k interval service for the transmission, although that seems to have disappeared after it's 90k service and seems to never be mentioned or recommended by Dealer again. The 30k service includes the description: "... REPLACED TRANSMISSION FLUID, REPLACED DIFFERENTIAL FLUID, ..." and includes parts charge for 00279-000T4-01 ATF T-IV quantity #4 (that sounds right to me) but also includes parts charge for "DIFF GEAR LUB, BULK" quantity #2. Was this a mistake or scam? or just an poorly done auto-generated generic charge sheet? I thought that in this vehicle the front differential is combined with the automatic transmission (U151E) into a unit referred to by Toyota as "TRANSAXLE, FRONT" and fluid service is ONLY ATF T-IV. In other words - there is no separate front differential, correct? clarity would be much appreciated. My Dad sunk a lot in repairs into this car including a/c control motor, pass side air mix motor, (unrepaired sunroof), driver side blower servo, cracked dogbone, a/c compressor, and the inevitable 3MZ-FE valve cover gaskets. He also blew through gobs of tires and brake parts - IDK if that's typical or a result of how/where he drove in mountainous upstate SC. To be fair, problems only started accruing after ~100k. I did managed to swap out #1 cylinder coil wo the elaborate air plenum removal after it failed. I've got an AWD Highlander Hybrid w the 3MZ-FE and another with the 1MZ-FE so I've been down that road twice. Both due for Timing Belts - which I've never attempted before ..... Which is more important: mileage or elapsed time?
@joev17794 ай бұрын
Good video. Thanks
@kanegorgeous30464 ай бұрын
Regardless what type of Pit he is APBT, Amstaff🤔He is🥰cute
@TheBoneScrapper5 ай бұрын
Thank you
@carloscortes15205 ай бұрын
These dipsticks are so hard to read lol
@hanyarian68575 ай бұрын
So when you add the 3 quart still was low and you did add 1/3 quart and was good level Do you you recommend adding 3,2 quart and then check the stream after , appreciate your reply
@hanyarian68575 ай бұрын
How many quart it took Cause mine drained 2.5 and i put 2.5 but still feels its low
@940joey25 ай бұрын
Great video man !! What are the odds they this is the video I clicked I’m also in north east PA !!! I’m looking to get one of these saws, where did you pick this on up at ? I was going to check out pocono lake supply
@michaeldzema42725 ай бұрын
Going to be doing this asap ! I gotta put in work to get it msrp
@YT-SCAR_xBULLETZ5 ай бұрын
WHAT ABOUT THE OTHER SIDE OF THE PVC. YOU GOTTA FILTER OUT BOTH SIDES; NOT JUST ONE
@divontaecarver8754 ай бұрын
Nobody has a video about both….
@fandechavalones30225 ай бұрын
do you change transmission fluid too or leave it alone ?
@goldentrucker79212 ай бұрын
Yes. I do drain & fills annually on atf fluid. We drive a lot though.
@fandechavalones30222 ай бұрын
@@goldentrucker7921 like 30,000 or sooner ?
@5.Sloliveros5 ай бұрын
Hi I used the same exact oil for my 2021 Mustang gt but now every time I remote start or cold start I hear this loud piston slap. Didn’t happen before w the old oil I bought it with.. what could be the issue?
@rodrigovillarreal67544 ай бұрын
I had a ticking noise after I did an oil change in my car and didn’t know what that was until a ford master tech told me it was the notorious “coyote tick” I added an additive and it got rid of it. I recommend the liqui moly ceratec that’s the one I use
@5.Sloliveros4 ай бұрын
@@rodrigovillarreal6754 do you use both bottles or just one? I used one it comes here and there
Пікірлер
Super-Dave-Outdoors ports these chainsaws. I have a ported 7310, and boy I love it.
They're awesome ported
Hi brother can i use 75w140 for tha same taco
I'd go 75w-90
Have to give them a try. I favor the cinnamon brown and goby👍
Doesn't get much better than these
Holding up well? Dogs tearing up bottom at all?
