I have a 7kg beko dryer with the drawer at the bottom. I have been getting this error message 1 month after purchase. I had a technician out and watched exactly what he did and have had to take it apart myself a few times since. I had a new tech out and he could not find a problem. It is very frustrating having to clean every filter every time and empty the drawer at the back that is screwed in.
@edwingsuarez596018 сағат бұрын
Embuste sea serio respete la audiencia, falso
@clegeardКүн бұрын
I did that, I found a sock just like you in the tube below the machine, but when we plugged it back, the washing machine just started filling with water and won't stop unless we unplug it, what did we do wrong?
@gwynwilliams42222 күн бұрын
Hi George. Would the same cleaning procedure apply to an all in one hotpoint washer/dryer , or are the components different ? Thank you
@georgesworkshop8600Күн бұрын
Hi, No, washer dryers are completely different and their cleaning is more difficult.
@gwynwilliams4222Күн бұрын
Ok thanks for the info
@adriangeorgianstoica2 күн бұрын
Thank you, my washing machine is like new again. 👍
@georgesworkshop8600Күн бұрын
Glad to hear that!
@amitkapoor92793 күн бұрын
Tried opening the lid, but cannot find the switch to be moving either way let alone make a click sound. Model number - Zanussi flexi dose 6kg 1200 maximum spin ZWG7120K
@georgesworkshop8600Күн бұрын
Hi, All lid is moving backwards. Hit with your palm, you can’t damage it. So hit on the front to move back.
@claydo3643 күн бұрын
Haven't ya even got digital gauges....OMG how crappy 🤣🤣🤣🤣🤣🤣...😁🛵👑👌🤭🤭
@georgesworkshop8600Күн бұрын
I have, but I don’t think everyone has. I try to show solutions for all
@claydo364Күн бұрын
@@georgesworkshop8600 Damn and here I am thinking it's all about me😁
@absbse6 күн бұрын
I heard 2 loud bang noises and then a burning smell and immediately the machine switched off and tripped the electrics in the kitchen. What could the issue be ? Its a Hotpoint washer dryer
@georgesworkshop8600Күн бұрын
Hi, If this happened relatively shortly after started your machine, it could be the heating element. If after a while when washing program was in progress, then I can’t advise.
@absbseКүн бұрын
@@georgesworkshop8600 heating element has been changed a few weeks ago by Hotpoint engineer
@michelane92612 күн бұрын
What if there isn’t a reset button??
@georgesworkshop86009 күн бұрын
Hi Michael, If there is no button or no hole, then this option is not available. Maybe you need a new heating element or sensor?
@alastair444815 күн бұрын
Many, many thanks. Great explanatory video. Screeching Hotpoint about to expire. £4 bearing plate from Espares, fitted in 15 mins. Can only shudder at service engineer’s charges. Thanks again.
@georgesworkshop86009 күн бұрын
Good to hear you could fix it ! 👌
@jimski535815 күн бұрын
Thanks for fixing my beko 🤩
@georgesworkshop86009 күн бұрын
Thanks Jim! 👍
@scottdrever222916 күн бұрын
Brilliant video
@georgesworkshop86009 күн бұрын
Thanks Scott! 🤩
@ProjektYoda16 күн бұрын
So I've flowed your video and noticed my dryer doesnt have the clear pipe and the plastic connection that it slot onto at the top, how to find part snd how important is it if i change the pump as well
@georgesworkshop860016 күн бұрын
Hi, That’s the overflow tube of the water tank. If it’s fully loaded on that tube will go back the excessive water to the pump. That water in the pump will lift the floating switch and stop the machine.
@abdullkadirhaybe946517 күн бұрын
you realy helped me thanks you🙏
@georgesworkshop860016 күн бұрын
Thank you
@angiebaby998118 күн бұрын
Thank you.
@georgesworkshop860016 күн бұрын
You’re welcome ☺️
@livelikeaking19 күн бұрын
Literally could have just pulled the black piece out with a pair of needle nose pliers and reconnected it with the white twist cap after removing the blockage. Just did this with mine.
@georgesworkshop860016 күн бұрын
Good job 👍
@CarmenGarcia-uy6lb21 күн бұрын
Como desbloquear sabras
@georgesworkshop860016 күн бұрын
Thanks
@PandaMansArmy24 күн бұрын
Where does the blue wire connect to at the top?
