Пікірлер

• 
  @KPVFarmerКүн бұрын

  Thanks for the review. I hope to be adding a cat as our next addition. Looks like a Swiss Army knife

• 
  @jackc72624 күн бұрын

  I cant tell but I hope those are Anodeless gas risers you are using. If they are single wall Anode type will need to attach anode bags to them. Also it is good practice not to let trace wire touch polyethylene pipe because in rare cases lighting strikes to riser will conduct through trace wire melting a hole in polyethylene pipe.

• 
  @gnarson5 күн бұрын

  Was hoping to see how you braced it all. Especially without having a bottom tie

• 
  @OutlawWoodworking4 күн бұрын

  It has a bottom tie that screws into footing and then I used 2x4 with adjustable legs to brace the whole thing

• 
  @revanalfarizi66428 күн бұрын

  Mesinnya mantap👍,,,namun sayangnya tidak di jual di Indonesia

• 
  @OutlawWoodworking7 күн бұрын

  Thanks for watching

• 
  @carlcarlssen429919 күн бұрын

  I'm from the US and hang no flags.

• 
  @OutlawWoodworking19 күн бұрын

  Why not

• 
  @davidsandvik789521 күн бұрын

  Much faster to sucker nail a 2x4 to footer.....form one side of the wall and brace.......put snap ties and then form other side of wall and then sucker nail other side with a 2x4 in footer

• 
  @FelixValdez-k4p24 күн бұрын

  P

• 
  @anthonyhernandez239625 күн бұрын

  What are them metal deal called the one that lock the forms

• 
  @OutlawWoodworking25 күн бұрын

  Jahn brackets A-brackets and C-brackets

• 
  @anthonyhernandez239625 күн бұрын

  @@OutlawWoodworking thank budd I pour foundations but taking the challenge on building a safe room

• 
  @RPhPlastics28 күн бұрын

  LEIGH makes a Vacuum and Router Support for PC 4200 Series Dovetail Jigs Item #166417 Model VRS 1200

• 
  @AstheticWorld0o29 күн бұрын

  Please provide this file

• 
  @user-mi7rj5bu7bАй бұрын

  ОТЛИЧНАЯ РАБОТА !!!

• 
  @HiFiInsiderАй бұрын

  where is the new ones made in? Japan or China?

• 
  @OutlawWoodworkingАй бұрын

  Not sure

• 
  @DougVeazey-zl3xzАй бұрын

  I hope to make a piece this beautiful someday. My current shop is under the shade trees. Could you advise me on how to prevent the white part of the cedar from cracking out? I'm making cedar walking sticks and when I grind and sand, the red is fine, but when I leave some white wood it's cracks.

• 
  @OutlawWoodworkingАй бұрын

  The only thing I try to do is make sure moisture is very low before I work with wood , good luck

• 
  @DougVeazey-zl3xzАй бұрын

  @@OutlawWoodworking thank you.

• 
  @mattsmock3515Ай бұрын

  What did you do to square your walls? Also what about making them plumb, did you have to brace them? Thanks

• 
  @OutlawWoodworkingАй бұрын

  I used a lazer ,working by myself the one that helped me the most Stabilla 02180

• 
  @larrymcmillan1910Ай бұрын

  Why did you use a start depth of .05

• 
  @OutlawWoodworkingАй бұрын

  I find that when I’m cutting fine letters it seems to work better, I don’t always do that . Just once in a while and usually I’ll test it on some cheaper wood

• 
  @JRCoronado242 ай бұрын

  i would have used 3/4 inch sheets

• 
  @OutlawWoodworking2 ай бұрын

  They were 3/4”

• 
  @p__jay2 ай бұрын

  whats the difference between the E50 and the E50 EM?

• 
  @OutlawWoodworking2 ай бұрын

  Not sure

• 
  @stevew39782 ай бұрын

  The engine seemed to stall a lot.

• 
  @OutlawWoodworking2 ай бұрын

  Yah,if you put too big to fast I can stall

• 
  @dangoras91522 ай бұрын

  Looks good brother

• 
  @OutlawWoodworking2 ай бұрын

  Thanks my friend, really appreciate it

• 
  @aintnomyth2 ай бұрын

  Nice video, would love to hear more about if it’s square out of the box or a long term update.

