Пікірлер

• 
  @MikaylaFitzpatrick-c8v8 күн бұрын

  I have the solid blue version of this controller and R2 will continuously "fire" while gaming, how can that be fixed?

• 
  @BRGKasumi77Main24 күн бұрын

  Maybe both APU and Southbridge are faulty. Try to replace with a new southbridge chip and reball the APU's soldering joints!

• 
  @emirozuberk7476Ай бұрын

  I need help. When i click to right side just I hear a noise but on the left side there is nothing and addition blue light doesn’t work.

• 
  @iestyndavies72872 ай бұрын

  So pouring the Hydrogen Peroxide directly onto the LED strip lighting is perfectly fine?

• 
  @captnrobin2752 ай бұрын

  Look at 7:00 - there is another box inbetween

• 
  @_halloween_48783 ай бұрын

  I was cleaning my ps now wont turn on

• 
  @djlancematthew3 ай бұрын

  You didn’t check the old power supply to see if it worked with a multimeter!?

• 
  @user-wr4jd9yc5u2 ай бұрын

  I've even done that on a power supply I've got around to check for 5v and 12v there, and I'm not a technician.

• 
  @AliAhmed-tp8hn3 ай бұрын

  Do more videos of this ps4 pro

• 
  @ray-zs9df4 ай бұрын

  Mine did this all I needed to do was reinstall the firmware again from scratch like wipe the hard drive completely then redo it

• 
  @MarioCalvisiWD4 ай бұрын

  but your console give you image..?.. how can your reinstall the firmware without image...

• 
  @violetab88764 ай бұрын

  Do more videos with this broken ps4 pls😊

• 
  @trendingfootshorts4 ай бұрын

  u wast my time

• 
  @user-qg8bt5qe1g4 ай бұрын

  You are stupid and your work is slow

• 
  @peppe_repairs3 ай бұрын

  Remember to subscribe! :)

• 
  @japhethjenzy12 ай бұрын

  ​@@peppe_repairs😅

• 
  @smoky_health_764 ай бұрын

  Could you send a link for where you got the replacement buttons from? I have the exact problem with my controller and dont know where to look for the buttons. Thanks

• 
  @peppe_repairs4 ай бұрын

  www.aliexpress.com/item/1005006269874210.html

• 
  @xboxudvarhely84004 ай бұрын

  Read the nor. Enable uart. It could be anything...

• 
  @poklonickaputovanja13454 ай бұрын

  check for shorts under SB

• 
  @jossefoxcaicedo98114 ай бұрын

  Sony Computer entertainment american ecsea congratulation men aguante P4slim🎉🎉🎉🎉🎉🎉

• 
  @bytemegoa4 ай бұрын

  Just enable UART and check the fault.

• 
  @waynetemplar21835 ай бұрын

  I think that's the reddest PS3 controller I've ever seen

• 
  @awaisasjad52165 ай бұрын

  Plese repair the l2 nacon controller botten

• 
  @peppe_repairs5 ай бұрын

  I will if i someday get controller with that fault. Thanks for the comment! :)

• 
  @Smoukki855 ай бұрын

  hyvä!!!

• 
  @TehAlekzi5 ай бұрын

  Thank you! 😹

• 
  @hakialyassiri80896 ай бұрын

  Holy crap the same exact resistor broke on mine and I watched this and sure enough resoldering fixed it! Thank you man!!

• 
  @peppe_repairs6 ай бұрын

  Thank you! Nice to know that the video helped you to fix your console! :)

• 
  @TijlDaelemans7 ай бұрын

  Looking forward to seeing the results, bit something tells me we never will, the video was posted 10 months ago 😅

• 
  @TijlDaelemans7 ай бұрын

  Looking forward to seeing the results 😊

• 
  @peppe_repairs7 ай бұрын

  This one was hard but it's getting there, i had to do the process multiple times. Also having been busy with other stuff so that's why it's been delayed :D

• 
  @TijlDaelemans7 ай бұрын

  @@peppe_repairs why do you use oxi action instead of real water peroxide? I think it will go a lot faster using water peroxide.

• 
  @peppe_repairs6 ай бұрын

  Oxi action is lot cheaper. Someday i will test water peroxide.

• 
  @hmm17587 ай бұрын

  I'm confused. What is the halogen for? Is it for heat?

• 
  @peppe_repairs7 ай бұрын

  It's for UV-B light that speeds up the process and also provides heat, that also helps with retrobright. Thanks for question!

• 
  @captnrobin275Ай бұрын

  @@peppe_repairs how many watt has it?

• 
  @mikolabest91458 ай бұрын

  Super😊 where did you buy can add link

• 
  @peppe_repairs7 ай бұрын

  www.aliexpress.com/item/1005005086786469.html

• 
  @geowallace975811 ай бұрын

  Boring nothing

• 
  @famcam666011 ай бұрын

  Hey Man I’ve ran into the same issue and nothing worked and you know what I traced down and changed out the capacitors that’s around the connections to the disc drive and now mine works like brand new and that’s the only thing I’ve replaced everything else is original, so best bet is to try and replace those if I could I’d sent you a pic of the exact ones I replaced.