@georgesworkshop860016 күн бұрын
Hi, I don’t know what do you mean, I didn’t disconnect any wire during this repair. Blue wires are visible at the bottom where the pump is.
@SkippyVinyls28 күн бұрын
I'm experiencing a similar noise with this model. So was the shoe lace the source of the noise? Did no parts needed replacing?
@georgesworkshop860027 күн бұрын
Hi, In my case the shoelace was the issue, I needn’t any parts to replace
@SkippyVinyls27 күн бұрын
@@georgesworkshop8600 thanks, I opened it up this afternoon and found some wear around the bearing. But also found some chewed wires. A mouse must have got inside. So I've to more parts to order.
@vice17abt28 күн бұрын
I hava a beko WTA8612XSW with the same shaking problem. The internal components, and the exterior is similar to this model, i presume. Tomorrow I will diagnose the problem. Thank you for the awesome video and your DIY method.
@georgesworkshop860027 күн бұрын
Thanks and good luck 🤞
@shamilauwaifo29 күн бұрын
Today I managed to changed the rubber sealer with help of my 12 yrs old boy. Thanks to your deatiled video we managed to save money of 300 +EUR which was asked bv Beko company technician . All went good putting back the second ring to the rubber was challenging but we did it with help of my mother+12yr😅.Thanks alot again for sharing video's like this very useful and detailed video
@georgesworkshop860027 күн бұрын
I’m glad to hear that you could fix it. 👍
@Pugwash666Ай бұрын
180 degrees out. Do your reserch before making a video 🙄
@lillybee2877Ай бұрын
My one the rimers are out on mechanic do you know why tis would happen.and do you knw were the sencer is
@georgesworkshop8600Ай бұрын
Hi Lilly, Sorry, but I don’t know what do you mean. Could you please give more information? Thanks
@lillybee2877Ай бұрын
I cleaned it and it worked well thanks
@karl53133Ай бұрын
Just got one of these mint but second hand watching these video's before I use , mine is 8kg 1600 I thought if you got a 8kg machine you could put upto 8kg in it but the manual seems to say you can only put 3 kg in on daily 59 wash am I reading that correctly as this seems daft if its a 8 kg machine must admit im a little confused regarding this and I can't seem to find any viedos for this machine that helps clarify this , so if someone can explain I would be very gratefull even on mixed it seems to say you can only put in 4kg so whats the point of it being a 8k machine...??? And will / could it damage it if you put more in even if its under 8kg doesn't any make sense to me ...
@georgesworkshop8600Ай бұрын
Hi Karl, The reason for that a 3kg dry load will become 7/8kg wet load. If you exceed the recommended weight limit a couple times it won’t happened too much, but if you regularly do the same that will shorten your machine life.
@karl53133Ай бұрын
@georgesworkshop8600 hmm ok thanks for the reply...
@50brian50Ай бұрын
Thanks for your help should have whatch video be the wife ordered a new one 😮😮😮😢
@georgesworkshop8600Ай бұрын
Next time? 😉
@MacShrikeАй бұрын
Hi George!, Thank you for the repair explanation. I have the same error. I slammed the door a few times and it started working again... for a while. The lock mechanism works; locks; unlocks fine(I have to wait a while before it unlocks). It just doesn't seem to be convinced the door is locked. Would you think that that is some dirt in the mechanism or the electronics board? Highest regards, Mac
@georgesworkshop8600Ай бұрын
Hi Mac, I don’t think is there any dirt in the lock mechanism. I’d rather say the stick that is going into the mechanism is worn ( rounded down) and the mechanism can’t hold it firmly.
@MacShrike29 күн бұрын
@@georgesworkshop8600 🤔yeah. Well I changed the doorlock. It still complains. It works when i push the door extra tight. Pin looks fine. Maybe the door is offset at the hinges. Maybe the lock is offset and i have to move it. Did some laundry though. So I can at least try to fix it in clean underwear 🤓 Thank for the help👍🏻🙋🏻♂️
@MacShrike18 күн бұрын
Ok. Update on update; It woul d appear that the angle of the door itself is messing with the latch sensor. So if the door itself is misaligned, the sensor doesn't register it. (See: Interstellar the movie =))
@victoriastaveley1783Ай бұрын
Thanks for this. Now have a fully functioning scooter
@georgesworkshop8600Ай бұрын
Thanks Victoria! 😉
@jimbo974Ай бұрын
Thanks 👍
@georgesworkshop8600Ай бұрын
You’re welcome
@richardhoggart3272Ай бұрын
Helped me bud, thought our drier was toast. Need to let it do the cool down at the end of its cycles.
