We've been making rugged and reliable outdoor power equipment since 1937. Here you'll find videos about maintenance tips, product information and the tests our lawn and garden equipment go through to prove that each unit is built for life.
Bought one on market place. Worked good but had a hell of a time stringing it. Watche the video an the spring is missing
@noeltheshemale3 күн бұрын
What about the ones with 2 spools? How do you thread those?
@DGQ1Q23 күн бұрын
Thanks you explained so easy,
@charlesmaines22924 күн бұрын
Any chance you show how to replace the pull cord?
@phongle64106 күн бұрын
Thanks a lot for show me how to do it ❤😂
@nickw44187 күн бұрын
I love my dad's Troy built mustang
@ermero90257 күн бұрын
Thanks 🙏
@bedub33699 күн бұрын
You video is terrible didn't help
@daviru0210 күн бұрын
One of life's great mysteries is solved! Thank you very much!
@brentsrx712 күн бұрын
This completely changed my perception of your brand.
@glenmcarroll16 күн бұрын
Thanks for hiding the blade change with the gloves.
@davidkeenan441018 күн бұрын
Are gearbox upgrades available? I have this same unit and it has very little power, some grass roots are stopping the times. It spins fast and digs good, until it encounters resistance.
@azdigbee18 күн бұрын
Bullshit..... you DO NOT need to remove the deck to replace the deck belt....... all that extra work for nothing !
@JJakeIngram19 күн бұрын
Nice and very helpful video. Thanks!
@malacaifowler-macneil966522 күн бұрын
What a useless fucking video
@marks226824 күн бұрын
Had this for about 10 years. Very powerful and reliable
@whitelight99928 күн бұрын
NEVER starts brand new
@bakmahon88829 күн бұрын
I JUST CHANGED OIL YESTERDAY, I PUT 20 OUNCES IN IT, I CHECKED AND IT FULL.
@jugger1829 күн бұрын
IS the tug he does at the end to release the string from the notches? My bump feed does not work and I cant see how it would with the string in those notches
@jdurso9602Ай бұрын
Does the pre filter go on with the foam side towards the engine or facing the air filter? My mower’s pre filter has foam on one side and a fibreglass screen on the other. Which way does it go on.
@stevenbushor3166Ай бұрын
What are the carburetor 1:48 adjustments for a tb22
@TheHypnotstCollectorАй бұрын
I used a modified version of this technique:: See that block of wood? I used one. Placed an extension on the torque wrench for easy torque..... SO, I kept the deck on the mower. When I retorqued the nut I put some snake oil on the threads to prevent seizing from rust etc.
@user-xw8iz2xi2fАй бұрын
New gas spark plugs good
@user-xw8iz2xi2fАй бұрын
How about mine a year ago started it up used it last year put it up this year now I can't get the damn thing to f****** start
@mrstevek118Ай бұрын
Why do I have to keep my foot on the brake all the time. If I let it off it goes to fast to cut the grass. I have the throttle up to to keep the blades going fast enough to cut the grass
@KilroyWasHere-cb8qwАй бұрын
I had to use an oil filter wrench and channel locks to get the thing off. Turn it to the right, but not the left?
@briancorso186Ай бұрын
You’re wrong. It doesn’t twist off
@Thomas63r2Ай бұрын
I have the Cub Cadet VT100 version - the same as the TB, just different handlebars and it has a front bumper that the TB does not. It’s the best tiller for clay soil. If you till through roots or vines they can wrap around the tine drive shafts and tear the seals. Like all roto tillers, be sure to check the transmission oil level prior to use for best longevity. Also like all tillers; when new be sure to grease up the axles that the wheels bolt onto - or deal with difficult to remove wheels that later rust onto the axles.
@iangeesaman4797Ай бұрын
Have you assholes ever heard of a oil drain plug
@Matty_ice429Ай бұрын
Seems highly inefficient for 12 inches of line.
@dinajanke5158Ай бұрын
no holes in mine on the side that says rewind line. still confused if I make a loop or have 2 separate strings.