• 
  @mtsauryberliannoor825211 ай бұрын

  😢🎉😢🎉😂❤😮

• 
  @amnoyponham774711 ай бұрын

  😅 ซ่อมยังไงให้เล่นไม่ได้สักเกมส์ 555 เห็นเปลี่ยนซิพแต่โหลดเกมส์ไม่ติดสักแผ่น งง....ครับ

• 
  @THANOS_SPA11 ай бұрын

  Bro everytime when I try to fix a controller the flex tape always is getting destroying 😅 so I can't play games bc the analog sticks parts are destroyed

• 
  @DumDoDoor Жыл бұрын

  It's amazing how yellow it appeared on the outside until you pop the lid open. Yeah some yellow is underneath but man it looks so white inside!

• 
  @peppe_repairs9 ай бұрын

  Old plastics and sunlight don't like each other

• 
  @anthonyboccardo2726 Жыл бұрын

  What was wrong with the replacement power supply? u only showed the original one. Would have been best u tested both power supplies to see if they had their 5V lines and the 12V output 1st before going onto the motherboard looking for issues, just saves time doing these steps 1st.

• 
  @peppe_repairs Жыл бұрын

  Hi! Thanks for asking.Idk what was wrong with it. Should be working but not. Iforgot to film when I was troubleshooting. Wiser next time!

• 
  @carloscaballero8475 Жыл бұрын

  Me encantó el video un saludo desde Honduras.

• 
  @Naitoraven951 Жыл бұрын

  Did you know that the spindle motor NEVER spin if the disc is not inserted on PU-7/PU-8/PU-16 modbo? If the servos doesn't detect anything, spindle motor mantain a standby mode. You have to insert a disc first and then try! Also, if the BTL was detective, the focus/tracking coil should not work. Instead, It pull up and down normally.

• 
  @user-qo3ss3yf7v Жыл бұрын

  What was a matter. The power. Or theft. Pasta

• 
  @peppe_repairs Жыл бұрын

  The powersupply was faulty

• 
  @alexmorarie07 Жыл бұрын

  Hey Peppe_ Repairs when you work on it again get a KSM 440 BAM Laser Assembly and when you set the Bias and Gain the Bias needs to be at 1.74 Millivolts and the Gain to 1.82 Millivolts with agame inserted to becable to set the Gain Properly and when you get that new laser you will need too just swap out the top cover to fit inside your Ps1 with no modding the case to fit it

• 
  @Naitoraven951 Жыл бұрын

  Your servos reference are useless. You need an oscilloscope for the FBIAS, RF, PUSH PLL.

• 
  @lopati28 Жыл бұрын

  I need help the blue light comes on and then turn off. Need help....thanks

• 
  @peppe_repairs Жыл бұрын

  Hard to say, it can be caused by many things.

• 
  @Adil-sv2xi Жыл бұрын

  Do you need to take out the plug and plug it back in to try turning it on again?

• 
  @jr1044 ай бұрын

  Попытайся снять блок питания , и если 12 вольтовый 2 железки согнуты друг от друга то согни друг к другу чуть чуть , и поставь плотно блок питания , мне помогло !

• 
  @iamu2203 Жыл бұрын

  ciao io ho un problema alla mia ps4 slim ho cambiato pasta termica pulito e richiuso tutto ma quando si accende fa 3 bip e poi si spegne di nuovo cosa può essere?

• 
  @richarddaley1 Жыл бұрын

  Power supply of apu

• 
  @redelune Жыл бұрын

  CECHZC2U A2

• 
  @Ict.admiral Жыл бұрын

  ج Did you know that someone like you in Algeria is an expert in repair who can get rich quickly?

• 
  @user-wd6ib1yo3m Жыл бұрын

  hzof🎉z x

• 
  @user-wd6ib1yo3m Жыл бұрын

  ATFtfifc

• 
  @user-wd6ib1yo3m Жыл бұрын

  AtF

• 
  @Steve.Cutler Жыл бұрын

  Another non narrated video. There's a reason these don't do as well as the ones with proper narration. I got bored about 2 minutes in..

• 
  @achmedalkhatib5003 Жыл бұрын

  Realy nice Work

• 
  @garyk1342 Жыл бұрын

  Resistors just break off???

• 
  @peppe_repairs Жыл бұрын

  Yep it is odd but i don't know what previous owner has done.. At least it was easy repair :D

• 
  @jayceasar2661 Жыл бұрын

  ? u never showed what u did to fix it?

• 
  @peppe_repairs Жыл бұрын

  I totally forgot to film it. It was only just soldering the resistor back to place.

• 
  @Lapidus1987 Жыл бұрын

  enough of this shit on yt...... 10000000000000 videos where everyone is Smart retro shit..... I loved Retro like 8 years ago.... now I'm Enough......

• 
  @smaza2009 Жыл бұрын

  At least speak describe what you are doing

• 
  @smaza2009 Жыл бұрын

  At least speak describe what you are doing