@georgesworkshop8600Ай бұрын
Glad to hear that! 👍
@zakmalekАй бұрын
I used a straightend safety pin to reset it.
@georgesworkshop8600Ай бұрын
Good idea!
@zakmalekАй бұрын
Thank you, this worked a treat! Great video!
@georgesworkshop8600Ай бұрын
Thank you!🤩
@shamilauwaifoАй бұрын
Monday I will be receiving the rubber sealer which I ordered for Beko WTV 7712BLS hope that,too same way needs to change the rubber sealer.
@georgesworkshop8600Ай бұрын
Good luck, maybe will be better if you have extra hands around to hold the springs when you will return them. I get used to ask for help too
@osvaldoflores5554Ай бұрын
Looks good and legit for me (even procedure is not completely right) But ... How long "WD40" last after apply it? I reccomend you some good UV spray or even some ceramic coat. But Ill try your solution, propperly done. Ill share how long WD40 last (I bet you only few days with luck)
@georgesworkshop8600Ай бұрын
Hi, I wanted to show a domestic, cheaper solution . I know there are professional solutions with professional products
@TheSolarwavesАй бұрын
I had no heating so i took panels off then looked at heating element - and it was now working! I put it back together and put a few towels in. Checked it after a while - drum not turning! I saw belt snapped. Bought new belt put it on. Heating working and drum turning but Empty water light' on.....and no water in top collecting tray! I pulled that plastic cover off the back and water in bottom. I removed water. It's been kept a clean machine. blew down pipes all good. So, how do I know if the pump is not working? And how would a faulty pump affect the heating event?
@georgesworkshop8600Ай бұрын
Hi, Firstly, if the pump can’t pump the water into the upper tank it will stop the machine to avoid from more water in the bottom tank. May just little paddle need to replace not the whole pump.
@TheSolarwavesАй бұрын
@@georgesworkshop8600 Thanks will check that out
@TheSolarwavesАй бұрын
@@georgesworkshop8600 Hi I looked at the paddle it was worn. But i check on eBay the only ones i see all look the same as mine but my Indesit IDC8T3 is not listed on the eBay lists. Are they all the same? Just wondering if you knew at all...they're only a few quid anyway to buy.
@junkerdenb5063Ай бұрын
my wife found a bit of metal in the clothes and threw it away. When she described what it was I think it was the sensor bar. Do you have any ideas where it fits as I can’t really tell where it’s missing from?
@georgesworkshop8600Ай бұрын
Hi, One place could be where the daily filer located. You need to remove the filter like clean it. Or, in the inner plastic frame of the door, on the top. It’s better to remove the front cover while you fix it.
@jamesnewberry8872Ай бұрын
Good stuff 👏
@georgesworkshop8600Ай бұрын
Thanks James
@RetroModsАй бұрын
Top man👍👍Coins and crusty bits and the ball float thing was stuck. Cleaned and sorted..Thank you!
@georgesworkshop8600Ай бұрын
What a great news! I’m glad you could follow my advice
@hickorywind7859Ай бұрын
This looks like torture, but maybe I can do it after all Thanks for this great video.
@georgesworkshop8600Ай бұрын
Hello, I hope you’re able to fix it.
@breng121Ай бұрын
Thanks, fixed my issue.