@DavidLeMasters-ij2geАй бұрын
Remove guards Remove old belt Loosen 9/16 bolt on right outside pulley- using 9/16 socket on top and 9/16 wrench to hold on bottom - don’t remove just tilt it enough to get new belt over pulley. Remove belt keep med wire over front drive pulley - (9/16 bolt on left and other end slips into place through frame hole-route new pulley and tighten right pulley using socket and wrench. Test new belt with tension lever and use your hands to pull belt through its path for blades to turn. Use any adhesive tape to tape 9/16” bolt to the socket ( make hole for threads ) Mount wire keeper in place. I leave the tape and don’t put L & R guards back in place- I do put all 6 bolts for guards back on deck to keep grass out of holes Good luck
@CostFrostАй бұрын
This is stupid
@WilliamStarks-ht4udАй бұрын
How to change oil on troy built tb200
@nickfloris103Ай бұрын
Why would my Troy Bilt TB475SS feeds string too easily. Please and Thank you
@josephkuser3998Ай бұрын
I needed this video. Thanks
@chrisohagan4825Ай бұрын
I just put 10 metres on mine... il let you know if the bump works ok
@bgore12Ай бұрын
Absolutely awesome, i was only pushing the bulb 5 times, thought i was just going to buy an electric weedeater. thank you thank you
@jeffrowmcshane1774Ай бұрын
Why does my mower same year, same type look nothing like this. Oh well. Where’s the duct tape
@DeanoKelleyАй бұрын
Has anyone had any luck finding FLEX Accessories anymore? I was an early adopter, actually the first person in our area to purchase one from any of the Lowes within 100 miles. I now have 2 power bases, 2 mower decks, snow blower, aerator, dethatcher and pressure washer. I'm really interested in the chipper and possibly the blower, but missed them a few years ago when Troy-Bilt clearanced them off of their website. Due to weight, it doesn't make a lot of sense to ship these, so looking for something on the East Coast within a few hours of Southwestern VA, but I know that's optimistic. Thanks in advance for your reply...
@jakekingsbury6961Ай бұрын
This company has the worst customer service ever!!!
@dwwmoonАй бұрын
I have to say, we had the hvac contract in Charlotte NC for the testing of different riders, Troy bilt, cub cadet, mtd, a few others & I was amazed at the brutal work out given these riders, I’ve seen folks driving these over steel bars all day, plus the shaking machine to see how long the frame would last till something broke . Just saying .
@B4UClose2 ай бұрын
Here's a simpler way to change the deck belt. kzread.info/dash/bejne/ial_rtiiqtXFgqw.html
@Yard-Manfix32 ай бұрын
I hate mine
@jeannej95252 ай бұрын
I just want to say that I have been looking for an hour for these instructions. THANK YOU!
@trehbaker11122 ай бұрын
I'm 30 Years old and just found out iv been loading it wrong my whole life lmfao 😂
@stevenleek12542 ай бұрын
What garbage. You don't need to drop the deck. They just want to overwhelm you so you have to take it to their overpriced dealer
@BrianB55Ай бұрын
True that I did it without removing anything and the spring still attached
@armsnleggs2 ай бұрын
My adjustment knob on the left side hanger doesn't turn either way. Even after loosening the 1/2 in hex bolt. What are we supposed to turn the knob with? Pliers will not tighten or loosen the adjustment knob
Пікірлер
Thank you for posting this!!
Bought one on market place. Worked good but had a hell of a time stringing it. Watche the video an the spring is missing
What about the ones with 2 spools? How do you thread those?
Thanks you explained so easy,
Any chance you show how to replace the pull cord?
Thanks a lot for show me how to do it ❤😂
I love my dad's Troy built mustang
Thanks 🙏
You video is terrible didn't help
One of life's great mysteries is solved! Thank you very much!
This completely changed my perception of your brand.
Thanks for hiding the blade change with the gloves.
Are gearbox upgrades available? I have this same unit and it has very little power, some grass roots are stopping the times. It spins fast and digs good, until it encounters resistance.
Bullshit..... you DO NOT need to remove the deck to replace the deck belt....... all that extra work for nothing !
Nice and very helpful video. Thanks!
What a useless fucking video
Had this for about 10 years. Very powerful and reliable
NEVER starts brand new
I JUST CHANGED OIL YESTERDAY, I PUT 20 OUNCES IN IT, I CHECKED AND IT FULL.
