when it comes to your edge beveler, what is the difference between DC53 and M390? and the price is different as well.
@WUTAleather2 ай бұрын
The carbon content of the materials is different. The hardness of dc53 is about 62-63HRC. The toughness is relatively good, but the wear resistance is relatively poor. The hardness of m390 is about 60-62HRC. It has high hardness but relatively poor toughness. The composition of m390 contains a large amount of molybdenum and chromium, so its production difficulty and cost are relatively high, so the price is much higher than that of dc53.
@alioncel69532 ай бұрын
thank you
@user-gt3cz9ph2i2 ай бұрын
Скажите, пожалуйста кожа какой толщины?
@frost_05562 ай бұрын
Not for use on plate😊 plate injured😊 shop ,buy new plate😊
@patticampbellhardy40593 ай бұрын
What kind of snap did you use and where did you buy the snaps?
Please make the hole a bit slanted for the residue to come outside easier.. the current design hole is vertical.. and made the leather residue unable to go out from the body.. hope u understand ❤❤
@WUTAleather4 ай бұрын
OK, thank you for the reminder
@ianknight20534 ай бұрын
I bought some of you pricking irons, one of which broke and you won’t replace it. I won’t be buying from you again.
@Shlomography4 ай бұрын
How did you make the key fob out of leather in the video? I’ve never seen leather shaped like that. Can you upload a video with some more details about that?
@patriotcam17764 ай бұрын
The left and right hands are switched. I bought a right hand and I got a left hand. Be more clear.
@romeitaly85245 ай бұрын
lol did you really just make a fake Hermes belt…besides that good video to watch
@combincombin4205 ай бұрын
Very nice! What are the tool brand do you use for round holes for stiching?
@WUTAleather5 ай бұрын
WUTA brand wutaleather.com/
@user-tp8qv4rt2w5 ай бұрын
Подскажите что за краску по урезу используете.
@xyridius5165 ай бұрын
What about the small edge bevelers? How do you use the smaller ridges for those?
@WUTAleather5 ай бұрын
Very small ones can use sandpaper, our tools are equipped with corresponding sizes
@mintstreaks5 ай бұрын
Can I buy one bag?
@silvanapaulamachado93346 ай бұрын
Eu queria uma ferramenta dessas...não tenho chanfradeira...onde compro???
@WUTAleather6 ай бұрын
shopify online store:wutaleather.com/
@gabbysparks35046 ай бұрын
I just love how you don't provide a link anywhere or tell us where to get it at all 🙄
Does the Hollow Hole Punch leave any kind of burr on the exit side of the Plastic/Mylar sheet? What base would you recommend to punch on that wouldn't allow Burr's on the exit side? Would MDF be OK to punch on?
@ramelsen10 ай бұрын
what is the thickness of the leather? Can you link it to me?
Пікірлер
Handle is too short.. 😢
Hi, great work.Where did you the edge dye from?
wutaleather.com/products/pure-neatsfoot-oil-leather-conditioner-softener
👍👍👍😍
I want to make this. Bag that’s why I’m here
❤❤❤😊
流石にWUTAの動画ですね、コバ処理や作品の完成度が芸術的に美しいです。❤
ありがとう
Where can I find more information about that embossing machine?
Official Website:wutaleather.com/
Love this! TFS
thanks
What is solution you use on 2.06s ? . I don't believe it is edge paint. Could you tell me what is that stuff?
it is beautiful. thanks for sharing. stunning work.
thanks
Price
wutaleather.com/products/leather-punches-round-hole
Brass hoop? Ferrule
Belinya dimana bg
when it comes to your edge beveler, what is the difference between DC53 and M390? and the price is different as well.
The carbon content of the materials is different. The hardness of dc53 is about 62-63HRC. The toughness is relatively good, but the wear resistance is relatively poor. The hardness of m390 is about 60-62HRC. It has high hardness but relatively poor toughness. The composition of m390 contains a large amount of molybdenum and chromium, so its production difficulty and cost are relatively high, so the price is much higher than that of dc53.
thank you
Скажите, пожалуйста кожа какой толщины?
Not for use on plate😊 plate injured😊 shop ,buy new plate😊
What kind of snap did you use and where did you buy the snaps?
shopify online store:wutaleather.com/
Can I get it for free 😅
shopify online store:wutaleather.com/products/adjustable-screw-hole-punch-with-6-tip-sizes-wuta
Инструменты WUTA очень красивые,качественные,но очень дорогие...😢
Но он служит дольше и работает лучше, не так ли?
Thank you for sharing
you're welcome
Also, I posted a review on the Wuta website which wasn’t published, so I wrote a 2nd review, which also wasn’t published. This is just dishonest.
price sir
shopify online store:wutaleather.com/products/replaceable-circle-leather-hole-punch
Please make the hole a bit slanted for the residue to come outside easier.. the current design hole is vertical.. and made the leather residue unable to go out from the body.. hope u understand ❤❤
OK, thank you for the reminder
I bought some of you pricking irons, one of which broke and you won’t replace it. I won’t be buying from you again.
How did you make the key fob out of leather in the video? I’ve never seen leather shaped like that. Can you upload a video with some more details about that?
The left and right hands are switched. I bought a right hand and I got a left hand. Be more clear.
lol did you really just make a fake Hermes belt…besides that good video to watch
Very nice! What are the tool brand do you use for round holes for stiching?
WUTA brand wutaleather.com/
Подскажите что за краску по урезу используете.
What about the small edge bevelers? How do you use the smaller ridges for those?
Very small ones can use sandpaper, our tools are equipped with corresponding sizes
Can I buy one bag?
Eu queria uma ferramenta dessas...não tenho chanfradeira...onde compro???
shopify online store:wutaleather.com/
I just love how you don't provide a link anywhere or tell us where to get it at all 🙄
shopify online store:wutaleather.com/products/manual-button-installation-tool-eyelet-hand-pressing-machine
Make a mold where ???
Comments nur saifullah Add a comment... @nursaifullah9626 @nursaifullah9626 0 seconds ago Make a mold where ??? Reply Make a mold where ???
How to buy allenkey screws?
shopify online store:wutaleather.com/
Harga bg
Thank you very much for the video! Can I ask where to get the buckle please?
shopify online store:wutaleather.com/
定制一个
给去做一个?
How to get one
shopify online store:wutaleather.com/products/replaceable-circle-leather-hole-punch
A comment for your algorithm!
How did you stamp lock/unclock?
Thanks for the demo
👍
How did you put the design on the leather?
Does the Hollow Hole Punch leave any kind of burr on the exit side of the Plastic/Mylar sheet? What base would you recommend to punch on that wouldn't allow Burr's on the exit side? Would MDF be OK to punch on?
what is the thickness of the leather? Can you link it to me?
gracias
Very nice, how to get the pattern please