@georgesworkshop8600Ай бұрын
Great job! 👏
@GunnerHillTXАй бұрын
Since he missed out a lot of relevant info... The battery box is held in position on the scooter by its power connector on the underside of the box, plus Velcro style tape, and gravity. To remove the screws on the bottom of the box... I can't tell the size, but he used a long 'cross head' screwdriver - also referred to as a 'Phillips head' screwdriver - and then a little magnet on the end of an extendable stalk. Assuming most people don't have a magnet... The screws will fall out of their holes when you turn over the box to be able to lift off the top cover. Make sure you keep track of them when they do fall out. If you put a small piece of sticky tape over each hole before you turn the box over, the screws will stick to that and not get lost. The two batteries inside the box are standard 'deep cycle sealed lead acid' batteries. They're '18-12' batteries. (Also known as '12v 18Ah' or 12 volt, 18 amp hour batteries.) You can get various different brands and styles/capacities on Amazon and eBay, Walmart, Autozone, Nappa, etc. He didn't share what size socket/wrenches he used to remove the wires from the batteries, but to be honest yours might be different anyway so that's forgivable. The batteries are held in place by more Velcro style tape which is why they needed to be wiggled & pulled up. He replaced the original batteries with two slightly heavier & longer lasting ones = 12v 22Ah. He did not replace or even reuse the Velcro tape on the bottom of the new batteries, but you really should use it, for safety sake. Many batteries come ready charged. However, they'll hold more charge and last longer if they're fully charged again before being used, ideally for 12 hours. That can also be done using an ordinary car battery charger before they're installed if you can get by with using the old ones for a while. You're welcome. 😁
@garygullikson6349Күн бұрын
You can buy long phillips screwdrivers with magnetic ends, they should work to remove screws from battery case.
@kzhemhАй бұрын
Hi. I followed your video tutorial and was able to replace the hose in my washing machine. Thanks! I have another problem now. My washing machine drum won't spin even when it is empty. It starts to fill with water and then stops at the point the drum would start spinning. I can drain the water so I know none of the hoses are clogged. The belt is on the wheel at the back of the machine correctly and not worn out. I plan on buying a new washing machine in two months when we move, and would really love for our current washing machine to last two more months if possible. Does this sound like something I could maybe fix myself? Do you think it's a sensor in the machine that controls the belt? That sounds like a job for a repair person. Thanks so much for your help.
@kzhemhАй бұрын
BTW. It is a front loading Blomberg machine. I checked the filter and it is not blocked.
@kzhemhАй бұрын
I also tried closing the door six times to do a reset, but that didn't help. The door does lock when I try to start a wash. Does that mean that the door lock is ok?
@georgesworkshop8600Ай бұрын
Hi, To replace the waste pipe shouldn’t have effect on spinning. Have you checked the carbon brush? If it’s worn out not enough power to move the drum. I have no other idea without testing.
@kzhemhАй бұрын
@@georgesworkshop8600 thanks! I looked up carbon brushes and it sounds like this could be the problem. I will probably have to call a repairman. Thanks for your help!!
@kzhemhАй бұрын
@@georgesworkshop8600 you were right! The carbon brushes needed to be replaced. I had a professional repairman do it. I will need to get a new washer eventually. What brands have the fewest problems and are the easiest to work on? Some seem like you have to take the whole washer apart to get to the parts inside. Thanks!
@mykoladerevianko3981Ай бұрын
Я замінив шланг і почалися проблеми з барабаном, починає дуже швидко крутитися і зупиняється
@georgesworkshop8600Ай бұрын
Hi, To replace the waste pipe shouldn’t have effect on spinning.
@user-rr7ij7hr4dАй бұрын
Love to watch an expert working going to strip the machine down tomorrow 18 /06/20024 thanks for video 😂😅😊
@georgesworkshop8600Ай бұрын
I hope you’ve succeeded your mission.
@seekethwisdom.84292 ай бұрын
Thank You!
@georgesworkshop86002 ай бұрын
Thanks! 👍
@Mohamed-xn8ep2 ай бұрын
Thank you so much. You saved me some money
@georgesworkshop86002 ай бұрын
Good to hear that you found it useful .
@Pareja_Nutrifit2 ай бұрын
Explained very well.. thank you for your time..
@georgesworkshop86002 ай бұрын
Thank you for sharing your experience! 👍
@marwanbmurad17912 ай бұрын
Thank you
@georgesworkshop86002 ай бұрын
Thanks! 👍
@erikaand50192 ай бұрын
E01,lock E02,fill E03,HEATER E04,forgot E05,ntc
@georgesworkshop86002 ай бұрын
Thank you
@MPM_News2 ай бұрын
Thanks but finding it so hard to put final spring on
@georgesworkshop86002 ай бұрын
I know, many times I must ask for helping hands.