• 
  @OutlawWoodworking2 ай бұрын

  I should do a updated video,been building a little house recently and using it a lot , it was square out of box , still square, at this point I think it’s been 1-1/2 years and it’s been great

• 
  @narrvick2 ай бұрын

  How has it held up so far?

• 
  @OutlawWoodworking2 ай бұрын

  Still running really good,use it every day

• 
  @narrvick2 ай бұрын

  Thanks for the update. I know what I’m getting this weekend then 😂

• 
  @michaeljacobs94322 ай бұрын

  Offset vector around your models and you would have saved yourself a ton of time.

• 
  @OutlawWoodworking2 ай бұрын

  Thanks,I’ll try that , always learning 👍

• 
  @michaeljacobs94322 ай бұрын

  @@OutlawWoodworking I would offset by 1in min, this allows you to easily sand any ghosting marks. then run a pocket tool path for the remainder. Under the modeling section you can create a vector from model.

• 
  @bisco0423 ай бұрын

  how did you bend the nose guard?? Part #11...mine isn't pre bent...it's as straight as it comes

• 
  @OutlawWoodworking2 ай бұрын

  Mine came pre bent

• 
  @fcalin213 ай бұрын

  2000 dollars are allot of money.

• 
  @OutlawWoodworking3 ай бұрын

  Yah ,it was worth it for me by myself, however if you’re only going to use it on one job , probably not worth it, I’ve used it on 6 jobs so far so it’s slowly paying for itself

• 
  @donalddosch16563 ай бұрын

  What would you say are the benefits, financial and ease of building, of using a single plane roof as opposed to a traditional peak roof?

• 
  @OutlawWoodworking3 ай бұрын

  Cheaper to use trusses ,I was basically trying to match the garage that I already built, don’t know if there is any benefit ,I wanted the inside to be vaulted.

• 
  @couerl3 ай бұрын

  I have the big brother, a Rugcel 2000 lb and I love it. Mine didn't come with any fairlede? though and I'm bummed about that.

• 
  @mattbowers53423 ай бұрын

  Enjoying the videos sir, I think I’ve commented on your posts from my Bowers Custom Woodworking account occasionally too. Just wanted you to know as one of your first subscribers that I’m quietly still watching.

• 
  @OutlawWoodworking3 ай бұрын

  Thanks , I really appreciate it

• 
  @TheDavidarlen3 ай бұрын

  That is a big help I will try that tomorrow. Unfortunately mine is leaking and I can not find a rebuild kit for it. The cost is $845..49 PN 6697935 Mine is a Bobcat E35 2015. I believe this control will fit other models I should tear into it a little bit and see if I can replace a couple of O-rings to fix the leak.

• 
  @OutlawWoodworking3 ай бұрын

  Good luck, it can be confusing some times

• 
  @psychedelicguitarartbyjima38503 ай бұрын

  Thanks.

• 
  @BenMiller-dt8vq3 ай бұрын

  What was this mill valued at? They’re pretty hard to find.

• 
  @OutlawWoodworking3 ай бұрын

  Probably still worth 5k to 7k I never see too many available

• 
  @stevehopper60683 ай бұрын

  A little less music and more explanation would do wonders.

• 
  @you78mas3 ай бұрын

  Thank you for the video! How is the saw with hardwood? Is its 1HP motor strong enough to cut hardwood easily or not?

• 
  @OutlawWoodworking3 ай бұрын

  I haven’t had any trouble cutting hardwood

• 
  @accountcontact77644 ай бұрын

  Do you just get the logs from your land? I wonder if local sawmill saves the small stuff or if they just turn it to sawdust

• 
  @OutlawWoodworking4 ай бұрын

  This wood came from my land , however you could go to where they do logging and they leave a lot

• 
  @bearkun64144 ай бұрын

  Hi, nice video, can i ask if how long did this tool last before some parts need replacement?