IS the tug he does at the end to release the string from the notches? My bump feed does not work and I cant see how it would with the string in those notches
Does the pre filter go on with the foam side towards the engine or facing the air filter? My mower’s pre filter has foam on one side and a fibreglass screen on the other. Which way does it go on.
What are the carburetor 1:48 adjustments for a tb22
I used a modified version of this technique:: See that block of wood? I used one. Placed an extension on the torque wrench for easy torque..... SO, I kept the deck on the mower. When I retorqued the nut I put some snake oil on the threads to prevent seizing from rust etc.
New gas spark plugs good
How about mine a year ago started it up used it last year put it up this year now I can't get the damn thing to f****** start
Why do I have to keep my foot on the brake all the time. If I let it off it goes to fast to cut the grass. I have the throttle up to to keep the blades going fast enough to cut the grass
I had to use an oil filter wrench and channel locks to get the thing off. Turn it to the right, but not the left?
You’re wrong. It doesn’t twist off
I have the Cub Cadet VT100 version - the same as the TB, just different handlebars and it has a front bumper that the TB does not. It’s the best tiller for clay soil. If you till through roots or vines they can wrap around the tine drive shafts and tear the seals. Like all roto tillers, be sure to check the transmission oil level prior to use for best longevity. Also like all tillers; when new be sure to grease up the axles that the wheels bolt onto - or deal with difficult to remove wheels that later rust onto the axles.
Have you assholes ever heard of a oil drain plug
Seems highly inefficient for 12 inches of line.
no holes in mine on the side that says rewind line. still confused if I make a loop or have 2 separate strings.
Remove guards Remove old belt Loosen 9/16 bolt on right outside pulley- using 9/16 socket on top and 9/16 wrench to hold on bottom - don’t remove just tilt it enough to get new belt over pulley. Remove belt keep med wire over front drive pulley - (9/16 bolt on left and other end slips into place through frame hole-route new pulley and tighten right pulley using socket and wrench. Test new belt with tension lever and use your hands to pull belt through its path for blades to turn. Use any adhesive tape to tape 9/16” bolt to the socket ( make hole for threads ) Mount wire keeper in place. I leave the tape and don’t put L & R guards back in place- I do put all 6 bolts for guards back on deck to keep grass out of holes Good luck
This is stupid
How to change oil on troy built tb200
Why would my Troy Bilt TB475SS feeds string too easily. Please and Thank you
I needed this video. Thanks
I just put 10 metres on mine... il let you know if the bump works ok
Absolutely awesome, i was only pushing the bulb 5 times, thought i was just going to buy an electric weedeater. thank you thank you
Why does my mower same year, same type look nothing like this. Oh well. Where’s the duct tape
Has anyone had any luck finding FLEX Accessories anymore? I was an early adopter, actually the first person in our area to purchase one from any of the Lowes within 100 miles. I now have 2 power bases, 2 mower decks, snow blower, aerator, dethatcher and pressure washer. I'm really interested in the chipper and possibly the blower, but missed them a few years ago when Troy-Bilt clearanced them off of their website. Due to weight, it doesn't make a lot of sense to ship these, so looking for something on the East Coast within a few hours of Southwestern VA, but I know that's optimistic. Thanks in advance for your reply...
This company has the worst customer service ever!!!
I have to say, we had the hvac contract in Charlotte NC for the testing of different riders, Troy bilt, cub cadet, mtd, a few others & I was amazed at the brutal work out given these riders, I’ve seen folks driving these over steel bars all day, plus the shaking machine to see how long the frame would last till something broke . Just saying .
Here's a simpler way to change the deck belt. kzread.info/dash/bejne/ial_rtiiqtXFgqw.html
I hate mine
I just want to say that I have been looking for an hour for these instructions. THANK YOU!
I'm 30 Years old and just found out iv been loading it wrong my whole life lmfao 😂
What garbage. You don't need to drop the deck. They just want to overwhelm you so you have to take it to their overpriced dealer
True that I did it without removing anything and the spring still attached
My adjustment knob on the left side hanger doesn't turn either way. Even after loosening the 1/2 in hex bolt. What are we supposed to turn the knob with? Pliers will not tighten or loosen the adjustment knob
Which way do you turn the red knob to wind string