@shantayeunique46122 ай бұрын
Thanks for sharing this demo! It has resolved the issue on my Candy SmartPro Tumble Dryer
Пікірлер
I have a 7kg beko dryer with the drawer at the bottom. I have been getting this error message 1 month after purchase. I had a technician out and watched exactly what he did and have had to take it apart myself a few times since. I had a new tech out and he could not find a problem. It is very frustrating having to clean every filter every time and empty the drawer at the back that is screwed in.
Embuste sea serio respete la audiencia, falso
I did that, I found a sock just like you in the tube below the machine, but when we plugged it back, the washing machine just started filling with water and won't stop unless we unplug it, what did we do wrong?
Hi George. Would the same cleaning procedure apply to an all in one hotpoint washer/dryer , or are the components different ? Thank you
Hi, No, washer dryers are completely different and their cleaning is more difficult.
Ok thanks for the info
Thank you, my washing machine is like new again. 👍
Glad to hear that!
Tried opening the lid, but cannot find the switch to be moving either way let alone make a click sound. Model number - Zanussi flexi dose 6kg 1200 maximum spin ZWG7120K
Hi, All lid is moving backwards. Hit with your palm, you can’t damage it. So hit on the front to move back.
Haven't ya even got digital gauges....OMG how crappy 🤣🤣🤣🤣🤣🤣...😁🛵👑👌🤭🤭
I have, but I don’t think everyone has. I try to show solutions for all
@@georgesworkshop8600 Damn and here I am thinking it's all about me😁
I heard 2 loud bang noises and then a burning smell and immediately the machine switched off and tripped the electrics in the kitchen. What could the issue be ? Its a Hotpoint washer dryer
Hi, If this happened relatively shortly after started your machine, it could be the heating element. If after a while when washing program was in progress, then I can’t advise.
@@georgesworkshop8600 heating element has been changed a few weeks ago by Hotpoint engineer
What if there isn’t a reset button??
Hi Michael, If there is no button or no hole, then this option is not available. Maybe you need a new heating element or sensor?
Many, many thanks. Great explanatory video. Screeching Hotpoint about to expire. £4 bearing plate from Espares, fitted in 15 mins. Can only shudder at service engineer’s charges. Thanks again.
Good to hear you could fix it ! 👌
Thanks for fixing my beko 🤩
Thanks Jim! 👍
Brilliant video
Thanks Scott! 🤩
So I've flowed your video and noticed my dryer doesnt have the clear pipe and the plastic connection that it slot onto at the top, how to find part snd how important is it if i change the pump as well
Hi, That’s the overflow tube of the water tank. If it’s fully loaded on that tube will go back the excessive water to the pump. That water in the pump will lift the floating switch and stop the machine.
you realy helped me thanks you🙏
Thank you
Thank you.
You’re welcome ☺️
Literally could have just pulled the black piece out with a pair of needle nose pliers and reconnected it with the white twist cap after removing the blockage. Just did this with mine.
Good job 👍
Como desbloquear sabras
Thanks
Where does the blue wire connect to at the top?
Hi, I don’t know what do you mean, I didn’t disconnect any wire during this repair. Blue wires are visible at the bottom where the pump is.
I'm experiencing a similar noise with this model. So was the shoe lace the source of the noise? Did no parts needed replacing?
Hi, In my case the shoelace was the issue, I needn’t any parts to replace
@@georgesworkshop8600 thanks, I opened it up this afternoon and found some wear around the bearing. But also found some chewed wires. A mouse must have got inside. So I've to more parts to order.
I hava a beko WTA8612XSW with the same shaking problem. The internal components, and the exterior is similar to this model, i presume. Tomorrow I will diagnose the problem. Thank you for the awesome video and your DIY method.