• 
  @OutlawWoodworking4 ай бұрын

  Still working,been happy with it

• 
  @bearkun64144 ай бұрын

  @@OutlawWoodworking Wow, even the batteries lasted this long? Thank you for replying! 😁

• 
  @ScottHedges-ku7sm4 ай бұрын

  Excellent video!! I'm having the exact same problem with the exact same model of Bobcat.

• 
  @mairan9144 ай бұрын

  I will use my Honda eu2000i generator as the power source. Do you think it has enough power for the saw? Thanks.

• 
  @OutlawWoodworking4 ай бұрын

  Plenty of power with Honda generator

• 
  @murlkinal76164 ай бұрын

  Thank you for doing this video. I just bought an e35 with lower hours and have the weird track speed issue. I asked a bobcat mechanic and he had no idea. Ill try this adjustment and see how it goes

• 
  @glengarritysr99974 ай бұрын

  You mentioned you have a bad back. I don't know how tall you are but do you find the table height to be adequate? I believe the 2255 is all I need but it comes standard at 28 inch deck height while you can get the 3255 at 32 inch deck height. Thanks!

• 
  @OutlawWoodworking4 ай бұрын

  It’s still a little low , could be higher

• 
  @chase61194 ай бұрын

  Do you prefer this over liquid nails?

• 
  @OutlawWoodworking4 ай бұрын

  It was pretty easy to use , not sure which is stronger,probably need to do some test with it

• 
  @chase61194 ай бұрын

  @@OutlawWoodworking should be fairly comparable in strength. I love the ease of use with these guns

• 
  @daltonboyko5 ай бұрын

  Would you go with a bigger one cause ive watched your supposed to slice at an angle and it looked like it was only big enough to pull straight back

• 
  @OutlawWoodworking4 ай бұрын

  I think I would get a bigger one 👍

• 
  @MarkJonesRanger5 ай бұрын

  I enjoyed the video turned out really cool

• 
  @OutlawWoodworking5 ай бұрын

  Thanks very much

• 
  @MarkJonesRanger5 ай бұрын

  In your rough toolpath you can include several bits your big bit your second smaller bit and third bit all in that one to toolpath a path

• 
  @OutlawWoodworking5 ай бұрын

  Thanks ,always learning

• 
  @LosChapinesTv5 ай бұрын

  de con trucion

• 
  @OutlawWoodworking5 ай бұрын

  Thanks

• 
  @happyviking37815 ай бұрын

  paint doesn't stick to mdf too great sometimes. I think that was your issue.

• 
  @OutlawWoodworking5 ай бұрын

  I think your right

• 
  @fricknjeep5 ай бұрын

  hi there ,just got one nice machine ,working on a back bumper ,i am a bad driver good show john

• 
  @OutlawWoodworking5 ай бұрын

  Thanks 👍 I’ve already smashed the back and need to build a back bumper also lol

• 
  @fricknjeep5 ай бұрын

  i made a vew videos mighr be able to catch a few to help john@@OutlawWoodworking

• 
  @jancausey3915 ай бұрын

  Hey man! We are neighbors. I live just around the corner from you. Big fisherman. Let’s go sometime.

• 
  @garyrafferty76254 ай бұрын

  Jan, if you had one full day to fish the Piedra River in late-summer (en route to somewhere else), what section would you fish? ... up in the headwaters (Williams Creek)? ... main canyon upstream from Hwy 160? ... or the Ute Reservation waters?

• 
  @Robert-vz3rx5 ай бұрын

  Nagraj filmik z CS1400,,plis''

• 
  @mauricedebelin62325 ай бұрын

  Superb work, and the various stages involved in achieving the result are well described. A very interesting video.

• 
  @OutlawWoodworking5 ай бұрын

  Thank you, appreciate the nice comment

• 
  @roofermarc15 ай бұрын

  I want one of these for my miter saw only. Have it turn on and off when I make a cut automatically. Thanks for the idea.

• 
  @OutlawWoodworking5 ай бұрын

  Thanks

• 
  @roofermarc15 ай бұрын

  I have an older version of this it's a 24'' model. Bought it in 99' and it's all red. I have an adjustable through dovetail template and 1/2'' half blind templates only. Never used the through dovetail but the half blinds work great. Thanks for posting.

• 
  @OutlawWoodworking5 ай бұрын

  Thanks