Very well. No rips.
Looks badass!
Mine broke on the first fish I got me a nice 15 pound gar
fantastic dog man
What height RaceRamps did you go with?
@@chrisreicherts7332 www.raceramps.com/ramps/race/p/rr-56/
@@goldentrucker7921 thank you!!
Cute pup
Those Yum Hellgrammites are pretty nice and great price! I got a bunch of bags when they 1st came out. I've seen anglers liking the side hook better. Good stuff
Caught about 14 bass yesterday, mainly on the yum dinger & hellgramite. I do the side hook for best results
Good Luck out There! New to your Channel!
What cups and adapters are you using? I need the XL c frame myself for my 3500 dodge but they don't sell the XL c with cups and adapters.. I have a harbor freight ball joint kit.. could I use those adapters?
I'm using the astro standard kit. You should be good. The Goliath is a good investment. Your harbor freight kit should work
@@goldentrucker7921 thanks buddy
Nothing quiter than conti terrain contact at
Car still in good condition. Must have clocked few hundred thousand miles.
Thanks for a great video...I especially appreciated the part numbers. Could you please show the number for the 24mm fill bolt. The previous owner rounded the head of this bolt and I sure do want to replace it. You also mentioned Ebay as a source but my search there has not been successful...Thank you very much and keep the videos coming.
I got one just for giggles and it actually works pretty good for how much it is
Really good tires, they do perform like the At3w but are lighter and cheaper.
How are the diamonds keeping up with time? Found lots of reviews and pictures of the fine side coming loose after a few uses and leaving only shiny steel. Now I am insecure about pass or give it a try 😅
Sorry for the late response. I've used it about 15x so far so good.
Dude your horrible start over I'm going to a professional terrible job of explaining
You probably shouldn't work on vehicles. Very easy job.
Sir did u have try use 20v battery for that tool...
Negative. I'm on Milwaukee now
My GMC Sierra has 44k on it and I did the diffs for the first time and it looked like new fluid still. What are you doing to that truck. Toyota isn’t what it used to be. Sad.
Best regards from Italy, Florence and I, for my Suzuki Jimny 4x4 truck with a 1.3 lt gasoline m13a engine from 2001, I have 4 all-terrain Hankook dynapro atf RF 10 m+s tires in size 205-70-15 and I have a train of retreaded mud tires from the Italian brand ziarelli modello mud Power ziarelli MT 205-70-15 m+s !! (I am undecided between the two models of Kumho tires, the Kumho at 51 models and the other model the Kumho at 52, always in size 205-70-15!)
Can i sharpen my d2 knifes with this?
Yes 100%
@@goldentrucker7921 ok thank you
may I ask how deep the tread was when they were new?
Do you have any oil leaks from any gaskets or seals from the engine and if so at what mileage or year?
This is the outcome of not listening to know it all on KZread that say use amsoil change your oil every 45,000 miles 😂🤦🏽♂️ KEEP UP THE GOOD WORK BROTHER!
The proof is opening up the valve covers . Then you can really see the difference.
Awesome video. I am due for my 30k maintenance and this will help a lot
💪🏽💯 u inspired me to change from 5k to 3k starting today! THANKS! 🙏🏽👍🏽
Nice saws
Thanks for the detailed video. I am struggling mightily to find the part number for the fill plug and o-ring. Searched on Amazon, e-Bay, and the general web. Can't believe how hard this is to identify. Do you know?
90341-18059- FILL PLUG 90301-15004- O-RING GASKET
Call any toyota dealership. They can have the part for you in 2 days. Ebay also is another option.
@@goldentrucker7921 Or is that the part for the overflow bolt?
@sgoldste02 not sure what parts you need. You only need drain plug crush washer, and fill plug o-ring. Plus fluids. Everything is listed in the comments or in the video
@@goldentrucker7921 I want to replace all of the gaskets. I found the transmission drain plug gasket easily. But the fill bolt (the 24mm bolt showing "WS" in this video) also has an o-ring, and I can't find that part. I'm also guessing that fill level bolt has a gasket, but I can't find that part either.