Thanks and good luck 🤞
Today I managed to changed the rubber sealer with help of my 12 yrs old boy. Thanks to your deatiled video we managed to save money of 300 +EUR which was asked bv Beko company technician . All went good putting back the second ring to the rubber was challenging but we did it with help of my mother+12yr😅.Thanks alot again for sharing video's like this very useful and detailed video
I’m glad to hear that you could fix it. 👍
180 degrees out. Do your reserch before making a video 🙄
My one the rimers are out on mechanic do you know why tis would happen.and do you knw were the sencer is
Hi Lilly, Sorry, but I don’t know what do you mean. Could you please give more information? Thanks
I cleaned it and it worked well thanks
Just got one of these mint but second hand watching these video's before I use , mine is 8kg 1600 I thought if you got a 8kg machine you could put upto 8kg in it but the manual seems to say you can only put 3 kg in on daily 59 wash am I reading that correctly as this seems daft if its a 8 kg machine must admit im a little confused regarding this and I can't seem to find any viedos for this machine that helps clarify this , so if someone can explain I would be very gratefull even on mixed it seems to say you can only put in 4kg so whats the point of it being a 8k machine...??? And will / could it damage it if you put more in even if its under 8kg doesn't any make sense to me ...
Hi Karl, The reason for that a 3kg dry load will become 7/8kg wet load. If you exceed the recommended weight limit a couple times it won’t happened too much, but if you regularly do the same that will shorten your machine life.
@georgesworkshop8600 hmm ok thanks for the reply...
Thanks for your help should have whatch video be the wife ordered a new one 😮😮😮😢
Next time? 😉
Hi George!, Thank you for the repair explanation. I have the same error. I slammed the door a few times and it started working again... for a while. The lock mechanism works; locks; unlocks fine(I have to wait a while before it unlocks). It just doesn't seem to be convinced the door is locked. Would you think that that is some dirt in the mechanism or the electronics board? Highest regards, Mac
Hi Mac, I don’t think is there any dirt in the lock mechanism. I’d rather say the stick that is going into the mechanism is worn ( rounded down) and the mechanism can’t hold it firmly.
@@georgesworkshop8600 🤔yeah. Well I changed the doorlock. It still complains. It works when i push the door extra tight. Pin looks fine. Maybe the door is offset at the hinges. Maybe the lock is offset and i have to move it. Did some laundry though. So I can at least try to fix it in clean underwear 🤓 Thank for the help👍🏻🙋🏻♂️
Ok. Update on update; It woul d appear that the angle of the door itself is messing with the latch sensor. So if the door itself is misaligned, the sensor doesn't register it. (See: Interstellar the movie =))
Thanks for this. Now have a fully functioning scooter
Thanks Victoria! 😉
Thanks 👍
You’re welcome
Helped me bud, thought our drier was toast. Need to let it do the cool down at the end of its cycles.
Glad to hear that! 👍
I used a straightend safety pin to reset it.
Good idea!
Thank you, this worked a treat! Great video!
Thank you!🤩
Monday I will be receiving the rubber sealer which I ordered for Beko WTV 7712BLS hope that,too same way needs to change the rubber sealer.
Good luck, maybe will be better if you have extra hands around to hold the springs when you will return them. I get used to ask for help too
Looks good and legit for me (even procedure is not completely right) But ... How long "WD40" last after apply it? I reccomend you some good UV spray or even some ceramic coat. But Ill try your solution, propperly done. Ill share how long WD40 last (I bet you only few days with luck)
Hi, I wanted to show a domestic, cheaper solution . I know there are professional solutions with professional products
I had no heating so i took panels off then looked at heating element - and it was now working! I put it back together and put a few towels in. Checked it after a while - drum not turning! I saw belt snapped. Bought new belt put it on. Heating working and drum turning but Empty water light' on.....and no water in top collecting tray! I pulled that plastic cover off the back and water in bottom. I removed water. It's been kept a clean machine. blew down pipes all good. So, how do I know if the pump is not working? And how would a faulty pump affect the heating event?
Hi, Firstly, if the pump can’t pump the water into the upper tank it will stop the machine to avoid from more water in the bottom tank. May just little paddle need to replace not the whole pump.
@@georgesworkshop8600 Thanks will check that out
@@georgesworkshop8600 Hi I looked at the paddle it was worn. But i check on eBay the only ones i see all look the same as mine but my Indesit IDC8T3 is not listed on the eBay lists. Are they all the same? Just wondering if you knew at all...they're only a few quid anyway to buy.
my wife found a bit of metal in the clothes and threw it away. When she described what it was I think it was the sensor bar. Do you have any ideas where it fits as I can’t really tell where it’s missing from?
Hi, One place could be where the daily filer located. You need to remove the filter like clean it. Or, in the inner plastic frame of the door, on the top. It’s better to remove the front cover while you fix it.
Good stuff 👏
Thanks James
Top man👍👍Coins and crusty bits and the ball float thing was stuck. Cleaned and sorted..Thank you!
What a great news! I’m glad you could follow my advice
This looks like torture, but maybe I can do it after all Thanks for this great video.
Hello, I hope you’re able to fix it.
Thanks, fixed my issue.
Great job! 👏
Since he missed out a lot of relevant info... The battery box is held in position on the scooter by its power connector on the underside of the box, plus Velcro style tape, and gravity. To remove the screws on the bottom of the box... I can't tell the size, but he used a long 'cross head' screwdriver - also referred to as a 'Phillips head' screwdriver - and then a little magnet on the end of an extendable stalk. Assuming most people don't have a magnet... The screws will fall out of their holes when you turn over the box to be able to lift off the top cover. Make sure you keep track of them when they do fall out. If you put a small piece of sticky tape over each hole before you turn the box over, the screws will stick to that and not get lost. The two batteries inside the box are standard 'deep cycle sealed lead acid' batteries. They're '18-12' batteries. (Also known as '12v 18Ah' or 12 volt, 18 amp hour batteries.) You can get various different brands and styles/capacities on Amazon and eBay, Walmart, Autozone, Nappa, etc. He didn't share what size socket/wrenches he used to remove the wires from the batteries, but to be honest yours might be different anyway so that's forgivable. The batteries are held in place by more Velcro style tape which is why they needed to be wiggled & pulled up. He replaced the original batteries with two slightly heavier & longer lasting ones = 12v 22Ah. He did not replace or even reuse the Velcro tape on the bottom of the new batteries, but you really should use it, for safety sake. Many batteries come ready charged. However, they'll hold more charge and last longer if they're fully charged again before being used, ideally for 12 hours. That can also be done using an ordinary car battery charger before they're installed if you can get by with using the old ones for a while. You're welcome. 😁
You can buy long phillips screwdrivers with magnetic ends, they should work to remove screws from battery case.
Hi. I followed your video tutorial and was able to replace the hose in my washing machine. Thanks! I have another problem now. My washing machine drum won't spin even when it is empty. It starts to fill with water and then stops at the point the drum would start spinning. I can drain the water so I know none of the hoses are clogged. The belt is on the wheel at the back of the machine correctly and not worn out. I plan on buying a new washing machine in two months when we move, and would really love for our current washing machine to last two more months if possible. Does this sound like something I could maybe fix myself? Do you think it's a sensor in the machine that controls the belt? That sounds like a job for a repair person. Thanks so much for your help.
BTW. It is a front loading Blomberg machine. I checked the filter and it is not blocked.
I also tried closing the door six times to do a reset, but that didn't help. The door does lock when I try to start a wash. Does that mean that the door lock is ok?
Hi, To replace the waste pipe shouldn’t have effect on spinning. Have you checked the carbon brush? If it’s worn out not enough power to move the drum. I have no other idea without testing.
@@georgesworkshop8600 thanks! I looked up carbon brushes and it sounds like this could be the problem. I will probably have to call a repairman. Thanks for your help!!
@@georgesworkshop8600 you were right! The carbon brushes needed to be replaced. I had a professional repairman do it. I will need to get a new washer eventually. What brands have the fewest problems and are the easiest to work on? Some seem like you have to take the whole washer apart to get to the parts inside. Thanks!
Я замінив шланг і почалися проблеми з барабаном, починає дуже швидко крутитися і зупиняється
Hi, To replace the waste pipe shouldn’t have effect on spinning.
Love to watch an expert working going to strip the machine down tomorrow 18 /06/20024 thanks for video 😂😅😊
I hope you’ve succeeded your mission.
Thank You!
Thanks! 👍
Thank you so much. You saved me some money
Good to hear that you found it useful .
Explained very well.. thank you for your time..
Thank you for sharing your experience! 👍
Thank you
Thanks! 👍
E01,lock E02,fill E03,HEATER E04,forgot E05,ntc
Thank you
Thanks but finding it so hard to put final spring on
I know, many times I must ask for helping hands.
Thanks for sharing this demo! It has resolved the issue on my Candy SmartPro Tumble Dryer
Great to hear that! Thanks