18k Rope chain. How much did you pay.
This is an excellent saw, durability and power are excellent! This coming from a 30 year Husqvarna operator, in my experience, the X Series is as good as anything out there. Run 95 Octane Ethenol Free and hang on!
@AnonbinArymouse-nm4ud Any dealer that carries Husqvarna Pre Mix like Tractor Supply, Husqvarna Pro Shops, etc.
What is the size of the bar?
Μας δουλεύετε ρε παιδιά...; Αυτά είναι ξύλα διαμέτρου για πριόνια της σειράς 3ών hp...!!
Great job and thanks a million for posting . You are a lifesaver
Is it the M18 crush washer? If not, what size is it?
Dude if those tires have been on there for a year you sure only drive it on Sundays for church
great tutorial. I inherited a 186k mile 2004 ES330 and have been doing a deep dive into it's service records. It looks like Lexus Dealer initially defaulted to 30k interval service for the transmission, although that seems to have disappeared after it's 90k service and seems to never be mentioned or recommended by Dealer again. The 30k service includes the description: "... REPLACED TRANSMISSION FLUID, REPLACED DIFFERENTIAL FLUID, ..." and includes parts charge for 00279-000T4-01 ATF T-IV quantity #4 (that sounds right to me) but also includes parts charge for "DIFF GEAR LUB, BULK" quantity #2. Was this a mistake or scam? or just an poorly done auto-generated generic charge sheet? I thought that in this vehicle the front differential is combined with the automatic transmission (U151E) into a unit referred to by Toyota as "TRANSAXLE, FRONT" and fluid service is ONLY ATF T-IV. In other words - there is no separate front differential, correct? clarity would be much appreciated. My Dad sunk a lot in repairs into this car including a/c control motor, pass side air mix motor, (unrepaired sunroof), driver side blower servo, cracked dogbone, a/c compressor, and the inevitable 3MZ-FE valve cover gaskets. He also blew through gobs of tires and brake parts - IDK if that's typical or a result of how/where he drove in mountainous upstate SC. To be fair, problems only started accruing after ~100k. I did managed to swap out #1 cylinder coil wo the elaborate air plenum removal after it failed. I've got an AWD Highlander Hybrid w the 3MZ-FE and another with the 1MZ-FE so I've been down that road twice. Both due for Timing Belts - which I've never attempted before ..... Which is more important: mileage or elapsed time?
Good video. Thanks
Regardless what type of Pit he is APBT, Amstaff🤔He is🥰cute
Thank you
These dipsticks are so hard to read lol
So when you add the 3 quart still was low and you did add 1/3 quart and was good level Do you you recommend adding 3,2 quart and then check the stream after , appreciate your reply
How many quart it took Cause mine drained 2.5 and i put 2.5 but still feels its low
Great video man !! What are the odds they this is the video I clicked I’m also in north east PA !!! I’m looking to get one of these saws, where did you pick this on up at ? I was going to check out pocono lake supply
Going to be doing this asap ! I gotta put in work to get it msrp
WHAT ABOUT THE OTHER SIDE OF THE PVC. YOU GOTTA FILTER OUT BOTH SIDES; NOT JUST ONE
Nobody has a video about both….
do you change transmission fluid too or leave it alone ?
Yes. I do drain & fills annually on atf fluid. We drive a lot though.
@@goldentrucker7921 like 30,000 or sooner ?
Hi I used the same exact oil for my 2021 Mustang gt but now every time I remote start or cold start I hear this loud piston slap. Didn’t happen before w the old oil I bought it with.. what could be the issue?
I had a ticking noise after I did an oil change in my car and didn’t know what that was until a ford master tech told me it was the notorious “coyote tick” I added an additive and it got rid of it. I recommend the liqui moly ceratec that’s the one I use
@@rodrigovillarreal6754 do you use both bottles or just one? I used one it comes here and there
lol....such a small opening for that container!!